tailscale

Commit Graph

Author	SHA1	Message	Date
Todd Neal	c18dc57861	ipn/{ipnserver,ipnlocal}: support incoming Taildrop on TrueNAS Signed-off-by: Todd Neal <todd@tneal.org>	3 years ago
Brad Fitzpatrick	abc00e9c8d	ipn/{ipnserver,ipnlocal}: support incoming Taildrop on Synology If the user has a "Taildrop" shared folder on startup and the "tailscale" system user has read/write access to it, then the user can "tailscale file cp" to their NAS. Updates #2179 (would be fixes, but not super ideal/easy yet) Change-Id: I68e59a99064b302abeb6d8cc84f7d2a09f764990 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	adc5997592	net/tsdial: give netstack a Dialer, start refactoring name resolution This starts to refactor tsdial.Dialer's name resolution to have different stages: in-memory MagicDNS vs system resolution. A future change will plug in ExitDNS resolution. This also plumbs a Dialer into netstack and unexports the dnsMap internals. And it removes some of the async AddNetworkMapCallback usage and replaces it with synchronous updates of the Dialer's netmap from LocalBackend, since the LocalBackend has the Dialer too. Updates #3475 Change-Id: Idcb7b1169878c74f0522f5151031ccbc49fe4cb4 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	ad3d6e31f0	net/tsdial: move macOS/iOS peerapi sockopt logic from LocalBackend Change-Id: I812cae027c40c70cdc701427b1a1850cd9bcd60c Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	c7fb26acdb	net/tsdial: also plumb TUN name and monitor into tsdial.Dialer In prep for moving stuff out of LocalBackend. Change-Id: I9725aa9c3ebc7275f8c40e040b326483c0340127 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	c37af58ea4	net/tsdial: move more weirdo dialing into new tsdial package, plumb Not done yet, but this move more of the outbound dial special casing from random packages into tsdial, which aspires to be the one unified place for all outbound dialing shenanigans. Then this plumbs it all around, so everybody is ultimately holding on to the same dialer. As of this commit, macOS/iOS using an exit node should be able to reach to the exit node's DoH DNS proxy over peerapi, doing the sockopt to stay within the Network Extension. A number of steps remain, including but limited to: * move a bunch more random dialing stuff * make netstack-mode tailscaled be able to use exit node's DNS proxy, teaching tsdial's resolver to use it when an exit node is in use. Updates #1713 Change-Id: I1e8ee378f125421c2b816f47bc2c6d913ddcd2f5 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	87137405e5	ipn/ipnserver: grant js/wasm all localapi permissions Updates #3157 Change-Id: I3b63762583a4d655eac33ce3dfda37a1f5135a57 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	01bd789c26	ipn/ipnserver: add Server.LocalBackend accessor Was done as part of `e6fbc0cd54` for ssh work, but wasn't committed yet. Including it here both to minimize the ssh diff size, and because I need it for a separate change. Change-Id: If6eb54a2ca7150ace96488ed14582c2c05ca3422 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	e6fbc0cd54	cmd/tailscaled, ipn/ipnserver: refactor ipnserver More work towards removing the massive ipnserver.Run and ipnserver.Options and making composable pieces. Work remains. (The getEngine retry loop on Windows complicates things.) For now some duplicate code exists. Once the Windows side is fixed to either not need the retry loop or to move the retry loop into a custom wgengine.Engine wrapper, then we can unify tailscaled_windows.go too. Change-Id: If84d16e3cd15b54ead3c3bb301f27ae78d055f80 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	649f7556e8	cmd/tailscaled, ipn: add tailscaled --statedir flag for var directory Fixes #2932 Change-Id: I1aa2b323ad542386d140f8336bcc4dcbb8310bd0 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	22dbaa0894	ipn/ipnserver: add New, Server.Server Change-Id: I1dc85a5131b9a628d7fc780fde7103492cd3f1f8 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	d381bc2b6c	ipn/ipnserver: move the unserved connection logic to a Listener So future refactors can only deal with a net.Listener and be unconcerned with their caller's (Windows-specific) struggles. Change-Id: I0af588b9a769ab65c59b0bd21f8a0c99abfa1784 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	c23a378f63	ipn/ipnserver: start refactoring ipnserver.Run into smaller pieces I'll keep ipnserver.Run for compatibility, but it'll be a wrapper around several smaller pieces. (more testable too) For now, start untangling some things in preparation. Plan is to have to have a constructor for the just-exported ipnserver.Server type that takes a LocalBackend and can accept (in a new method) on a provided listener. Change-Id: Ide73aadaac1a82605c97a2af1321d0d8f60b2a8c Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	869999955d	ipn/ipnserver: export server type as Server It's all opaque, there's no constructor, and no exported methods, so it's useless at this point, but this is one small refactoring step. Change-Id: Id961e8880cf0c84f1a0a989eefff48ecb3735add Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Aaron Klotz	6425f497b1	ipn/ipnserver paths: add paths.LegacyStateFilePath Moving this information into a centralized place so that it is accessible to code in subsequent commits. Updates #3011 Signed-off-by: Aaron Klotz <aaron@tailscale.com>	3 years ago
