Commit Graph

95 Commits (6e967446e412a5f54d9a5888d6514520ff4e40ae)

Author SHA1 Message Date
Brad Fitzpatrick 6e967446e4 tsd: add package with System type to unify subsystem init, discovery
This is part of an effort to clean up tailscaled initialization between
tailscaled, tailscaled Windows service, tsnet, and the mac GUI.

Updates #8036

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
1 year ago
Maisem Ali 3ae7140690 net/tstun: handle exit nodes in NAT configs
In the case where the exit node requires SNAT, we would SNAT all traffic not just the
traffic meant to go through the exit node. This was a result of the default route being
added to the routing table which would match basically everything.

In this case, we need to account for all peers in the routing table not just the ones
that require NAT.

Fix and add a test.

Updates tailscale/corp#8020

Signed-off-by: Maisem Ali <maisem@tailscale.com>
1 year ago
Andrew Dunham 04a3118d45 net/tstun: add tests for captureHook
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I630f852d9f16c951c721b34f2bc4128e68fe9475
1 year ago
Maisem Ali 64bbf1738e tailcfg: make SelfNodeV4MasqAddrForThisPeer a pointer
This makes `omitempty` actually work, and saves bytes in each map response.

Updates tailscale/corp#8020

Signed-off-by: Maisem Ali <maisem@tailscale.com>
1 year ago
Tom DNetto 6a627e5a33 net, wgengine/capture: encode NAT addresses in pcap stream
Signed-off-by: Tom DNetto <tom@tailscale.com>
1 year ago
James Tucker 40fa2a420c envknob,net/tstun,wgengine: use TS_DEBUG_MTU consistently
Noted on #5915 TS_DEBUG_MTU was not used consistently everywhere.
Extract the default into a function that can apply this centrally and
use it everywhere.

Added envknob.Lookup{Int,Uint}Sized to make it easier to keep CodeQL
happy when using converted values.

Updates #5915

Signed-off-by: James Tucker <james@tailscale.com>
1 year ago
Maisem Ali 985535aebc net/tstun,wgengine/*: add support for NAT to routes
This adds support to make exit nodes and subnet routers work
when in scenarios where NAT is required.

It also updates the NATConfig to be generated from a `wgcfg.Config` as
that handles merging prefs with the netmap, so it has the required information
about whether an exit node is already configured and whether routes are accepted.

Updates tailscale/corp#8020

Signed-off-by: Maisem Ali <maisem@tailscale.com>
1 year ago
Maisem Ali d1d5d52b2c net/tstun/table: add initial RoutingTable implementation
It is based on `*tempfork/device.AllowedIPs`.

Updates tailscale/corp#8020

Signed-off-by: Maisem Ali <maisem@tailscale.com>
1 year ago
Jordan Whited 27e37cf9b3
go.mod, net/tstun, wgengine/magicsock: update wireguard-go (#7712)
This commit updates the wireguard-go dependency to pull in fixes for
the tun package, specifically 052af4a and aad7fca.

Signed-off-by: Jordan Whited <jordan@tailscale.com>
1 year ago
Maisem Ali d2fd101eb4 net/tstun: only log natConfig on changes
Updates tailscale/corp#8020

Signed-off-by: Maisem Ali <maisem@tailscale.com>
1 year ago
Maisem Ali 0bf8c8e710 net/tstun: use p.Buffer() in more places
Updates tailscale/corp#8020

Signed-off-by: Maisem Ali <maisem@tailscale.com>
1 year ago
Maisem Ali bb31fd7d1c net/tstun: add inital support for NAT v4
This adds support in tstun to utitilize the SelfNodeV4MasqAddrForThisPeer and
perform the necessary modifications to the packet as it passes through tstun.

Currently this only handles ICMP, UDP and TCP traffic.
Subnet routers and Exit Nodes are also unsupported.

Updates tailscale/corp#8020

Co-authored-by: Melanie Warrick <warrick@tailscale.com>
Signed-off-by: Maisem Ali <maisem@tailscale.com>
1 year ago
Maisem Ali 535fad16f8 net/tstun: rename filterIn/filterOut methods to be more descriptive
Updates tailscale/corp#8020

Signed-off-by: Maisem Ali <maisem@tailscale.com>
1 year ago
Tom DNetto 2ca6dd1f1d wgengine: start logging DISCO frames to pcap stream
Signed-off-by: Tom DNetto <tom@tailscale.com>
1 year ago
Tom DNetto 99b9d7a621 all: implement pcap streaming for datapath debugging
Updates: tailscale/corp#8470

Signed-off-by: Tom DNetto <tom@tailscale.com>
1 year ago
Will Norris 71029cea2d all: update copyright and license headers
This updates all source files to use a new standard header for copyright
and license declaration.  Notably, copyright no longer includes a date,
and we now use the standard SPDX-License-Identifier header.

