tailscale

Commit Graph

Author	SHA1	Message	Date
Mihai Parparita	7330aa593e	all: avoid repeated default interface lookups On some platforms (notably macOS and iOS) we look up the default interface to bind outgoing connections to. This is both duplicated work and results in logspam when the default interface is not available (i.e. when a phone has no connectivity, we log an error and thus cause more things that we will try to upload and fail). Fixed by passing around a netmon.Monitor to more places, so that we can use its cached interface state. Fixes #7850 Updates #7621 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	2 years ago
Mihai Parparita	4722f7e322	all: move network monitoring from wgengine/monitor to net/netmon We're using it in more and more places, and it's not really specific to our use of Wireguard (and does more just link/interface monitoring). Also removes the separate interface we had for it in sockstats -- it's a small enough package (we already pull in all of its dependencies via other paths) that it's not worth the extra complexity. Updates #7621 Updates #7850 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	2 years ago
Andrew Dunham	280255acae	various: add golangci-lint, fix issues (#7905 ) This adds an initial and intentionally minimal configuration for golang-ci, fixes the issues reported, and adds a GitHub Action to check new pull requests against this linter configuration. Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I8f38fbc315836a19a094d0d3e986758b9313f163	2 years ago
Maisem Ali	985535aebc	net/tstun,wgengine/*: add support for NAT to routes This adds support to make exit nodes and subnet routers work when in scenarios where NAT is required. It also updates the NATConfig to be generated from a `wgcfg.Config` as that handles merging prefs with the netmap, so it has the required information about whether an exit node is already configured and whether routes are accepted. Updates tailscale/corp#8020 Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Maisem Ali	bb31fd7d1c	net/tstun: add inital support for NAT v4 This adds support in tstun to utitilize the SelfNodeV4MasqAddrForThisPeer and perform the necessary modifications to the packet as it passes through tstun. Currently this only handles ICMP, UDP and TCP traffic. Subnet routers and Exit Nodes are also unsupported. Updates tailscale/corp#8020 Co-authored-by: Melanie Warrick <warrick@tailscale.com> Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Maisem Ali	535fad16f8	net/tstun: rename filterIn/filterOut methods to be more descriptive Updates tailscale/corp#8020 Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Mihai Parparita	9cb332f0e2	sockstats: instrument networking code paths Uses the hooks added by tailscale/go#45 to instrument the reads and writes on the major code paths that do network I/O in the client. The convention is to use "<package>.<type>:<label>" as the annotation for the responsible code path. Enabled on iOS, macOS and Android only, since mobile platforms are the ones we're most interested in, and we are less sensitive to any throughput degradation due to the per-I/O callback overhead (macOS is also enabled for ease of testing during development). For now just exposed as counters on a /v0/sockstats PeerAPI endpoint. We also keep track of the current interface so that we can break out the stats by interface. Updates tailscale/corp#9230 Updates #3363 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	2 years ago
Tom DNetto	2ca6dd1f1d	wgengine: start logging DISCO frames to pcap stream Signed-off-by: Tom DNetto <tom@tailscale.com>	2 years ago
Tom DNetto	99b9d7a621	all: implement pcap streaming for datapath debugging Updates: tailscale/corp#8470 Signed-off-by: Tom DNetto <tom@tailscale.com>	2 years ago
Will Norris	71029cea2d	all: update copyright and license headers This updates all source files to use a new standard header for copyright and license declaration. Notably, copyright no longer includes a date, and we now use the standard SPDX-License-Identifier header. This commit was done almost entirely mechanically with perl, and then some minimal manual fixes. Updates #6865 Signed-off-by: Will Norris <will@tailscale.com>	2 years ago
