tailscale

Commit Graph

Author	SHA1	Message	Date
Kevin Liang	7f83f9fc83	Net/DNS/Publicdns: update the IPv6 range that we use to recreate route endpoint for control D In this commit I updated the Ipv6 range we use to generate Control D DOH ip, we were using the NextDNSRanges to generate Control D DOH ip, updated to use the correct range. Updates: #7946 Signed-off-by: Kevin Liang <kevinliang@tailscale.com>	2 months ago
Maisem Ali	1f51bb6891	net/tstun: do SNAT after filterPacketOutboundToWireGuard In a configuration where the local node (ip1) has a different IP (ip2) that it uses to communicate with a peer (ip3) we would do UDP flow tracking on the `ip2->ip3` tuple. When we receive the response from the peer `ip3->ip2` we would dnat it back to `ip3->ip1` which would then not match the flow track state and the packet would get dropped. To fix this, we should do flow tracking on the `ip1->ip3` tuple instead of `ip2->ip3` which requires doing SNAT after the running filterPacketOutboundToWireGuard. Updates tailscale/corp#19971, tailscale/corp#8020 Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 months ago
Maisem Ali	85b9a6c601	net/netcheck: do not add derps if IPv4/IPv6 is set to "none" It was documented as such but seems to have been dropped in a refactor, restore the behavior. This brings down the time it takes to run a single integration test by 2s which adds up quite a bit. Updates tailscale/corp#19786 Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 months ago
Maisem Ali	af97e7a793	tailcfg,all: add/plumb Node.IsJailed This adds a new bool that can be sent down from control to do jailing on the client side. Previously this would only be done from control by modifying the packet filter we sent down to clients. This would result in a lot of additional work/CPU on control, we could instead just do this on the client. This has always been a TODO which we keep putting off, might as well do it now. Updates tailscale/corp#19623 Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 months ago
Maisem Ali	e67069550b	ipn/ipnlocal,net/tstun,wgengine: create and plumb jailed packet filter This plumbs a packet filter for jailed nodes through to the tstun.Wrapper; the filter for a jailed node is equivalent to a "shields up" filter. Currently a no-op as there is no way for control to tell the client whether a peer is jailed. Updates tailscale/corp#19623 Co-authored-by: Andrew Dunham <andrew@du.nham.ca> Signed-off-by: Maisem Ali <maisem@tailscale.com> Change-Id: I5ccc5f00e197fde15dd567485b2a99d8254391ad	2 months ago
Nick Khyl	f62e678df8	net/dns/resolver, control/controlknobs, tailcfg: use UserDial instead of SystemDial to dial DNS servers Now that tsdial.Dialer.UserDial has been updated to honor the configured routes and dial external network addresses without going through Tailscale, while also being able to dial a node/subnet router on the tailnet, we can start using UserDial to forward DNS requests. This is primarily needed for DNS over TCP when forwarding requests to internal DNS servers, but we also update getKnownDoHClientForProvider to use it. Updates tailscale/corp#18725 Signed-off-by: Nick Khyl <nickk@tailscale.com>	2 months ago
Maisem Ali	5ef178fdca	net/tstun: refactor peerConfig to allow storing more details This refactors the peerConfig struct to allow storing more details about a peer and not just the masq addresses. To be used in a follow up change. As a side effect, this also makes the DNAT logic on the inbound packet stricter. Previously it would only match against the packets dst IP, not it also takes the src IP into consideration. The beahvior is at parity with the SNAT case. Updates tailscale/corp#19623 Co-authored-by: Andrew Dunham <andrew@du.nham.ca> Signed-off-by: Maisem Ali <maisem@tailscale.com> Change-Id: I5f40802bebbf0f055436eb8824e4511d0052772d	2 months ago
Nick Khyl	caa3d7594f	ipn/ipnlocal, net/tsdial: plumb routes into tsdial and use them in UserDial We'd like to use tsdial.Dialer.UserDial instead of SystemDial for DNS over TCP. This is primarily necessary to properly dial internal DNS servers accessible over Tailscale and subnet routes. However, to avoid issues when switching between Wi-Fi and cellular, we need to ensure that we don't retain connections to any external addresses on the old interface. Therefore, we need to determine which dialer to use internally based on the configured routes. This plumbs routes and localRoutes from router.Config to tsdial.Dialer, and updates UserDial to use either the peer dialer or the system dialer, depending on the network address and the configured routes. Updates tailscale/corp#18725 Fixes #4529 Signed-off-by: Nick Khyl <nickk@tailscale.com>	2 months ago