nicksherron	f01ff18b6f	all: fix spelling mistakes Signed-off-by: nicksherron <nsherron90@gmail.com>	3 years ago
Maxime VISONNEAU	4528f448d6	ipn/store/aws, cmd/tailscaled: add AWS SSM ipn.StateStore implementation From https://github.com/tailscale/tailscale/pull/1919 with edits by bradfitz@. This change introduces a new storage provider for the state file. It allows users to leverage AWS SSM parameter store natively within tailscaled, like: $ tailscaled --state=arn:aws:ssm:eu-west-1:123456789:parameter/foo Known limitations: - it is not currently possible to specific a custom KMS key ID RELNOTE=tailscaled on Linux supports using AWS SSM for state Edits-By: Brad Fitzpatrick <bradfitz@tailscale.com> Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com> Signed-off-by: Maxime VISONNEAU <maxime.visonneau@gmail.com>	3 years ago
Brad Fitzpatrick	7d8227e7a6	logpolicy: don't use C:\ProgramData use for tailscale-ipn GUI's log dir tailscale-ipn.exe (the GUI) shouldn't use C:\ProgramData. Also, migrate the earlier misnamed wg32/wg64 conf files if they're present. (That was stopped in `2db877caa3`, but the files exist from fresh 1.14 installs) Updates #2856 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Denton Gentry	280c84e46a	ipn/ipnserver, paths, logpolicy: move Window config files out of %LocalAppData% C:\WINDOWS\system32\config\systemprofile\AppData\Local\ is frequently cleared for almost any reason: Windows updates, System Restore, even various System Cleaner utilities. The server-state.conf file in AppData\Local could be deleted at any time, which would break login until the node is removed from the Admin Panel allowing it to create a new key. Carefully copy any AppData state to ProgramData at startup. If copying the state fails, continue to use AppData so at least there will be connectivity. If there is no state, use ProgramData. We also migrate the log.conf file. Very old versions of Tailscale named the EXE tailscale-ipn, so the log conf was tailscale-ipn.log.conf and more recent versions preserved this filename and cmdName in logs. In this migration we always update the filename to c:\ProgramData\Tailscale\tailscaled.log.conf Updates https://github.com/tailscale/tailscale/issues/2856 Signed-off-by: Denton Gentry <dgentry@tailscale.com>	3 years ago
Maisem Ali	0842e2f45b	ipn/store: add ability to store data as k8s secrets. Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
David Crawshaw	297b3d6fa4	staticcheck.conf: turn off noisy lint errors Signed-off-by: David Crawshaw <crawshaw@tailscale.com>	3 years ago
Maisem Ali	f944614c5c	cmd/tailscale/web: add support for QNAP Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Josh Bleecher Snyder	25df067dd0	all: adapt to opaque netaddr types This commit is a mishmash of automated edits using gofmt: gofmt -r 'netaddr.IPPort{IP: a, Port: b} -> netaddr.IPPortFrom(a, b)' -w . gofmt -r 'netaddr.IPPrefix{IP: a, Port: b} -> netaddr.IPPrefixFrom(a, b)' -w . gofmt -r 'a.IP.Is4 -> a.IP().Is4' -w . gofmt -r 'a.IP.As16 -> a.IP().As16' -w . gofmt -r 'a.IP.Is6 -> a.IP().Is6' -w . gofmt -r 'a.IP.As4 -> a.IP().As4' -w . gofmt -r 'a.IP.String -> a.IP().String' -w . And regexps: \w(.)\.Port = (.) -> $1 = $1.WithPort($2) \w(.)\.IP = (.) -> $1 = $1.WithIP($2) And lots of manual fixups. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Brad Fitzpatrick	366b3d3f62	ipn{,/ipnserver}: delay JSON marshaling of ipn.Notifies If nobody is connected to the IPN bus, don't burn CPU & waste allocations (causing more GC) by encoding netmaps for nobody. This will notably help hello.ipn.dev. Updates tailscale/corp#1773 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	91c9c33036	cmd/tailscaled: don't block ipnserver startup behind engine init on Windows With this change, the ipnserver's safesocket.Listen (the localhost tcp.Listen) happens right away, before any synchronous TUN/DNS/Engine/etc setup work, which might be slow, especially on early boot on Windows. Because the safesocket.Listen starts up early, that means localhost TCP dials (the safesocket.Connect from the GUI) complete successfully and thus the GUI avoids