tailscale

Commit Graph

Author	SHA1	Message	Date
Charlotte Brandhorst-Satzkorn	339397ab74	wgengine/magicsock: remove noV4/noV6 check in addrForSendWireGuardLocked This change removes the noV4/noV6 check from addrForSendWireGuardLocked. On Android, the client panics when reaching `rand.Intn()`, likely due to the candidates list being containing no candidates. The suspicion is that the `noV4` and the `noV6` are both being triggered causing the loop to continue. Updates tailscale/corp#12938 Updates #7826 Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>	1 year ago
Brad Fitzpatrick	8b80d63b42	wgengine/magicsock: clarify a log message is a warning, not an error Updates #cleanup Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Andrew Dunham	2a9d46c38f	wgengine/magicsock: prefer private endpoints to public ones Switch our best address selection to use a scoring-based approach, where we boost each address based on whether it's a private IP or IPv6. For users in cloud environments, this biases endpoint selection towards using an endpoint that is less likely to cost the user money, and should be less surprising to users. This also involves updating the tests to not use private IPv4 addresses; other than that change, the behaviour should be identical for existing endpoints. Updates #8097 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I069e3b399daea28be66b81f7e44fc27b2943d8af	1 year ago
Brad Fitzpatrick	4d7927047c	wgengine/magicsock: annotate, skip flaky TestIsWireGuardOnlyPickEndpointByPing Updates #8037 Updates #7826 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Charlotte Brandhorst-Satzkorn	ddb4040aa0	wgengine/magicsock: add address selection for wireguard only endpoints (#7979 ) This change introduces address selection for wireguard only endpoints. If a endpoint has not been used before, an address is randomly selected to be used based on information we know about, such as if they are able to use IPv4 or IPv6. When an address is initially selected, we also initiate a new ICMP ping to the endpoints addresses to determine which endpoint offers the best latency. This information is then used to update which endpoint we should be using based on the best possible route. If the latency is the same for a IPv4 and an IPv6 address, IPv6 will be used. Updates #7826 Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>	2 years ago
Andrew Dunham	bcf7b63d7e	wgengine/magicsock: add hysteresis to endpoint selection Avoid selecting an endpoint as "better" than the current endpoint if the total latency improvement is less than 1%. This adds some hysteresis to avoid flapping between endpoints for a minimal improvement in latency. Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: If8312e1768ea65c4b4d4e13d8de284b3825d7a73	2 years ago
Mihai Parparita	7330aa593e	all: avoid repeated default interface lookups On some platforms (notably macOS and iOS) we look up the default interface to bind outgoing connections to. This is both duplicated work and results in logspam when the default interface is not available (i.e. when a phone has no connectivity, we log an error and thus cause more things that we will try to upload and fail). Fixed by passing around a netmon.Monitor to more places, so that we can use its cached interface state. Fixes #7850 Updates #7621 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	2 years ago
Mihai Parparita	4722f7e322	all: move network monitoring from wgengine/monitor to net/netmon We're using it in more and more places, and it's not really specific to our use of Wireguard (and does more just link/interface monitoring). Also removes the separate interface we had for it in sockstats -- it's a small enough package (we already pull in all of its dependencies via other paths) that it's not worth the extra complexity. Updates #7621 Updates #7850 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	2 years ago
Andrew Dunham	f85dc6f97c	ci: add more lints (#7909 ) This is a follow-up to #7905 that adds two more linters and fixes the corresponding findings. As per the previous PR, this only flags things that are "obviously" wrong, and fixes the issues found. Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I8739bdb7bc4f75666a7385a7a26d56ec13741b7c	2 years ago
