35 Commits (6a627e5a3374839fbd91d17bfbd9f4f29557777c)

Author	SHA1	Message	Date
Tom DNetto	6a627e5a33	net, wgengine/capture: encode NAT addresses in pcap stream ... Signed-off-by: Tom DNetto <tom@tailscale.com>	1 year ago
Maisem Ali	0e203e414f	net/packet: add checksum update tests ... Updates tailscale/corp#8020 Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
Maisem Ali	bb31fd7d1c	net/tstun: add inital support for NAT v4 ... This adds support in tstun to utitilize the SelfNodeV4MasqAddrForThisPeer and perform the necessary modifications to the packet as it passes through tstun. Currently this only handles ICMP, UDP and TCP traffic. Subnet routers and Exit Nodes are also unsupported. Updates tailscale/corp#8020 Co-authored-by: Melanie Warrick <warrick@tailscale.com> Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
Will Norris	71029cea2d	all: update copyright and license headers ... This updates all source files to use a new standard header for copyright and license declaration. Notably, copyright no longer includes a date, and we now use the standard SPDX-License-Identifier header. This commit was done almost entirely mechanically with perl, and then some minimal manual fixes. Updates #6865 Signed-off-by: Will Norris <will@tailscale.com>	1 year ago
Brad Fitzpatrick	c1a2e2c380	net/{packet,tstun},wgengine/filter: fix unknown IP protocol handling ... 01b90df2fa added SCTP support before (with explicit parsing for ports) and 69de3bf7bf tried to add support for arbitrary IP protocols (as long as the ACL permited a port of "*", since we might not know how to find ports from an arbitrary IP protocol, if it even has such a concept). But apparently that latter commit wasn't tested end-to-end enough. It had a lot of tests, but the tests made assumptions about layering that either weren't true, or regressed since 1.20. Notably, it didn't remove the (*Filter).pre bidirectional filter that dropped all "unknown" protocol packets both leaving and entering, even if there were explicit protocol matches allowing them in. Also, don't map all unknown protocols to 0. Keep their IP protocol number parsed so it's matchable by later layers. Only reject illegal things. Fixes #6423 Updates #2162 Updates #2163 Change-Id: I9659b3ece86f4db51d644f9b34df78821758842c Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
James Tucker	146f51ce76	net/packet: fix filtering of short IPv4 fragments ... The fragment offset is an 8 byte offset rather than a byte offset, so the short packet limit is now in fragment block size in order to compare with the offset value. The packet flags are in the first 3 bits of the flags/frags byte, and so after conversion to a uint16 little endian value they are at the start, not the end of the value - the mask for extracting "more fragments" is adjusted to match this byte. Extremely short fragments less than 80 bytes are dropped, but fragments over 80 bytes are now accepted. Fixes #5727 Signed-off-by: James Tucker <james@tailscale.com>	2 years ago