the MessageBox error. (I verified that pacifies it, even without a Listener.Accept; I'd feared that Windows localhost was maybe special and avoided the normal listener backlog). Once the GUI can then connect immediately without errors, the various timeouts then matter less, because the backend is no longer trying to race against the GUI's timeout. So keep retrying on errors for a minute, or 10 minutes if the system just booted in the past 10 minutes. This should fix the problem with Windows 10 desktops auto-logging in and starting the Tailscale frontend which was then showing a MessageBox error about failing to connect to tailscaled, which was slow coming up because the Windows networking stack wasn't up yet. Fingers crossed. Fixes #1313 (previously #1187, etc) Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	f99e63bb17	ipn: don't Logout when Windows GUI disconnects Logout used to be a no-op, so the ipnserver previously synthensized a Logout on disconnect. Now that Logout actually invalidates the node key that was forcing all GUI closes to log people out. Instead, add a method to LocalBackend to specifically mean "the Windows GUI closed, please forget all the state". Fixes tailscale/corp#1591 (ignoring the notification issues, tracked elsewhere) Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	8f3e453356	ipn, cmd/tailscale/cli: add pref to configure sudo-free operator user From discussion with @danderson. Fixes #1684 (in a different way) Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	950fc28887	ipn, paths, cmd/tailscaled: remove LegacyConfigPath, relaynode migration It is time. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Maisem Ali	db13b2d0c8	cmd/tailscale, ipn/localapi: add "tailscale bugreport" subcommand Adding a subcommand which prints and logs a log marker. This should help diagnose any issues that users face. Fixes #1466 Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Brad Fitzpatrick	27c4dd9a97	Revert "cmd/tailscaled, ipn/{ipnlocal,ipnserver}: let netstack get access to LocalBackend" This reverts commit `2bc518dcb2`. @namansood didn't end up needing it in his `770aa71ffb`.	3 years ago
Brad Fitzpatrick	2bc518dcb2	cmd/tailscaled, ipn/{ipnlocal,ipnserver}: let netstack get access to LocalBackend Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	43b30e463c	ipn/ipnserver: refactor permissions checks a bit, document more, fix Windows Windows was only running the localapi on the debug port which was a stopgap at the time while doing peercreds work. Removed that, and wired it up correctly, with some more docs. More clean-up to do after 1.6, moving the localhost TCP auth code into the peercreds package. But that's too much for now, so the docs will have to suffice, even if it's at a bit of an awkward stage with the newly-renamed "NotWindows" field, which still isn't named well, but it's better than its old name of "Unknown" which hasn't been accurate since unix sock peercreds work anyway. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	1ca3e739f7	ipn/ipnserver: set PermitWrite on localapi handler The TODO was easy now with peerCreds and the isReadonlyConn func. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	15b6969a95	ipn/ipnserver: grant client r/w access if peer uid matches tailscaled Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	be779b3587	safesocket, ipn/ipnserver: unify peercred info, fix bug on FreeBSD etc FreeBSD wasn't able to run "tailscale up" since the recent peercred refactoring. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	f11952ad7f	ipn/ipnserver: fix Windows connection auth regression Regression from code movement in `d3efe8caf6` Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	7038c09bc9	ipn/ipnserver: on darwin, let users who are admins use CLI without sudo Tangentially related to #987, #177, #594, #925, #505 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	d3efe8caf6	safesocket, ipn/ipnserver: look up peer creds on Darwin And open up socket permissions like Linux, now that we know who connections are from. This uses the new inet.af/peercred that supports Linux and Darwin at the moment. Fixes #1347 Fixes #1348 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	fdac0387a7	ipn/ipnserver, ipn/ipnlocal: move whois handler to new localapi package	3 years ago
Brad Fitzpatrick	d76334d2f0	ipn: split LocalBackend off into new ipn/ipnlocal package And move a couple other types down into leafier packages. Now cmd/tailscale doesn't bring in netlink, magicsock, wgengine, etc. Fixes #1181 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	006a224f50	ipn/ipnserver, cmd/hello: do whois over unix socket, not debug http Start of a local HTTP API. Not a stable interface yet.	3 years ago
