tailscale

Commit Graph

Author	SHA1	Message	Date
Charlotte Brandhorst-Satzkorn	4e86857313	ssh/tailssh: add ssh session recording failed event type This change introduces a SSHSessionRecordingFailed event type that is used when a session recording fails to start or fails during a session, and the on failure indicates that it should fail open. Updates tailscale/corp#9967 Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>	2 years ago
Charlotte Brandhorst-Satzkorn	024d48d9c1	tailcfg: bump capability version This change bumps the capability version to 62, after support for sending SSHEventNotificationRequests to control via noise for failure events was introduced. Updates tailscale/corp#9967 Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>	2 years ago
Charlotte Brandhorst-Satzkorn	29ded8f9f9	ssh/tailssh,tailcfg: add connID to ssheventnotifyrequest and castheader This change adds a ConnectionID field to both SSHEventNotifyRequest and CastHeader that identifies the ID of a connection to the SSH server. Updates tailscale/corp#9967 Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>	2 years ago
Charlotte Brandhorst-Satzkorn	2804327074	tailcfg: update rename SSHFailureNotifyRequest and add EventType This change renames SSHFailureNotifyRequest to SSHEventNotifyRequest to better reflect the additional events we could add in the future. This change also adds an EventType used to catagories the events. Updates tailscale/corp#9967 Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>	2 years ago
Maisem Ali	7778d708a6	ssh/tailssh: handle dialing multiple recorders and failing open This adds support to try dialing out to multiple recorders each with a 5s timeout and an overall 30s timeout. It also starts respecting the actions `OnRecordingFailure` field if set, if it is not set it fails open. Updates tailscale/corp#9967 Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Maisem Ali	f66ddb544c	tailcfg: add SSHRecorderFailureAction and SSHRecordingFailureNotifyRequest This allows control to specify how to handle situations where the recorder isn't available. Updates tailscale/corp#9967 Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Maisem Ali	64bbf1738e	tailcfg: make SelfNodeV4MasqAddrForThisPeer a pointer This makes `omitempty` actually work, and saves bytes in each map response. Updates tailscale/corp#8020 Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Charlotte Brandhorst-Satzkorn	c573bef0aa	tailcfg,wgengine: add initial support for WireGuard only peers A peer can have IsWireGuardOnly, which means it will not support DERP or Disco, and it must have Endpoints filled in order to be usable. In the present implementation only the first Endpoint will be used as the bestAddr. Updates tailscale/corp#10351 Co-authored-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com> Co-authored-by: James Tucker <james@tailscale.com> Signed-off-by: James Tucker <james@tailscale.com>	2 years ago
shayne	43f7ec48ca	funnel: change references from alpha to beta (#7613 ) Updates CLI and docs to reference Funnel as beta Signed-off-by: Shayne Sweeney <shayne@tailscale.com>	2 years ago
Maisem Ali	f61b306133	tailcfg: add Node.SelfNodeV4MasqAddrForThisPeer This only adds the field, to be used in a future commit. Updates tailscale/corp#8020 Co-authored-by: Melanie Warrick <warrick@tailscale.com> Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Charlotte Brandhorst-Satzkorn	1b78dc1f33	tailcfg: move recorders field from SSHRule to SSHAction Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>	2 years ago
Charlotte Brandhorst-Satzkorn	3efd83555f	tailcfg: add recorders field to SSHRule struct This change introduces the Recorders field to the SSHRule struct. The field is used to store and define addresses where the ssh recorder is located. Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>	2 years ago