Brad Fitzpatrick	ce8969d82b	net/portmapper: add envknob to disable portmapper in localhost integration tests Updates #11962 Change-Id: I8212cd814985b455d96986de0d4c45f119516cb3 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 months ago
Brad Fitzpatrick	c3c18027c6	all: make more tests pass/skip in airplane mode Updates tailscale/corp#19786 Change-Id: Iedc6730fe91c627b556bff5325bdbaf7bf79d8e6 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 months ago
Maisem Ali	fd6ba43b97	types/views: remove duplicate SliceContainsFunc We already have `(Slice[T]).ContainsFunc`. Updates #cleanup Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 months ago
Brad Fitzpatrick	e42c4396cf	net/netcheck: don't spam on ICMP socket permission denied errors While debugging a failing test in airplane mode on macOS, I noticed netcheck logspam about ICMP socket creation permission denied errors. Apparently macOS just can't do those, or at least not in airplane mode. Not worth spamming about. Updates #cleanup Change-Id: I302620cfd3c8eabb25202d7eef040c01bd8a843c Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 months ago
Brad Fitzpatrick	ee3bd4dbda	derp/derphttp, net/netcheck: plumb netmon.Monitor to derp netcheck client Fixes #11981 Change-Id: I0e15a09f93aefb3cfddbc12d463c1c08b83e09fd Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 months ago
Andrew Dunham	f97d0ac994	net/dns/resolver: add better error wrapping To aid in debugging exactly what's going wrong, instead of the not-particularly-useful "dns udp query: context deadline exceeded" error that we currently get. Updates #3786 Updates #10768 Updates #11620 (etc.) Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I76334bf0681a8a2c72c90700f636c4174931432c	2 months ago
Andrew Dunham	be663c84c1	net/tstun: rename natConfig to peerConfig So that we can use this for additional, non-NAT configuration without it being confusing. Updates #cleanup Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I1658d59c9824217917a94ee76d2d08f0a682986f	2 months ago
Andrew Dunham	10497acc95	net/tstun: refactor natConfig to not be per-family This was a holdover from the older, pre-BART days and is no longer necessary. Updates #cleanup Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I71b892bab1898077767b9ff51cef33d59c08faf8	2 months ago
Jonathan Nobels	45b9aa0d83	net/netmon: remove spammy log statements (#11953 ) Updates tailscale/corp#18960 Tests in corp called us using the wrong logging calls. Removed. This is logged downstream anyway. Signed-off-by: Jonathan Nobels <jonathan@tailscale.com>	2 months ago
Jonathan Nobels	fa1303d632	net/netmon: swap to swift-derived defaultRoute on macos (#11936 ) Updates tailscale/corp#18960 iOS uses Apple's NetworkMonitor to track the default interface and there's no reason we shouldn't also use this on macOS, for the same reasons noted in the comments for why this change was made on iOS. This eliminates the need to load and parse the routing table when querying the defaultRouter() in almost all cases. A slight modification here (on both platforms) to fallback to the default BSD logic in the unhappy-path rather than making assumptions that may not hold. If netmon is eventually parsing AF_ROUTE and able to give a consistently correct answer for the default interface index, we can fall back to that and eliminate the Swift dependency. Signed-off-by: Jonathan Nobels <jonathan@tailscale.com>	2 months ago
Jordan Whited	a47ce618bd	net/tstun: implement env var for disabling UDP GRO on Linux (#11924 ) Certain device drivers (e.g. vxlan, geneve) do not properly handle coalesced UDP packets later in the stack, resulting in packet loss. Updates #11026 Signed-off-by: Jordan Whited <jordan@tailscale.com>	2 months ago
Brad Fitzpatrick	b9adbe2002	net/{interfaces,netmon}, all: merge net/interfaces package into net/netmon In prep for most of the package funcs in net/interfaces to become methods in a long-lived netmon.Monitor that can cache things. (Many of the funcs are very heavy to call regularly, whereas the long-lived netmon.Monitor can subscribe to things from the OS and remember answers to questions it's asked regularly later) Updates tailscale/corp#10910 Updates tailscale/corp#18960 Updates #7967 Updates #3299 Change-Id: Ie4e8dedb70136af2d611b990b865a822cd1797e5 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 months ago
