tailscale

Commit Graph

Author	SHA1	Message	Date
Aaron Klotz	7dd76c3411	net/netns: add Windows support for bind-to-interface-by-route This is implemented via GetBestInterfaceEx. Should we encounter errors or fail to resolve a valid, non-Tailscale interface, we fall back to returning the index for the default interface instead. Fixes #12551 Signed-off-by: Aaron Klotz <aaron@tailscale.com>	5 months ago
Brad Fitzpatrick	91786ff958	cmd/derper: add debug endpoint to adjust mutex profiling rate Updates #3560 Change-Id: I474421ce75c79fb66e1c306ed47daebc5a0e069e Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 months ago
Jordan Whited	0d6e71df70	cmd/stunstamp: add explicit metric to track timeout events (#12564 ) Timeouts could already be identified as NaN values on stunstamp_derp_stun_rtt_ns, but we can't use NaN effectively with promql to visualize them. So, this commit adds a timeouts metric that we can use with rate/delta/etc promql functions. Updates tailscale/corp#20689 Signed-off-by: Jordan Whited <jordan@tailscale.com>	5 months ago
Kristoffer Dalby	dcb0f189cc	cmd/proxy-to-grafana: add flag for alternative control server Fixes #12571 Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>	5 months ago
Andrew Dunham	24976b5bfd	cmd/tailscale/cli: actually perform Noise request in 'debug ts2021' This actually performs a Noise request in the 'debug ts2021' command, instead of just exiting once we've dialed a connection. This can help debug certain forms of captive portals and deep packet inspection that will allow a connection, but will RST the connection when trying to send data on the post-upgraded TCP connection. Updates #1634 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I1e46ca9c9a0751c55f16373a6a76cdc24fec1f18	5 months ago
Andrew Dunham	732605f961	control/controlclient: move noiseConn to internal package So that it can be later used in the 'tailscale debug ts2021' function in the CLI, to aid in debugging captive portals/WAFs/etc. Updates #1634 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: Iec9423f5e7570f2c2c8218d27fc0902137e73909	5 months ago
Andrea Gottardo	8eb15d3d2d	cli/netcheck: fail with output if we time out fetching a derpmap (#12528 ) Updates tailscale/corp#20969 Right now, when netcheck starts, it asks tailscaled for a copy of the DERPMap. If it doesn't have one, it makes a HTTPS request to controlplane.tailscale.com to fetch one. This will always fail if you're on a network with a captive portal actively blocking HTTPS traffic. The code appears to hang entirely because the http.Client doesn't have a Timeout set. It just sits there waiting until the request succeeds or fails. This adds a timeout of 10 seconds, and logs more details about the status of the HTTPS request. Signed-off-by: Andrea Gottardo <andrea@gottardo.me>	5 months ago
Jordan Whited	a93173b56a	cmd/xdpderper,derp/xdp: implement mode that drops STUN packets (#12527 ) This is useful during maintenance as a method for shedding home client load. Updates tailscale/corp#20689 Signed-off-by: Jordan Whited <jordan@tailscale.com>	5 months ago
Tom Proctor	3099323976	cmd/k8s-operator,k8s-operator,go.{mod,sum}: publish proxy status condition for annotated services (#12463 ) Adds a new TailscaleProxyReady condition type for use in corev1.Service conditions. Also switch our CRDs to use metav1.Condition instead of ConnectorCondition. The Go structs are seralized identically, but it updates some descriptions and validation rules. Update k8s controller-tools and controller-runtime deps to fix the documentation generation for metav1.Condition so that it excludes comments and TODOs. Stop expecting the fake client to populate TypeMeta in tests. See kubernetes-sigs/controller-runtime#2633 for details of the change. Finally, make some minor improvements to validation for service hostnames. Fixes #12216 Co-authored-by: Irbe Krumina <irbe@tailscale.com> Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>	5 months ago
Andrew Dunham	45d2f4301f	proxymap, various: distinguish between different protocols Previously, we were registering TCP and UDP connections in the same map, which could result in erroneously removing a mapping if one of the two connections completes while the other one is still active. Add a "proto string" argument to these functions to avoid this. Additionally, take the "proto" argument in LocalAPI, and plumb that through from the CLI and add a new LocalClient method. Updates tailscale/corp#20600 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I35d5efaefdfbf4721e315b8ca123f0c8af9125fb	5 months ago
Irbe Krumina	8cc2738609	cmd/{containerboot,k8s-operator}: store proxy device ID early to help with cleanup for broken proxies (#12425 ) * cmd/containerboot: store device ID before setting up proxy routes. For containerboot instances whose state needs to be stored in a Kubernetes Secret, we additonally store the device's ID, FQDN and IPs. This is used, between other, by the Kubernetes operator, who uses the ID to delete the device when resources need cleaning up and writes the FQDN and IPs on various kube resource statuses for visibility. This change shifts storing device ID earlier in the proxy setup flow, to ensure that if proxy routing setup fails, the device can still be deleted. Updates tailscale/tailscale#12146 Signed-off-by: Irbe Krumina <irbe@tailscale.com> * code review feedback Signed-off-by: Irbe Krumina <irbe@tailscale.com> --------- Signed-off-by: Irbe Krumina <irbe@tailscale.com>	5 months ago
Andrew Lytvynov	674c998e93	cmd/tailscale/cli: do not allow update --version on macOS (#12508 ) We do not support specific version updates or track switching on macOS. Do not populate the flag to avoid confusion. Updates #cleanup Signed-off-by: Andrew Lytvynov <awly@tailscale.com>	5 months ago
Brad Fitzpatrick	86e0f9b912	net/ipset, wgengine/filter/filtertype: add split-out packages This moves NewContainsIPFunc from tsaddr to new ipset package. And wgengine/filter types gets split into wgengine/filter/filtertype, so netmap (and thus the CLI, etc) doesn't need to bring in ipset, bart, etc. Then add a test making sure the CLI deps don't regress. Updates #1278 Change-Id: Ia246d6d9502bbefbdeacc4aef1bed9c8b24f54d5 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 months ago