Maisem Ali	c87782ba9d	cmd/k8s-operator: drop trailing dot in tagged node name Also update tailcfg docs. Updates #5055 Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Maisem Ali	56526ff57f	tailcfg: bump capver for 1.38 Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Maisem Ali	223713d4a1	tailcfg,all: add and use Node.IsTagged() Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Maisem Ali	3ff44b2307	ipn: add Funnel port check from nodeAttr Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Maisem Ali	49c206fe1e	tailcfg,hostinfo: add App field to identify tsnet uses This allows us to differentiate between the various tsnet apps that we have like `golinks` and `k8s-operator`. Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Mihai Parparita	62f4df3257	net/interfaces, net/netns: add node attributes to control default interface getting and binding With #6566 we started to more aggressively bind to the default interface on Darwin. We are seeing some reports of the wrong cellular interface being chosen on iOS. To help with the investigation, this adds to knobs to control the behavior changes: - CapabilityDebugDisableAlternateDefaultRouteInterface disables the alternate function that we use to get the default interface on macOS and iOS (implemented in tailscale/corp#8201). We still log what it would have returned so we can see if it gets things wrong. - CapabilityDebugDisableBindConnToInterface is a bigger hammer that disables binding of connections to the default interface altogether. Updates #7184 Updates #7188 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	2 years ago
David Crawshaw	8cf2805cca	tailcfg, localapi: plumb device token to server Updates tailscale/corp#8940 Signed-off-by: David Crawshaw <crawshaw@tailscale.com>	2 years ago
Brad Fitzpatrick	38b32be926	tailcfg: add wire fields/docs for resuming streaming map sessions No implementation yet. Updates #7175 Change-Id: Id242d47cdd83afe4d254c8c5826f058fe39c8bfd Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Will Norris	71029cea2d	all: update copyright and license headers This updates all source files to use a new standard header for copyright and license declaration. Notably, copyright no longer includes a date, and we now use the standard SPDX-License-Identifier header. This commit was done almost entirely mechanically with perl, and then some minimal manual fixes. Updates #6865 Signed-off-by: Will Norris <will@tailscale.com>	2 years ago
Andrew Dunham	2703d6916f	net/netns: add functionality to bind outgoing sockets based on route table When turned on via environment variable (off by default), this will use the BSD routing APIs to query what interface index a socket should be bound to, rather than binding to the default interface in all cases. Updates #5719 Updates #5940 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: Ib4c919471f377b7a08cd3413f8e8caacb29fee0b	2 years ago
Kris Brandow	d5cb016cef	tailcfg: add caps and SSH action for SSH hauling Add capabilities and an SSH action for SSH session hauling. Updates #7069 Signed-off-by: Kris Brandow <kris@tailscale.com>	2 years ago
Andrew Dunham	44d73ce932	ipn/ipnlocal, net/dnscache: allow configuring dnscache logging via capability This allows users to temporarily enable/disable dnscache logging via a new node capability, to aid in debugging strange connectivity issues. Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I46cf2596a8ae4c1913880a78d0033f8b668edc08	2 years ago
Brad Fitzpatrick	b6aa1c1f22	envknob, hostinfo, ipn/ipnlocal: add start of opt-in remote update support Updates #6907 Change-Id: I85db4f6f831dd5ff7a9ef4bfa25902607e0c1558 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	64547b2b86	tailcfg,hostinfo: add Hostinfo.Machine and Hostinfo.GoArchVar For detecting a non-ideal binary running on the current CPU. And for helping detect the best Synology package to update to. Updates #6995 Change-Id: I722f806675b60ce95364471b11c388150c0d4aea Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	6edf357b96	all: start groundwork for using capver for localapi & peerapi Updates #7015 Change-Id: I3d4c11b42a727a62eaac3262a879f29bb4ce82dd Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Andrew Dunham	dd7057682c	tailcfg: bump capver for Node.Expired Updates #6932 Change-Id: I96c2467fa49201eb3d8df5cb36486370f598928c Signed-off-by: Andrew Dunham <andrew@du.nham.ca>	2 years ago
Andrew Dunham	6f18fbce8d	tailcfg: document zero value for KeyExpiry Change-Id: I50889f0205ecf66c415f50f9019c190448c991fc Signed-off-by: Andrew Dunham <andrew@du.nham.ca>	2 years ago