Tom DNetto	673b3d8dbd	net/dns,userspace: remove unused DNS paths, normalize query limit on iOS With `a42a594bb3`, iOS uses netstack and hence there are no longer any platforms which use the legacy MagicDNS path. As such, we remove it. We also normalize the limit for max in-flight DNS queries on iOS (it was 64, now its 256 as per other platforms). It was 64 for the sake of being cautious about memory, but now we have 50Mb (iOS-15 and greater) instead of 15Mb so we have the spare headroom. Signed-off-by: Tom DNetto <tom@tailscale.com>	2 years ago
Brad Fitzpatrick	0f604923d3	ipn/ipnlocal: fix StatusWithoutPeers not populating parts of Status Fixes #4311 Change-Id: Iaae0615148fa7154f4ef8f66b455e3a6c2fa9df3 Co-authored-by: Claire Wang <claire@tailscale.com> Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Jordan Whited	ea5ee6f87c	all: update golang.zx2c4.com/wireguard to github.com/tailscale/wireguard-go (#6692 ) This is temporary while we work to upstream performance work in https://github.com/WireGuard/wireguard-go/pull/64. A replace directive is less ideal as it breaks dependent code without duplication of the directive. Signed-off-by: Jordan Whited <jordan@tailscale.com>	2 years ago
Joe Tsai	7d6775b082	wgengine: respect --no-logs-no-support flag for network logging (#6172 ) In the future this will cause a node to be unable to join the tailnet if network logging is enabled. Signed-off-by: Joe Tsai <joetsai@digital-static.net>	2 years ago
Joe Tsai	cfef47ddcc	wgengine: perform router reconfig for netlog-only changes (#6118 ) If the network logging configruation changes (and nothing else) we will tear down the network logger and start it back up. However, doing so will lose the router configuration state. Manually reconfigure it with the routing state. Signed-off-by: Joe Tsai <joetsai@digital-static.net>	2 years ago
Joe Tsai	a3602c28bd	wgengine/netlog: embed the StableNodeID of the authoring node (#6105 ) This allows network messages to be annotated with which node it came from. Signed-off-by: Joe Tsai <joetsai@digital-static.net>	2 years ago
Joe Tsai	81fd259133	wgengine/magicsock: gather physical-layer statistics (#5925 ) There is utility in logging traffic statistics that occurs at the physical layer. That is, in order to send packets virtually to a particular tailscale IP address, what physical endpoints did we need to communicate with? This functionality logs IP addresses identical to what had always been logged in magicsock prior to #5823, so there is no increase in PII being logged. ExtractStatistics returns a mapping of connections to counts. The source is always a Tailscale IP address (without port), while the destination is some endpoint reachable on WAN or LAN. As a special case, traffic routed through DERP will use 127.3.3.40 as the destination address with the port being the DERP region. This entire feature is only enabled if data-plane audit logging is enabled on the tailnet (by default it is disabled). Example of type of information logged: ------------------------------------ Tx[P/s] Tx[B/s] Rx[P/s] Rx[B/s] PhysicalTraffic: 25.80 3.39Ki 38.80 5.57Ki 100.1.2.3 -> 143.11.22.33:41641 15.40 2.00Ki 23.20 3.37Ki 100.4.5.6 -> 192.168.0.100:41641 10.20 1.38Ki 15.60 2.20Ki 100.7.8.9 -> 127.3.3.40:2 0.20 6.40 0.00 0.00 Signed-off-by: Joe Tsai <joetsai@digital-static.net>	2 years ago
Maisem Ali	3555a49518	net/dns: always attempt to read the OS config on macOS/iOS Also reconfigure DNS on iOS/macOS on link changes. Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Joe Tsai	a1a43ed266	wgengine/netlog: add support for magicsock statistics (#5913 ) This sets up Logger to handle statistics at the magicsock layer, where we can correlate traffic between a particular tailscale IP address and any number of physical endpoints used to contact the node that hosts that tailscale address. We also export Message and TupleCounts to better document the JSON format that is being sent to the logging infrastructure. This commit does NOT yet enable the actual logging of magicsock statistics. That will be a future commit. Signed-off-by: Joe Tsai <joetsai@digital-static.net>	2 years ago
Joe Tsai	f9120eee57	wgengine: start network logger in Userspace.Reconfig (#5908 ) If the wgcfg.Config is specified with network logging arguments, then Userspace.Reconfig starts up an asynchronous network logger, which is shutdown either upon Userspace.Close or when Userspace.Reconfig is called again without network logging or route arguments. Signed-off-by: Joe Tsai <joetsai@digital-static.net>	2 years ago
Andrew Dunham	e5636997c5	wgengine: don't re-allocate trimmedNodes map (#5825 ) Change-Id: I512945b662ba952c47309d3bf8a1b243e05a4736 Signed-off-by: Andrew Dunham <andrew@tailscale.com>	2 years ago