Brad Fitzpatrick	6b95219e3a	net/netmon, add: add netmon.State type alias of interfaces.State ... in prep for merging the net/interfaces package into net/netmon. This is a no-op change that updates a bunch of the API signatures ahead of a future change to actually move things (and remove the type alias) Updates tailscale/corp#10910 Updates tailscale/corp#18960 Updates #7967 Updates #3299 Change-Id: I477613388f09389214db0d77ccf24a65bff2199c Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 months ago
Brad Fitzpatrick	3672f29a4e	net/netns, net/dns/resolver, etc: make netmon required in most places The goal is to move more network state accessors to netmon.Monitor where they can be cheaper/cached. But first (this change and others) we need to make sure the one netmon.Monitor is plumbed everywhere. Some notable bits: * tsdial.NewDialer is added, taking a now-required netmon * because a tsdial.Dialer always has a netmon, anything taking both a Dialer and a NetMon is now redundant; take only the Dialer and get the NetMon from that if/when needed. * netmon.NewStatic is added, primarily for tests Updates tailscale/corp#10910 Updates tailscale/corp#18960 Updates #7967 Updates #3299 Change-Id: I877f9cb87618c4eb037cee098241d18da9c01691 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 months ago
Brad Fitzpatrick	7a62dddeac	net/netcheck, wgengine/magicsock: make netmon.Monitor required This has been a TODO for ages. Time to do it. The goal is to move more network state accessors to netmon.Monitor where they can be cheaper/cached. Updates tailscale/corp#10910 Updates tailscale/corp#18960 Updates #7967 Updates #3299 Change-Id: I60fc6508cd2d8d079260bda371fc08b6318bcaf1 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 months ago
Brad Fitzpatrick	4dece0c359	net/netutil: remove a use of deprecated interfaces.GetState I'm working on moving all network state queries to be on netmon.Monitor, removing old APIs. Updates tailscale/corp#10910 Updates tailscale/corp#18960 Updates #7967 Updates #3299 Change-Id: If0de137e0e2e145520f69e258597fb89cf39a2a3 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 months ago
Brad Fitzpatrick	745931415c	health, all: remove health.Global, finish plumbing health.Tracker Updates #11874 Updates #4136 Change-Id: I414470f71d90be9889d44c3afd53956d9f26cd61 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 months ago
Brad Fitzpatrick	723c775dbb	tsd, ipnlocal, etc: add tsd.System.HealthTracker, start some plumbing This adds a health.Tracker to tsd.System, accessible via a new tsd.System.HealthTracker method. In the future, that new method will return a tsd.System-specific HealthTracker, so multiple tsnet.Servers in the same process are isolated. For now, though, it just always returns the temporary health.Global value. That permits incremental plumbing over a number of changes. When the second to last health.Global reference is gone, then the tsd.System.HealthTracker implementation can return a private Tracker. The primary plumbing this does is adding it to LocalBackend and its dozen and change health calls. A few misc other callers are also plumbed. Subsequent changes will flesh out other parts of the tree (magicsock, controlclient, etc). Updates #11874 Updates #4136 Change-Id: Id51e73cfc8a39110425b6dc19d18b3975eac75ce Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 months ago
Brad Fitzpatrick	5b32264033	health: break Warnable into a global and per-Tracker value halves Previously it was both metadata about the class of warnable item as well as the value. Now it's only metadata and the value is per-Tracker. Updates #11874 Updates #4136 Change-Id: Ia1ed1b6c95d34bc5aae36cffdb04279e6ba77015 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 months ago
Brad Fitzpatrick	ebc552d2e0	health: add Tracker type, in prep for removing global variables This moves most of the health package global variables to a new `health.Tracker` type. But then rather than plumbing the Tracker in tsd.System everywhere, this only goes halfway and makes one new global Tracker (`health.Global`) that all the existing callers now use. A future change will eliminate that global. Updates #11874 Updates #4136 Change-Id: I6ee27e0b2e35f68cb38fecdb3b2dc4c3f2e09d68 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 months ago