Brad Fitzpatrick	64ac64fb66	net/tsaddr: use bart in NewContainsIPFunc, add tests, benchmarks NewContainsIPFunc was previously documented as performing poorly if there were many netip.Prefixes to search over. As such, we never it used it in such cases. This updates it to use bart at a certain threshold (over 6 prefixes, currently), at which point the bart lookup overhead pays off. This is currently kinda useless because we're not using it. But now we can and get wins elsewhere. And we can remove the caveat in the docs. goos: darwin goarch: arm64 pkg: tailscale.com/net/tsaddr │ before │ after │ │ sec/op │ sec/op vs base │ NewContainsIPFunc/empty-8 2.215n ± 11% 2.239n ± 1% +1.08% (p=0.022 n=10) NewContainsIPFunc/cidr-list-1-8 17.44n ± 0% 17.59n ± 6% +0.89% (p=0.000 n=10) NewContainsIPFunc/cidr-list-2-8 27.85n ± 0% 28.13n ± 1% +1.01% (p=0.000 n=10) NewContainsIPFunc/cidr-list-3-8 36.05n ± 0% 36.56n ± 13% +1.41% (p=0.000 n=10) NewContainsIPFunc/cidr-list-4-8 43.73n ± 0% 44.38n ± 1% +1.50% (p=0.000 n=10) NewContainsIPFunc/cidr-list-5-8 51.61n ± 2% 51.75n ± 0% ~ (p=0.101 n=10) NewContainsIPFunc/cidr-list-10-8 95.65n ± 0% 68.92n ± 0% -27.94% (p=0.000 n=10) NewContainsIPFunc/one-ip-8 4.466n ± 0% 4.469n ± 1% ~ (p=0.491 n=10) NewContainsIPFunc/two-ip-8 8.002n ± 1% 7.997n ± 4% ~ (p=0.697 n=10) NewContainsIPFunc/three-ip-8 27.98n ± 1% 27.75n ± 0% -0.82% (p=0.012 n=10) geomean 19.60n 19.07n -2.71% Updates #12486 Change-Id: I2e2320cc4384f875f41721374da536bab995c1ce Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 months ago
Maisem Ali	491483d599	cmd/viewer,type/views: add MapSlice for maps of slices This abstraction provides a nicer way to work with maps of slices without having to write out three long type params. This also allows it to provide an AsMap implementation which copies the map and the slices at least. Updates tailscale/corp#20910 Signed-off-by: Maisem Ali <maisem@tailscale.com>	5 months ago
Nick Khyl	c32efd9118	various: create a catch-all NRPT rule when "Override local DNS" is enabled on Windows Without this rule, Windows 8.1 and newer devices issue parallel DNS requests to DNS servers associated with all network adapters, even when "Override local DNS" is enabled and/or a Mullvad exit node is being used, resulting in DNS leaks. This also adds "disable-local-dns-override-via-nrpt" nodeAttr that can be used to disable the new behavior if needed. Fixes tailscale/corp#20718 Signed-off-by: Nick Khyl <nickk@tailscale.com>	5 months ago
Aaron Klotz	bd2a6d5386	util/winutil: add UserProfile type for (un)loading user profiles S4U logons do not automatically load the associated user profile. In this PR we add UserProfile to handle that part. Windows docs indicate that we should try to resolve a remote profile path when present, so we attempt to do so when the local computer is joined to a domain. Updates #12383 Signed-off-by: Aaron Klotz <aaron@tailscale.com>	5 months ago
Jordan Whited	9189fe007b	cmd/stunc: support user-specified port (#12469 ) Updates tailscale/corp#20689 Signed-off-by: Jordan Whited <jordan@tailscale.com>	5 months ago
Jordan Whited	65888d95c9	derp/xdp,cmd/xdpderper: initial skeleton (#12390 ) This commit introduces a userspace program for managing an experimental eBPF XDP STUN server program. derp/xdp contains the eBPF pseudo-C along with a Go pkg for loading it and exporting its metrics. cmd/xdpderper is a package main user of derp/xdp. Updates tailscale/corp#20689 Signed-off-by: Jordan Whited <jordan@tailscale.com>	5 months ago
Brad Fitzpatrick	ccdd2e6650	cmd/derper: add a README Updates tailscale/corp#20844 Change-Id: Ie3ca5dd7f582f4f298339dd3cd2039243c204ef8 Co-authored-by: James Tucker <james@tailscale.com> Co-authored-by: Maisem Ali <maisem@tailscale.com> Co-authored-by: Andrew Dunham <andrew@tailscale.com> Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	6 months ago
JunYanBJSS	4c01ce9f43	tsnet: fix error formatting bug Fixes #12411 Signed-off-by: JunYanBJSS <johnnycocoyan@hotmail.com>	6 months ago
Aaron Klotz	3511d1f8a2	cmd/tailscaled, net/dns, wgengine/router: start Windows child processes with DETACHED_PROCESS when I/O is being piped When we're starting child processes on Windows that are CLI programs that don't need to output to a console, we should pass in DETACHED_PROCESS as a CreationFlag on SysProcAttr. This prevents the OS from even creating a console for the child (and paying the associated time/space penalty for new conhost processes). This is more efficient than letting the OS create the console window and then subsequently trying to hide it, which we were doing at a few callsites. Fixes #12270 Signed-off-by: Aaron Klotz <aaron@tailscale.com>	6 months ago
Irbe Krumina	bc53ebd4a0	ipn/{ipnlocal,localapi},net/netkernelconf,client/tailscale,cmd/containerboot: optionally enable UDP GRO forwarding for containers (#12410 ) Add a new TS_EXPERIMENTAL_ENABLE_FORWARDING_OPTIMIZATIONS env var that can be set for tailscale/tailscale container running as a subnet router or exit node to enable UDP GRO forwarding for improved performance. See https://tailscale.com/kb/1320/performance-best-practices#linux-optimizations-for-subnet-routers-and-exit-nodes This is currently considered an experimental approach; the configuration support is partially to allow further experimentation with containerized environments to evaluate the performance improvements. Updates tailscale/tailscale#12295 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	6 months ago
Irbe Krumina	6f2bae019f	cmd/k8s-nameserver: fix AAAA record query response (#12412 ) Return empty response and NOERROR for AAAA record queries for DNS names for which we have an A record. This is to allow for callers that might be first sending an AAAA query and then, if that does not return a response, follow with an A record query. Previously we were returning NOTIMPL that caused some callers to potentially not follow with an A record query or misbehave in different ways. Also return NXDOMAIN for AAAA record queries for names that we DO NOT have an A record for to ensure that the callers do not follow up with an A record query. Returning an empty response and NOERROR is the behaviour that RFC 4074 recommends: https://datatracker.ietf.org/doc/html/rfc4074 Updates tailscale/tailscale#12321 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	6 months ago
Aaron Klotz	df86576989	util/winutil: add AllocateContiguousBuffer and SetNTString helper funcs AllocateContiguousBuffer is for allocating structs with trailing buffers containing additional data. It is to be used for various Windows structures containing pointers to data located immediately after the struct. SetNTString performs in-place setting of windows.NTString and windows.NTUnicodeString. Updates #12383 Signed-off-by: Aaron Klotz <aaron@tailscale.com>	6 months ago
