tailscale

Commit Graph

Author	SHA1	Message	Date
Jordan Whited	71acf87830	tstest/integration: add UDP netstack loopback integration test (#13312 ) Updates tailscale/corp#22713 Signed-off-by: Jordan Whited <jordan@tailscale.com>	3 months ago
Jordan Whited	d21ebc28af	wgengine/netstack: implement netstack loopback (#13301 ) When the TS_DEBUG_NETSTACK_LOOPBACK_PORT environment variable is set, netstack will loop back (dnat to addressFamilyLoopback:loopbackPort) TCP & UDP flows originally destined to localServicesIP:loopbackPort. localServicesIP is quad-100 or the IPv6 equivalent. Updates tailscale/corp#22713 Signed-off-by: Jordan Whited <jordan@tailscale.com>	3 months ago
Brad Fitzpatrick	0157000cab	tstest/natlab: fix IPv6 tests, remove TODOs The reason they weren't working was because the cmd/tta agent in the guest was dialing out to the test and the vnet couldn't map its global unicast IPv6 address to a node as it was just using a map[netip.Addr]node and blindly trusting the node was populated. Instead, it was nil, so the agent connection fetching didn't work for its RoundTripper and the test could never drive the node. That map worked for IPv4 but for IPv6 we need to use the method that takes into account the node's IPv6 SLAAC address. Most call sites had been converted but I'd missed that one. Also clean up some debug, and prohibit nodes' link-local unicast addresses from dialing 2000::/3 directly for now. We can allow that to be configured opt-in later (some sort of IPv6 NAT mode. Whatever it's called.) That mode was working on accident, but was confusing: Linux would do source address selection from link local for the first few seconds and then after SLAAC and DAD, switch to using the global unicast source address. Be consistent for now and force it to use the global unicast. Updates #13038 Change-Id: I85e973aaa38b43c14611943ff45c7c825ee9200a Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 months ago
Brad Fitzpatrick	b78df4d48a	tstest/natlab/vnet: add start of IPv6 support Updates #13038 Change-Id: Ic3d095f167daf6c7129463e881b18f2e0d5693f5 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 months ago
Jordan Whited	978306565d	tstest/integration: change log.Fatal() to t.Fatal() (#13253 ) Updates #cleanup Signed-off-by: Jordan Whited <jordan@tailscale.com>	3 months ago
Jordan Whited	367bfa607c	tstest/integration: exercise TCP DNS queries against quad-100 (#13231 ) Updates tailscale/corp#22511 Signed-off-by: Jordan Whited <jordan@tailscale.com>	3 months ago
Brad Fitzpatrick	0ff474ff37	all: fix new lint warnings from bumping staticcheck In prep for updating to new staticcheck required for Go 1.23. Updates #12912 Change-Id: If77892a023b79c6fa798f936fc80428fd4ce0673 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 months ago
Brad Fitzpatrick	02581b1603	gokrazy,tstest/integration/nat: add Gokrazy appliance just for natlab ... rather than abusing the generic tsapp. Per discussion in https://github.com/gokrazy/gokrazy/pull/275 It also means we can remove stuff we don't need, like ntp or randomd. Updates #13038 Change-Id: Iccf579c354bd3b5025d05fa1128e32f1d5bde4e4 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 months ago
Brad Fitzpatrick	b358f489b9	tstest/integration/nat: remove -audio none flag from qemu It's too new to be supported in Debian bookworm so just remove it. It doesn't seem to matter or help speed anything up. Updates #13038 Change-Id: I39077ba8032bebecd75209552b88f1842c843c33 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 months ago
Brad Fitzpatrick	b26c53368d	tstest/integration/nat: make Tailscale status log print less spammy No need to print all the internal fields. We only care about the BackendState. Updates #13038 Change-Id: Iaa0e47ade3c6d30e1887ab1e2a7412ed4e0dab7d	4 months ago
Brad Fitzpatrick	eae6a00651	tstest/integration/nat: crank up verbosity of a failing test Updates #13038 Change-Id: I36cde97b74e4a675b6c0f3be30f817bccdbe8715	4 months ago
Brad Fitzpatrick	84adfa1ba3	tstest/natlab/vnet: standardize on 1-based naming of nodes, networks, MACs We had a mix of 0-based and 1-based nodes and MACs in logs. Updates #13038 Change-Id: I36d1b00f7f94b37b4ae2cd439bcdc5dbee6eda4d Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 months ago