Andrew Dunham	1e67947cfa	control/controlclient, tailcfg: add Node.Expired field, set for expired nodes Nodes that are expired, taking into account the time delta calculated from MapResponse.ControlTime have the newly-added Expired boolean set. For additional defense-in-depth, also replicate what control does and clear the Endpoints and DERP fields, and additionally set the node key to a bogus value. Updates #6932 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: Ia2bd6b56064416feee28aef5699ca7090940662a	2 years ago
Brad Fitzpatrick	69c0b7e712	ipn/ipnlocal: add c2n handler to flush logtail for support debugging Updates tailscale/corp#8564 Change-Id: I0c619d4007069f90cffd319fba66bd034d63e84d Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Tom DNetto	f1ab11e961	ipn/ipnlocal,tailcfg: introduce capability to gate TKA init paths Previously, `TAILSCALE_USE_WIP_CODE` was needed to hit a bunch of the TKA paths. With this change: - Enablement codepaths (NetworkLockInit) and initialization codepaths (tkaBootstrapFromGenesisLocked via tkaSyncIfNeeded) require either the WIP envknob or CapabilityTailnetLockAlpha. - Normal operation codepaths (tkaSyncIfNeeded, tkaFilterNetmapLocked) require TKA to be initialized, or either-or the envknob / capability. - Auxillary commands (ie: changing tka keys) require TKA to be initialized. The end result is that it shouldn't be possible to initialize TKA (or subsequently use any of its features) without being sent the capability or setting the envknob on tailscaled yourself. I've also pulled out a bunch of unnecessary checks for CanSupportNetworkLock(). Signed-off-by: Tom DNetto <tom@tailscale.com>	2 years ago
shayne	0c4c66948b	cmd/tailscale/cli: Improve messaging when Funnel is unavailable. (#6502 ) There are three specific requirements for Funnel to work: 1) They must accept an invite. 2) They must enable HTTPS. 3) The "funnel" node attribute must be appropriately set up in the ACLs. Signed-off-by: Shayne Sweeney <shayne@tailscale.com>	2 years ago
Brad Fitzpatrick	20b27df4d0	tailcfg, ipn, controlclient: add MapResponse.ClientVersion, plumb to IPN bus Updates #6480 Change-Id: I6321071425cd091148d8140d1eb24dd536bb7984 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
shayne	d1e1c025b0	tailcfg: add TailscaleFunnelEnabled to HostInfo (#6414 ) Adding this convenience for tailscale/corp#8015 and to avoid leaking WireIngress. Signed-off-by: Shayne Sweeney <shayne@tailscale.com>	2 years ago
shayne	a97369f097	cmd/tailscale/cli: flesh out serve CLI and tests (#6304 ) Signed-off-by: Shayne Sweeney <shayne@tailscale.com>	2 years ago
Maisem Ali	296e712591	tailcfg: add CapabilityDebug Updates tailscale/corp#7948 Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Brad Fitzpatrick	b08f37d069	tailcfg: add Hostinfo.WireIngress bool Yet unused. Future optimization for control. Updates tailscale/corp#7515 Change-Id: Icd755aa8b1d6ca61d16dfc124c28c9c56ebdfee5 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Maisem Ali	a255a08ea6	tailcfg: bump capver for ingress Updates tailscale/corp#7515 Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Brad Fitzpatrick	9dfb0916c2	ipn/ipnlocal, tailcfg: wire up ingress peerapi Updates tailscale/corp#7515 Co-authored-by: Shayne Sweeney <shayne@tailscale.com> Change-Id: I7eac7b4ac37fd8e8a9e0469594c1e9e7dd0da666 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Maisem Ali	0759d78f12	tailcfg: bump CurrentCapabilityVersion for EarlyNoise Updates #5972 Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Brad Fitzpatrick	e55ae53169	tailcfg: add Node.UnsignedPeerAPIOnly to let server mark node as peerapi-only capver 48 Change-Id: I20b2fa81d61ef8cc8a84e5f2afeefb68832bd904 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	988c1f0ac7	control/controlclient, tailcfg: add support for EarlyNoise payload before http/2 Not yet used, but skipped over, parsed, and tested. Updates #5972 Change-Id: Icd00196959ce266ae16a6c9244bd5e458e2c2947 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Tom DNetto	d98305c537	cmd,ipn/ipnlocal,tailcfg: implement TKA disablement * Plumb disablement values through some of the internals of TKA enablement. * Transmit the node's TKA hash at the end of sync so the control plane understands each node's head. * Implement /machine/tka/disable RPC to actuate disablement on the control plane. There is a partner PR for the control server I'll send shortly. Signed-off-by: Tom DNetto <tom@tailscale.com>	2 years ago