This commit was done almost entirely mechanically with perl, and then
some minimal manual fixes.

Updates #6865

Signed-off-by: Will Norris <will@tailscale.com>
1 year ago
andig 5f96d6211a Remove redundant type declaration
Signed-off-by: andig <cpuidle@gmx.de>
1 year ago
Brad Fitzpatrick 6d85a94767 net/{packet,tstun}: fix typo in test helper docs
Change-Id: Ifc1684fe77c7d2585e049e0dfd7340910c47a67a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
1 year ago
Brad Fitzpatrick c1a2e2c380 net/{packet,tstun},wgengine/filter: fix unknown IP protocol handling
01b90df2fa added SCTP support before
(with explicit parsing for ports) and
69de3bf7bf tried to add support for
arbitrary IP protocols (as long as the ACL permited a port of "*",
since we might not know how to find ports from an arbitrary IP
protocol, if it even has such a concept). But apparently that latter
commit wasn't tested end-to-end enough. It had a lot of tests, but the
tests made assumptions about layering that either weren't true, or
regressed since 1.20. Notably, it didn't remove the (*Filter).pre
bidirectional filter that dropped all "unknown" protocol packets both
leaving and entering, even if there were explicit protocol matches
allowing them in.

Also, don't map all unknown protocols to 0. Keep their IP protocol
number parsed so it's matchable by later layers. Only reject illegal
things.

Fixes #6423
Updates #2162
Updates #2163

Change-Id: I9659b3ece86f4db51d644f9b34df78821758842c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
1 year ago
andig 14e8afe444 go.mod, etc: bump gvisor
Fixes #6554

Change-Id: Ia04ae37a47b67fa57091c9bfe1d45a1842589aa8
Signed-off-by: andig <cpuidle@gmx.de>
1 year ago
Joe Tsai d9df023e6f
net/connstats: enforce maximum number of connections (#6760)
The Tailscale logging service has a hard limit on the maximum
log message size that can be accepted.
We want to ensure that netlog messages never exceed
this limit otherwise a client cannot transmit logs.

Move the goroutine for periodically dumping netlog messages
from wgengine/netlog to net/connstats.
This allows net/connstats to manage when it dumps messages,
either based on time or by size.

Updates tailscale/corp#8427

Signed-off-by: Joe Tsai <joetsai@digital-static.net>
1 year ago
Jordan Whited 55b24009f7
net/tstun: don't return early from a partial tun.Read() (#6745)
Fixes #6730

Signed-off-by: Jordan Whited <jordan@tailscale.com>
2 years ago
Jordan Whited ea5ee6f87c
all: update golang.zx2c4.com/wireguard to github.com/tailscale/wireguard-go (#6692)
This is temporary while we work to upstream performance work in
https://github.com/WireGuard/wireguard-go/pull/64. A replace directive
is less ideal as it breaks dependent code without duplication of the
directive.

Signed-off-by: Jordan Whited <jordan@tailscale.com>
2 years ago
Maisem Ali eb1adf629f net/tstun: reuse buffered packet from pool
We would call parsedPacketPool.Get() for all packets received in Read/Write.
This was wasteful and not necessary, fetch a single *packet.Parsed for
all packets.

Signed-off-by: Maisem Ali <maisem@tailscale.com>
2 years ago
Jordan Whited 76389d8baf
net/tstun, wgengine/magicsock: enable vectorized I/O on Linux (#6663)
This commit updates the wireguard-go dependency and implements the
necessary changes to the tun.Device and conn.Bind implementations to
support passing vectors of packets in tailscaled. This significantly
improves throughput performance on Linux.

Updates #414

Signed-off-by: Jordan Whited <jordan@tailscale.com>
Signed-off-by: James Tucker <james@tailscale.com>
Co-authored-by: James Tucker <james@tailscale.com>
2 years ago
Joe Tsai 2e5d08ec4f
net/connstats: invert network logging data flow (#6272)
Previously, tstun.Wrapper and magicsock.Conn managed their
own statistics data structure and relied on an external call to
Extract to extract (and reset) the statistics.
This makes it difficult to ensure a maximum size on the statistics
as the caller has no introspection into whether the number
of unique connections is getting too large.