Andrew Dunham	80b138f0df	wgengine/magicsock: keep advertising endpoints after we stop discovering them Previously, when updating endpoints we would immediately stop advertising any endpoint that wasn't discovered during determineEndpoints. This could result in, for example, a case where we performed an incremental netcheck, didn't get any of our three STUN packets back, and then dropped our STUN endpoint from the set of advertised endpoints... which would result in clients falling back to a DERP connection until the next call to determineEndpoints. Instead, let's cache endpoints that we've discovered and continue reporting them to clients until a timeout expires. In the above case where we temporarily don't have a discovered STUN endpoint, we would continue reporting the old value, then re-discover the STUN endpoint again and continue reporting it as normal, so clients never see a withdrawal. Updates tailscale/coral#108 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I42de72e7418ab328a6c732bdefc74549708cf8b9	2 years ago
Brad Fitzpatrick	4b49ca4a12	wgengine/magicsock: update comments on what implements conn.Bind The comment still said *magicsock.Conn implemented wireguard-go conn.Bind. That wasn't accurate anymore. A doc #cleanup. Change-Id: I7fd003b939497889cc81147bfb937b93e4f6865c Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	10f1c90f4d	wgengine/magicsock, types/nettype, etc: finish ReadFromUDPAddrPort netip migration So we're staying within the netip.Addr/AddrPort consistently and avoiding allocs/conversions to the legacy net addr types. Updates #5162 Change-Id: I59feba60d3de39f773e68292d759766bac98c917 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	29f7df9d8f	wgengine/magicsock, etc: remove mostly unused WriteTo methods Updates #2331 Updates #5162 Change-Id: I8291884425481eeaedde38a54adfd8ed7292a497 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
James Tucker	20f17d6e7b	wgengine/magicsock: reenable magicsock tests on Windows These tests are passing locally and on CI. They had failed earlier in the day when first fixing up CI, and it is not immediately clear why. I have cycled IPv6 support locally, but this should not have a substantial effect. Updates #7876 Signed-off-by: James Tucker <jftucker@gmail.com>	2 years ago
James Tucker	8dec1a8724	.github/workflows: reenable Windows CI, disable broken tests We accidentally switched to ./tool/go in `4022796484` which resulted in no longer running Windows builds, as this is attempting to run a bash script. I was unable to quickly fix the various tests that have regressed, so instead I've added skips referencing #7876, which we need to back and fix. Updates #7262 Updates #7876 Signed-off-by: James Tucker <james@tailscale.com>	2 years ago
Brad Fitzpatrick	6866aaeab3	wgengine/magicsock: factor out receiveIPv4 & receiveIPv6 common code Updates #2331 Change-Id: I801df38b217f5d17203e8dc3b8654f44747e0f4b Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Andrew Dunham	228d0c6aea	net/netcheck: use dnscache.Resolver when resolving DERP IPs This also adds a bunch of tests for this function to ensure that we're returning the proper IP(s) in all cases. Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I0d9d57170dbab5f2bf07abdf78ecd17e0e635399	2 years ago
Maisem Ali	64bbf1738e	tailcfg: make SelfNodeV4MasqAddrForThisPeer a pointer This makes `omitempty` actually work, and saves bytes in each map response. Updates tailscale/corp#8020 Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Mihai Parparita	edb02b63f8	net/sockstats: pass in logger to sockstats.WithSockStats Using log.Printf may end up being printed out to the console, which is not desirable. I noticed this when I was investigating some client logs with `sockstats: trace "NetcheckClient" was overwritten by another`. That turns to be harmless/expected (the netcheck client will fall back to the DERP client in some cases, which does its own sockstats trace). However, the log output could be visible to users if running the `tailscale netcheck` CLI command, which would be needlessly confusing. Updates tailscale/corp#9230 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	2 years ago
