tailscale

Commit Graph

Author	SHA1	Message	Date
Val	67926ede39	wgengine/magicsock: add MTU to addrLatency and rename to addrQuality Add a field to record the wire MTU of the path to this address to the addrLatency struct and rename it addrQuality. Updates #311 Signed-off-by: Val <valerie@tailscale.com>	1 year ago
Brad Fitzpatrick	425cf9aa9d	tailcfg, all: use []netip.AddrPort instead of []string for Endpoints It's JSON wire compatible. Updates #cleanup Change-Id: Ifa5c17768fec35b305b06d75eb5f0611c8a135a6 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Jordan Whited	16fa3c24ea	wgengine/magicsock: use x/sys/unix constants for UDP GSO (#9597 ) Updates #cleanup Signed-off-by: Jordan Whited <jordan@tailscale.com>	1 year ago
James Tucker	80206b5323	wgengine/magicsock: add nodeid to panic condition on public key reuse If the condition arises, it should be easy to track down. Updates #9547 Signed-off-by: James Tucker <james@tailscale.com>	1 year ago
Val	c608660d12	wgengine,net,ipn,disco: split up and define different types of MTU Prepare for path MTU discovery by splitting up the concept of DefaultMTU() into the concepts of the Tailscale TUN MTU, MTUs of underlying network interfaces, minimum "safe" TUN MTU, user configured TUN MTU, probed path MTU to a peer, and maximum probed MTU. Add a set of likely MTUs to probe. Updates #311 Signed-off-by: Val <valerie@tailscale.com>	1 year ago
Brad Fitzpatrick	3b32d6c679	wgengine/magicsock, controlclient, net/dns: reduce some logspam Updates #cleanup Change-Id: I78b0697a01e94baa33f3de474b591e616fa5e6af Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Val	6cc5b272d8	Revert "wgengine,net,ipn,disco: split up and define different types of MTU" This reverts commit `059051c58a`. Signed-off-by: Val <valerie@tailscale.com>	1 year ago
Val	059051c58a	wgengine,net,ipn,disco: split up and define different types of MTU Prepare for path MTU discovery by splitting up the concept of DefaultMTU() into the concepts of the Tailscale TUN MTU, MTUs of underlying network interfaces, minimum "safe" TUN MTU, user configured TUN MTU, probed path MTU to a peer, and maximum probed MTU. Add a set of likely MTUs to probe. Updates #311 Signed-off-by: Val <valerie@tailscale.com>	1 year ago
Val	65dc711c76	control,tailcfg,wgengine/magicsock: add nodeAttr to enable/disable peer MTU Add a nodeAttr to enable/disable peer path MTU discovery. Updates #311 Signed-off-by: Val <valerie@tailscale.com>	1 year ago
Val	95635857dc	wgengine/magicsock: replace CanPMTUD() with ShouldPMTUD() Replace CanPMTUD() with ShouldPMTUD() to check if peer path MTU discovery should be enabled, in preparation for adding support for enabling/disabling peer MTU dynamically. Updated #311 Signed-off-by: Val <valerie@tailscale.com>	1 year ago
Val	a5ae21a832	wgengine/magicsock: improve don't fragment bit set/get support Add an enable/disable argument to setDontFragment() in preparation for dynamic enable/disable of peer path MTU discovery. Add getDontFragment() to get the status of the don't fragment bit from a socket. Updates #311 Co-authored-by: James Tucker <james@tailscale.com> Signed-off-by: Val <valerie@tailscale.com>	1 year ago
Val	4c793014af	wgengine/magicsock: fix don't fragment setsockopt arg for IPv6 on linux Use IPV6_MTU_DISCOVER for setting don't fragment on IPv6 sockets on Linux (was using IP_MTU_DISCOVER, the IPv4 arg). Updates #311 Signed-off-by: Val <valerie@tailscale.com>	1 year ago
Val	055f3fd843	wgengine/magicsock: rename debugPMTUD() to debugEnablePMTUD() Make the debugknob variable name for enabling peer path MTU discovery match the env variable name. Updates #311 Signed-off-by: Val <valerie@tailscale.com>	1 year ago
Val	bb3d338334	wgengine/magicsock: rename files for peer MTU Rename dontfrag* to peermtu* to prepare for more peer MTU related code going into these files. Updates #311 Signed-off-by: Val <valerie@tailscale.com>	1 year ago