Irbe Krumina	c3e2b7347b	tailcfg,cmd/k8s-operator,kube: move Kubernetes cap to a location that can be shared with control (#12236 ) This PR is in prep of adding logic to control to be able to parse tailscale.com/cap/kubernetes grants in control: - moves the type definition of PeerCapabilityKubernetes cap to a location shared with control. - update the Kubernetes cap rule definition with fields for granting kubectl exec session recording capabilities. - adds a convenience function to produce tailcfg.RawMessage from an arbitrary cap rule and a test for it. An example grant defined via ACLs: "grants": [{ "src": ["tag:eng"], "dst": ["tag:k8s-operator"], "app": { "tailscale.com/cap/kubernetes": [{ "recorder": ["tag:my-recorder"] “enforceRecorder”: true }], }, } ] This grant enforces `kubectl exec` sessions from tailnet clients, matching `tag:eng` via API server proxy matching `tag:k8s-operator` to be recorded and recording to be sent to a tsrecorder instance, matching `tag:my-recorder`. The type needs to be shared with control because we want control to parse this cap and resolve tags to peer IPs. Updates tailscale/corp#19821 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	6 months ago
Irbe Krumina	807934f00c	cmd/k8s-operator,k8s-operator: allow proxies accept advertized routes. (#12388 ) Add a new .spec.tailscale.acceptRoutes field to ProxyClass, that can be optionally set to true for the proxies to accept routes advertized by other nodes on tailnet (equivalent of setting --accept-routes to true). Updates tailscale/tailscale#12322,tailscale/tailscale#10684 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	6 months ago
Irbe Krumina	53d9cac196	k8s-operator/apis/v1alpha1,cmd/k8s-operator/deploy/examples: update DNSConfig description (#11971 ) Also removes hardcoded image repo/tag from example DNSConfig resource as the operator now knows how to default those. Updates tailscale/tailscale#11019 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	6 months ago
Tom Proctor	23e26e589f	cmd/k8s-operator,k8s-opeerator: include Connector's MagicDNS name and tailnet IPs in status (#12359 ) Add new fields TailnetIPs and Hostname to Connector Status. These contain the addresses of the Tailscale node that the operator created for the Connector to aid debugging. Fixes #12214 Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>	6 months ago
Irbe Krumina	3a6d3f1a5b	cmd/k8s-operator,k8s-operator,go.{mod,sum}: make individual proxy images/image pull policies configurable (#11928 ) cmd/k8s-operator,k8s-operator,go.{mod,sum}: make individual proxy images/image pull policies configurable Allow to configure images and image pull policies for individual proxies via ProxyClass.Spec.StatefulSet.Pod.{TailscaleContainer,TailscaleInitContainer}.Image, and ProxyClass.Spec.StatefulSet.Pod.{TailscaleContainer,TailscaleInitContainer}.ImagePullPolicy fields. Document that we have images in ghcr.io on the relevant Helm chart fields. Updates tailscale/tailscale#11675 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	6 months ago
Andrew Dunham	e88a5dbc92	various: fix lint warnings Some lint warnings caught by running 'make lint' locally. Updates #cleanup Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I1534ed6f2f5e1eb029658906f9d62607dad98ca3	6 months ago
Brad Fitzpatrick	8a11a43c28	cmd/derpprobe: support 'local' derpmap to get derp map via LocalAPI To make it easier for people to monitor their custom DERP fleet. Updates tailscale/corp#20654 Change-Id: Id8af22936a6d893cc7b6186d298ab794a2672524 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	6 months ago
Jordan Whited	6e106712f6	cmd/stunstamp: support probing multiple ports (#12356 ) Updates tailscale/corp#20344 Signed-off-by: Jordan Whited <jordan@tailscale.com>	6 months ago
Maisem Ali	36e8e8cd64	wgengine/magicsock: use math/rands/v2 Updates #11058 Co-authored-by: James Tucker <james@tailscale.com> Signed-off-by: Maisem Ali <maisem@tailscale.com>	6 months ago
Fran Bull	573c8bd8c7	cmd/natc: add --wg-port flag Updates tailscale/corp#20503 Signed-off-by: Fran Bull <fran@tailscale.com>	6 months ago
Maisem Ali	4a8cb1d9f3	all: use math/rand/v2 more Updates #11058 Signed-off-by: Maisem Ali <maisem@tailscale.com>	6 months ago
Fran Bull	d2d459d442	cmd/natc: add --ignore-destinations flag Updates tailscale/corp#20503 Signed-off-by: Fran Bull <fran@tailscale.com>	6 months ago
Jordan Whited	cf1e6c6e55	cmd/stunstamp: fix remote write retry (#12348 ) Evaluation of remote write errors was using errors.Is() where it should have been using errors.As(). Updates tailscale/corp#20344 Signed-off-by: Jordan Whited <jordan@tailscale.com>	6 months ago
Irbe Krumina	82576190a7	tailcfg,cmd/k8s-operator: moves tailscale.com/cap/kubernetes peer cap to tailcfg (#12235 ) This is done in preparation for adding kubectl session recording rules to this capability grant that will need to be unmarshalled by control, so will also need to be in a shared location. Updates tailscale/corp#19821 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	6 months ago
signed-long	1dc3136a24	cmd/k8s-operator: Support image 'repo' or 'repository' keys in helm values file (#12285 ) cmd/k8s-operator/deploy/chart: Support image 'repo' or 'repository' keys in helm values Fixes #12100 Signed-off-by: Michael Long <michaelongdev@gmail.com>	6 months ago
Jordan Whited	ba0dd493c8	cmd/stunstamp: validate STUN tx ID in responses (#12339 ) Extremely late arriving responses may leak across probing intervals. Updates tailscale/corp#20344 Signed-off-by: Jordan Whited <jordan@tailscale.com>	6 months ago
Maisem Ali	2f2f588c80	cmd/natc: use ListenPacket Now that tsnet supports it, use it. Updates tailscale/corp#20503 Signed-off-by: Maisem Ali <maisem@tailscale.com>	6 months ago
Maisem Ali	0b1a8586eb	cmd/natc: initial implementation of a NAT based connector This adds a new prototype `cmd/natc` which can be used to expose a services/domains to the tailnet. It requires the user to specify a set of IPv4 prefixes from the CGNAT range. It advertises these as normal subnet routes. It listens for DNS on the first IP of the first range provided to it. When it gets a DNS query it allocates an IP for that domain from the v4 range. Subsequent connections to the assigned IP are then tcp proxied to the domain. It is marked as a WIP prototype and requires the use of the `TAILSCALE_USE_WIP_CODE` env var. Updates tailscale/corp#20503 Signed-off-by: Maisem Ali <maisem@tailscale.com>	6 months ago