Brad Fitzpatrick	ea24895e08	client/tailscale/apitype, tailcfg: delete never used mysterious PerDomain field It does nothing and never did and I don't think anybody remembers what the original goal for it was. Updates #5229 (fixes, but need to clean it up in another repo too) Change-Id: I81cc6ff44d6d2888bc43e9145437f4c407907ea6 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Andrew Dunham	74693793be	net/netcheck, tailcfg: track whether OS supports IPv6 We had previously added this to the netcheck report in #5087 but never copied it into the NetInfo struct. Additionally, add it to log lines so it's visible to support. Change-Id: Ib6266f7c6aeb2eb2a28922aeafd950fe1bf5627e Signed-off-by: Andrew Dunham <andrew@tailscale.com>	2 years ago
Tom DNetto	227777154a	control/controlclient,ipn/ipnlocal,tailcfg: rotate node-key signature on register CAPVER 47 Signed-off-by: Tom DNetto <tom@tailscale.com>	2 years ago
Kristoffer Dalby	01ebef0f4f	tailcfg: add views for ControlDialPlan (#5843 )	2 years ago
Brad Fitzpatrick	1841d0bf98	wgengine/magicsock: make debug-level stuff not logged by default And add a CLI/localapi and c2n mechanism to enable it for a fixed amount of time. Updates #1548 Change-Id: I71674aaf959a9c6761ff33bbf4a417ffd42195a7 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Josh Soref	d4811f11a0	all: fix spelling mistakes Signed-off-by: Josh Soref <2119212+jsoref@users.noreply.github.com>	2 years ago
Brad Fitzpatrick	9bdf0cd8cd	ipn/ipnlocal: add c2n /debug/{goroutines,prefs,metrics} * and move goroutine scrubbing code to its own package for reuse * bump capver to 45 Change-Id: I9b4dfa5af44d2ecada6cc044cd1b5674ee427575 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	fb4e23506f	control/controlclient: stop restarting map polls on health change At some point we started restarting map polls on health change, but we don't remember why. Maybe it was a desperate workaround for something. I'm not sure it ever worked. Rather than have a haunted graveyard, remove it. In its place, though, and somewhat as a safety backup, send those updates over the HTTP/2 noise channel if we have one open. Then if there was a reason that a map poll restart would help we could do it server-side. But mostly we can gather error stats and show machine-level health info for debugging. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Andrew Dunham	e1bdbfe710	tailcfg, control/controlhttp, control/controlclient: add ControlDialPlan field (#5648 ) * tailcfg, control/controlhttp, control/controlclient: add ControlDialPlan field This field allows the control server to provide explicit information about how to connect to it; useful if the client's link status can change after the initial connection, or if the DNS settings pushed by the control server break future connections. Change-Id: I720afe6289ec27d40a41b3dcb310ec45bd7e5f3e Signed-off-by: Andrew Dunham <andrew@tailscale.com>	2 years ago
Aaron Klotz	acc7baac6d	tailcfg, util/deephash: add DataPlaneAuditLogID to Node and DomainDataPlaneAuditLogID to MapResponse We're adding two log IDs to facilitate data-plane audit logging: a node-specific log ID, and a domain-specific log ID. Updated util/deephash/deephash_test.go with revised expectations for tailcfg.Node. Updates https://github.com/tailscale/corp/issues/6991 Signed-off-by: Aaron Klotz <aaron@tailscale.com>	2 years ago
Maisem Ali	d5781f61a9	ipn/ipnlocal: return usernames when Tailscale SSH is enabled It was checking if the sshServer was initialized as a proxy, but that could either not have been initialized yet or Tailscale SSH could have been disabled after intialized. Also bump tailcfg.CurrentCapabilityVersion Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Maisem Ali	054ef4de56	tailcfg: mark CapabilityFileSharingTarget as inter-node Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