Brad Fitzpatrick	8725b14056	all: migrate more code code to net/netip directly ... Instead of going through the tailscale.com/net/netaddr transitional wrappers. Updates #5162 Change-Id: I3dafd1c2effa1a6caa9b7151ecf6edd1a3fda3dd Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	a12aad6b47	all: convert more code to use net/netip directly ... perl -i -npe 's,netaddr.IPPrefixFrom,netip.PrefixFrom,' $(git grep -l -F netaddr.) perl -i -npe 's,netaddr.IPPortFrom,netip.AddrPortFrom,' $(git grep -l -F netaddr. ) perl -i -npe 's,netaddr.IPPrefix,netip.Prefix,g' $(git grep -l -F netaddr. ) perl -i -npe 's,netaddr.IPPort,netip.AddrPort,g' $(git grep -l -F netaddr. ) perl -i -npe 's,netaddr.IP\b,netip.Addr,g' $(git grep -l -F netaddr. ) perl -i -npe 's,netaddr.IPv6Raw\b,netip.AddrFrom16,g' $(git grep -l -F netaddr. ) goimports -w . Then delete some stuff from the net/netaddr shim package which is no longer neeed. Updates #5162 Change-Id: Ia7a86893fe21c7e3ee1ec823e8aba288d4566cd8 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	7eaf5e509f	net/netaddr: start migrating to net/netip via new netaddr adapter package ... Updates #5162 Change-Id: Id7bdec303b25471f69d542f8ce43805328d56c12 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
James Tucker	ae483d3446	wgengine, net/packet, cmd/tailscale: add ICMP echo ... Updates tailscale/corp#754 Signed-off-by: James Tucker <james@tailscale.com>	2 years ago
Brad Fitzpatrick	e4d8d5e78b	net/packet, wgengine/netstack: remove workaround for old gvisor ECN bug ... Fixes #2642 Change-Id: Ic02251d24a4109679645d1c8336e0f961d0cce13 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	c64af5e676	wgengine/netstack: clear TCP ECN bits before giving to gvisor ... Updates #2642 Change-Id: Ic219442a2656dd9dc99ae1dd91e907fd3d924987 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	390490e7b1	net/packet: fix typo in comment ... Change-Id: Ia666609fde18db44bf38d4e656f490fc372ac3b6 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	21741e111b	net/packet: add ICMP6Header, like ICMP4Header ... So we can generate IPv6 ping replies. Change-Id: I79a9a38d8aa242e5dfca4cd15dfaffaea6cb1aee Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	485bcdc951	net/packet: fix doc copy/paste-o ... Change-Id: I0aca490b3ccb0c124192afb362a10b19a15a3e2b Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Josh Bleecher Snyder	5666663370	net/packet: use netaddr AppendTo methods ... This lets us remote the types/strbuilder package, which had only a single user. And it's faster. name old time/op new time/op delta String/tcp4-8 175ns ± 0% 58ns ± 1% -66.95% (p=0.000 n=10+9) String/tcp6-8 226ns ± 1% 136ns ± 1% -39.85% (p=0.000 n=10+10) String/udp4-8 175ns ± 1% 58ns ± 1% -67.01% (p=0.000 n=10+9) String/udp6-8 230ns ± 1% 140ns ± 0% -39.32% (p=0.000 n=10+9) String/icmp4-8 164ns ± 0% 50ns ± 1% -69.89% (p=0.000 n=10+10) String/icmp6-8 217ns ± 1% 129ns ± 0% -40.46% (p=0.000 n=10+10) String/igmp-8 196ns ± 0% 56ns ± 1% -71.32% (p=0.000 n=10+10) String/unknown-8 2.06ns ± 1% 2.06ns ± 2% ~ (p=0.985 n=10+10) name old alloc/op new alloc/op delta String/tcp4-8 32.0B ± 0% 32.0B ± 0% ~ (all equal) String/tcp6-8 168B ± 0% 96B ± 0% -42.86% (p=0.000 n=10+10) String/udp4-8 32.0B ± 0% 32.0B ± 0% ~ (all equal) String/udp6-8 168B ± 0% 96B ± 0% -42.86% (p=0.000 n=10+10) String/icmp4-8 32.0B ± 0% 32.0B ± 0% ~ (all equal) String/icmp6-8 104B ± 0% 64B ± 0% -38.46% (p=0.000 n=10+10) String/igmp-8 48.0B ± 0% 48.0B ± 0% ~ (all equal) String/unknown-8 0.00B 0.00B ~ (all equal) name old allocs/op new allocs/op delta String/tcp4-8 1.00 ± 0% 1.00 ± 0% ~ (all equal) String/tcp6-8 3.00 ± 0% 1.00 ± 0% -66.67% (p=0.000 n=10+10) String/udp4-8 1.00 ± 0% 1.00 ± 0% ~ (all equal) String/udp6-8 3.00 ± 0% 1.00 ± 0% -66.67% (p=0.000 n=10+10) String/icmp4-8 1.00 ± 0% 1.00 ± 0% ~ (all equal) String/icmp6-8 3.00 ± 0% 1.00 ± 0% -66.67% (p=0.000 n=10+10) String/igmp-8 1.00 ± 0% 1.00 ± 0% ~ (all equal) String/unknown-8 0.00 0.00 ~ (all equal) Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Josh Bleecher Snyder	25df067dd0	all: adapt to opaque netaddr types ... This commit is a mishmash of automated edits using gofmt: gofmt -r 'netaddr.IPPort{IP: a, Port: b} -> netaddr.IPPortFrom(a, b)' -w . gofmt -r 'netaddr.IPPrefix{IP: a, Port: b} -> netaddr.IPPrefixFrom(a, b)' -w . gofmt -r 'a.IP.Is4 -> a.IP().Is4' -w . gofmt -r 'a.IP.As16 -> a.IP().As16' -w . gofmt -r 'a.IP.Is6 -> a.IP().Is6' -w . gofmt -r 'a.IP.As4 -> a.IP().As4' -w . gofmt -r 'a.IP.String -> a.IP().String' -w . And regexps: \w*(.*)\.Port = (.*) -> $1 = $1.WithPort($2) \w*(.*)\.IP = (.*) -> $1 = $1.WithIP($2) And lots of manual fixups. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Brad Fitzpatrick	2384c112c9	net/packet, wgengine/{filter,tstun}: add TSMP ping ... Fixes #1467 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	1eb95c7e32	net/packet, wgengine{,/filter}: remove net/packet IPProto forwarding consts ... Only use the ones in types/ipproto now. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	01b90df2fa	net/packet, wgengine/filter: support SCTP ... Add proto to flowtrack.Tuple. Add types/ipproto leaf package to break a cycle. Server-side ACL work remains. Updates #1516 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
David Anderson	d79a2f3809	wgengine/filter: only log packets to/from non-default routes. ... Fixes tailscale/corp#1429. Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
Brad Fitzpatrick	b560386c1a	net/packet, wgengine, tstun: add inter-node TSMP protocol for connect errors ... This adds a new IP Protocol type, TSMP on protocol number 99 for sending inter-tailscale messages over WireGuard, currently just for why a peer rejects TCP SYNs (ACL rejection, shields up, and in the future: nothing listening, something listening on that port but wrong interface, etc) Updates #1094 Updates tailscale/corp#1185 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	5eeaea9ef9	net/packet: add TCPFlag type and some more constants ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
David Anderson	cb96b14bf4	net/packet: remove the custom IP4/IP6 types in favor of netaddr.IP. ... Upstream netaddr has a change that makes it alloc-free, so it's safe to use in hot codepaths. This gets rid of one of the many IP types in our codebase. Performance is currently worse across the board. This is likely due in part to netaddr.IP being a larger value type (4b -> 24b for IPv4, 16b -> 24b for IPv6), and in other part due to missing low-hanging fruit optimizations in netaddr. However, the regression is less bad than it looks at first glance, because we'd micro-optimized packet.IP* in the past few weeks. This change drops us back to roughly where we were at the 1.2 release, but with the benefit of a significant code and architectural simplification. name old time/op new time/op delta pkg:tailscale.com/net/packet goos:linux goarch:amd64 Decode/tcp4-8 12.2ns ± 5% 29.7ns ± 2% +142.32% (p=0.008 n=5+5) Decode/tcp6-8 12.6ns ± 3% 65.1ns ± 2% +418.47% (p=0.008 n=5+5) Decode/udp4-8 11.8ns ± 3% 30.5ns ± 2% +157.94% (p=0.008 n=5+5) Decode/udp6-8 27.1ns ± 1% 65.7ns ± 2% +142.36% (p=0.016 n=4+5) Decode/icmp4-8 24.6ns ± 2% 30.5ns ± 2% +23.65% (p=0.016 n=4+5) Decode/icmp6-8 22.9ns ±51% 65.5ns ± 2% +186.19% (p=0.008 n=5+5) Decode/igmp-8 18.1ns ±44% 30.2ns ± 1% +66.89% (p=0.008 n=5+5) Decode/unknown-8 20.8ns ± 1% 10.6ns ± 9% -49.11% (p=0.016 n=4+5) pkg:tailscale.com/wgengine/filter goos:linux goarch:amd64 Filter/icmp4-8 30.5ns ± 1% 77.9ns ± 3% +155.01% (p=0.008 n=5+5) Filter/tcp4_syn_in-8 43.7ns ± 3% 123.0ns ± 3% +181.72% (p=0.008 n=5+5) Filter/tcp4_syn_out-8 24.5ns ± 2% 45.7ns ± 6% +86.22% (p=0.008 n=5+5) Filter/udp4_in-8 64.8ns ± 1% 210.0ns ± 2% +223.87% (p=0.008 n=5+5) Filter/udp4_out-8 119ns ± 0% 278ns ± 0% +133.78% (p=0.016 n=4+5) Filter/icmp6-8 40.3ns ± 2% 204.4ns ± 4% +407.70% (p=0.008 n=5+5) Filter/tcp6_syn_in-8 35.3ns ± 3% 199.2ns ± 2% +464.95% (p=0.008 n=5+5) Filter/tcp6_syn_out-8 32.8ns ± 2% 81.0ns ± 2% +147.10% (p=0.008 n=5+5) Filter/udp6_in-8 106ns ± 2% 290ns ± 2% +174.48% (p=0.008 n=5+5) Filter/udp6_out-8 184ns ± 2% 314ns ± 3% +70.43% (p=0.016 n=4+5) pkg:tailscale.com/wgengine/tstun goos:linux goarch:amd64 Write-8 9.02ns ± 3% 8.92ns ± 1% ~ (p=0.421 n=5+5) name old alloc/op new alloc/op delta pkg:tailscale.com/net/packet goos:linux goarch:amd64 Decode/tcp4-8 0.00B 0.00B ~ (all equal) Decode/tcp6-8 0.00B 0.00B ~ (all equal) Decode/udp4-8 0.00B 0.00B ~ (all equal) Decode/udp6-8 0.00B 0.00B ~ (all equal) Decode/icmp4-8 0.00B 0.00B ~ (all equal) Decode/icmp6-8 0.00B 0.00B ~ (all equal) Decode/igmp-8 0.00B 0.00B ~ (all equal) Decode/unknown-8 0.00B 0.00B ~ (all equal) pkg:tailscale.com/wgengine/filter goos:linux goarch:amd64 Filter/icmp4-8 0.00B 0.00B ~ (all equal) Filter/tcp4_syn_in-8 0.00B 0.00B ~ (all equal) Filter/tcp4_syn_out-8 0.00B 0.00B ~ (all equal) Filter/udp4_in-8 0.00B 0.00B ~ (all equal) Filter/udp4_out-8 16.0B ± 0% 64.0B ± 0% +300.00% (p=0.008 n=5+5) Filter/icmp6-8 0.00B 0.00B ~ (all equal) Filter/tcp6_syn_in-8 0.00B 0.00B ~ (all equal) Filter/tcp6_syn_out-8 0.00B 0.00B ~ (all equal) Filter/udp6_in-8 0.00B 0.00B ~ (all equal) Filter/udp6_out-8 48.0B ± 0% 64.0B ± 0% +33.33% (p=0.008 n=5+5) name old allocs/op new allocs/op delta pkg:tailscale.com/net/packet goos:linux goarch:amd64 Decode/tcp4-8 0.00 0.00 ~ (all equal) Decode/tcp6-8 0.00 0.00 ~ (all equal) Decode/udp4-8 0.00 0.00 ~ (all equal) Decode/udp6-8 0.00 0.00 ~ (all equal) Decode/icmp4-8 0.00 0.00 ~ (all equal) Decode/icmp6-8 0.00 0.00 ~ (all equal) Decode/igmp-8 0.00 0.00 ~ (all equal) Decode/unknown-8 0.00 0.00 ~ (all equal) pkg:tailscale.com/wgengine/filter goos:linux goarch:amd64 Filter/icmp4-8 0.00 0.00 ~ (all equal) Filter/tcp4_syn_in-8 0.00 0.00 ~ (all equal) Filter/tcp4_syn_out-8 0.00 0.00 ~ (all equal) Filter/udp4_in-8 0.00 0.00 ~ (all equal) Filter/udp4_out-8 1.00 ± 0% 1.00 ± 0% ~ (all equal) Filter/icmp6-8 0.00 0.00 ~ (all equal) Filter/tcp6_syn_in-8 0.00 0.00 ~ (all equal) Filter/tcp6_syn_out-8 0.00 0.00 ~ (all equal) Filter/udp6_in-8 0.00 0.00 ~ (all equal) Filter/udp6_out-8 1.00 ± 0% 1.00 ± 0% ~ (all equal) Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
Josh Bleecher Snyder	b0526e8284	net/packet: remove unnecessary mark ... There's no need to mask out the bottom four bits of b[0] if we are about to shift them away.	4 years ago