Invert the control flow such that a *connstats.Statistics
is registered with tstun.Wrapper and magicsock.Conn.
Methods on non-nil *connstats.Statistics are called for every packet.
This allows the implementation of connstats.Statistics (in the future)
to better control when it needs to flush to ensure
bounds on maximum sizes.

The value registered into tstun.Wrapper and magicsock.Conn could
be an interface, but that has two performance detriments:

1. Method calls on interface values are more expensive since
they must go through a virtual method dispatch.

2. The implementation would need a sync.Mutex to protect the
statistics value instead of using an atomic.Pointer.

Given that methods on constats.Statistics are called for every packet,
we want reduce the CPU cost on this hot path.

Signed-off-by: Joe Tsai <joetsai@digital-static.net>
2 years ago
Andrew Dunham c2d7940ec0 cmd/tailscaled, net/tstun: add build tags to omit BIRD and TAP
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I7a39f4eeeb583b73ecffaf4c5f086a38e3a53e2e
2 years ago
Brad Fitzpatrick da8def8e13 all: remove old +build tags
The //go:build syntax was introduced in Go 1.17:

https://go.dev/doc/go1.17#build-lines

gofmt has kept the +build and go:build lines in sync since
then, but enough time has passed. Time to remove them.

Done with:

    perl -i -npe 's,^// \+build.*\n,,' $(git grep -l -F '+build')

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2 years ago
Brad Fitzpatrick f4ff26f577 types/pad32: delete package
Use Go 1.19's new 64-bit alignment ~hidden feature instead.

Fixes #5356

Change-Id: Ifcbcb115875a7da01df3bc29e9e7feadce5bc956
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2 years ago
Joe Tsai c21a3c4733
types/netlogtype: new package for network logging types (#6092)
The netlog.Message type is useful to depend on from other packages,
but doing so would transitively cause gvisor and other large packages
to be linked in.

Avoid this problem by moving all network logging types to a single package.

We also update staticcheck to take in:

	003d277bcf

Signed-off-by: Joe Tsai <joetsai@digital-static.net>
2 years ago
Joe Tsai 1b4e4cc1e8
wgengine/netlog: new package for traffic flow logging (#5864)
The Logger type managers a logtail.Logger for extracting
statistics from a tstun.Wrapper.
So long as Shutdown is called, it ensures that logtail
and statistic gathering resources are properly cleared up.

Signed-off-by: Joe Tsai <joetsai@digital-static.net>
2 years ago
Joe Tsai 84e8f25c21
net/tstun: rename statististics method (#5852)
Rename StatisticsEnable as SetStatisticsEnabled to be consistent
with other similarly named methods.

Rename StatisticsExtract as ExtractStatistics to follow
the convention where methods start with a verb.
It was originally named with Statistics as a prefix so that
statistics related methods would sort well in godoc,
but that property no longer holds.

Signed-off-by: Joe Tsai <joetsai@digital-static.net>
2 years ago
Joe Tsai 24ebf161e8
net/tstun: instrument Wrapper with statistics gathering (#5847)
If Wrapper.StatisticsEnable is enabled,
then per-connection counters are maintained.
If enabled, Wrapper.StatisticsExtract must be periodically called
otherwise there is unbounded memory growth.

Signed-off-by: Joe Tsai <joetsai@digital-static.net>
2 years ago
Josh Soref d4811f11a0 all: fix spelling mistakes
Signed-off-by: Josh Soref <2119212+jsoref@users.noreply.github.com>
2 years ago
Brad Fitzpatrick 74674b110d envknob: support changing envknobs post-init
Updates #5114

Change-Id: Ia423fc7486e1b3f3180a26308278be0086fae49b
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2 years ago
Maisem Ali a9f6cd41fd all: use syncs.AtomicValue
Signed-off-by: Maisem Ali <maisem@tailscale.com>
2 years ago
Maisem Ali 9bb5a038e5 all: use atomic.Pointer
Also add some missing docs.

