tailscale

Commit Graph

Author	SHA1	Message	Date
Irbe Krumina	38fb23f120	cmd/k8s-operator,k8s-operator: allow users to configure proxy env vars via ProxyClass (#11743 ) Adds new ProxyClass.spec.statefulSet.pod.{tailscaleContainer,tailscaleInitContainer}.Env field that allow users to provide key, value pairs that will be set as env vars for the respective containers. Allow overriding all containerboot env vars, but warn that this is not supported and might break (in docs + a warning when validating ProxyClass). Updates tailscale/tailscale#10709 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	7 months ago
Irbe Krumina	4cbef20569	cmd/k8s-operator: redact auth key from debug logs (#11523 ) Updates#cleanup Signed-off-by: Irbe Krumina <irbe@tailscale.com>	8 months ago
Irbe Krumina	b0c3e6f6c5	cmd/k8s-operator,ipn/conf.go: fix --accept-routes for proxies (#11453 ) Fix a bug where all proxies got configured with --accept-routes set to true. The bug was introduced in https://github.com/tailscale/tailscale/pull/11238. Updates#cleanup Signed-off-by: Irbe Krumina <irbe@tailscale.com>	8 months ago
Irbe Krumina	303125d96d	cmd/k8s-operator: configure all proxies with declarative config (#11238 ) Containerboot container created for operator's ingress and egress proxies are now always configured by passing a configfile to tailscaled (tailscaled --config <configfile-path>. It does not run 'tailscale set' or 'tailscale up'. Upgrading existing setups to this version as well as downgrading existing setups at this version works. Updates tailscale/tailscale#10869 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	9 months ago
Irbe Krumina	5bd19fd3e3	cmd/k8s-operator,k8s-operator: proxy configuration mechanism via a new ProxyClass custom resource (#11074 ) * cmd/k8s-operator,k8s-operator: introduce proxy configuration mechanism via ProxyClass custom resource. ProxyClass custom resource can be used to specify customizations for the proxy resources created by the operator. Add a reconciler that validates ProxyClass resources and sets a Ready condition to True or False with a corresponding reason and message. This is required because some fields (labels and annotations) require complex validations that cannot be performed at custom resource apply time. Reconcilers that use the ProxyClass to configure proxy resources are expected to verify that the ProxyClass is Ready and not proceed with resource creation if configuration from a ProxyClass that is not yet Ready is required. If a tailscale ingress/egress Service is annotated with a tailscale.com/proxy-class annotation, look up the corresponding ProxyClass and, if it is Ready, apply the configuration from the ProxyClass to the proxy's StatefulSet. If a tailscale Ingress has a tailscale.com/proxy-class annotation and the referenced ProxyClass custom resource is available and Ready, apply configuration from the ProxyClass to the proxy resources that will be created for the Ingress. Add a new .proxyClass field to the Connector spec. If connector.spec.proxyClass is set to a ProxyClass that is available and Ready, apply configuration from the ProxyClass to the proxy resources created for the Connector. Ensure that when Helm chart is packaged, the ProxyClass yaml is added to chart templates. Ensure that static manifest generator adds ProxyClass yaml to operator.yaml. Regenerate operator.yaml Signed-off-by: Irbe Krumina <irbe@tailscale.com>	9 months ago
Irbe Krumina	a6cc2fdc3e	cmd/{containerboot,k8s-operator/deploy/manifests}: optionally allow proxying cluster traffic to a cluster target via ingress proxy (#11036 ) * cmd/containerboot,cmd/k8s-operator/deploy/manifests: optionally forward cluster traffic via ingress proxy. If a tailscale Ingress has tailscale.com/experimental-forward-cluster-traffic-via-ingress annotation, configure the associated ingress proxy to have its tailscale serve proxy to listen on Pod's IP address. This ensures that cluster traffic too can be forwarded via this proxy to the ingress backend(s). In containerboot, if EXPERIMENTAL_PROXY_CLUSTER_TRAFFIC_VIA_INGRESS is set to true and the node is Kubernetes operator ingress proxy configured via Ingress, make sure that traffic from within the cluster can be proxied to the ingress target. Updates tailscale/tailscale#10499 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	9 months ago