Mihai Parparita	8343b243e7	all: consistently initialize Logf when creating tsdial.Dialers Most visible when using tsnet.Server, but could have resulted in dropped messages in a few other places too. Fixes #5743 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	2 years ago
Josh Soref	d4811f11a0	all: fix spelling mistakes Signed-off-by: Josh Soref <2119212+jsoref@users.noreply.github.com>	2 years ago
Andrew Dunham	420d841292	wgengine: log subnet router decision at v1 if we have a BIRD client (#5786 ) Updates tailscale/coral#82 Change-Id: I398d75f7e178ff7c531ca09899c82cf974fc30c9 Signed-off-by: Andrew Dunham <andrew@tailscale.com>	2 years ago
Brad Fitzpatrick	74674b110d	envknob: support changing envknobs post-init Updates #5114 Change-Id: Ia423fc7486e1b3f3180a26308278be0086fae49b Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	33ee2c058e	wgengine: update comments, remove redundant code in forceFullWireguardConfig Change-Id: I464a0bce36e3a362c7d7ace0e8d2dd77fa825ee2 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
James Tucker	265b008e49	wgengine: fix race on endpoints in getStatus Signed-off-by: James Tucker <james@tailscale.com>	2 years ago
James Tucker	90dc0e1702	wgengine: remove unused singleflight group Signed-off-by: James Tucker <james@tailscale.com>	2 years ago
James Tucker	81dba3738e	wgengine: remove all peer status from open timeout diagnostics Avoid contention from fetching status for all peers, and instead fetch status for a single peer. Updates tailscale/coral#72 Signed-off-by: James Tucker <james@tailscale.com>	2 years ago
James Tucker	ad1cc6cff9	wgengine: use Go API rather than UAPI for status Signed-off-by: James Tucker <james@tailscale.com>	2 years ago
Andrew Dunham	e8f09d24c7	wgengine: use a singleflight.Group to reduce status contention (#5450 ) Updates tailscale/coral#72 Signed-off-by: Andrew Dunham <andrew@tailscale.com> Signed-off-by: Andrew Dunham <andrew@tailscale.com>	2 years ago
Joe Tsai	32a1a3d1c0	util/deephash: avoid variadic argument for Update (#5372 ) Hashing []any is slow since hashing of interfaces is slow. Hashing of interfaces is slow since we pessimistically assume that cycles can occur through them and start cycle tracking. Drop the variadic signature of Update and fix callers to pass in an anonymous struct so that we are hashing concrete types near the root of the value tree. Signed-off-by: Joe Tsai <joetsai@digital-static.net> Signed-off-by: Joe Tsai <joetsai@digital-static.net>	2 years ago
Maisem Ali	a9f6cd41fd	all: use syncs.AtomicValue Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Brad Fitzpatrick	116f55ff66	all: gofmt for Go 1.19 Updates #5210 Change-Id: Ib02cd5e43d0a8db60c1f09755a8ac7b140b670be Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	a12aad6b47	all: convert more code to use net/netip directly perl -i -npe 's,netaddr.IPPrefixFrom,netip.PrefixFrom,' $(git grep -l -F netaddr.) perl -i -npe 's,netaddr.IPPortFrom,netip.AddrPortFrom,' $(git grep -l -F netaddr. ) perl -i -npe 's,netaddr.IPPrefix,netip.Prefix,g' $(git grep -l -F netaddr. ) perl -i -npe 's,netaddr.IPPort,netip.AddrPort,g' $(git grep -l -F netaddr. ) perl -i -npe 's,netaddr.IP\b,netip.Addr,g' $(git grep -l -F netaddr. ) perl -i -npe 's,netaddr.IPv6Raw\b,netip.AddrFrom16,g' $(git grep -l -F netaddr. ) goimports -w . Then delete some stuff from the net/netaddr shim package which is no longer neeed. Updates #5162 Change-Id: Ia7a86893fe21c7e3ee1ec823e8aba288d4566cd8 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	6a396731eb	all: use various net/netip parse funcs directly Mechanical change with perl+goimports. Changed {Must,}Parse{IP,IPPrefix,IPPort} to their netip variants, then goimports -d . Finally, removed the net/netaddr wrappers, to prevent future use. Updates #5162 Change-Id: I59c0e38b5fbca5a935d701645789cddf3d7863ad Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	7eaf5e509f	net/netaddr: start migrating to net/netip via new netaddr adapter package Updates #5162 Change-Id: Id7bdec303b25471f69d542f8ce43805328d56c12 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Mihai Parparita	86069874c9	net/tstun, wgengine: use correct type for counter metrics We were marking them as gauges, but they are only ever incremented, thus counter is more appropriate. Signed-off-by: Mihai Parparita <mihai@tailscale.com>	3 years ago
Maisem Ali	fd99c54e10	tailcfg,all: change structs to []*dnstype.Resolver Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