James Tucker	e09c434e5d	wgengine/magicsock: remove locking sync requirements on conn disco keys The lazy initialization of the disco key is not necessary, and contributes to unnecessary locking and state checking. Updates #cleanup Signed-off-by: James Tucker <james@tailscale.com>	2 years ago
James Tucker	e1b71c83ac	wgengine/magicsock: remove unused fields on discoInfo Updates #cleanup Signed-off-by: James Tucker <james@tailscale.com>	2 years ago
James Tucker	a257b2f88b	wgengine/magicsock: add immutability documentation to endpointDisco Updates #7825 Signed-off-by: James Tucker <james@tailscale.com>	2 years ago
Charlotte Brandhorst-Satzkorn	c573bef0aa	tailcfg,wgengine: add initial support for WireGuard only peers A peer can have IsWireGuardOnly, which means it will not support DERP or Disco, and it must have Endpoints filled in order to be usable. In the present implementation only the first Endpoint will be used as the bestAddr. Updates tailscale/corp#10351 Co-authored-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com> Co-authored-by: James Tucker <james@tailscale.com> Signed-off-by: James Tucker <james@tailscale.com>	2 years ago
James Tucker	6cfcb3cae4	wgengine/magicsock: fix synchronization of endpoint disco fields Identified in review in #7821 endpoint.discoKey and endpoint.discoShort are often accessed without first taking endpoint.mu. The arrangement with endpoint.mu is inconvenient for a good number of those call-sites, so it is instead replaced with an atomic pointer to carry both pieces of disco info. This will also help with #7821 that wants to add explicit checks/guards to disable disco behaviors when disco keys are missing which is necessarily implicitly mostly covered by this change. Updates #7821 Signed-off-by: James Tucker <james@tailscale.com>	2 years ago
Tom DNetto	6a627e5a33	net, wgengine/capture: encode NAT addresses in pcap stream Signed-off-by: Tom DNetto <tom@tailscale.com>	2 years ago
valscale	7bfb7744b7	derp,magicsock: add debug envknobs for HTTP and derp server name (#7744 ) Make developing derp easier by: 1. Creating an envknob telling clients to use HTTP to connect to derp servers, so devs don't have to acquire a valid TLS cert. 2. Creating an envknob telling clients which derp server to connect to, so devs don't have to edit the ACLs in the admin console to add a custom DERP map. 3. Explaining how the -dev and -a command lines args to derper interact. To use this: 1. Run derper with -dev. 2. Run tailscaled with TS_DEBUG_USE_DERP_HTTP=1 and TS_DEBUG_USE_DERP_ADDR=localhost This will result in the client connecting to derp via HTTP on port 3340. Fixes #7700 Signed-off-by: Val <valerie@tailscale.com>	2 years ago
Jordan Whited	f475e5550c	net/neterror, wgengine/magicsock: use UDP GSO and GRO on Linux (#7791 ) This commit implements UDP offloading for Linux. GSO size is passed to and from the kernel via socket control messages. Support is probed at runtime. UDP GSO is dependent on checksum offload support on the egress netdev. UDP GSO will be disabled in the event sendmmsg() returns EIO, which is a strong signal that the egress netdev does not support checksum offload. Updates tailscale/corp#8734 Signed-off-by: Jordan Whited <jordan@tailscale.com>	2 years ago
Andrew Dunham	8d3acc9235	util/sysresources, magicsock: scale DERP buffer based on system memory This adds the util/sysresources package, which currently only contains a function to return the total memory size of the current system. Then, we modify magicsock to scale the number of buffered DERP messages based on the system's available memory, ensuring that we never use a value lower than the previous constant of 32. Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: Ib763c877de4d0d4ee88869078e7d512f6a3a148d	2 years ago
Jordan Whited	27e37cf9b3	go.mod, net/tstun, wgengine/magicsock: update wireguard-go (#7712 ) This commit updates the wireguard-go dependency to pull in fixes for the tun package, specifically 052af4a and aad7fca. Signed-off-by: Jordan Whited <jordan@tailscale.com>	2 years ago