phirework	5c42990c2f	wgengine/magicsock: add client flag and envknob to disable heartbeat (#5638 ) Baby steps towards turning off heartbeat pings entirely as per #540. This doesn't change any current magicsock functionality and requires additional changes to send/disco paths before the flag can be turned on. Updates #540 Change-Id: Idc9a72748e74145b068d67e6dd4a4ffe3932efd0 Signed-off-by: Jenny Zhang <jz@tailscale.com> Signed-off-by: Jenny Zhang <jz@tailscale.com>	2 years ago
Brad Fitzpatrick	45a3de14a6	cmd/tailscaled, tailcfg, hostinfo: add flag to disable logging + support As noted in #5617, our documented method of blocking log.tailscale.io DNS no longer works due to bootstrap DNS. Instead, provide an explicit flag (--no-logs-no-support) and/or env variable (TS_NO_LOGS_NO_SUPPORT=true) to explicitly disable logcatcher uploads. It also sets a bit on Hostinfo to say that the node is in that mode so we can end any support tickets from such nodes more quickly. This does not yet provide an easy mechanism for users on some platforms (such as Windows, macOS, Synology) to set flags/env. On Linux you'd used /etc/default/tailscaled typically. Making it easier to set flags for other platforms is tracked in #5114. Fixes #5617 Fixes tailscale/corp#1475 Change-Id: I72404e1789f9e56ec47f9b7021b44c025f7a373a Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	d5e7e3093d	hostinfo, tailcfg: split Hostinfo.OSVersion into separate fields Stop jamming everything into one string. Fixes #5578 Change-Id: I7dec8d6c073bddc7dc5f653e3baf2b4bf6b68378 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	58abae1f83	net/dns/{publicdns,resolver}: add NextDNS DoH support NextDNS is unique in that users create accounts and then get user-specific DNS IPs & DoH URLs. For DoH, the customer ID is in the URL path. For IPv6, the IP address includes the customer ID in the lower bits. For IPv4, there's a fragile "IP linking" mechanism to associate your public IPv4 with an assigned NextDNS IPv4 and that tuple maps to your customer ID. We don't use the IP linking mechanism. Instead, NextDNS is DoH-only. Which means using NextDNS necessarily shunts all DNS traffic through 100.100.100.100 (programming the OS to use 100.100.100.100 as the global resolver) because operating systems can't usually do DoH themselves. Once it's in Tailscale's DoH client, we then connect out to the known NextDNS IPv4/IPv6 anycast addresses. If the control plane sends the client a NextDNS IPv6 address, we then map it to the corresponding NextDNS DoH with the same client ID, and we dial that DoH server using the combination of v4/v6 anycast IPs. Updates #2452 Change-Id: I3439d798d21d5fc9df5a2701839910f5bef85463 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	255c0472fb	tailcfg: reformat CurrentCapabilityVersion to be a bulleted list gofmt in 1.19 is now opinionated about structured text formatting in comments. It did not like our style and kept fighting us whenever we changed these lines. Give up the fight and be a bulleted list for it. See: * https://go.dev/doc/go1.19#go-doc and * https://go.dev/doc/comment Updates #4872 Change-Id: Ifae431218471217168c003ab3b4e03c394ca8105 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Tom DNetto	9132b31e43	tailcfg: refactor/implement wire structs for TKA Signed-off-by: Tom DNetto <tom@tailscale.com>	2 years ago
Brad Fitzpatrick	761163815c	tailcfg: add Hostinfo.Userspace{,Router} bits Change-Id: Iad47f904872f2df146c1f63945f79cfddeac7fe8 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	9f6c8517e0	net/dns: set OS DNS to 100.100.100.100 for route-less ExtraRecords [cap 41] If ExtraRecords (Hosts) are specified without a corresponding split DNS route and global DNS is specified, then program the host OS DNS to use 100.100.100.100 so it can blend in those ExtraRecords. Updates #1543 Change-Id: If49014a5ecc8e38978ff26e54d1f74fe8dbbb9bc Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	c66f99fcdc	tailcfg, control/controlclient, ipn/ipnlocal: add c2n (control-to-node) system This lets the control plane can make HTTP requests to nodes. Then we can use this for future things rather than slapping more stuff into MapResponse, etc. Change-Id: Ic802078c50d33653ae1f79d1e5257e7ade4408fd Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	f1c9812188	tailcfg: add Hostinfo.GoVersion So next time something like #5340 happens we can identify all affected nodes and have the control plane send them health warnings. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Tom DNetto	f81723ceac	tailcfg: implement wire format for map request/response tka comms Signed-off-by: Tom DNetto <tom@tailscale.com>	2 years ago