James Tucker	f9e86e64b7	*: use WireGuard where logged, printed or named Signed-off-by: James Tucker <james@tailscale.com>	3 years ago
James Tucker	ae483d3446	wgengine, net/packet, cmd/tailscale: add ICMP echo Updates tailscale/corp#754 Signed-off-by: James Tucker <james@tailscale.com>	3 years ago
Tom DNetto	2a0b5c21d2	net/dns/{., resolver}, wgengine: fix goroutine leak on shutdown Signed-off-by: Tom DNetto <tom@tailscale.com>	3 years ago
Tom DNetto	9e77660931	net/tstun,wgengine/{.,netstack}: handle UDP magicDNS traffic in netstack This change wires netstack with a hook for traffic coming from the host into the tun, allowing interception and handling of traffic to quad-100. With this hook wired, magicDNS queries over UDP are now handled within netstack. The existing logic in wgengine to handle magicDNS remains for now, but its hook operates after the netstack hook so the netstack implementation takes precedence. This is done in case we need to support platforms with netstack longer than expected. Signed-off-by: Tom DNetto <tom@tailscale.com>	3 years ago
Tom DNetto	dc71d3559f	net/tstun,wgengine: split PreFilterOut into multiple hooks A subsequent commit implements handling of magicDNS traffic via netstack. Implementing this requires a hook for traffic originating from the host and hitting the tun, so we make another hook to support this. Signed-off-by: Tom DNetto <tom@tailscale.com>	3 years ago
Tom DNetto	9dee6adfab	cmd/tailscaled,ipn/ipnlocal,wgengine/...: pass dns.Manager into netstack Needed for a following commit which moves magicDNS handling into netstack. Signed-off-by: Tom DNetto <tom@tailscale.com>	3 years ago
Maisem Ali	2265587d38	wgengine/{,magicsock}: add metrics for rebinds and restuns Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Tom	24bdcbe5c7	net/dns, net/dns/resolver, wgengine: refactor DNS request path (#4364 ) * net/dns, net/dns/resolver, wgengine: refactor DNS request path Previously, method calls into the DNS manager/resolver types handled DNS requests rather than DNS packets. This is fine for UDP as one packet corresponds to one request or response, however will not suit an implementation that supports DNS over TCP. To support PRs implementing this in the future, wgengine delegates all handling/construction of packets to the magic DNS endpoint, to the DNS types themselves. Handling IP packets at this level enables future support for both UDP and TCP. Signed-off-by: Tom DNetto <tom@tailscale.com>	3 years ago
Maisem Ali	6fecc16c3b	ipn/ipnlocal: do not process old status messages received out of order When `setWgengineStatus` is invoked concurrently from multiple goroutines, it is possible that the call invoked with a newer status is processed before a call with an older status. e.g. a status that has endpoints might be followed by a status without endpoints. This causes unnecessary work in the engine and can result in packet loss. This patch adds an `AsOf time.Time` field to the status to specifiy when the status was calculated, which later allows `setWgengineStatus` to ignore any status messages it receives that are older than the one it has already processed. Updates tailscale/corp#2579 Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Maisem Ali	07f48a7bfe	wgengine: handle nil netmaps when assigning isSubnetRouter. Fixes tailscale/coral#51 Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Brad Fitzpatrick	41fd4eab5c	envknob: add new package for all the strconv.ParseBool(os.Getenv(..)) A new package can also later record/report which knobs are checked and set. It also makes the code cleaner & easier to grep for env knobs. Change-Id: Id8a123ab7539f1fadbd27e0cbeac79c2e4f09751 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	506c727e30	ipnlocal, net/{dns,tsaddr,tstun}, wgengine: support MagicDNS on IPv6 Fixes #3660 RELNOTE=MagicDNS now works over IPv6 when CGNAT IPv4 is disabled. Change-Id: I001e983df5feeb65289abe5012dedd177b841b45 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Denton Gentry	878a20df29	net/dns: add GetBaseConfig to CallbackRouter. Allow users of CallbackRouter to supply a GetBaseConfig implementation. This is expected to be used on Android, which currently lacks both a) platform support for Split-DNS and b) a way to retrieve the current DNS servers. iOS/macOS also use the CallbackRouter but have platform support for SplitDNS, so don't need getBaseConfig. Updates https://github.com/tailscale/tailscale/issues/2116 Updates https://github.com/tailscale/tailscale/issues/988 Signed-off-by: Denton Gentry <dgentry@tailscale.com>	3 years ago