Irbe Krumina	50b52dbd7d	cmd/k8s-operator: sync StatefulSet labels to their Pods (#10861 ) So that users have predictable label values to use when configuring network policies. Updates tailscale/tailscale#10854 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	10 months ago
Irbe Krumina	169778e23b	cmd/k8s-operator: minor fix in name gen (#10830 ) Updates#cleanup Signed-off-by: Irbe Krumina <irbe@tailscale.com>	10 months ago
Irbe Krumina	469af614b0	cmd/k8s-operator: fix base truncating for extra long Service names (#10825 ) cmd/k8s-operator: fix base truncating for extra long Service names StatefulSet names for ingress/egress proxies are calculated using Kubernetes name generator and the parent resource name as a base. The name generator also cuts the base, but has a higher max cap. This commit fixes a bug where, if we get a shortened base back from the generator, we cut off too little as the base that we have cut will be passed into the generator again, which will then itself cut less because the base is shorter- so we end up with a too long name again. Updates tailscale/tailscale#10807 Co-authored-by: Maisem Ali <maisem@tailscale.com> Signed-off-by: Irbe Krumina <irbekrm@gmail.com>	10 months ago
Irbe Krumina	05093ea7d9	cmd/k8s-operator,k8s-operator: allow the operator to deploy exit nodes via Connector custom resource (#10724 ) cmd/k8s-operator/deploy/crds,k8s-operator/apis/v1alpha1: allow to define an exit node via Connector CR. Make it possible to define an exit node to be deployed to a Kubernetes cluster via Connector Custom resource. Also changes to Connector API so that one Connector corresponds to one Tailnet node that can be either a subnet router or an exit node or both. The Kubernetes operator parses Connector custom resource and, if .spec.isExitNode is set, configures that Tailscale node deployed for that connector as an exit node. Signed-off-by: Irbe Krumina <irbe@tailscale.com> Co-authored-by: Anton Tolchanov <anton@tailscale.com>	10 months ago
Irbe Krumina	1a08ea5990	cmd/k8s-operator: operator can create subnetrouter (#9505 ) * k8s-operator,cmd/k8s-operator,Makefile,scripts,.github/workflows: add Connector kube CRD. Connector CRD allows users to configure the Tailscale Kubernetes operator to deploy a subnet router to expose cluster CIDRs or other CIDRs available from within the cluster to their tailnet. Also adds various CRD related machinery to generate CRD YAML, deep copy implementations etc. Engineers will now have to run 'make kube-generate-all` after changing kube files to ensure that all generated files are up to date. * cmd/k8s-operator,k8s-operator: reconcile Connector resources Reconcile Connector resources, create/delete subnetrouter resources in response to changes to Connector(s). Connector reconciler will not be started unless ENABLE_CONNECTOR env var is set to true. This means that users who don't want to use the alpha Connector custom resource don't have to install the Connector CRD to their cluster. For users who do want to use it the flow is: - install the CRD - install the operator (via Helm chart or using static manifests). For Helm users set .values.enableConnector to true, for static manifest users, set ENABLE_CONNECTOR to true in the static manifest. Updates tailscale/tailscale#502 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	11 months ago
Irbe Krumina	18ceb4e1f6	cmd/{containerboot,k8s-operator}: allow users to define tailnet egress target by FQDN (#10360 ) * cmd/containerboot: proxy traffic to tailnet target defined by FQDN Add a new Service annotation tailscale.com/tailnet-fqdn that users can use to specify a tailnet target for which an egress proxy should be deployed in the cluster. Updates tailscale/tailscale#10280 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	12 months ago
Irbe Krumina	66471710f8	cmd/k8s-operator: truncate long StatefulSet name prefixes (#10343 ) Kubernetes can generate StatefulSet names that are too long and result in invalid Pod revision hash label values. Calculate whether a StatefulSet name generated for a Service or Ingress will be too long and if so, truncate it. Updates tailscale/tailscale#10284 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	12 months ago
Irbe Krumina	ed1b935238	cmd/k8s-operator: allow to install operator via helm (#9920 ) Initial helm manifests. Updates tailscale/tailscale#9222 Signed-off-by: Irbe Krumina <irbe@tailscale.com> Co-authored-by: Maisem Ali <maisem@tailscale.com>	1 year ago