Brad Fitzpatrick	10d0ce8dde	tstest/natlab: get tailscaled logs from gokrazy via syslog Using https://github.com/gokrazy/gokrazy/pull/275 This is much lower latency than logcatcher, which is higher latency and chunkier. And this is better than getting it via 'tailscale debug daemon-logs', which misses early interesting logs. Updates #13038 Change-Id: I499ec254c003a9494c0e9910f9c650c8ac44ef33 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 months ago
Brad Fitzpatrick	10662c4282	tstest/integration/nat: annotate test 'want' values, fail on mismatch Updates #13038 Change-Id: Id711ee19e52a7051a2273c806b184c5571c6e24f Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 months ago
Brad Fitzpatrick	a61825c7b8	cmd/tta, vnet: add host firewall, env var support, more tests In particular, tests showing that #3824 works. But that test doesn't actually work yet; it only gets a DERP connection. (why?) Updates #13038 Change-Id: Ie1fd1b6a38d4e90fae7e72a0b9a142a95f0b2e8f Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 months ago
Brad Fitzpatrick	2e32abc3e2	cmd/tailscaled: allow setting env via linux cmdline for integration tests Updates #13038 Change-Id: I51e016d0eb7c14647159706c08f017fdedd68e2a Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 months ago
Brad Fitzpatrick	2a88428f24	tstest/integration/nat: skip some tests by default without flags Updates #13038 Change-Id: I7ebf8bd8590e65ce4d30dd9f03c713b77868fa36 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 months ago
Brad Fitzpatrick	44d634395b	tstest/natlab/vnet: add easyAF Endpoint-indepedent Mapping with only Address (but not port) dependent filtering. Updates #13038 Change-Id: I1ec88301acafcb79bf878f9600a7286e8af0f173 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 months ago
Maisem Ali	d4cc074187	tstest/natlab/vnet: add pcap support Updates #13038 Change-Id: I89ce2129fee856f97986d6313d2b661c76476c0c Signed-off-by: Maisem Ali <maisem@tailscale.com>	4 months ago
Brad Fitzpatrick	194ff6ee3d	tstest/integration/nat: add sameLAN node type To test local connections. Updates #13038 Change-Id: I575dcab31ca812edf7d04fa126772611cf89b9a7 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 months ago
Brad Fitzpatrick	730fec1cfd	tstest/integration/nat: add start of TestGrid Updates #13038 Change-Id: I41d1c2bf20ae6dfbb071020d9dc2b742e7995835 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 months ago
Brad Fitzpatrick	f47a5fe52b	vnet: reduce some log spam Updates #13038 Change-Id: I76038a90dfde10a82063988a5b54190074d4b5c5 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 months ago
Brad Fitzpatrick	bb3e95c40d	vnet: fix port mapping (w/ maisem + andrew) Co-authored-by: Maisem Ali <maisem@tailscale.com> Co-authored-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I703b39f05af2e3e1a979be8e77091586cb9ec3eb Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 months ago
Maisem Ali	f8d23b3582	tstest/integration/nat: stream daemon logs directly Updates #13038 Signed-off-by: Maisem Ali <maisem@tailscale.com> Change-Id: I5da5706149c082c27d74c8b894bf53dd9b259e84	4 months ago
Brad Fitzpatrick	082e46b48d	vnet: don't hard-code bradfitz or maisem in paths Updates #13038 Change-Id: Ie8c7591fac3800bb3b7f8c35356cce309fd3c164 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 months ago
Brad Fitzpatrick	6798f8ea88	tstest/natlab/vnet: add port mapping Updates #13038 Change-Id: Iaf274d250398973790873534b236d5cbb34fbe0e Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 months ago
Maisem Ali	12764e9db4	natlab: add NodeAgentClient This adds a new NodeAgentClient type that can be used to invoke the LocalAPI using the LocalClient instead of handcrafted URLs. However, there are certain cases where it does make sense for the node agent to provide more functionality than whats possible with just the LocalClient, as such it also exposes a http.Client to make requests directly. Signed-off-by: Maisem Ali <maisem@tailscale.com>	4 months ago
Brad Fitzpatrick	8594292aa4	vnet: add control/derps to test, stateful firewall Updates #13038 Change-Id: Icd65b34c5f03498b5a7109785bb44692bce8911a Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 months ago
Maisem Ali	a7a394e7d9	tstest/integration: mark TestNATPing flaky Updates #12169 Signed-off-by: Maisem Ali <maisem@tailscale.com>	4 months ago
Brad Fitzpatrick	c6af5bbfe8	all: add test for package comments, fix, add comments as needed Updates #cleanup Change-Id: Ic4304e909d2131a95a38b26911f49e7b1729aaef Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 months ago
Maisem Ali	4b6a0c42c8	safesocket: add ConnectContext This adds a variant for Connect that takes in a context.Context which allows passing through cancellation etc by the caller. Updates tailscale/corp#18266 Signed-off-by: Maisem Ali <maisem@tailscale.com>	6 months ago
Maisem Ali	4a8cb1d9f3	all: use math/rand/v2 more Updates #11058 Signed-off-by: Maisem Ali <maisem@tailscale.com>	6 months ago
Brad Fitzpatrick	e968b0ecd7	cmd/tailscale,controlclient,ipnlocal: fix 'up', deflake tests more The CLI's "up" is kinda chaotic and LocalBackend.Start is kinda chaotic and they both need to be redone/deleted (respectively), but this fixes some buggy behavior meanwhile. We were previously calling StartLoginInteractive (to start the controlclient's RegisterRequest) redundantly in some cases, causing test flakes depending on timing and up's weird state machine. We only need to call StartLoginInteractive in the client if Start itself doesn't. But Start doesn't tell us that. So cheat a bit and a put the information about whether there's a current NodeKey in the ipn.Status. It used to be accessible over LocalAPI via GetPrefs as a private key but we removed that for security. But a bool is fine. So then only call StartLoginInteractive if that bool is false and don't do it in the WatchIPNBus loop. Fixes #12028 Updates #12042 Change-Id: I0923c3f704a9d6afd825a858eb9a63ca7c1df294 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	7 months ago
Maisem Ali	af97e7a793	tailcfg,all: add/plumb Node.IsJailed This adds a new bool that can be sent down from control to do jailing on the client side. Previously this would only be done from control by modifying the packet filter we sent down to clients. This would result in a lot of additional work/CPU on control, we could instead just do this on the client. This has always been a TODO which we keep putting off, might as well do it now. Updates tailscale/corp#19623 Signed-off-by: Maisem Ali <maisem@tailscale.com>	7 months ago
Brad Fitzpatrick	e26f76a1c4	tstest/integration: add more debugging, logs to catch flaky test Updates #11962 Change-Id: I1ab0db69bdf8d1d535aa2cef434c586311f0fe18 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	7 months ago
Brad Fitzpatrick	ce8969d82b	net/portmapper: add envknob to disable portmapper in localhost integration tests Updates #11962 Change-Id: I8212cd814985b455d96986de0d4c45f119516cb3 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	7 months ago
Brad Fitzpatrick	7e0dd61e61	ipn/ipnlocal, tstest/integration: add panic to catch flaky test in the act Updates #11962 Change-Id: Ifa24b82f9c76639bfd83278a7c2fe9cf42897bbb Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	7 months ago
Brad Fitzpatrick	c3c18027c6	all: make more tests pass/skip in airplane mode Updates tailscale/corp#19786 Change-Id: Iedc6730fe91c627b556bff5325bdbaf7bf79d8e6 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	7 months ago
Brad Fitzpatrick	b62cfc430a	tstest/integration/testcontrol: fix data race Noticed in earlier GitHub actions failure. Fixes #11994 Change-Id: Iba8d753caaa3dacbe2da9171d96c5f99b12e62d7 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	7 months ago
Brad Fitzpatrick	b9adbe2002	net/{interfaces,netmon}, all: merge net/interfaces package into net/netmon In prep for most of the package funcs in net/interfaces to become methods in a long-lived netmon.Monitor that can cache things. (Many of the funcs are very heavy to call regularly, whereas the long-lived netmon.Monitor can subscribe to things from the OS and remember answers to questions it's asked regularly later) Updates tailscale/corp#10910 Updates tailscale/corp#18960 Updates #7967 Updates #3299 Change-Id: Ie4e8dedb70136af2d611b990b865a822cd1797e5 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	7 months ago