Brad Fitzpatrick	ad3d6e31f0	net/tsdial: move macOS/iOS peerapi sockopt logic from LocalBackend Change-Id: I812cae027c40c70cdc701427b1a1850cd9bcd60c Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	c7fb26acdb	net/tsdial: also plumb TUN name and monitor into tsdial.Dialer In prep for moving stuff out of LocalBackend. Change-Id: I9725aa9c3ebc7275f8c40e040b326483c0340127 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	c37af58ea4	net/tsdial: move more weirdo dialing into new tsdial package, plumb Not done yet, but this move more of the outbound dial special casing from random packages into tsdial, which aspires to be the one unified place for all outbound dialing shenanigans. Then this plumbs it all around, so everybody is ultimately holding on to the same dialer. As of this commit, macOS/iOS using an exit node should be able to reach to the exit node's DoH DNS proxy over peerapi, doing the sockopt to stay within the Network Extension. A number of steps remain, including but limited to: * move a bunch more random dialing stuff * make netstack-mode tailscaled be able to use exit node's DNS proxy, teaching tsdial's resolver to use it when an exit node is in use. Updates #1713 Change-Id: I1e8ee378f125421c2b816f47bc2c6d913ddcd2f5 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	bb91cfeae7	net/socks5/tssocks, wgengine: permit SOCKS through subnet routers/exit nodes Fixes #1970 Change-Id: Ibef45e8796e1d9625716d72539c96d1dbf7b1f76 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	283ae702c1	ipn/ipnlocal: start adding DoH DNS server to peerapi when exit node Updates #1713 Change-Id: I8d9c488f779e7acc811a9bc18166a2726198a429 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	0350cf0438	wgengine{,/router}: annotate some more errors Updates #3351 Change-Id: I8b4f957d2051b3e29401bb449dbadbdada3a7c46 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	cf06f9df37	net/tstun, wgengine: add packet-level and drop metrics Primarily tstun work, but some MagicDNS stuff spread into wgengine. No wireguard reconfig metrics (yet). Updates #3307 Change-Id: Ide768848d7b7d0591e558f118b553013d1ec94ad Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
David Anderson	41da7620af	go.mod: update wireguard-go to pick up roaming toggle wgengine/wgcfg: introduce wgcfg.NewDevice helper to disable roaming at all call sites (one real plus several tests). Fixes tailscale/corp#3016. Signed-off-by: David Anderson <danderson@tailscale.com> Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
David Anderson	0532eb30db	all: replace tailcfg.DiscoKey with key.DiscoPublic. Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	7e6a1ef4f1	tailcfg: use key.NodePublic in wire protocol types. Updates #3206. Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	c17250cee2	ipn/ipnstate: use key.NodePublic instead of tailcfg.NodeKey. Updates #3206 Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	c3d7115e63	wgengine: use key.NodePublic instead of tailcfg.NodeKey. Updates #3206 Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	72ace0acba	wgengine/magicsock: use key.NodePublic instead of tailcfg.NodeKey. Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	418adae379	various: use NodePublic.AsNodeKey() instead of tailcfg.NodeKeyFromNodePublic() Updates #3206 Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	ccd36cb5b1	wgengine: remove use of legacy key parsing helper. Updates #3206 Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	ef241f782e	wgengine/magicsock: remove uses of tailcfg.DiscoKey. Updates #3206 Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	55b6753c11	wgengine/magicsock: remove use of key.{Public,Private}. Updates #3206 Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	c1d009b9e9	ipn/ipnstate: use key.NodePublic instead of the generic key.Public. Updates #3206. Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	c9bf773312	wgengine/magicsock: replace use of wgkey with new node key type. Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	a9c78910bd	wgengine/wgcfg: convert to use new node key type. Updates #3206 Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