Josh Bleecher Snyder	efad55cf86	net/packet: speed up packet decoding ... The compiler is failing to draw the connection between slice cap and slice len, so is missing some obvious BCE opportunities. Give it a hint by making the cap equal to the length. The generated code is smaller and cleaner, and a bit faster. name old time/op new time/op delta Decode/tcp4-8 12.2ns ± 1% 11.6ns ± 3% -5.31% (p=0.000 n=28+29) Decode/tcp6-8 12.5ns ± 2% 11.9ns ± 2% -4.84% (p=0.000 n=30+30) Decode/udp4-8 11.5ns ± 1% 11.1ns ± 1% -3.11% (p=0.000 n=25+24) Decode/udp6-8 11.8ns ± 3% 11.4ns ± 1% -3.08% (p=0.000 n=30+26) Decode/icmp4-8 11.0ns ± 3% 10.6ns ± 1% -3.38% (p=0.000 n=25+30) Decode/icmp6-8 11.4ns ± 1% 11.1ns ± 2% -2.29% (p=0.000 n=27+30) Decode/igmp-8 10.3ns ± 0% 10.0ns ± 1% -3.26% (p=0.000 n=19+23) Decode/unknown-8 8.68ns ± 1% 8.38ns ± 1% -3.55% (p=0.000 n=28+29)	4 years ago
David Anderson	2d604b3791	net/packet: represent IP6 as two uint64s. ... For the operations we perform on these types (mostly net6.Contains), this encoding is much faster. Part of #19. name old time/op new time/op delta Filter/icmp4-8 27.5ns ± 1% 28.0ns ± 2% +1.89% (p=0.016 n=5+5) Filter/tcp4_syn_in-8 38.8ns ± 2% 38.3ns ± 1% -1.24% (p=0.024 n=5+5) Filter/tcp4_syn_out-8 27.6ns ±12% 24.6ns ± 1% ~ (p=0.063 n=5+5) Filter/udp4_in-8 71.5ns ± 5% 65.9ns ± 1% -7.94% (p=0.008 n=5+5) Filter/udp4_out-8 132ns ±13% 119ns ± 1% -10.29% (p=0.008 n=5+5) Filter/icmp6-8 169ns ±10% 54ns ± 1% -68.35% (p=0.008 n=5+5) Filter/tcp6_syn_in-8 149ns ± 6% 43ns ± 1% -71.11% (p=0.008 n=5+5) Filter/tcp6_syn_out-8 37.7ns ± 4% 24.3ns ± 3% -35.51% (p=0.008 n=5+5) Filter/udp6_in-8 179ns ± 5% 103ns ± 1% -42.75% (p=0.008 n=5+5) Filter/udp6_out-8 156ns ± 3% 191ns ± 1% +22.54% (p=0.008 n=5+5) Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	04ff3c91ee	wgengine/filter: add full IPv6 support. ... Part of #19. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	a38e28da07	net/packet: documentation pass. ... Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	9ef39af2f2	net/packet: fix panic on invalid IHL field. ... Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	22bf48f37c	net/packet: remove {get,put}{16,32} indirection to encoding/binary. ... name old time/op new time/op delta Decode/tcp4-8 28.8ns ± 2% 13.1ns ± 4% -54.44% (p=0.008 n=5+5) Decode/tcp6-8 20.6ns ± 1% 12.6ns ± 2% -38.72% (p=0.008 n=5+5) Decode/udp4-8 28.2ns ± 1% 12.1ns ± 4% -57.01% (p=0.008 n=5+5) Decode/udp6-8 20.0ns ± 6% 12.1ns ± 2% -39.38% (p=0.008 n=5+5) Decode/icmp4-8 21.7ns ± 2% 11.5ns ± 1% -47.01% (p=0.008 n=5+5) Decode/icmp6-8 14.1ns ± 2% 11.8ns ± 4% -16.60% (p=0.008 n=5+5) Decode/unknown-8 9.43ns ± 2% 9.30ns ± 3% ~ (p=0.222 n=5+5) Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	55b1221db2	net/packet: support full IPv6 decoding. ... The packet filter still rejects all IPv6, but decodes enough from v6 packets to do something smarter in a followup. name time/op Decode/tcp4-8 28.8ns ± 2% Decode/tcp6-8 20.6ns ± 1% Decode/udp4-8 28.2ns ± 1% Decode/udp6-8 20.0ns ± 6% Decode/icmp4-8 21.7ns ± 2% Decode/icmp6-8 14.1ns ± 2% Decode/unknown-8 9.43ns ± 2% Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	89894c6930	net/packet: add IPv6 source and destination IPs to Parsed. ... Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	093431f5dd	net/packet: s/ParsedPacket/Parsed/ to avoid package stuttering. ... Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	427bf2134f	net/packet: rename from wgengine/packet. ... Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago