tailscale

Commit Graph

Author	SHA1	Message	Date
Tom Proctor	3099323976	cmd/k8s-operator,k8s-operator,go.{mod,sum}: publish proxy status condition for annotated services (#12463 ) Adds a new TailscaleProxyReady condition type for use in corev1.Service conditions. Also switch our CRDs to use metav1.Condition instead of ConnectorCondition. The Go structs are seralized identically, but it updates some descriptions and validation rules. Update k8s controller-tools and controller-runtime deps to fix the documentation generation for metav1.Condition so that it excludes comments and TODOs. Stop expecting the fake client to populate TypeMeta in tests. See kubernetes-sigs/controller-runtime#2633 for details of the change. Finally, make some minor improvements to validation for service hostnames. Fixes #12216 Co-authored-by: Irbe Krumina <irbe@tailscale.com> Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>	5 months ago
Irbe Krumina	807934f00c	cmd/k8s-operator,k8s-operator: allow proxies accept advertized routes. (#12388 ) Add a new .spec.tailscale.acceptRoutes field to ProxyClass, that can be optionally set to true for the proxies to accept routes advertized by other nodes on tailnet (equivalent of setting --accept-routes to true). Updates tailscale/tailscale#12322,tailscale/tailscale#10684 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	6 months ago
Irbe Krumina	d86d1e7601	cmd/k8s-operator,cmd/containerboot,ipn,k8s-operator: turn off stateful filter for egress proxies. (#12075 ) Turn off stateful filtering for egress proxies to allow cluster traffic to be forwarded to tailnet. Allow configuring stateful filter via tailscaled config file. Deprecate EXPERIMENTAL_TS_CONFIGFILE_PATH env var and introduce a new TS_EXPERIMENTAL_VERSIONED_CONFIG env var that can be used to provide containerboot a directory that should contain one or more tailscaled config files named cap-<tailscaled-cap-version>.hujson. Containerboot will pick the one with the newest capability version that is not newer than its current capability version. Proxies with this change will not work with older Tailscale Kubernetes operator versions - users must ensure that the deployed operator is at the same version or newer (up to 4 version skew) than the proxies. Updates tailscale/tailscale#12061 Signed-off-by: Irbe Krumina <irbe@tailscale.com> Co-authored-by: Maisem Ali <maisem@tailscale.com>	7 months ago
Irbe Krumina	44aa809cb0	cmd/{k8s-nameserver,k8s-operator},k8s-operator: add a kube nameserver, make operator deploy it (#11919 ) * cmd/k8s-nameserver,k8s-operator: add a nameserver that can resolve ts.net DNS names in cluster. Adds a simple nameserver that can respond to A record queries for ts.net DNS names. It can respond to queries from in-memory records, populated from a ConfigMap mounted at /config. It dynamically updates its records as the ConfigMap contents changes. It will respond with NXDOMAIN to queries for any other record types (AAAA to be implemented in the future). It can respond to queries over UDP or TCP. It runs a miekg/dns DNS server with a single registered handler for ts.net domain names. Queries for other domain names will be refused. The intended use of this is: 1) to allow non-tailnet cluster workloads to talk to HTTPS tailnet services exposed via Tailscale operator egress over HTTPS 2) to allow non-tailnet cluster workloads to talk to workloads in the same cluster that have been exposed to tailnet over their MagicDNS names but on their cluster IPs. DNSConfig CRD can be used to configure the operator to deploy kube nameserver (./cmd/k8s-nameserver) to cluster. Updates tailscale/tailscale#10499 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	7 months ago
Irbe Krumina	3af0f526b8	cmd{containerboot,k8s-operator},util/linuxfw: support ExternalName Services (#11802 ) * cmd/containerboot,util/linuxfw: support proxy backends specified by DNS name Adds support for optionally configuring containerboot to proxy traffic to backends configured by passing TS_EXPERIMENTAL_DEST_DNS_NAME env var to containerboot. Containerboot will periodically (every 10 minutes) attempt to resolve the DNS name and ensure that all traffic sent to the node's tailnet IP gets forwarded to the resolved backend IP addresses. Currently: - if the firewall mode is iptables, traffic will be load balanced accross the backend IP addresses using round robin. There are no health checks for whether the IPs are reachable. - if the firewall mode is nftables traffic will only be forwarded to the first IP address in the list. This is to be improved. * cmd/k8s-operator: support ExternalName Services Adds support for exposing endpoints, accessible from within a cluster to the tailnet via DNS names using ExternalName Services. This can be done by annotating the ExternalName Service with tailscale.com/expose: "true" annotation. The operator will deploy a proxy configured to route tailnet traffic to the backend IPs that service.spec.externalName resolves to. The backend IPs must be reachable from the operator's namespace. Updates tailscale/tailscale#10606 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	7 months ago
Irbe Krumina	bbe194c80d	cmd/k8s-operator: correctly determine cluster domain (#11512 ) Kubernetes cluster domain defaults to 'cluster.local', but can also be customized. We need to determine cluster domain to set up in-cluster forwarding to our egress proxies. This was previously hardcoded to 'cluster.local', so was the egress proxies were not usable in clusters with custom domains. This PR ensures that we attempt to determine the cluster domain by parsing /etc/resolv.conf. In case the cluster domain cannot be determined from /etc/resolv.conf, we fall back to 'cluster.local'. Updates tailscale/tailscale#10399,tailscale/tailscale#11445 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	7 months ago
Irbe Krumina	231e44e742	Revert "cmd/{k8s-nameserver,k8s-operator},k8s-operator: add a kube nameserver, make operator deploy it (#11017 )" (#11669 ) Temporarily reverting this PR to avoid releasing half finished featue. This reverts commit `9e2f58f846`. Signed-off-by: Irbe Krumina <irbe@tailscale.com>	8 months ago
Irbe Krumina	9e2f58f846	cmd/{k8s-nameserver,k8s-operator},k8s-operator: add a kube nameserver, make operator deploy it (#11017 ) * cmd/k8s-nameserver,k8s-operator: add a nameserver that can resolve ts.net DNS names in cluster. Adds a simple nameserver that can respond to A record queries for ts.net DNS names. It can respond to queries from in-memory records, populated from a ConfigMap mounted at /config. It dynamically updates its records as the ConfigMap contents changes. It will respond with NXDOMAIN to queries for any other record types (AAAA to be implemented in the future). It can respond to queries over UDP or TCP. It runs a miekg/dns DNS server with a single registered handler for ts.net domain names. Queries for other domain names will be refused. The intended use of this is: 1) to allow non-tailnet cluster workloads to talk to HTTPS tailnet services exposed via Tailscale operator egress over HTTPS 2) to allow non-tailnet cluster workloads to talk to workloads in the same cluster that have been exposed to tailnet over their MagicDNS names but on their cluster IPs. Updates tailscale/tailscale#10499 Signed-off-by: Irbe Krumina <irbe@tailscale.com> * cmd/k8s-operator/deploy/crds,k8s-operator: add DNSConfig CustomResource Definition DNSConfig CRD can be used to configure the operator to deploy kube nameserver (./cmd/k8s-nameserver) to cluster. Signed-off-by: Irbe Krumina <irbe@tailscale.com> * cmd/k8s-operator,k8s-operator: optionally reconcile nameserver resources Adds a new reconciler that reconciles DNSConfig resources. If a DNSConfig is deployed to cluster, the reconciler creates kube nameserver resources. This reconciler is only responsible for creating nameserver resources and not for populating nameserver's records. Signed-off-by: Irbe Krumina <irbe@tailscale.com> * cmd/{k8s-operator,k8s-nameserver}: generate DNSConfig CRD for charts, append to static manifests Signed-off-by: Irbe Krumina <irbe@tailscale.com> --------- Signed-off-by: Irbe Krumina <irbe@tailscale.com>	8 months ago
Irbe Krumina	b0c3e6f6c5	cmd/k8s-operator,ipn/conf.go: fix --accept-routes for proxies (#11453 ) Fix a bug where all proxies got configured with --accept-routes set to true. The bug was introduced in https://github.com/tailscale/tailscale/pull/11238. Updates#cleanup Signed-off-by: Irbe Krumina <irbe@tailscale.com>	8 months ago
Irbe Krumina	95dcc1745b	cmd/k8s-operator: reconcile tailscale Ingresses when their backend Services change. (#11255 ) This is so that if a backend Service gets created after the Ingress, it gets picked up by the operator. Updates tailscale/tailscale#11251 Signed-off-by: Irbe Krumina <irbe@tailscale.com> Co-authored-by: Anton Tolchanov <1687799+knyar@users.noreply.github.com>	9 months ago
Irbe Krumina	303125d96d	cmd/k8s-operator: configure all proxies with declarative config (#11238 ) Containerboot container created for operator's ingress and egress proxies are now always configured by passing a configfile to tailscaled (tailscaled --config <configfile-path>. It does not run 'tailscale set' or 'tailscale up'. Upgrading existing setups to this version as well as downgrading existing setups at this version works. Updates tailscale/tailscale#10869 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	9 months ago
Irbe Krumina	5bd19fd3e3	cmd/k8s-operator,k8s-operator: proxy configuration mechanism via a new ProxyClass custom resource (#11074 ) * cmd/k8s-operator,k8s-operator: introduce proxy configuration mechanism via ProxyClass custom resource. ProxyClass custom resource can be used to specify customizations for the proxy resources created by the operator. Add a reconciler that validates ProxyClass resources and sets a Ready condition to True or False with a corresponding reason and message. This is required because some fields (labels and annotations) require complex validations that cannot be performed at custom resource apply time. Reconcilers that use the ProxyClass to configure proxy resources are expected to verify that the ProxyClass is Ready and not proceed with resource creation if configuration from a ProxyClass that is not yet Ready is required. If a tailscale ingress/egress Service is annotated with a tailscale.com/proxy-class annotation, look up the corresponding ProxyClass and, if it is Ready, apply the configuration from the ProxyClass to the proxy's StatefulSet. If a tailscale Ingress has a tailscale.com/proxy-class annotation and the referenced ProxyClass custom resource is available and Ready, apply configuration from the ProxyClass to the proxy resources that will be created for the Ingress. Add a new .proxyClass field to the Connector spec. If connector.spec.proxyClass is set to a ProxyClass that is available and Ready, apply configuration from the ProxyClass to the proxy resources created for the Connector. Ensure that when Helm chart is packaged, the ProxyClass yaml is added to chart templates. Ensure that static manifest generator adds ProxyClass yaml to operator.yaml. Regenerate operator.yaml Signed-off-by: Irbe Krumina <irbe@tailscale.com>	10 months ago
Irbe Krumina	a6cc2fdc3e	cmd/{containerboot,k8s-operator/deploy/manifests}: optionally allow proxying cluster traffic to a cluster target via ingress proxy (#11036 ) * cmd/containerboot,cmd/k8s-operator/deploy/manifests: optionally forward cluster traffic via ingress proxy. If a tailscale Ingress has tailscale.com/experimental-forward-cluster-traffic-via-ingress annotation, configure the associated ingress proxy to have its tailscale serve proxy to listen on Pod's IP address. This ensures that cluster traffic too can be forwarded via this proxy to the ingress backend(s). In containerboot, if EXPERIMENTAL_PROXY_CLUSTER_TRAFFIC_VIA_INGRESS is set to true and the node is Kubernetes operator ingress proxy configured via Ingress, make sure that traffic from within the cluster can be proxied to the ingress target. Updates tailscale/tailscale#10499 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	10 months ago
Irbe Krumina	05093ea7d9	cmd/k8s-operator,k8s-operator: allow the operator to deploy exit nodes via Connector custom resource (#10724 ) cmd/k8s-operator/deploy/crds,k8s-operator/apis/v1alpha1: allow to define an exit node via Connector CR. Make it possible to define an exit node to be deployed to a Kubernetes cluster via Connector Custom resource. Also changes to Connector API so that one Connector corresponds to one Tailnet node that can be either a subnet router or an exit node or both. The Kubernetes operator parses Connector custom resource and, if .spec.isExitNode is set, configures that Tailscale node deployed for that connector as an exit node. Signed-off-by: Irbe Krumina <irbe@tailscale.com> Co-authored-by: Anton Tolchanov <anton@tailscale.com>	11 months ago
Irbe Krumina	1a08ea5990	cmd/k8s-operator: operator can create subnetrouter (#9505 ) * k8s-operator,cmd/k8s-operator,Makefile,scripts,.github/workflows: add Connector kube CRD. Connector CRD allows users to configure the Tailscale Kubernetes operator to deploy a subnet router to expose cluster CIDRs or other CIDRs available from within the cluster to their tailnet. Also adds various CRD related machinery to generate CRD YAML, deep copy implementations etc. Engineers will now have to run 'make kube-generate-all` after changing kube files to ensure that all generated files are up to date. * cmd/k8s-operator,k8s-operator: reconcile Connector resources Reconcile Connector resources, create/delete subnetrouter resources in response to changes to Connector(s). Connector reconciler will not be started unless ENABLE_CONNECTOR env var is set to true. This means that users who don't want to use the alpha Connector custom resource don't have to install the Connector CRD to their cluster. For users who do want to use it the flow is: - install the CRD - install the operator (via Helm chart or using static manifests). For Helm users set .values.enableConnector to true, for static manifest users, set ENABLE_CONNECTOR to true in the static manifest. Updates tailscale/tailscale#502 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	12 months ago
Irbe Krumina	18ceb4e1f6	cmd/{containerboot,k8s-operator}: allow users to define tailnet egress target by FQDN (#10360 ) * cmd/containerboot: proxy traffic to tailnet target defined by FQDN Add a new Service annotation tailscale.com/tailnet-fqdn that users can use to specify a tailnet target for which an egress proxy should be deployed in the cluster. Updates tailscale/tailscale#10280 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	1 year ago
Irbe Krumina	cac290da87	cmd/k8s-operator: users can configure firewall mode for kube operator proxies (#9769 ) * cmd/k8s-operator: users can configure operator to set firewall mode for proxies Users can now pass PROXY_FIREWALL_MODE={nftables,auto,iptables} to operator to make it create ingress/egress proxies with that firewall mode Also makes sure that if an invalid firewall mode gets configured, the operator will not start provisioning proxy resources, but will instead log an error and write an error event to the related Service. Updates tailscale/tailscale#9310 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	1 year ago
Maisem Ali	f53c3be07c	cmd/k8s-operator: use our own container image instead of busybox We already have sysctl in the `tailscale/tailscale` image, just use that. Updates #cleanup Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
Irbe Krumina	c5b2a365de	cmd/k8s-operator: fix egress service name (#9494 ) Updates https://github.com/tailscale/tailscale/issues/502 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	1 year ago
Irbe Krumina	fe709c81e5	cmd/k8s-operator,cmd/containerboot: add kube egress proxy (#9031 ) First part of work for the functionality that allows users to create an egress proxy to access Tailnet services from within Kubernetes cluster workloads. This PR allows creating an egress proxy that can access Tailscale services over HTTP only. Updates tailscale/tailscale#8184 Signed-off-by: irbekrm <irbekrm@gmail.com> Co-authored-by: Maisem Ali <maisem@tailscale.com> Co-authored-by: Rhea Ghosh <rhea@tailscale.com>	1 year ago
Maisem Ali	0c6fe94cf4	cmd/k8s-operator: add matching family addresses to status This was added in `3451b89e5f`, but resulted in the v6 Tailscale address being added to status when when the forwarding only happened on the v4 address. Updates #502 Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
Mike Beaumont	3451b89e5f	cmd/k8s-operator: put Tailscale IPs in Service ingress status Updates #502 Signed-off-by: Mike Beaumont <mjboamail@gmail.com>	1 year ago
Mike Beaumont	ce4bf41dcf	cmd/k8s-operator: support being the default loadbalancer controller Updates #502 Signed-off-by: Mike Beaumont <mjboamail@gmail.com>	1 year ago
Maisem Ali	c8dea67cbf	cmd/k8s-operator: add support for Ingress resources Previously, the operator would only monitor Services and create a Tailscale StatefulSet which acted as a L3 proxy which proxied traffic inbound to the Tailscale IP onto the services ClusterIP. This extends that functionality to also monitor Ingress resources where the `ingressClassName=tailscale` and similarly creates a Tailscale StatefulSet, acting as a L7 proxy instead. Users can override the desired hostname by setting: ``` - tls hosts: - "foo" ``` Hostnames specified under `rules` are ignored as we only create a single host. This is emitted as an event for users to see. Fixes #7895 Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
Maisem Ali	12ac672542	cmd/k8s-operator: handle changes to services w/o teardown Previously users would have to unexpose/expose the service in order to change Hostname/TargetIP. This now applies those changes by causing a StatefulSet rollout now that `a61a9ab087` is in. Updates #502 Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
Brad Fitzpatrick	98a5116434	all: adjust some build tags for plan9 I'm not saying it works, but it compiles. Updates #5794 Change-Id: I2f3c99732e67fe57a05edb25b758d083417f083e Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Maisem Ali	7f6bc52b78	cmd/k8s-operator: refactor operator code It was jumbled doing a lot of things, this breaks it up into the svc reconciliation and the tailscale sts reconciliation. Prep for future commit. Updates #502 Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