Brad Fitzpatrick	c611d8480b	cmd/tailscaled: add whois/identd-ish debug handler	3 years ago
Brad Fitzpatrick	4d3c09ced4	ipn/ipnserver: on Windows in unattended mode, wait for Engine forever Updates #1187	3 years ago
Brad Fitzpatrick	5611f290eb	ipn, ipnserver: only require sudo on Linux for mutable CLI actions This partially reverts `d6e9fb1df0`, which modified the permissions on the tailscaled Unix socket and thus required "sudo tailscale" even for "tailscale status". Instead, open the permissions back up (on Linux only) but have the server look at the peer creds and only permit read-only actions unless you're root. In the future we'll also have a group that can do mutable actions. On OpenBSD and FreeBSD, the permissions on the socket remain locked down to 0600 from `d6e9fb1df0`. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	053a1d1340	all: annotate log verbosity levels on most egregiously spammy log prints Fixes #924 Fixes #282 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Christine Dodrill	7ea809897d	ipn/ipnserver: enable systemd-notify support Addresses #964 Still to be done: - Figure out the correct logging lines in util/systemd - Figure out if we need to slip the systemd.Status function anywhere else - Log util/systemd errors? (most of the errors are of the "you cannot do anything about this, but it might be a bad idea to crash the program if it errors" kind) Assistance in getting this over the finish line would help a lot. Signed-off-by: Christine Dodrill <me@christine.website> util/systemd: rename the nonlinux file to appease the magic Signed-off-by: Christine Dodrill <me@christine.website> util/systemd: fix package name Signed-off-by: Christine Dodrill <me@christine.website> util/systemd: fix review feedback from @mdlayher Signed-off-by: Christine Dodrill <me@christine.website> cmd/tailscale{,d}: update depaware manifests Signed-off-by: Christine Dodrill <me@christine.website> util/systemd: use sync.Once instead of func init Signed-off-by: Christine Dodrill <me@christine.website> control/controlclient: minor review feedback fixes Signed-off-by: Christine Dodrill <me@christine.website> {control,ipn,systemd}: fix review feedback Signed-off-by: Christine Dodrill <me@christine.website> review feedback fixes Signed-off-by: Christine Dodrill <me@christine.website> ipn: fix sprintf call Signed-off-by: Christine Dodrill <me@christine.website> ipn: make staticcheck less sad Signed-off-by: Christine Dodrill <me@christine.website> ipn: print IP address in connected status Signed-off-by: Christine Dodrill <me@christine.website> ipn: review feedback Signed-off-by: Christine Dodrill <me@christine.website> final fixups Signed-off-by: Christine Dodrill <me@christine.website>	4 years ago
Brad Fitzpatrick	acade77c86	ipn/ipnserver: add knob to disable babysitter	4 years ago
Brad Fitzpatrick	07b6ffd55c	ipn: only use Prefs, not computed stateKey, to determine server mode When the service was running without a client (e.g. after a reboot) and then the owner logs in and the GUI attaches, the computed state key changed to "" (driven by frontend prefs), and then it was falling out of server mode, despite the GUI-provided prefs still saying it wanted server mode. Also add some logging. And remove a scary "Access denied" from a user-visible error, making the two possible already-in-use error messages consistent with each other.	4 years ago
Brad Fitzpatrick	20a357b386	ipn, ipn/ipnserver: add IPN state for server in use, handle explicitly On Windows, we were previously treating a server used by different users as a fatal error, which meant the second user (upon starting Tailscale, explicitly or via Start Up programs) got an invasive error message dialog. Instead, give it its own IPN state and change the Notify.ErrMessage to be details in that state. Then the Windows GUI can be less aggresive about that happening. Also, * wait to close the IPN connection until the server ownership state changes so the GUI doesn't need to repeatedly reconnect to discover changes. * fix a bug discovered during testing: on system reboot, the ipnserver's serverModeUser was getting cleared while the state transitioned from Unknown to Running. Instead, track 'inServerMode' explicitly and remove the old accessor method which was error prone. * fix a rare bug where the client could start up and set the server mode prefs in its Start call and we wouldn't persist that to the StateStore storage's prefs start key. (Previously it was only via a prefs toggle at runtime)	4 years ago
Brad Fitzpatrick	f3aa08de76	ipn/ipnserver: remove "Server mode" from a user-visible error message That's an internal nickname.	4 years ago

1 2

84 Commits (656809e4ee8eb243c6b778a29bfbefc41fbea7f9)