Brad Fitzpatrick	723c775dbb	tsd, ipnlocal, etc: add tsd.System.HealthTracker, start some plumbing This adds a health.Tracker to tsd.System, accessible via a new tsd.System.HealthTracker method. In the future, that new method will return a tsd.System-specific HealthTracker, so multiple tsnet.Servers in the same process are isolated. For now, though, it just always returns the temporary health.Global value. That permits incremental plumbing over a number of changes. When the second to last health.Global reference is gone, then the tsd.System.HealthTracker implementation can return a private Tracker. The primary plumbing this does is adding it to LocalBackend and its dozen and change health calls. A few misc other callers are also plumbed. Subsequent changes will flesh out other parts of the tree (magicsock, controlclient, etc). Updates #11874 Updates #4136 Change-Id: Id51e73cfc8a39110425b6dc19d18b3975eac75ce Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	7 months ago
Brad Fitzpatrick	05bfa022f2	tailcfg: pointerify RegisterRequest.Auth, omitemptify RegisterResponseAuth We were storing server-side lots of: "Auth":{"Provider":"","LoginName":"","Oauth2Token":null,"AuthKey":""}, That was about 7% of our total storage of pending RegisterRequest bodies. Updates tailscale/corp#19327 Change-Id: Ib73842759a2b303ff5fe4c052a76baea0d68ae7d Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	7 months ago
Brad Fitzpatrick	7c1d6e35a5	all: use Go 1.22 range-over-int Updates #11058 Change-Id: I35e7ef9b90e83cac04ca93fd964ad00ed5b48430 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	8 months ago
Brad Fitzpatrick	0fba9e7570	cmd/tailscale/cli: prevent concurrent Start calls in 'up' Seems to deflake tstest/integration tests. I can't reproduce it anymore on one of my VMs that was consistently flaking after a dozen runs before. Now I can run hundreds of times. Updates #11649 Fixes #7036 Change-Id: I2f7d4ae97500d507bdd78af9e92cd1242e8e44b8 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	8 months ago
Brad Fitzpatrick	8186cd0349	ipn/ipnlocal: delete redundant TestStatusWithoutPeers We have tstest/integration nowadays. And this test was one of the lone holdouts using the to-be-nuked SetControlClientGetterForTesting. Updates #11649 Change-Id: Icf8a6a2e9b8ae1ac534754afa898c00dc0b7623b Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	8 months ago
Brad Fitzpatrick	2409661a0d	control/controlclient: delete old naclbox code, require ts2021 Noise Updates #11585 Updates tailscale/corp#18882 Change-Id: I90e2e4a211c58d429e2b128604614dde18986442 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	8 months ago
Charlotte Brandhorst-Satzkorn	14683371ee	tailscale: update tailfs file and package names (#11590 ) This change updates the tailfs file and package names to their new naming convention. Updates #tailscale/corp#16827 Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>	8 months ago
Joe Tsai	85febda86d	all: use zstdframe where sensible (#11491 ) Use the zstdframe package where sensible instead of plumbing around our own zstd.Encoder just for stateless operations. This causes logtail to have a dependency on zstd, but that's arguably okay since zstd support is implicit to the protocol between a client and the logging service. Also, virtually every caller to logger.NewLogger was manually setting up a zstd.Encoder anyways, meaning that zstd was functionally always a dependency. Updates #cleanup Updates tailscale/corp#18514 Signed-off-by: Joe Tsai <joetsai@digital-static.net>	8 months ago
Percy Wegmann	abab0d4197	tailfs: clean up naming and package structure - Restyles tailfs -> tailFS - Defines interfaces for main TailFS types - Moves implemenatation of TailFS into tailfsimpl package Updates tailscale/corp#16827 Signed-off-by: Percy Wegmann <percy@tailscale.com>	10 months ago
Percy Wegmann	993acf4475	tailfs: initial implementation Add a WebDAV-based folder sharing mechanism that is exposed to local clients at 100.100.100.100:8080 and to remote peers via a new peerapi endpoint at /v0/tailfs. Add the ability to manage folder sharing via the new 'share' CLI sub-command. Updates tailscale/corp#16827 Signed-off-by: Percy Wegmann <percy@tailscale.com>	10 months ago

1 2 3 4 5 ...

276 Commits (65fe0ba7b50928eff53e2750ff2d583e4a33eb7e)