Jordan Whited	d21c00205d	cmd/stunstamp: implement service to measure DERP STUN RTT (#12241 ) stunstamp timestamping includes userspace and SO_TIMESTAMPING kernel timestamping where available. Measurements are written locally to a sqlite DB, exposed over an HTTP API, and written to prometheus via remote-write protocol. Updates tailscale/corp#20344 Signed-off-by: Jordan Whited <jordan@tailscale.com>	6 months ago
Maisem Ali	42cfbf427c	tsnet,wgengine/netstack: add ListenPacket and tests This adds a new ListenPacket function on tsnet.Server which acts mostly like `net.ListenPacket`. Unlike `Server.Listen`, this requires listening on a specific IP and does not automatically listen on both V4 and V6 addresses of the Server when the IP is unspecified. To test this, it also adds UDP support to tsdial.Dialer.UserDial and plumbs it through the localapi. Then an associated test to make sure the UDP functionality works from both sides. Updates #12182 Signed-off-by: Maisem Ali <maisem@tailscale.com>	6 months ago
Irbe Krumina	c2a4719e9e	cmd/tailscale/cli: allow 'tailscale up' to succeed if --stateful-filtering is not explicitly set on linux (#12312 ) This fixes an issue where, on containerized environments an upgrade 1.66.3 -> 1.66.4 failed with default containerboot configuration. This was because containerboot by default runs 'tailscale up' that requires all previously set flags to be explicitly provided on subsequent runs and we explicitly set --stateful-filtering to true on 1.66.3, removed that settingon 1.66.4. Updates tailscale/tailscale#12307 Signed-off-by: Irbe Krumina <irbe@tailscale.com> Co-authored-by: Andrew Lytvynov <awly@tailscale.com>	6 months ago
ChandonPierre	0a5bd63d32	ipn/store/kubestore, cmd/containerboot: allow overriding client api server URL via ENV (#12115 ) Updates tailscale/tailscale#11397 Signed-off-by: Chandon Pierre <cpierre@coreweave.com>	6 months ago
Anton Tolchanov	32120932a5	cmd/tailscale/cli: print node signature in `tailscale lock status` - Add current node signature to `ipnstate.NetworkLockStatus`; - Print current node signature in a human-friendly format as part of `tailscale lock status`. Examples: ``` $ tailscale lock status Tailnet lock is ENABLED. This node is accessible under tailnet lock. Node signature: SigKind: direct Pubkey: [OTB3a] KeyID: tlpub:44a0e23cd53a4b8acc02f6732813d8f5ba8b35d02d48bf94c9f1724ebe31c943 WrappingPubkey: tlpub:44a0e23cd53a4b8acc02f6732813d8f5ba8b35d02d48bf94c9f1724ebe31c943 This node's tailnet-lock key: tlpub:44a0e23cd53a4b8acc02f6732813d8f5ba8b35d02d48bf94c9f1724ebe31c943 Trusted signing keys: tlpub:44a0e23cd53a4b8acc02f6732813d8f5ba8b35d02d48bf94c9f1724ebe31c943 1 (self) tlpub:6fa21d242a202b290de85926ba3893a6861888679a73bc3a43f49539d67c9764 1 (pre-auth key kq3NzejWoS11KTM59) ``` For a node created via a signed auth key: ``` This node is accessible under tailnet lock. Node signature: SigKind: rotation Pubkey: [e3nAO] Nested: SigKind: credential KeyID: tlpub:6fa21d242a202b290de85926ba3893a6861888679a73bc3a43f49539d67c9764 WrappingPubkey: tlpub:3623b0412cab0029cb1918806435709b5947ae03554050f20caf66629f21220a ``` For a node that rotated its key a few times: ``` This node is accessible under tailnet lock. Node signature: SigKind: rotation Pubkey: [DOzL4] Nested: SigKind: rotation Pubkey: [S/9yU] Nested: SigKind: rotation Pubkey: [9E9v4] Nested: SigKind: direct Pubkey: [3QHTJ] KeyID: tlpub:44a0e23cd53a4b8acc02f6732813d8f5ba8b35d02d48bf94c9f1724ebe31c943 WrappingPubkey: tlpub:2faa280025d3aba0884615f710d8c50590b052c01a004c2b4c2c9434702ae9d0 ``` Updates tailscale/corp#19764 Signed-off-by: Anton Tolchanov <anton@tailscale.com>	6 months ago
Brad Fitzpatrick	1ea100e2e5	cmd/tailscaled, ipn/conffile: support ec2 user-data config file Updates #1412 Updates #1866 Change-Id: I4d08fb233b80c2078b3b28ffc18559baabb4a081 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	6 months ago
signed-long	5ad0dad15e	go generate directives reorder for 'make kube-generate-all' (#12210 ) Fixes #11980 Signed-off-by: Michael Long <michaelongdev@gmail.com>	6 months ago
Irbe Krumina	d0d33f257f	cmd/k8s-operator: add a note pointing at ProxyClass (#12246 ) Updates tailscale/tailscale#12242 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	6 months ago
Maisem Ali	9a64c06a20	all: do not depend on the testing package Discovered while looking for something else. Updates tailscale/corp#18935 Signed-off-by: Maisem Ali <maisem@tailscale.com>	6 months ago
Brad Fitzpatrick	3c9be07214	cmd/derper: support TXT-mediated unpublished bootstrap DNS rollouts Updates tailscale/coral#127 Change-Id: I2712c50630d0d1272c30305fa5a1899a19ffacef Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	6 months ago
Irbe Krumina	72f0f53ed0	cmd/k8s-operator: fix typo (#12217 ) Fixes#cleanup Signed-off-by: Irbe Krumina <irbe@tailscale.com>	6 months ago
James Tucker	9351eec3e1	net/netcheck: remove hairpin probes Palo Alto reported interpreting hairpin probes as LAND attacks, and the firewalls may be responding to this by shutting down otherwise in use NAT sessions prematurely. We don't currently make use of the outcome of the hairpin probes, and they contribute to other user confusion with e.g. the AirPort Extreme hairpin session workaround. We decided in response to remove the whole probe feature as a result. Updates #188 Updates tailscale/corp#19106 Updates tailscale/corp#19116 Signed-off-by: James Tucker <james@tailscale.com>	6 months ago
Andrew Lytvynov	c9179bc261	various: disable stateful filtering by default (#12197 ) After some analysis, stateful filtering is only necessary in tailnets that use `autogroup:danger-all` in `src` in ACLs. And in those cases users explicitly specify that hosts outside of the tailnet should be able to reach their nodes. To fix local DNS breakage in containers, we disable stateful filtering by default. Updates #12108 Signed-off-by: Andrew Lytvynov <awly@tailscale.com>	6 months ago
Brad Fitzpatrick	964282d34f	ipn,wgengine: remove vestigial Prefs.AllowSingleHosts It was requested by the first customer 4-5 years ago and only used for a brief moment of time. We later added netmap visibility trimming which removes the need for this. It's been hidden by the CLI for quite some time and never documented anywhere else. This keeps the CLI flag, though, out of caution. It just returns an error if it's set to anything but true (its default). Fixes #12058 Change-Id: I7514ba572e7b82519b04ed603ff9f3bdbaecfda7 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	6 months ago
