tailscale

Commit Graph

Author	SHA1	Message	Date
Brad Fitzpatrick	c52905abaa	wgengine/magicsock: log less on no-op disco route switches Also, renew trustBestAddrUntil even if latency isn't better.	4 years ago
Brad Fitzpatrick	0f0ed3dca0	wgengine/magicsock: clean up discovery logging Updates #483	4 years ago
Brad Fitzpatrick	056fbee4ef	wgengine/magicsock: add TS_DEBUG_OMIT_LOCAL_ADDRS knob to force STUN use only For debugging.	4 years ago
Brad Fitzpatrick	e03cc2ef57	wgengine/magicsock: populate discoOfAddr upon receiving ping frames Updates #483	4 years ago
Brad Fitzpatrick	275a20f817	wgengine/magicsock: keep discoOfAddr populated, use it for findEndpoint Update the mapping from ip:port to discokey, so when we retrieve a packet from the network, we can find the same conn.Endpoint that we gave to wireguard-go previously, without making it think we've roamed. (We did, but we're not using its roaming.) Updates #483	4 years ago
Brad Fitzpatrick	77e89c4a72	wgengine/magicsock: handle CallMeMaybe discovery mesages Roughly feature complete now. Testing and polish remains. Updates #483	4 years ago
Brad Fitzpatrick	710ee88e94	wgengine/magicsock: add timeout on discovery pings, clean up state Updates #483	4 years ago
Brad Fitzpatrick	77d3ef36f4	wgengine/magicsock: hook up discovery messages, upgrade to LAN works Ping messages now go out somewhat regularly, pong replies are sent, and pong replies are now partially handled enough to upgrade off DERP to LAN. CallMeMaybe packets are sent & received over DERP, but aren't yet handled. That's next (and regular maintenance timers), and then WAN should work. Updates #483	4 years ago
Brad Fitzpatrick	9b8ca219a1	wgengine/magicsock: remove allocs in UDP write, use new netaddr.PutUDPAddr The allocs were only introduced yesterday with a TODO. Now they're gone again.	4 years ago
Brad Fitzpatrick	7b3c0bb7f6	wgengine/magicsock: fix crash reading DERP packet Starting at yesterday's `e96f22e560` (convering some UDPAddrs to IPPorts), Conn.ReceiveIPv4 could return a nil addr, which would make its way through wireguard-go and blow up later. The DERP read path wasn't initializing the addr result parameter any more, and wgRecvAddr wasn't checking it either. Fixes #515	4 years ago
Brad Fitzpatrick	47b4a19786	wgengine/magicsock: use netaddr.ParseIPPort instead of net.ResolveUDPAddr	4 years ago
Brad Fitzpatrick	f7124c7f06	wgengine/magicsock: start of discoEndpoint state tracking Updates #483	4 years ago
Brad Fitzpatrick	92252b0988	wgengine/magicsock: add a little LRU cache for netaddr.IPPort lookups And while plumbing, a bit of discovery work I'll need: the endpointOfAddr map to map from validated paths to the discoEndpoint. Not being populated yet. Updates #483	4 years ago
Brad Fitzpatrick	2d6e84e19e	net/netcheck, wgengine/magicsock: replace more UDPAddr with netaddr.IPPort	4 years ago
Brad Fitzpatrick	9070aacdee	wgengine/magicsock: minor comments & logging & TODO changes	4 years ago
Brad Fitzpatrick	e96f22e560	wgengine/magicsock: start handling disco message, use netaddr.IPPort more Updates #483	4 years ago
Brad Fitzpatrick	a83ca9e734	wgengine/magicsock: cache precomputed nacl/box shared keys Updates #483	4 years ago
Brad Fitzpatrick	a975e86bb8	wgengine/magicsock: add new endpoint type used for discovery-supporting peers This adds a new magicsock endpoint type only used when both sides support discovery (that is, are advertising a discovery key). Otherwise the old code is used. So far the new code only communicates over DERP as proof that the new code paths are wired up. None of the actually discovery messaging is implemented yet. Support for discovery (generating and advertising a key) are still behind an environment variable for now. Updates #483	4 years ago
Brad Fitzpatrick	103c06cc68	wgengine/magicsock: open discovery naclbox messages from known peers And track known peers. Doesn't yet do anything with the messages. (nor does it send any yet) Start of docs on the message format. More will come in subsequent changes. Updates #483	4 years ago
Brad Fitzpatrick	23e74a0f7a	wgengine, magicsock, tstun: don't regularly STUN when idle (mobile only for now) If there's been 5 minutes of inactivity, stop doing STUN lookups. That means NAT mappings will expire, but they can resume later when there's activity again. We'll do this for all platforms later. Updates tailscale/corp#320 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	fe50cd0c48	ipn, wgengine: plumb NetworkMap down to magicsock Now we can have magicsock make decisions based on tailcfg.Debug settings sent by the server. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	53fb25fc2f	all: generate discovery key, plumb it around Not actually used yet. Updates #483	4 years ago
Brad Fitzpatrick	abd79ea368	derp: reduce DERP memory use; don't require callers to pass in memory to use The magicsock derpReader was holding onto 65KB for each DERP connection forever, just in case. Make the derp{,http}.Client be in charge of memory instead. It can reuse its bufio.Reader buffer space.	4 years ago
Brad Fitzpatrick	280e8884dd	wgengine/magicsock: limit redundant log spam on packets from low-pri addresses Fixes #407 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	9e5d79e2f1	wgengine/magicsock: drop a bytes.Buffer sync.Pool, use logger.ArgWriter instead	5 years ago
Brad Fitzpatrick	db2a216561	wgengine/magicsock: don't log on UDP send errors if address family known missing Fixes #376	5 years ago