Andrew Dunham	375617c5c8	net/tsdial: assume all connections are affected if no default route is present If this happens, it results in us pessimistically closing more connections than might be necessary, but is more correct since we won't "miss" a change to the default route interface and keep trying to send data over a nonexistent interface, or one that can't reach the internet. Updates tailscale/corp#19124 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: Ia0b8b04cb8cdcb0da0155fd08751c9dccba62c1a	2 months ago
kari-ts	048cb61dd0	interfaces: create android impl (#11784 ) -Move Android impl into interfaces_android.go -Instead of using ip route to get the interface name, use the one passed in by Android (ip route is restricted in Android 13+ per termux/termux-app#2993) Follow-up will be to do the same for router Fixes tailscale/corp#19215 Fixes tailscale/corp#19124 Signed-off-by: kari-ts <kari@tailscale.com>	2 months ago
Andrew Dunham	b85c2b2313	net/dns/resolver: use SystemDial in DoH forwarder This ensures that we close the underlying connection(s) when a major link change happens. If we don't do this, on mobile platforms switching between WiFi and cellular can result in leftover connections in the http.Client's connection pool which are bound to the "wrong" interface. Updates #10821 Updates tailscale/corp#19124 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: Ibd51ce2efcaf4bd68e14f6fdeded61d4e99f9a01	2 months ago
Andrew Dunham	226486eb9a	net/interfaces: handle removed interfaces in State.Equal This wasn't previously handling the case where an interface in s2 was removed and not present in s1, and would cause the Equal method to incorrectly return that the states were equal. Updates tailscale/corp#19124 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I3af22bc631015d1ddd0a1d01bfdf312161b9532d	2 months ago
Brad Fitzpatrick	7c1d6e35a5	all: use Go 1.22 range-over-int Updates #11058 Change-Id: I35e7ef9b90e83cac04ca93fd964ad00ed5b48430 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 months ago
Brad Fitzpatrick	068db1f972	net/interfaces: delete unused unexported function It should've been deleted in `11ece02f52`. Updates #9040 Change-Id: If8a136bdb6c82804af658c9d2b0a8c63ce02d509 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 months ago
Brad Fitzpatrick	a1abd12f35	cmd/tailscaled, net/tstun: build for aix/ppc64 At least in userspace-networking mode. Fixes #11361 Change-Id: I78d33f0f7e05fe9e9ee95b97c99b593f8fe498f2 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 months ago
Aaron Klotz	4d5d669cd5	net/dns: unconditionally write NRPT rules to local settings We were being too aggressive when deciding whether to write our NRPT rules to the local registry key or the group policy registry key. After once again reviewing the document which calls itself a spec (see issue), it is clear that the presence of the DnsPolicyConfig subkey is the important part, not the presence of values set in the DNSClient subkey. Furthermore, a footnote indicates that the presence of DnsPolicyConfig in the GPO key will always override its counterpart in the local key. The implication of this is important: we may unconditionally write our NRPT rules to the local key. We copy our rules to the policy key only when it contains NRPT rules belonging to somebody other than us. Fixes https://github.com/tailscale/corp/issues/19071 Signed-off-by: Aaron Klotz <aaron@tailscale.com>	3 months ago
James Tucker	db760d0bac	cmd/tailscaled: move cleanup to an implicit action during startup This removes a potentially increased boot delay for certain boot topologies where they block on ExecStartPre that may have socket activation dependencies on other system services (such as systemd-resolved and NetworkManager). Also rename cleanup to clean up in affected/immediately nearby places per code review commentary. Fixes #11599 Signed-off-by: James Tucker <james@tailscale.com>	3 months ago
Brad Fitzpatrick	b0fbd85592	net/tsdial: partially fix "tailscale nc" (UserDial) on macOS At least in the case of dialing a Tailscale IP. Updates #4529 Change-Id: I9fd667d088a14aec4a56e23aabc2b1ffddafa3fe Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 months ago
alexelisenko	fe22032fb3	net/dns/{publicdns,resolver}: add start of Control D support Updates #7946 [@bradfitz fixed up version of #8417] Change-Id: I1dbf6fa8d525b25c0d7ad5c559a7f937c3cd142a Signed-off-by: alexelisenko <39712468+alexelisenko@users.noreply.github.com> Signed-off-by: Alex Paguis <alex@windscribe.com>	3 months ago