Jordan Whited	adb7a86559	cmd/stunc: support ipv6 address targets (#12166 ) Updates #cleanup Signed-off-by: Jordan Whited <jordan@tailscale.com>	6 months ago
James Tucker	8d1249550a	net/netcheck,wgengine/magicsock: add potential workaround for Palo Alto DIPP misbehavior Palo Alto firewalls have a typically hard NAT, but also have a mode called Persistent DIPP that is supposed to provide consistent port mapping suitable for STUN resolution of public ports. Persistent DIPP works initially on most Palo Alto firewalls, but some models/software versions have a bug which this works around. The bug symptom presents as follows: - STUN sessions resolve a consistent public IP:port to start with - Much later netchecks report the same IP:Port for a subset of sessions, most often the users active DERP, and/or the port related to sustained traffic. - The broader set of DERPs in a full netcheck will now consistently observe a new IP:Port. - After this point of observation, new inbound connections will only succeed to the new IP:Port observed, and existing/old sessions will only work to the old binding. In this patch we now advertise the lowest latency global endpoint discovered as we always have, but in addition any global endpoints that are observed more than once in a single netcheck report. This should provide viable endpoints for potential connection establishment across a NAT with this behavior. Updates tailscale/corp#19106 Signed-off-by: James Tucker <james@tailscale.com>	6 months ago
Andrea Gottardo	e5f67f90a2	xcode: allow ICMP ping relay on macOS + iOS platforms (#12048 ) Fixes tailscale/tailscale#10393 Fixes tailscale/corp#15412 Fixes tailscale/corp#19808 On Apple platforms, exit nodes and subnet routers have been unable to relay pings from Tailscale devices to non-Tailscale devices due to sandbox restrictions imposed on our network extensions by Apple. The sandbox prevented the code in netstack.go from spawning the `ping` process which we were using. Replace that exec call with logic to send an ICMP echo request directly, which appears to work in userspace, and not trigger a sandbox violation in the syslog. Signed-off-by: Andrea Gottardo <andrea@gottardo.me>	6 months ago
Irbe Krumina	76c30e014d	cmd/containerboot: warn when an ingress proxy with an IPv4 tailnet address is being created for an IPv6 backend(s) (#12159 ) Updates tailscale/tailscale#12156 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	6 months ago
Maisem Ali	486a423716	tsnet: split user facing and backend logging This adds a new `UserLogf` field to the `Server` struct. When set this any logs generated by Server are logged using `UserLogf` and all spammy backend logs are logged to `Logf`. If it `UserLogf` is unset, we default to `log.Printf` and if `Logf` is unset we discard all the spammy logs. Fixes #12094 Signed-off-by: Maisem Ali <maisem@tailscale.com>	7 months ago
Irbe Krumina	d86d1e7601	cmd/k8s-operator,cmd/containerboot,ipn,k8s-operator: turn off stateful filter for egress proxies. (#12075 ) Turn off stateful filtering for egress proxies to allow cluster traffic to be forwarded to tailnet. Allow configuring stateful filter via tailscaled config file. Deprecate EXPERIMENTAL_TS_CONFIGFILE_PATH env var and introduce a new TS_EXPERIMENTAL_VERSIONED_CONFIG env var that can be used to provide containerboot a directory that should contain one or more tailscaled config files named cap-<tailscaled-cap-version>.hujson. Containerboot will pick the one with the newest capability version that is not newer than its current capability version. Proxies with this change will not work with older Tailscale Kubernetes operator versions - users must ensure that the deployed operator is at the same version or newer (up to 4 version skew) than the proxies. Updates tailscale/tailscale#12061 Signed-off-by: Irbe Krumina <irbe@tailscale.com> Co-authored-by: Maisem Ali <maisem@tailscale.com>	7 months ago
Maisem Ali	21abb7f402	cmd/tailscale: add missing set flags for linux We were missing `snat-subnet-routes`, `stateful-filtering` and `netfilter-mode`. Add those to set too. Fixes #12061 Signed-off-by: Maisem Ali <maisem@tailscale.com>	7 months ago
Irbe Krumina	b5dbf155b1	cmd/k8s-operator: default nameserver image to tailscale/k8s-nameserver:unstable (#11991 ) We are now publishing nameserver images to tailscale/k8s-nameserver, so we can start defaulting the images if users haven't set them explicitly, same as we already do with proxy images. The nameserver images are currently only published for unstable track, so we have to use the static 'unstable' tag. Once we start publishing to stable, we can make the operator default to its own tag (because then we'll know that for each operator tag X there is also a nameserver tag X as we always cut all images for a given tag. Updates tailscale/tailscale#10499 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	7 months ago
Brad Fitzpatrick	e968b0ecd7	cmd/tailscale,controlclient,ipnlocal: fix 'up', deflake tests more The CLI's "up" is kinda chaotic and LocalBackend.Start is kinda chaotic and they both need to be redone/deleted (respectively), but this fixes some buggy behavior meanwhile. We were previously calling StartLoginInteractive (to start the controlclient's RegisterRequest) redundantly in some cases, causing test flakes depending on timing and up's weird state machine. We only need to call StartLoginInteractive in the client if Start itself doesn't. But Start doesn't tell us that. So cheat a bit and a put the information about whether there's a current NodeKey in the ipn.Status. It used to be accessible over LocalAPI via GetPrefs as a private key but we removed that for security. But a bool is fine. So then only call StartLoginInteractive if that bool is false and don't do it in the WatchIPNBus loop. Fixes #12028 Updates #12042 Change-Id: I0923c3f704a9d6afd825a858eb9a63ca7c1df294 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	7 months ago
Brad Fitzpatrick	727c0d6cfd	ipn/ipnserver: close a small race in ipnserver, ~simplify code There was a small window in ipnserver after we assigned a LocalBackend to the ipnserver's atomic but before we Start'ed it where our initalization Start could conflict with API calls from the LocalAPI. Simplify that a bit and lay out the rules in the docs. Updates #12028 Change-Id: Ic5f5e4861e26340599184e20e308e709edec68b1 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	7 months ago