valscale	74eb99aed1	derp, derphttp, magicsock: send new unknown peer frame when destination is unknown (#7552 ) * wgengine/magicsock: add envknob to send CallMeMaybe to non-existent peer For testing older client version responses to the PeerGone packet format change. Updates #4326 Signed-off-by: Val <valerie@tailscale.com> * derp: remove dead sclient struct member replaceLimiter Leftover from an previous solution to the duplicate client problem. Updates #2751 Signed-off-by: Val <valerie@tailscale.com> * derp, derp/derphttp, wgengine/magicsock: add new PeerGone message type Not Here Extend the PeerGone message type by adding a reason byte. Send a PeerGone "Not Here" message when an endpoint sends a disco message to a peer that this server has no record of. Fixes #4326 Signed-off-by: Val <valerie@tailscale.com> --------- Signed-off-by: Val <valerie@tailscale.com>	2 years ago
Andrew Dunham	be107f92d3	wgengine/magicsock: track per-endpoint changes in ringbuffer This change adds a ringbuffer to each magicsock endpoint that keeps a fixed set of "changes"–debug information about what updates have been made to that endpoint. Additionally, this adds a LocalAPI endpoint and associated "debug peer-status" CLI subcommand to fetch the set of changes for a given IP or hostname. Updates tailscale/corp#9364 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I34f726a71bddd0dfa36ec05ebafffb24f6e0516a	2 years ago
Mihai Parparita	6ac6ddbb47	sockstats: switch label to enum Makes it cheaper/simpler to persist values, and encourages reuse of labels as opposed to generating an arbitrary number. Updates tailscale/corp#9230 Updates #3363 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	2 years ago
Andrew Dunham	3f8e8b04fd	cmd/tailscale, cmd/tailscaled: move portmapper debugging into tailscale CLI The debug flag on tailscaled isn't available in the macOS App Store build, since we don't have a tailscaled binary; move it to the 'tailscale debug' CLI that is available on all platforms instead, accessed over LocalAPI. Updates #7377 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I47bffe4461e036fab577c2e51e173f4003592ff7	2 years ago
Mihai Parparita	9cb332f0e2	sockstats: instrument networking code paths Uses the hooks added by tailscale/go#45 to instrument the reads and writes on the major code paths that do network I/O in the client. The convention is to use "<package>.<type>:<label>" as the annotation for the responsible code path. Enabled on iOS, macOS and Android only, since mobile platforms are the ones we're most interested in, and we are less sensitive to any throughput degradation due to the per-I/O callback overhead (macOS is also enabled for ease of testing during development). For now just exposed as counters on a /v0/sockstats PeerAPI endpoint. We also keep track of the current interface so that we can break out the stats by interface. Updates tailscale/corp#9230 Updates #3363 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	2 years ago
Denton Gentry	fdc2018d67	wgengine/magicsock: remove superfluous "discokey" from log The stringification of the discokey type now prepends "discokey:" Fixes https://github.com/tailscale/tailscale/issues/3074 Signed-off-by: Denton Gentry <dgentry@tailscale.com>	2 years ago
Tom DNetto	2ca6dd1f1d	wgengine: start logging DISCO frames to pcap stream Signed-off-by: Tom DNetto <tom@tailscale.com>	2 years ago
Andrew Dunham	7393ce5e4f	wgengine/magicsock: add envknob to print information about port selection To aid in debugging where a customer has static port-forwards set up and there are issues establishing a connection through that port. Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: Ic5558bcdb40c9119b83f79dcacf2233b07777f2a	2 years ago
Jordan Whited	39e52c4b0a	wgengine/magicsock: fix de-dup disco ping handling for netmap endpoints (#7118 ) Fixes #7116 Signed-off-by: Jordan Whited <jordan@tailscale.com>	2 years ago
Jordan Whited	7921198c05	wgengine/magicsock: de-dup disco pings (#7093 ) Fixes #7078 Signed-off-by: Jordan Whited <jordan@tailscale.com>	2 years ago