Signed-off-by: Maisem Ali <maisem@tailscale.com>
2 years ago
Brad Fitzpatrick a12aad6b47 all: convert more code to use net/netip directly
perl -i -npe 's,netaddr.IPPrefixFrom,netip.PrefixFrom,' $(git grep -l -F netaddr.)
    perl -i -npe 's,netaddr.IPPortFrom,netip.AddrPortFrom,' $(git grep -l -F netaddr. )
    perl -i -npe 's,netaddr.IPPrefix,netip.Prefix,g' $(git grep -l -F netaddr. )
    perl -i -npe 's,netaddr.IPPort,netip.AddrPort,g' $(git grep -l -F netaddr. )
    perl -i -npe 's,netaddr.IP\b,netip.Addr,g' $(git grep -l -F netaddr. )
    perl -i -npe 's,netaddr.IPv6Raw\b,netip.AddrFrom16,g' $(git grep -l -F netaddr. )
    goimports -w .

Then delete some stuff from the net/netaddr shim package which is no
longer neeed.

Updates #5162

Change-Id: Ia7a86893fe21c7e3ee1ec823e8aba288d4566cd8
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2 years ago
Brad Fitzpatrick 6a396731eb all: use various net/netip parse funcs directly
Mechanical change with perl+goimports.

Changed {Must,}Parse{IP,IPPrefix,IPPort} to their netip variants, then
goimports -d .

Finally, removed the net/netaddr wrappers, to prevent future use.

Updates #5162

Change-Id: I59c0e38b5fbca5a935d701645789cddf3d7863ad
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2 years ago
Brad Fitzpatrick 7eaf5e509f net/netaddr: start migrating to net/netip via new netaddr adapter package
Updates #5162

Change-Id: Id7bdec303b25471f69d542f8ce43805328d56c12
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2 years ago
Maisem Ali 9514ed33d2 go.mod: bump gvisor.dev/gvisor
Pick up https://github.com/google/gvisor/pull/7787

Signed-off-by: Maisem Ali <maisem@tailscale.com>
2 years ago
Brad Fitzpatrick 0d52674a84 net/tstun: diagnose /dev/net/tun fd leak, give better failure message
Updates #5029

Change-Id: Ibee5e0c9076fe764eb5d856d5ef8b09f4d0e2921
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2 years ago
Brad Fitzpatrick 1336fb740b wgengine/netstack: make netstack MTU be 1280 also
Updates #3878

Change-Id: I1850085b32c8a40d85607b4ad433622c97d96a8d
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2 years ago
Mihai Parparita 86069874c9 net/tstun, wgengine: use correct type for counter metrics
We were marking them as gauges, but they are only ever incremented,
thus counter is more appropriate.

Signed-off-by: Mihai Parparita <mihai@tailscale.com>
2 years ago
James Tucker f9e86e64b7 *: use WireGuard where logged, printed or named
Signed-off-by: James Tucker <james@tailscale.com>
2 years ago
James Tucker ae483d3446 wgengine, net/packet, cmd/tailscale: add ICMP echo
Updates tailscale/corp#754

Signed-off-by: James Tucker <james@tailscale.com>
2 years ago
Tom DNetto 7f45734663 assorted: documentation and readability fixes
This were intended to be pushed to #4408, but in my excitement I
forgot to git push :/ better late than never.

Signed-off-by: Tom DNetto <tom@tailscale.com>
2 years ago
Tom DNetto 9e77660931 net/tstun,wgengine/{.,netstack}: handle UDP magicDNS traffic in netstack
This change wires netstack with a hook for traffic coming from the host
into the tun, allowing interception and handling of traffic to quad-100.

With this hook wired, magicDNS queries over UDP are now handled within
netstack. The existing logic in wgengine to handle magicDNS remains for now,
but its hook operates after the netstack hook so the netstack implementation
takes precedence. This is done in case we need to support platforms with
netstack longer than expected.

Signed-off-by: Tom DNetto <tom@tailscale.com>
2 years ago
Tom DNetto dc71d3559f net/tstun,wgengine: split PreFilterOut into multiple hooks
A subsequent commit implements handling of magicDNS traffic via netstack.
Implementing this requires a hook for traffic originating from the host and
hitting the tun, so we make another hook to support this.

Signed-off-by: Tom DNetto <tom@tailscale.com>
2 years ago
James Tucker 445c04c938
wgengine: inject packetbuffers rather than bytes (#4220)
Plumb the outbound injection path to allow passing netstack
PacketBuffers down to the tun Read, where they are decref'd to enable
buffer re-use. This removes one packet alloc & copy, and reduces GC
pressure by pooling outbound injected packets.

Fixes #2741
Signed-off-by: James Tucker <james@tailscale.com>
2 years ago