Andrew Lytvynov	471731771c	ipn/ipnlocal: set default NoStatefulFiltering in ipn.NewPrefs (#12031 ) This way the default gets populated on first start, when no existing state exists to migrate. Also fix `ipn.PrefsFromBytes` to preserve empty fields, rather than layering `NewPrefs` values on top. Updates https://github.com/tailscale/corp/issues/19623 Signed-off-by: Andrew Lytvynov <awly@tailscale.com>	7 months ago
Paul Scott	78fa698fe6	cmd/tailscale/cli/ffcomplete: remove fullstop from ShortHelp Updates #cleanup Signed-off-by: Paul Scott <paul@tailscale.com>	7 months ago
Andrew Lytvynov	c28f5767bf	various: implement stateful firewalling on Linux (#12025 ) Updates https://github.com/tailscale/corp/issues/19623 Change-Id: I7980e1fb736e234e66fa000d488066466c96ec85 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Co-authored-by: Andrew Dunham <andrew@du.nham.ca>	7 months ago
Brad Fitzpatrick	f3d2fd22ef	cmd/tailscale/cli: don't start WatchIPNBus until after up's initial Start The CLI "up" command is a historical mess, both on the CLI side and the LocalBackend side. We're getting closer to cleaning it up, but in the meantime it was again implicated in flaky tests. In this case, the background goroutine running WatchIPNBus was very occasionally running enough to get to its StartLoginInteractive call before the original goroutine did its Start call. That meant integration tests were very rarely but sometimes logging in with the default control plane URL out on the internet (controlplane.tailscale.com) instead of the localhost control server for tests. This also might've affected new Headscale etc users on initial "up". Fixes #11960 Fixes #11962 Change-Id: I36f8817b69267a99271b5ee78cb7dbf0fcc0bd34 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	7 months ago
Nick Khyl	caa3d7594f	ipn/ipnlocal, net/tsdial: plumb routes into tsdial and use them in UserDial We'd like to use tsdial.Dialer.UserDial instead of SystemDial for DNS over TCP. This is primarily necessary to properly dial internal DNS servers accessible over Tailscale and subnet routes. However, to avoid issues when switching between Wi-Fi and cellular, we need to ensure that we don't retain connections to any external addresses on the old interface. Therefore, we need to determine which dialer to use internally based on the configured routes. This plumbs routes and localRoutes from router.Config to tsdial.Dialer, and updates UserDial to use either the peer dialer or the system dialer, depending on the network address and the configured routes. Updates tailscale/corp#18725 Fixes #4529 Signed-off-by: Nick Khyl <nickk@tailscale.com>	7 months ago
Brad Fitzpatrick	c3c18027c6	all: make more tests pass/skip in airplane mode Updates tailscale/corp#19786 Change-Id: Iedc6730fe91c627b556bff5325bdbaf7bf79d8e6 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	7 months ago
Irbe Krumina	406293682c	cmd/k8s-operator: cleanup runReconciler signature (#11993 ) Updates#cleanup Signed-off-by: Irbe Krumina <irbe@tailscale.com>	7 months ago
Brad Fitzpatrick	15fc6cd966	derp/derphttp: fix netcheck HTTPS probes The netcheck client, when no UDP is available, probes distance using HTTPS. Several problems: * It probes using /derp/latency-check. * But cmd/derper serves the handler at /derp/probe * Despite the difference, it work by accident until `c8f4dfc8c0` which made netcheck's probe require a 2xx status code. * in tests, we only use derphttp.Handler, so the cmd/derper-installed mux routes aren't preesnt, so there's no probe. That breaks tests in airplane mode. netcheck.Client then reports "unexpected HTTP status 426" (Upgrade Required) This makes derp handle both /derp/probe and /derp/latency-check equivalently, and in both cmd/derper and derphttp.Handler standalone modes. I notice this when wgengine/magicsock TestActiveDiscovery was failing in airplane mode (no wifi). It still doesn't pass, but it gets further. Fixes #11989 Change-Id: I45213d4bd137e0f29aac8bd4a9ac92091065113f	7 months ago
Brad Fitzpatrick	1fe0983f2d	cmd/derper,tstest/nettest: skip network-needing test in airplane mode Not buying wifi on a short flight is a good way to find tests that require network. Whoops. Updates #cleanup Change-Id: Ibe678e9c755d27269ad7206413ffe9971f07d298 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	7 months ago
Irbe Krumina	cd633a7252	cmd/k8s-operator/deploy,k8s-operator: document that metrics are unstable (#11979 ) Updates#11292 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	7 months ago
Irbe Krumina	19b31ac9a6	cmd/{k8s-operator,k8s-nameserver},k8s-operator: update nameserver config with records for ingress/egress proxies (#11019 ) cmd/k8s-operator: optionally update dnsrecords Configmap with DNS records for proxies. This commit adds functionality to automatically populate DNS records for the in-cluster ts.net nameserver to allow cluster workloads to resolve MagicDNS names associated with operator's proxies. The records are created as follows: * For tailscale Ingress proxies there will be a record mapping the MagicDNS name of the Ingress device and each proxy Pod's IP address. * For cluster egress proxies, configured via tailscale.com/tailnet-fqdn annotation, there will be a record for each proxy Pod, mapping the MagicDNS name of the exposed tailnet workload to the proxy Pod's IP. No records will be created for any other proxy types. Records will only be created if users have configured the operator to deploy an in-cluster ts.net nameserver by applying tailscale.com/v1alpha1.DNSConfig. It is user's responsibility to add the ts.net nameserver as a stub nameserver for ts.net DNS names. https://kubernetes.io/docs/tasks/administer-cluster/dns-custom-nameservers/#configuration-of-stub-domain-and-upstream-nameserver-using-coredns https://cloud.google.com/kubernetes-engine/docs/how-to/kube-dns#upstream_nameservers See also https://github.com/tailscale/tailscale/pull/11017 Updates tailscale/tailscale#10499 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	7 months ago
Paul Scott	4c08410011	cmd/tailscale/cli: set localClient.UseSocketOnly during flag parsing This configures localClient correctly during flag parsing, so that the --socket option is effective when generating tab-completion results. For example, the following would not connect to the system Tailscale for tab-completion results: tailscale --socket=/tmp/tailscaled.socket switch <TAB> Updates #3793 Signed-off-by: Paul Scott <paul@tailscale.com>	7 months ago