James Tucker	6e334e64a1	net/netcheck,wgengine/magicsock: align DERP frame receive time heuristics The netcheck package and the magicksock package coordinate via the health package, but both sides have time based heuristics through indirect dependencies. These were misaligned, so the implemented heuristic aimed at reducing DERP moves while there is active traffic were non-operational about 3/5ths of the time. It is problematic to setup a good test for this integration presently, so instead I added comment breadcrumbs along with the initial fix. Updates #8603 Signed-off-by: James Tucker <james@tailscale.com>	3 months ago
Brad Fitzpatrick	8d7894c68e	clientupdate, net/dns: fix some "tailsacle" typos Updates #cleanup Change-Id: I982175e74b0c8c5b3e01a573e5785e6596b7ac39 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 months ago
James Tucker	f384742375	net/packet: allow more ICMP errors We now allow some more ICMP errors to flow, specifically: - ICMP parameter problem in both IPv4 and IPv6 (corrupt headers) - ICMP Packet Too Big (for IPv6 PMTU) Updates #311 Updates #8102 Updates #11002 Signed-off-by: James Tucker <james@tailscale.com>	3 months ago
Asutorufa	e20ce7bf0c	net/dns: close ctx when close dns directManager Signed-off-by: Asutorufa <16442314+Asutorufa@users.noreply.github.com>	3 months ago
Percy Wegmann	8b8b315258	net/tstun: use gaissmai/bart instead of tempfork/device This implementation uses less memory than tempfork/device, which helps avoid OOM conditions in the iOS VPN extension when switching to a Tailnet with ExitNode routing enabled. Updates tailscale/corp#18514 Signed-off-by: Percy Wegmann <percy@tailscale.com>	3 months ago
Brad Fitzpatrick	a36cfb4d3d	tailcfg, ipn/ipnlocal, wgengine/magicsock: add only-tcp-443 node attr Updates tailscale/corp#17879 Change-Id: I0dc305d147b76c409cf729b599a94fa723aef0e0 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 months ago
Anton Tolchanov	cf8948da5f	net/routetable: increase route limit used by the test I was running all tests while preparing a recent stable release, and this was failing because my computer is connected to a fairly large tailnet. ``` --- FAIL: TestGetRouteTable (0.01s) routetable_linux_test.go:32: expected at least one default route; ... ``` ``` $ ip route show table 52 \| wc -l 1051 ``` Updates #cleanup Signed-off-by: Anton Tolchanov <anton@tailscale.com>	4 months ago
Andrew Dunham	9884d06b80	net/interfaces: fix test hang on Darwin This test could hang because the subprocess was blocked on writing to the stdout pipe if we find the address we're looking for early in the output. Updates #cleanup Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I68d82c22a5d782098187ae6d8577e43063b72573	4 months ago
Andrew Dunham	62cf83eb92	go.mod: bump gvisor The `stack.PacketBufferPtr` type no longer exists; replace it with `*stack.PacketBuffer` instead. Updates #8043 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: Ib56ceff09166a042aa3d9b80f50b2aa2d34b3683	4 months ago
Andrew Dunham	3dd8ae2f26	net/tstun: fix spelling of "WireGuard" Updates #cleanup Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: Ida7e30f4689bc18f5f7502f53a0adb5ac3c7981a	4 months ago
Anton Tolchanov	8cc5c51888	health: warn about reverse path filtering and exit nodes When reverse path filtering is in strict mode on Linux, using an exit node blocks all network connectivity. This change adds a warning about this to `tailscale status` and the logs. Example in `tailscale status`: ``` - not connected to home DERP region 22 - The following issues on your machine will likely make usage of exit nodes impossible: [interface "eth0" has strict reverse-path filtering enabled], please set rp_filter=2 instead of rp_filter=1; see https://github.com/tailscale/tailscale/issues/3310 ``` Example in the logs: ``` 2024/02/21 21:17:07 health("overall"): error: multiple errors: not in map poll The following issues on your machine will likely make usage of exit nodes impossible: [interface "eth0" has strict reverse-path filtering enabled], please set rp_filter=2 instead of rp_filter=1; see https://github.com/tailscale/tailscale/issues/3310 ``` Updates #3310 Signed-off-by: Anton Tolchanov <anton@tailscale.com>	4 months ago

1 2 3 4 5 ...

1011 Commits (6831a29f8b9344653aed841543f9bb3e73285b0b)