Maisem Ali	85fa1b0d61	wgengine: fail NewUserspaceEngine if wireguard device doesn't come up Just something I ran across while debugging an unrelated failure. This is not in response to any bug/issue. Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Avery Pennarun	0d4a0bf60e	magicsock: if STUN failed to send before, rebind before STUNning again. On iOS (and possibly other platforms), sometimes our UDP socket would get stuck in a state where it was bound to an invalid interface (or no interface) after a network reconfiguration. We can detect this by actually checking the error codes from sending our STUN packets. If we completely fail to send any STUN packets, we know something is very broken. So on the next STUN attempt, let's rebind the UDP socket to try to correct any problems. This fixes a problem where iOS would sometimes get stuck using DERP instead of direct connections until the backend was restarted. Fixes #2994 Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	3 years ago
Denton Gentry	93c2882a2f	wgengine: flush DNS cache after major link change. Windows has a public dns.Flush used in router_windows.go. However that won't work for platforms like Linux, where we need a different flush mechanism for resolved versus other implementations. We're instead adding a FlushCaches method to the dns Manager, which can be made to work on all platforms as needed. Fixes https://github.com/tailscale/tailscale/issues/2132 Signed-off-by: Denton Gentry <dgentry@tailscale.com>	3 years ago
Brad Fitzpatrick	dabeda21e0	net/tstun: block looped disco traffic Updates #1526 (maybe fixes? time will tell) Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
David Crawshaw	9502b515f1	net/dns: replace resolver IPs with type for DoH We currently plumb full URLs for DNS resolvers from the control server down to the client. But when we pass the values into the net/dns package, we throw away any URL that isn't a bare IP. This commit continues the plumbing, and gets the URL all the way to the built in forwarder. (It stops before plumbing URLs into the OS configurations that can handle them.) For #2596 Signed-off-by: David Crawshaw <crawshaw@tailscale.com>	3 years ago
Brad Fitzpatrick	7bfd4f521d	cmd/tailscale: fix "tailscale ip $self-host-hostname" And in the process, fix the related confusing error messages from pinging your own IP or hostname. Fixes #2803 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
David Anderson	f90ac11bd8	wgengine: remove unnecessary magicConnStarted channel. Having removed magicconn.Start, there's no need to synchronize startup of other things to it any more. Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	bb10443edf	wgengine/wgcfg: use just the hexlified node key as the WireGuard endpoint. The node key is all magicsock needs to find the endpoint that WireGuard needs. Updates #2752 Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	dfd978f0f2	wgengine/magicsock: use NodeKey, not DiscoKey, as the trigger for lazy reconfig. Updates #2752 Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	4c27e2fa22	wgengine/magicsock: remove Start method from Conn. Over time, other magicsock refactors have made Start effectively a no-op, except that some other functions choose to panic if called before Start. Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
Maisem Ali	fd4838dc57	wgengine/userspace: add support to automatically enable/disable the tailscale protocol in BIRD, when the node is a primary subnet router as determined by control. Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Brad Fitzpatrick	7fcf86a14a	wgengine: fix link monitor / magicsock Start race Fixes #2733 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Josh Bleecher Snyder	6ef734e493	wgengine: predict min.Peers length across calls The number of peers we have will be pretty stable across time. Allocate roughly the right slice size. This reduces memory usage when there are many peers. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Josh Bleecher Snyder	adf696172d	wgengine/userspace: reduce allocations in getStatus Two optimizations. Use values instead of pointers. We were using pointers to make track the "peer in progress" easier. It's not too hard to do it manually, though. Make two passes through the data, so that we can size our return value accurately from the beginning. This is cheap enough compared to the allocation, which grows linearly in the number of peers, that it is worth doing. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Brad Fitzpatrick	a729070252	net/tstun: add start of Linux TAP support, with DHCP+ARP server Still very much a prototype (hard-coded IPs, etc) but should be non-invasive enough to submit at this point and iterate from here. Updates #2589 Co-Author: David Crawshaw <crawshaw@tailscale.com> Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Josh Bleecher Snyder	f6e833748b	wgengine: use mono.Time Migrate wgengine to mono.Time for performance-sensitive call sites. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Brad Fitzpatrick	5c266bdb73	wgengine: re-set DNS config on Linux after a major link change Updates #2458 (maybe fixes it) Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Joe Tsai	9a0c8bdd20	util/deephash: make hash type opaque The fact that Hash returns a [sha256.Size]byte leaks details about the underlying hash implementation. This could very well be any other hashing algorithm with a possible different block size. Abstract this implementation detail away by declaring an opaque type that is comparable. While we are changing the signature of UpdateHash, rename it to just Update to reduce stutter (e.g., deephash.Update). Signed-off-by: Joe Tsai <joetsai@digital-static.net>	3 years ago
Brad Fitzpatrick	700badd8f8	util/deephash: move internal/deephash to util/deephash No code changes. Just a minor package doc addition about lack of API stability.	3 years ago
Brad Fitzpatrick	c45bfd4180	wgengine: make dnsIPsOverTailscale also consider DefaultResolvers Found during a failed experiment debugging something on Android. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	45e64f2e1a	net/dns{,/resolver}: refactor DNS forwarder, send out of right link on macOS/iOS Fixes #2224 Fixes tailscale/corp#2045 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
David Crawshaw	4ce15505cb	wgengine: randomize client port if netmap says to For testing out #2187 Signed-off-by: David Crawshaw <crawshaw@tailscale.com>	3 years ago
Josh Bleecher Snyder	1ece91cede	go.mod: upgrade wireguard-windows, de-fork wireguard-go Pull in the latest version of wireguard-windows. Switch to upstream wireguard-go. This requires reverting all of our import paths. Unfortunately, this has to happen at the same time. The wireguard-go change is very low risk, as that commit matches our fork almost exactly. (The only changes are import paths, CI files, and a go.mod entry.) So if there are issues as a result of this commit, the first place to look is wireguard-windows changes. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Josh Bleecher Snyder	73adbb7a78	wgengine: pass an addressable value to deephash.UpdateHash This makes deephash more efficient. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Josh Bleecher Snyder	25df067dd0	all: adapt to opaque netaddr types This commit is a mishmash of automated edits using gofmt: gofmt -r 'netaddr.IPPort{IP: a, Port: b} -> netaddr.IPPortFrom(a, b)' -w . gofmt -r 'netaddr.IPPrefix{IP: a, Port: b} -> netaddr.IPPrefixFrom(a, b)' -w . gofmt -r 'a.IP.Is4 -> a.IP().Is4' -w . gofmt -r 'a.IP.As16 -> a.IP().As16' -w . gofmt -r 'a.IP.Is6 -> a.IP().Is6' -w . gofmt -r 'a.IP.As4 -> a.IP().As4' -w . gofmt -r 'a.IP.String -> a.IP().String' -w . And regexps: \w(.)\.Port = (.) -> $1 = $1.WithPort($2) \w(.)\.IP = (.) -> $1 = $1.WithIP($2) And lots of manual fixups. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Josh Bleecher Snyder	ebcd7ab890	wgengine: remove wireguard-go DeviceOptions We no longer need them. This also removes the 32 bytes of prefix junk before endpoints. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Josh Bleecher Snyder	aacb2107ae	all: add extra information to serialized endpoints magicsock.Conn.ParseEndpoint requires a peer's public key, disco key, and legacy ip/ports in order to do its job. We currently accomplish that by: * adding the public key in our wireguard-go fork * encoding the disco key as magic hostname * using a bespoke comma-separated encoding It's a bit messy. Instead, switch to something simpler: use a json-encoded struct containing exactly the information we need, in the form we use it. Our wireguard-go fork still adds the public key to the address when it passes it to ParseEndpoint, but now the code compensating for that is just a couple of simple, well-commented lines. Once this commit is in, we can remove that part of the fork and remove the compensating code. Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	4 years ago
Brad Fitzpatrick	36a26e6a71	internal/deephash: rename from deepprint Yes, it printed, but that was an implementation detail for hashing. And coming optimization will make it print even less. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago

1 2 3 4 5 ...

355 Commits (6e55d8f6a1cb93b521acf386b2a4f9ca769af05d)