Paul Scott	ba34943133	cmd/tailscale/cli/ffcomplete: omit and clean completion results Updates #3793 Signed-off-by: Paul Scott <paul@tailscale.com>	7 months ago
Gabe Gorelick	de85610be0	cmd/k8s-operator/deploy/chart: allow users to configure additional labels for the operator's Pod via Helm chart values. cmd/k8s-operator/deploy/chart: allow users to configure additional labels for the operator's Pod via Helm chart values. Fixes #11947 Signed-off-by: Gabe Gorelick <gabe@hightouch.io>	7 months ago
Irbe Krumina	44aa809cb0	cmd/{k8s-nameserver,k8s-operator},k8s-operator: add a kube nameserver, make operator deploy it (#11919 ) * cmd/k8s-nameserver,k8s-operator: add a nameserver that can resolve ts.net DNS names in cluster. Adds a simple nameserver that can respond to A record queries for ts.net DNS names. It can respond to queries from in-memory records, populated from a ConfigMap mounted at /config. It dynamically updates its records as the ConfigMap contents changes. It will respond with NXDOMAIN to queries for any other record types (AAAA to be implemented in the future). It can respond to queries over UDP or TCP. It runs a miekg/dns DNS server with a single registered handler for ts.net domain names. Queries for other domain names will be refused. The intended use of this is: 1) to allow non-tailnet cluster workloads to talk to HTTPS tailnet services exposed via Tailscale operator egress over HTTPS 2) to allow non-tailnet cluster workloads to talk to workloads in the same cluster that have been exposed to tailnet over their MagicDNS names but on their cluster IPs. DNSConfig CRD can be used to configure the operator to deploy kube nameserver (./cmd/k8s-nameserver) to cluster. Updates tailscale/tailscale#10499 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	7 months ago
Irbe Krumina	7d9c3f9897	cmd/k8s-operator/deploy/manifests: check if IPv6 module is loaded before using it (#11867 ) Before attempting to enable IPv6 forwarding in the proxy init container check if the relevant module is found, else the container crashes on hosts that don't have it. Updates#11860 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	7 months ago
Andrew Lytvynov	ce5c80d0fe	clientupdate: exec systemctl instead of using dbus to restart (#11923 ) Shell out to "systemctl", which lets us drop an extra dependency. Updates https://github.com/tailscale/corp/issues/18935 Signed-off-by: Andrew Lytvynov <awly@tailscale.com>	7 months ago
Irbe Krumina	1452faf510	cmd/containerboot,kube,ipn/store/kubestore: allow interactive login on kube, check Secret create perms, allow empty state Secret (#11326 ) cmd/containerboot,kube,ipn/store/kubestore: allow interactive login and empty state Secrets, check perms * Allow users to pre-create empty state Secrets * Add a fake internal kube client, test functionality that has dependencies on kube client operations. * Fix an issue where interactive login was not allowed in an edge case where state Secret does not exist * Make the CheckSecretPermissions method report whether we have permissions to create/patch a Secret if it's determined that these operations will be needed Updates tailscale/tailscale#11170 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	7 months ago
Brad Fitzpatrick	b9adbe2002	net/{interfaces,netmon}, all: merge net/interfaces package into net/netmon In prep for most of the package funcs in net/interfaces to become methods in a long-lived netmon.Monitor that can cache things. (Many of the funcs are very heavy to call regularly, whereas the long-lived netmon.Monitor can subscribe to things from the OS and remember answers to questions it's asked regularly later) Updates tailscale/corp#10910 Updates tailscale/corp#18960 Updates #7967 Updates #3299 Change-Id: Ie4e8dedb70136af2d611b990b865a822cd1797e5 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	7 months ago
Brad Fitzpatrick	6b95219e3a	net/netmon, add: add netmon.State type alias of interfaces.State ... in prep for merging the net/interfaces package into net/netmon. This is a no-op change that updates a bunch of the API signatures ahead of a future change to actually move things (and remove the type alias) Updates tailscale/corp#10910 Updates tailscale/corp#18960 Updates #7967 Updates #3299 Change-Id: I477613388f09389214db0d77ccf24a65bff2199c Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	7 months ago
Irbe Krumina	45f0721530	cmd/containerboot: wait on tailscaled process only (#11897 ) Modifies containerboot to wait on tailscaled process only, not on any child process of containerboot. Waiting on any subprocess was racing with Go's exec.Cmd.Run, used to run iptables commands and that starts its own subprocesses and waits on them. Containerboot itself does not run anything else except for tailscaled, so there shouldn't be a need to wait on anything else. Updates tailscale/tailscale#11593 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	7 months ago
Brad Fitzpatrick	3672f29a4e	net/netns, net/dns/resolver, etc: make netmon required in most places The goal is to move more network state accessors to netmon.Monitor where they can be cheaper/cached. But first (this change and others) we need to make sure the one netmon.Monitor is plumbed everywhere. Some notable bits: * tsdial.NewDialer is added, taking a now-required netmon * because a tsdial.Dialer always has a netmon, anything taking both a Dialer and a NetMon is now redundant; take only the Dialer and get the NetMon from that if/when needed. * netmon.NewStatic is added, primarily for tests Updates tailscale/corp#10910 Updates tailscale/corp#18960 Updates #7967 Updates #3299 Change-Id: I877f9cb87618c4eb037cee098241d18da9c01691 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	7 months ago
Brad Fitzpatrick	7a62dddeac	net/netcheck, wgengine/magicsock: make netmon.Monitor required This has been a TODO for ages. Time to do it. The goal is to move more network state accessors to netmon.Monitor where they can be cheaper/cached. Updates tailscale/corp#10910 Updates tailscale/corp#18960 Updates #7967 Updates #3299 Change-Id: I60fc6508cd2d8d079260bda371fc08b6318bcaf1 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	7 months ago
Brad Fitzpatrick	745931415c	health, all: remove health.Global, finish plumbing health.Tracker Updates #11874 Updates #4136 Change-Id: I414470f71d90be9889d44c3afd53956d9f26cd61 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	7 months ago