Tom DNetto	472529af38	tka: optimize common case of processing updates built from head Signed-off-by: Tom DNetto <tom@tailscale.com>	2 years ago
Tom DNetto	039def3b50	ipn,tailcfg: transmit NodeID in tka init RPCs Needed to identify the node. A serverside-check the machine key (used to authenticate the noise session) is that of the specified NodeID ensures the authenticity of the request. Signed-off-by: Tom DNetto <tom@tailscale.com>	2 years ago
Tom DNetto	facafd8819	client,cmd/tailscale,ipn,tka,types: implement tka initialization flow This PR implements the client-side of initializing network-lock with the Coordination server. Signed-off-by: Tom DNetto <tom@tailscale.com>	2 years ago
Tom DNetto	18edd79421	control/controlclient,tailcfg: [capver 40] create KeySignature field in tailcfg.Node We calve out a space to put the node-key signature (used on tailnets where network lock is enabled). Signed-off-by: Tom DNetto <tom@tailscale.com>	2 years ago
Aaron Klotz	b997304bf6	tailcfg: add CapabilityDataPlaneAuditLogs. We're going to want to enable audit logging on a per-Tailnet basis. When this happens, we want control to inform the Tailnet's clients of this capability. Signed-off-by: Aaron Klotz <aaron@tailscale.com>	2 years ago
Juan Font	ffc67806ef	tailcfg: bump capver for clients to talk Noise over any HTTPS port [capver 39] Signed-off-by: Juan Font Alonso <juanfontalonso@gmail.com>	2 years ago
Brad Fitzpatrick	90555c5cb2	tailcfg, control/controlclient: add PingRequest.URLIsNoise [capver 38] Change-Id: I19bb63b6d99e96b2f9fd2c440afcc31d38137ded Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	b33c337baa	tailcfg: actually bump capver to 37, add test I documented capver 37 in `4ee64681a` but forgot to bump the actual constant. I've done this previously too, so add a test to prevent it from happening again. Change-Id: I6f7659db1243d30672121a384beb386d9f9f5b98 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	4ee64681ad	tailcfg, control/controlclient: make Debug settings sticky in a map session [capver 37] Fixes #4843 Change-Id: I3accfd91be474ac745cb47f5d6e866c37d5c5d2d Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Andrew Dunham	f0d6f173c9	net/netcheck: try ICMP if UDP is blocked (#5056 ) Signed-off-by: Andrew Dunham <andrew@du.nham.ca>	2 years ago
Tom DNetto	4001d0bf25	assorted: plumb tka initialization & network-lock key into tailscaled - A network-lock key is generated if it doesn't already exist, and stored in the StateStore. The public component is communicated to control during registration. - If TKA state exists on the filesystem, a tailnet key authority is initialized (but nothing is done with it for now). Signed-off-by: Tom DNetto <tom@tailscale.com>	2 years ago
Brad Fitzpatrick	7c7e23d87a	control/controlclient, tailcfg: add 6 more patchable Node fields [capver 36] Change-Id: Iae997a9a98a5dd841bc41fa91227d5a7dd476a25 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Maisem Ali	eb32847d85	tailcfg: add CapabilityFileSharingTarget to identify FileTargets This adds the inverse to CapabilityFileSharingSend so that senders can identify who they can Taildrop to. Updates #2101 Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Brad Fitzpatrick	116f55ff66	all: gofmt for Go 1.19 Updates #5210 Change-Id: Ib02cd5e43d0a8db60c1f09755a8ac7b140b670be Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Maisem Ali	fa2fbaf3aa	tailcfg: add views for SSHRule and SSHPrincipal Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Brad Fitzpatrick	a12aad6b47	all: convert more code to use net/netip directly perl -i -npe 's,netaddr.IPPrefixFrom,netip.PrefixFrom,' $(git grep -l -F netaddr.) perl -i -npe 's,netaddr.IPPortFrom,netip.AddrPortFrom,' $(git grep -l -F netaddr. ) perl -i -npe 's,netaddr.IPPrefix,netip.Prefix,g' $(git grep -l -F netaddr. ) perl -i -npe 's,netaddr.IPPort,netip.AddrPort,g' $(git grep -l -F netaddr. ) perl -i -npe 's,netaddr.IP\b,netip.Addr,g' $(git grep -l -F netaddr. ) perl -i -npe 's,netaddr.IPv6Raw\b,netip.AddrFrom16,g' $(git grep -l -F netaddr. ) goimports -w . Then delete some stuff from the net/netaddr shim package which is no longer neeed. Updates #5162 Change-Id: Ia7a86893fe21c7e3ee1ec823e8aba288d4566cd8 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	7eaf5e509f	net/netaddr: start migrating to net/netip via new netaddr adapter package Updates #5162 Change-Id: Id7bdec303b25471f69d542f8ce43805328d56c12 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	d8cb5aae17	tailcfg, control/controlclient: add tailcfg.PeersChangedPatch [capver 33] This adds a lighter mechanism for endpoint updates from control. Change-Id: If169c26becb76d683e9877dc48cfb35f90cc5f24 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	b7f1fe7b0d	tailcfg: remove old DNS fields The control plane server doesn't send these to modern clients so we don't need them in the tree. The server has its own serialization code to generate legacy MapResponses when needed. Change-Id: Idd1e5d96ddf9d4306f2da550d20b77f0c252817a Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	2491fe1afe	tailcfg: add missing omitempty annotation to PopBrowserURL Change-Id: I8e752afd5bf009c17aae1b53650479b37c3232bd Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
David Anderson	c1cb3efbba	net/netcheck: test for OS IPv6 support as well as connectivity. This lets us distinguish "no IPv6 because the device's ISP doesn't offer IPv6" from "IPv6 is unavailable/disabled in the OS". Signed-off-by: David Anderson <danderson@tailscale.com>	2 years ago
Brad Fitzpatrick	6b71568eb7	util/cloudenv: add Azure support & DNS IPs And rewrite cloud detection to try to do only zero or one metadata discovery request for all clouds, only doing a first (or second) as confidence increases. Work remains for Windows, but a start. And add Cloud to tailcfg.Hostinfo, which helped with testing using "tailcfg debug hostinfo". Updates #4983 (Linux only) Updates #4984 Change-Id: Ib03337089122ce0cb38c34f724ba4b4812bc614e Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	99ed54926b	tailcfg: define some Node.Capabilities about SSH, its config Updates #3802 Change-Id: Icb4ccbc6bd1c6304013bfc553d04007844a5c0bf Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	4005134263	tailcfg: clarify some of the MapRequest variants Change-Id: Ia09bd69856e372c3a6b64cda7ddb34029b32a11b Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Mihai Parparita	b788a5ba7e	tailcfg: add HostinfoView version of TailscaleSSHEnabled Signed-off-by: Mihai Parparita <mihai@tailscale.com>	3 years ago
Ross Zurowski	bb67999808	tailcfg: add TailscaleSSHEnabled helper check (#4812 ) This commit adds a helper to check if Tailscale SSH is enabled. We're currently checking the SSH_HostKeys field in a few places, but later plan to add an explicit bool. This helper makes the check and any future changes easier. Signed-off-by: Ross Zurowski <ross@rosszurowski.com>	3 years ago
Brad Fitzpatrick	4d85cf586b	cmd/tailscale, ipn/ipnlocal: add "peerapi" ping type For debugging when stuff like #4750 isn't working. RELNOTE=tailscale ping -peerapi Change-Id: I9c52c90fb046e3ab7d2b121387073319fbf27b99 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Maisem Ali	d04afc697c	cmd/viewer,types/views: add support for views of maps Updates #4635 Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Maisem Ali	9f3ad40707	tailcfg: use cmd/viewer instead of cmd/cloner. Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Maisem Ali	fd99c54e10	tailcfg,all: change structs to []*dnstype.Resolver Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Maisem Ali	679415f3a8	tailcfg: move views into tailcfg_view.go Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Maisem Ali	e409e59a54	cmd/cloner,util/codegen: refactor cloner internals to allow reuse Also run go generate again for Copyright updates. Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
James Tucker	ae483d3446	wgengine, net/packet, cmd/tailscale: add ICMP echo Updates tailscale/corp#754 Signed-off-by: James Tucker <james@tailscale.com>	3 years ago

1 2 3 4 5 ...

355 Commits (7783a960e866a1f0e6979ff76e07c896095aa419)