Will Norris	947c14793a	all: update tools that manage copyright headers Update all code generation tools, and those that check for license headers to use the new standard header. Also update copyright statement in LICENSE file. Fixes #6865 Signed-off-by: Will Norris <will@tailscale.com>	2 years ago
Will Norris	71029cea2d	all: update copyright and license headers This updates all source files to use a new standard header for copyright and license declaration. Notably, copyright no longer includes a date, and we now use the standard SPDX-License-Identifier header. This commit was done almost entirely mechanically with perl, and then some minimal manual fixes. Updates #6865 Signed-off-by: Will Norris <will@tailscale.com>	2 years ago
Brad Fitzpatrick	d8feeeee4c	wgengine/magicsock: fix buggy fast path in Conn.SetNetworkMap Spotted by Maisem. Fixes #6680 Change-Id: I5fdc01de8b006a1c43a2a4848f69397f54b4453a Co-authored-By: Maisem Ali <maisem@tailscale.com> Co-authored-By: Andrew Dunham <andrew@tailscale.com> Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Jordan Whited	fec888581a	wgengine/magicsock: retry failed single packet ops across rebinds (#6990 ) The single packet WriteTo() through RebindingUDPConn.WriteBatch() was not checking for a rebind between loading the PacketConn and writing to it. Same with ReadFrom()/ReadBatch(). Fixes #6989 Signed-off-by: Jordan Whited <jordan@tailscale.com>	2 years ago
Andrew Dunham	aea251d42a	cmd/testwrapper: move from corp; mark magicsock test as flaky Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: Ibab5860f5797b3db151d3c27855333e43a9088a4	2 years ago
Brad Fitzpatrick	2df38b1feb	wgengine/magicsock: quiet log flood at tailscaled shutdown When you hit control-C on a tailscaled (notably in dev mode, but also on any systemctl stop/restart), there is a flood of messages like: magicsock: doing cleanup for discovery key d:aa9c92321db0807f magicsock: doing cleanup for discovery key d:bb0f16aacadbfd46 magicsock: doing cleanup for discovery key d:b5b2d386296536f2 magicsock: doing cleanup for discovery key d:3b640649f6796c91 magicsock: doing cleanup for discovery key d:71d7b1afbcce52cd magicsock: doing cleanup for discovery key d:315b61d7e0111377 magicsock: doing cleanup for discovery key d:9301f63dce69bf45 magicsock: doing cleanup for discovery key d:376141884d6fe072 .... It can be hundreds or even tens of thousands. So don't do that. Not a useful log message during shutdown. Change-Id: I029a8510741023f740877df28adff778246c18e5 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Andrew Dunham	11ce5b7e57	ipn/ipnlocal, wgengine/magicsock: check Expired bool on Node; print error in Ping Change-Id: Ic5f533f175a6e1bb73d4957d8c3f970add42e82e Signed-off-by: Andrew Dunham <andrew@du.nham.ca>	2 years ago
Brad Fitzpatrick	be10b529ec	wgengine/magicsock: add TS_DISCO_PONG_IPV4_DELAY knob to bias IPv6 paths Fixes #6818 Change-Id: I71597a045c5b4117af69fba869cb616271c0dfe1 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	2eff9c8277	wgengine/magicsock: avoid ReadBatch/WriteBatch on old Linux kernels Fixes #6807 Change-Id: I161424ef8a7338e1941d5e43d72dc6529993a0e3 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	0f604923d3	ipn/ipnlocal: fix StatusWithoutPeers not populating parts of Status Fixes #4311 Change-Id: Iaae0615148fa7154f4ef8f66b455e3a6c2fa9df3 Co-authored-by: Claire Wang <claire@tailscale.com> Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Joe Tsai	d9df023e6f	net/connstats: enforce maximum number of connections (#6760 ) The Tailscale logging service has a hard limit on the maximum log message size that can be accepted. We want to ensure that netlog messages never exceed this limit otherwise a client cannot transmit logs. Move the goroutine for periodically dumping netlog messages from wgengine/netlog to net/connstats. This allows net/connstats to manage when it dumps messages, either based on time or by size. Updates tailscale/corp#8427 Signed-off-by: Joe Tsai <joetsai@digital-static.net>	2 years ago

1 2 3 4 5 ...

594 Commits (6b56e92acc2b512b3b35f63baac0cc394210fcbf)