Brad Fitzpatrick	9e3ad4f79f	net/netns: add package for start of network namespace support And plumb in netcheck STUN packets. TODO: derphttp, logs, control. Updates #144 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	a428656280	wgengine/magicsock: don't report v4 localhost addresses on IPv6-only systems Updates #376	5 years ago
Avery Pennarun	30e5c19214	magicsock: work around race condition initializing .Regions[]. Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	5 years ago
Brad Fitzpatrick	b0c10fa610	stun, netcheck: move under net	5 years ago
Brad Fitzpatrick	e6b84f2159	all: make client use server-provided DERP map, add DERP region support Instead of hard-coding the DERP map (except for cmd/tailscale netcheck for now), get it from the control server at runtime. And make the DERP map support multiple nodes per region with clients picking the first one that's available. (The server will balance the order presented to clients for load balancing) This deletes the stunner package, merging it into the netcheck package instead, to minimize all the config hooks that would've been required. Also fix some test flakes & races. Fixes #387 (Don't hard-code the DERP map) Updates #388 (Add DERP region support) Fixes #399 (wgengine: flaky tests) Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	e6d0c92b1d	wgengine/magicsock: clean up earlier fix a bit Move WaitReady from `fc88e34f42` into the test code, and keep the derp-reading goroutine named for debugging.	5 years ago
Avery Pennarun	fc88e34f42	wgengine/magicsock/tests: wait for home DERP connection before sending packets. This fixes an elusive test flake. Fixes #161. Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	5 years ago
Avery Pennarun	08acb502e5	Add tstest.PanicOnLog(), and fix various problems detected by this. If a test calls log.Printf, 'go test' horrifyingly rearranges the output to no longer be in chronological order, which makes debugging virtually impossible. Let's stop that from happening by making log.Printf panic if called from any module, no matter how deep, during tests. This required us to change the default error handler in at least one http.Server, as well as plumbing a bunch of logf functions around, especially in magicsock and wgengine, but also in logtail and backoff. To add insult to injury, 'go test' also rearranges the output when a parent test has multiple sub-tests (all the sub-test's t.Logf is always printed after all the parent tests t.Logf), so we need to screw around with a special Logf that can point at the "current" t (current_t.Logf) in some places. Probably our entire way of using subtests is wrong, since 'go test' would probably like to run them all in parallel if you called t.Parallel(), but it definitely can't because the're all manipulating the shared state created by the parent test. They should probably all be separate toplevel tests instead, with common setup/teardown logic. But that's a job for another time. Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	5 years ago
Brad Fitzpatrick	fefd7e10dc	types/structs: add structs.Incomparable annotation, use it where applicable Shotizam before and output queries: sqlite> select sum(size) from bin where func like 'type..%'; 129067 => 120216	5 years ago
Brad Fitzpatrick	e1526b796e	ipn: don't listen on the unspecified address in test To avoid the Mac firewall dialog of (test) death. See `4521a59f30` which I added to help debug this.	5 years ago
Brad Fitzpatrick	18017f7630	ipn, wgengine/magicsock: be more idle when in Stopped state with no peers (Previously as #288, but with some more.) Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
David Anderson	9669b85b41	wgengine/magicsock: wait for endpoint updater goroutine when closing. Fixes #204. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
Brad Fitzpatrick	268d331cb5	wgengine/magicsock: prune key.Public-keyed on peer removals Fixes #215	5 years ago
Brad Fitzpatrick	00d053e25a	wgengine/magicsock: fix slow memory leak as peer endpoints move around Updates #215	5 years ago
Brad Fitzpatrick	7fc97c5493	wgengine/magicsock: use netaddr more In prep for deleting from the ever-growing maps.	5 years ago
Brad Fitzpatrick	6fb30ff543	wgengine/magicsock: start using inet.af/netaddr a bit	5 years ago
Brad Fitzpatrick	a7e7c7b548	wgengine/magicsock: close derp connections on rebind Fixes #276 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	614261d00d	wgengine/magicsock: reset AddrSet states on Rebind Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Blake Gentry	e19287f60f	wgengine/magicsock: fix Conn docs type reference The docs on magicsock.Conn stated that they implemented the wireguard/device.Bind interface, yet this type does not exist. In reality, the Conn type implements the wireguard/conn.Bind interface. I also fixed a small typo in the same file. Signed-off-by: Blake Gentry <blakesgentry@gmail.com>	5 years ago
Brad Fitzpatrick	322499473e	cmd/tailscaled, wgengine, ipn: add /debug/ipn handler with world state Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	2d48f92a82	wgengine/magicsock: re-stun every [20,27] sec, not 28 28 is cutting it close, and we think jitter will help some spikes we're seeing. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	577f321c38	wgengine/magicsock: revise derp fallback logic Revision to earlier `6284454ae5` Don't be sticky if we have no peers. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	6284454ae5	wgengine/magicsock: if UDP blocked, pick DERP where most peers are Updates #207 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	d321190578	wgengine/magicsock: stringify [IPv6]:port normally in AddrSet.String	5 years ago

1 2 3

136 Commits (771eb05bcb53b27fdcb8882dd462989053162e60)