Brad Fitzpatrick	0d991249e1	types/netmap: remove NetworkMap.{Addresses,MachineStatus} And convert all callers over to the methods that check SelfNode. Now we don't have multiple ways to express things in tests (setting fields on SelfNode vs NetworkMap, sometimes inconsistently) and don't have multiple ways to check those two fields (often only checking one or the other). Updates #9443 Change-Id: I2d7ba1cf6556142d219fae2be6f484f528756e3c Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Brad Fitzpatrick	926c990a09	types/netmap: start phasing out Addresses, add GetAddresses method NetworkMap.Addresses is redundant with the SelfNode.Addresses. This works towards a TODO to delete NetworkMap.Addresses and replace it with a method. This is similar to #9389. Updates #cleanup Change-Id: Id000509ca5d16bb636401763d41bdb5f38513ba0 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Brad Fitzpatrick	727b1432a8	wgengine: remove SetNetInfoCallback method from Engine LocalBackend can talk to magicsock on its own to do this without the "Engine" being involved. (Continuing a little side quest of cleaning up the Engine interface...) Updates #cleanup Change-Id: I8654acdca2b883b1bd557fdc0cfb90cd3a418a62 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Brad Fitzpatrick	3af051ea27	control/controlclient, types/netmap: start plumbing delta netmap updates Currently only the top four most popular changes: endpoints, DERP home, online, and LastSeen. Updates #1909 Change-Id: I03152da176b2b95232b56acabfb55dcdfaa16b79 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Brad Fitzpatrick	ff6fadddb6	wgengine/magicsock: stop retaining *netmap.NetworkMap We're trying to start using that monster type less and eventually get rid of it. Updates #1909 Change-Id: I8e1e725bce5324fb820a9be6c7952767863e6542 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Brad Fitzpatrick	42072683d6	control/controlknobs: move ForceBackgroundSTUN to controlknobs.Knobs This is both more efficient (because the knobs' bool is only updated whenever Node is changed, rarely) and also gets us one step closer to removing a case of storing a netmap.NetworkMap in magicsock. (eventually we want to phase out much of the use of that type internally) Updates #1909 Change-Id: I37e81789f94133175064fdc09984e4f3a431f1a1 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Brad Fitzpatrick	4e91cf20a8	control/controlknobs, all: add plumbed Knobs type, not global variables Previously two tsnet nodes in the same process couldn't have disjoint sets of controlknob settings from control as both would overwrite each other's global variables. This plumbs a new controlknobs.Knobs type around everywhere and hangs the knobs sent by control on that instead. Updates #9351 Change-Id: I75338646d36813ed971b4ffad6f9a8b41ec91560 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Brad Fitzpatrick	d050700a3b	wgengine/magicsock: make peerMap also keyed by NodeID In prep for incremental netmap update plumbing (#1909), make peerMap also keyed by NodeID, as all the netmap node mutations passed around later will be keyed by NodeID. In the process, also: * add envknob.InDevMode, as a signal that we can panic more aggressively in unexpected cases. * pull two moderately large blocks of code in Conn.SetNetworkMap out into their own methods * convert a few more sets from maps to set.Set Updates #1909 Change-Id: I7acdd64452ba58e9d554140ee7a8760f9043f961 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Brad Fitzpatrick	dc7aa98b76	all: use set.Set consistently instead of map[T]struct{} I didn't clean up the more idiomatic map[T]bool with true values, at least yet. I just converted the relatively awkward struct{}-valued maps. Updates #cleanup Change-Id: I758abebd2bb1f64bc7a9d0f25c32298f4679c14f Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Craig Rodrigues	8683ce78c2	client/web, clientupdate, util/linuxfw, wgengine/magicsock: Use %v verb for errors Replace %w verb with %v verb when logging errors. Use %w only for wrapping errors with fmt.Errorf() Fixes: #9213 Signed-off-by: Craig Rodrigues <rodrigc@crodrigues.org>	1 year ago