Brad Fitzpatrick	6d69fc137f	ipn/{ipnlocal,localapi},wgengine{,/magicsock}: plumb health.Tracker Down to 25 health.Global users. After this remains controlclient & net/dns & wgengine/router. Updates #11874 Updates #4136 Change-Id: I6dd1856e3d9bf523bdd44b60fb3b8f7501d5dc0d Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	7 months ago
Irbe Krumina	df8f40905b	cmd/k8s-operator,k8s-operator: optionally serve tailscaled metrics on Pod IP (#11699 ) Adds a new .spec.metrics field to ProxyClass to allow users to optionally serve client metrics (tailscaled --debug) on <Pod-IP>:9001. Metrics cannot currently be enabled for proxies that egress traffic to tailnet and for Ingress proxies with tailscale.com/experimental-forward-cluster-traffic-via-ingress annotation (because they currently forward all cluster traffic to their respective backends). The assumption is that users will want to have these metrics enabled continuously to be able to monitor proxy behaviour (as opposed to enabling them temporarily for debugging). Hence we expose them on Pod IP to make it easier to consume them i.e via Prometheus PodMonitor. Updates tailscale/tailscale#11292 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	7 months ago
Brad Fitzpatrick	723c775dbb	tsd, ipnlocal, etc: add tsd.System.HealthTracker, start some plumbing This adds a health.Tracker to tsd.System, accessible via a new tsd.System.HealthTracker method. In the future, that new method will return a tsd.System-specific HealthTracker, so multiple tsnet.Servers in the same process are isolated. For now, though, it just always returns the temporary health.Global value. That permits incremental plumbing over a number of changes. When the second to last health.Global reference is gone, then the tsd.System.HealthTracker implementation can return a private Tracker. The primary plumbing this does is adding it to LocalBackend and its dozen and change health calls. A few misc other callers are also plumbed. Subsequent changes will flesh out other parts of the tree (magicsock, controlclient, etc). Updates #11874 Updates #4136 Change-Id: Id51e73cfc8a39110425b6dc19d18b3975eac75ce Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	7 months ago
Lee Briggs	14ac41febc	cmd/k8s-operator,k8s-operator: proxyclass affinity (#11862 ) add ability to set affinity rules to proxyclass Updates#11861 Signed-off-by: Lee Briggs <lee@leebriggs.co.uk>	7 months ago
Irbe Krumina	3af0f526b8	cmd{containerboot,k8s-operator},util/linuxfw: support ExternalName Services (#11802 ) * cmd/containerboot,util/linuxfw: support proxy backends specified by DNS name Adds support for optionally configuring containerboot to proxy traffic to backends configured by passing TS_EXPERIMENTAL_DEST_DNS_NAME env var to containerboot. Containerboot will periodically (every 10 minutes) attempt to resolve the DNS name and ensure that all traffic sent to the node's tailnet IP gets forwarded to the resolved backend IP addresses. Currently: - if the firewall mode is iptables, traffic will be load balanced accross the backend IP addresses using round robin. There are no health checks for whether the IPs are reachable. - if the firewall mode is nftables traffic will only be forwarded to the first IP address in the list. This is to be improved. * cmd/k8s-operator: support ExternalName Services Adds support for exposing endpoints, accessible from within a cluster to the tailnet via DNS names using ExternalName Services. This can be done by annotating the ExternalName Service with tailscale.com/expose: "true" annotation. The operator will deploy a proxy configured to route tailnet traffic to the backend IPs that service.spec.externalName resolves to. The backend IPs must be reachable from the operator's namespace. Updates tailscale/tailscale#10606 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	7 months ago
Joe Tsai	63b3c82587	ipn/local: log OS-specific diagnostic information as JSON (#11700 ) There is an undocumented 16KiB limit for text log messages. However, the limit for JSON messages is 256KiB. Even worse, logging JSON as text results in significant overhead since each double quote needs to be escaped. Instead, use logger.Logf.JSON to explicitly log the info as JSON. We also modify osdiag to return the information as structured data rather than implicitly have the package log on our behalf. This gives more control to the caller on how to log. Updates #7802 Signed-off-by: Joe Tsai <joetsai@digital-static.net>	7 months ago
Sonia Appasamy	0a84215036	release/dist/qnap: add qnap target builder Creates new QNAP builder target, which builds go binaries then uses docker to build into QNAP packages. Much of the docker/script code here is pulled over from https://github.com/tailscale/tailscale-qpkg, with adaptation into our builder structures. The qnap/Tailscale folder contains static resources needed to build Tailscale qpkg packages, and is an exact copy of the existing folder in the tailscale-qpkg repo. Builds can be run with: ``` sudo ./tool/go run ./cmd/dist build qnap ``` Updates tailscale/tailscale-qpkg#135 Signed-off-by: Sonia Appasamy <sonia@tailscale.com>	7 months ago
Irbe Krumina	bbe194c80d	cmd/k8s-operator: correctly determine cluster domain (#11512 ) Kubernetes cluster domain defaults to 'cluster.local', but can also be customized. We need to determine cluster domain to set up in-cluster forwarding to our egress proxies. This was previously hardcoded to 'cluster.local', so was the egress proxies were not usable in clusters with custom domains. This PR ensures that we attempt to determine the cluster domain by parsing /etc/resolv.conf. In case the cluster domain cannot be determined from /etc/resolv.conf, we fall back to 'cluster.local'. Updates tailscale/tailscale#10399,tailscale/tailscale#11445 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	7 months ago
Aaron Klotz	7132b782d4	hostinfo: use Distro field for distinguishing Windows Server builds Some editions of Windows server share the same build number as their client counterpart; we must use an additional field found in the OS version information to distinguish between them. Even though "Distro" has Linux connotations, it is the most appropriate hostinfo field. What is Windows Server if not an alternate distribution of Windows? This PR populates Distro with "Server" when applicable. Fixes #11785 Signed-off-by: Aaron Klotz <aaron@tailscale.com>	7 months ago

1 2 3 4 5 ...

1896 Commits (6798f8ea88343563f7e9fe67357b6d933f86382e)