Vince Prignano	1a691ec5b2	cmd/k8s-operator: update controller-runtime to v0.15 Fixes #8170 Signed-off-by: Vince Prignano <vince@prigna.com>	2 years ago
Gabriel Martinez	03e848e3b5	cmd/k8s-operator: add support for priorityClassName Updates #8155 Signed-off-by: Gabriel Martinez <gabrielmartinez@sisti.pt>	2 years ago
Brad Fitzpatrick	4664318be2	client/tailscale: revert CreateKey API change, add Client.CreateKeyWithExpiry The client/tailscale is a stable-ish API we try not to break. Revert the Client.CreateKey method as it was and add a new CreateKeyWithExpiry method to do the new thing. And document the expiry field and enforce that the time.Duration can't be between in range greater than 0 and less than a second. Updates #7143 Updates #8124 (reverts it, effectively) Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Matt Brown	9b6e48658f	client: allow the expiry time to be specified for new keys Adds a parameter for create key that allows a number of seconds (less than 90) to be specified for new keys. Fixes https://github.com/tailscale/tailscale/issues/7965 Signed-off-by: Matthew Brown <matthew@bargrove.com>	2 years ago
Andrew Dunham	f85dc6f97c	ci: add more lints (#7909 ) This is a follow-up to #7905 that adds two more linters and fixes the corresponding findings. As per the previous PR, this only flags things that are "obviously" wrong, and fixes the issues found. Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I8739bdb7bc4f75666a7385a7a26d56ec13741b7c	2 years ago
Will Norris	71029cea2d	all: update copyright and license headers This updates all source files to use a new standard header for copyright and license declaration. Notably, copyright no longer includes a date, and we now use the standard SPDX-License-Identifier header. This commit was done almost entirely mechanically with perl, and then some minimal manual fixes. Updates #6865 Signed-off-by: Will Norris <will@tailscale.com>	2 years ago
David Anderson	9bd6a2fb8d	cmd/k8s-operator: support setting a custom hostname. Updates #502 Signed-off-by: David Anderson <danderson@tailscale.com>	2 years ago
David Anderson	835a73cc1f	cmd/k8s-operator: remove unnecessary timed requeue. Previously, we had to do blind timed requeues while waiting for the tailscale hostname, because we looked up the hostname through the API. But now the proxy container image writes back its hostname to the k8s secret, so we get an event-triggered reconcile automatically when the time is right. Updates #502 Signed-off-by: David Anderson <danderson@tailscale.com>	2 years ago
David Anderson	d857fd00b3	cmd/k8s-operator: sprinkle debug logging throughout. As is convention in the k8s world, use zap for structured logging. For development, OPERATOR_LOGGING=dev switches to a more human-readable output than JSON. Updates #502 Signed-off-by: David Anderson <danderson@tailscale.com>	2 years ago
David Anderson	8ccd707218	cmd/k8s-operator: remove times requeues in proxy deletion path. Our reconcile loop gets triggered again when the StatefulSet object finally disappears (in addition to when its deletion starts, as indicated by DeletionTimestamp != 0). So, we don't need to queue additional reconciliations to proceed with the remainder of the cleanup, that happens organically. Signed-off-by: David Anderson <danderson@tailscale.com>	2 years ago
David Anderson	9c77205ba1	cmd/k8s-operator: add more tests for "normal" paths. Tests cover configuring a proxy through an annotation rather than a LoadBalancerClass, and converting between those two modes at runtime. Updates #502. Signed-off-by: David Anderson <danderson@tailscale.com>	2 years ago
David Anderson	c902190e67	cmd/k8s-operator: factor out some of the larger expected test outputs. For other test cases, the operator is going to produce similar generated objects in several codepaths, and those objects are large. Move them out to helpers so that the main test code stays a bit more intelligible. The top-level Service that we start and end with remains in the main test body, because its shape at the start and end is one of the main things that varies a lot between test cases. Updates #502. Signed-off-by: David Anderson <danderson@tailscale.com>	2 years ago
David Anderson	53a9cc76c7	cmd/k8s-operator: rename main.go -> operator.go. Signed-off-by: David Anderson <danderson@tailscale.com>	2 years ago

40 Commits (65fe0ba7b50928eff53e2750ff2d583e4a33eb7e)