Brad Fitzpatrick	98a5116434	all: adjust some build tags for plan9 I'm not saying it works, but it compiles. Updates #5794 Change-Id: I2f3c99732e67fe57a05edb25b758d083417f083e Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Brad Fitzpatrick	ea4425d8a9	ipn/ipnlocal, wgengine/magicsock: move UpdateStatus stuff around Upcoming work on incremental netmap change handling will require some replumbing of which subsystems get notified about what. Done naively, it could break "tailscale status --json" visibility later. To make sure I understood the flow of all the updates I was rereading the status code and realized parts of ipnstate.Status were being populated by the wrong subsystems. The engine (wireguard) and magicsock (data plane, NAT traveral) should only populate the stuff that they uniquely know. The WireGuard bits were fine but magicsock was populating stuff stuff that LocalBackend could've better handled, so move it there. Updates #1909 Change-Id: I6d1b95d19a2d1b70fbb3c875fac8ea1e169e8cb0 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
James Tucker	e1c7e9b736	wgengine/magicsock: improve endpoint selection for WireGuard peers with rx time If we don't have the ICMP hint available, such as on Android, we can use the signal of rx traffic to bias toward a particular endpoint. We don't want to stick to a particular endpoint for a very long time without any signals, so the sticky time is reduced to 1 second, which is large enough to avoid excessive packet reordering in the common case, but should be small enough that either rx provides a strong signal, or we rotate in a user-interactive schedule to another endpoint, improving the feel of failover to other endpoints. Updates #8999 Co-authored-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com> Signed-off-by: James Tucker <james@tailscale.com> Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>	1 year ago
James Tucker	5edb39d032	wgengine/magicsock: clear out endpoint statistics when it becomes bad There are cases where we do not detect the non-viability of a route, but we will instead observe a failure to send. In a Disco path this would normally be handled as a side effect of Disco, which is not available to non-Disco WireGuard nodes. In both cases, recognizing the failure as such will result in faster convergence. Updates #8999 Signed-off-by: James Tucker <james@tailscale.com>	1 year ago
Charlotte Brandhorst-Satzkorn	7c9c68feed	wgengine/magicsock: update lastfullping comment to include wg only LastFullPing is now used for disco or wireguard only endpoints. This change updates the comment to make that clear. Updates #7826 Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>	1 year ago
James Tucker	3a652d7761	wgengine/magicsock: clear endpoint state in noteConnectivityChange There are latency values stored in bestAddr and endpointState that are no longer applicable after a connectivity change and should be cleared out, following the documented behavior of the function. Updates #8999 Signed-off-by: James Tucker <james@tailscale.com>	1 year ago
Brad Fitzpatrick	84b94b3146	types/netmap, all: make NetworkMap.SelfNode a tailcfg.NodeView Updates #1909 Change-Id: I8c470cbc147129a652c1d58eac9b790691b87606 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Val	c15997511d	wgengine/magicsock: only accept pong sent by CLI ping When sending a ping from the CLI, only accept a pong that is in reply to the specific CLI ping we sent. Updates #311 Signed-off-by: Val <valerie@tailscale.com>	1 year ago
Brad Fitzpatrick	58a4fd43d8	types/netmap, all: use read-only tailcfg.NodeView in NetworkMap Updates #8948 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Brad Fitzpatrick	af2e4909b6	all: remove some Debug fields, NetworkMap.Debug, Reconfig Debug arg Updates #8923 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Brad Fitzpatrick	25663b1307	tailcfg: remove most Debug fields, move bulk to nodeAttrs [capver 70] Now a nodeAttr: ForceBackgroundSTUN, DERPRoute, TrimWGConfig, DisableSubnetsIfPAC, DisableUPnP. Kept support for, but also now a NodeAttr: RandomizeClientPort. Removed: SetForceBackgroundSTUN, SetRandomizeClientPort (both never used, sadly... never got around to them. But nodeAttrs are better anyway), EnableSilentDisco (will be a nodeAttr later when that effort resumes). Updates #8923 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Brad Fitzpatrick	bc0eb6b914	all: import x/exp/maps as xmaps to distinguish from Go 1.21 "maps" Updates #8419 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
KevinLiang10	7ed3681cbe	tailcfg: Add FirewallMode to NetInfo to record wether host using iptables or nftables To record wether user is using iptables or nftables after we add support to nftables on linux, we are adding a field FirewallMode to NetInfo in HostInfo to reflect what firewall mode the host is running, and form metrics. The information is gained from a global constant in hostinfo.go. We set it when selection heuristic made the decision, and magicsock reports this to control. Updates: tailscale/corp#13943 Signed-off-by: KevinLiang10 <kevinliang@tailscale.com>	1 year ago
Andrew Dunham	95d776bd8c	wgengine/magicsock: only cache N most recent endpoints per-Addr If a node is flapping or otherwise generating lots of STUN endpoints, we can end up caching a ton of useless values and sending them to peers. Instead, let's apply a fixed per-Addr limit of endpoints that we cache, so that we're only sending peers up to the N most recent. Updates tailscale/corp#13890 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I8079a05b44220c46da55016c0e5fc96dd2135ef8	1 year ago
James Tucker	de8e55fda6	net/netcheck,wgengine/magicsock: reduce coupling between netcheck and magicsock Netcheck no longer performs I/O itself, instead it makes requests via SendPacket and expects users to route reply traffic to ReceiveSTUNPacket. Netcheck gains a Standalone function that stands up sockets and goroutines to implement I/O when used in a standalone fashion. Magicsock now unconditionally routes STUN traffic to the netcheck.Client that it hosts, and plumbs the send packet sink. The CLI is updated to make use of the Standalone mode. Fixes #8723 Signed-off-by: James Tucker <james@tailscale.com>	1 year ago
Brad Fitzpatrick	92fc9a01fa	cmd/tailscale: add debug commands to break connections For testing reconnects. Updates tailscale/corp#5761 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
salman aljammaz	99e06d3544	magicsock: set the don't fragment sockopt (#8715 ) This sets the Don't Fragment flag, for now behind the TS_DEBUG_ENABLE_PMTUD envknob. Updates #311. Signed-off-by: Val <valerie@tailscale.com> Signed-off-by: salman <salman@tailscale.com>	1 year ago
salman aljammaz	25a7204bb4	wgengine,ipn,cmd/tailscale: add size option to ping (#8739 ) This adds the capability to pad disco ping message payloads to reach a specified size. It also plumbs it through to the tailscale ping -size flag. Disco pings used for actual endpoint discovery do not use this yet. Updates #311. Signed-off-by: salman <salman@tailscale.com> Co-authored-by: Val <valerie@tailscale.com>	1 year ago
salman aljammaz	68f8e5678e	wgengine/magicsock: remove dead code (#8745 ) The nonce value is not read by anything, and di.sharedKey.Seal() a few lines below generates its own. #cleanup Signed-off-by: salman <salman@tailscale.com>	1 year ago
David Anderson	52212f4323	all: update exp/slices and fix call sites slices.SortFunc suffered a late-in-cycle API breakage. Updates #cleanup Signed-off-by: David Anderson <danderson@tailscale.com>	1 year ago
David Anderson	9d89e85db7	wgengine/magicsock: document mysterious-looking assignment Updates #cleanup Signed-off-by: David Anderson <danderson@tailscale.com>	1 year ago
David Anderson	84777354a0	wgengine/magicsock: factor out more separable parts Updates #8720 Signed-off-by: David Anderson <danderson@tailscale.com>	1 year ago
David Anderson	9a76deb4b0	disco: move disco pcap helper to disco package Updates tailscale/corp#13464 Signed-off-by: David Anderson <danderson@tailscale.com>	1 year ago
David Anderson	cde37f5307	wgengine/magicsock: factor out peerMap into separate file Updates tailscale/corp#13464 Signed-off-by: David Anderson <danderson@tailscale.com>	1 year ago
David Anderson	f7016d8c00	wgengine/magicsock: factor out endpoint into its own file Updates tailscale/corp#13464 Signed-off-by: David Anderson <danderson@tailscale.com>	1 year ago
David Anderson	c2831f6614	wgengine/magicsock: delete unused stuff Updates tailscale/corp#13464 Signed-off-by: David Anderson <danderson@tailscale.com>	1 year ago

1 2 3 4 5 ...

644 Commits (67926ede39f0cb740e6fa55ae75bce07cfeb1f1f)