Irbe Krumina	e9956419f6	cmd/k8s-operator: allow cleanup of cluster resources for deleted devices (#9917 ) Users should delete proxies by deleting or modifying the k8s cluster resources that they used to tell the operator to create they proxy. With this flow, the tailscale operator will delete the associated device from the control. However, in some cases users might have already deleted the device from the control manually. Updates tailscale/tailscale#9773 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	1 year ago
Irbe Krumina	cac290da87	cmd/k8s-operator: users can configure firewall mode for kube operator proxies (#9769 ) * cmd/k8s-operator: users can configure operator to set firewall mode for proxies Users can now pass PROXY_FIREWALL_MODE={nftables,auto,iptables} to operator to make it create ingress/egress proxies with that firewall mode Also makes sure that if an invalid firewall mode gets configured, the operator will not start provisioning proxy resources, but will instead log an error and write an error event to the related Service. Updates tailscale/tailscale#9310 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	1 year ago
Maisem Ali	f53c3be07c	cmd/k8s-operator: use our own container image instead of busybox We already have sysctl in the `tailscale/tailscale` image, just use that. Updates #cleanup Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
Maisem Ali	5f4d76c18c	cmd/k8s-operator: rename egress annotation It was tailscale.com/ts-tailnet-target-ip, which was pretty redundant. Change it to tailscale.com/tailnet-ip. Updates #502 Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
Maisem Ali	794650fe50	cmd/k8s-operator: emit event if HTTPS is disabled on Tailnet Instead of confusing users, emit an event that explicitly tells the user that HTTPS is disabled on the tailnet and that ingress may not work until they enable it. Updates #9141 Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
Irbe Krumina	fe709c81e5	cmd/k8s-operator,cmd/containerboot: add kube egress proxy (#9031 ) First part of work for the functionality that allows users to create an egress proxy to access Tailnet services from within Kubernetes cluster workloads. This PR allows creating an egress proxy that can access Tailscale services over HTTP only. Updates tailscale/tailscale#8184 Signed-off-by: irbekrm <irbekrm@gmail.com> Co-authored-by: Maisem Ali <maisem@tailscale.com> Co-authored-by: Rhea Ghosh <rhea@tailscale.com>	1 year ago
Maisem Ali	c919ff540f	cmd/k8s-operator,ipn/store/kubestore: patch secrets instead of updating We would call Update on the secret, but that was racey and would occasionaly fail. Instead use patch whenever we can. Fixes errors like ``` boot: 2023/08/29 01:03:53 failed to set serve config: sending serve config: updating config: writing ServeConfig to StateStore: Operation cannot be fulfilled on secrets "ts-webdav-kfrzv-0": the object has been modified; please apply your changes to the latest version and try again {"level":"error","ts":"2023-08-29T01:03:48Z","msg":"Reconciler error","controller":"ingress","controllerGroup":"networking.k8s.io","controllerKind":"Ingress","Ingress":{"name":"webdav","namespace":"default"},"namespace":"default","name":"webdav","reconcileID":"96f5cfed-7782-4834-9b75-b0950fd563ed","error":"failed to provision: failed to create or get API key secret: Operation cannot be fulfilled on secrets \"ts-webdav-kfrzv-0\": the object has been modified; please apply your changes to the latest version and try again","stacktrace":"sigs.k8s.io/controller-runtime/pkg/internal/controller.(Controller).reconcileHandler\n\tsigs.k8s.io/controller-runtime@v0.15.0/pkg/internal/controller/controller.go:324\nsigs.k8s.io/controller-runtime/pkg/internal/controller.(Controller).processNextWorkItem\n\tsigs.k8s.io/controller-runtime@v0.15.0/pkg/internal/controller/controller.go:265\nsigs.k8s.io/controller-runtime/pkg/internal/controller.(*Controller).Start.func2.2\n\tsigs.k8s.io/controller-runtime@v0.15.0/pkg/internal/controller/controller.go:226"} ``` Updates #502 Updates #7895 Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
Mike Beaumont	3451b89e5f	cmd/k8s-operator: put Tailscale IPs in Service ingress status Updates #502 Signed-off-by: Mike Beaumont <mjboamail@gmail.com>	1 year ago
Maisem Ali	c8dea67cbf	cmd/k8s-operator: add support for Ingress resources Previously, the operator would only monitor Services and create a Tailscale StatefulSet which acted as a L3 proxy which proxied traffic inbound to the Tailscale IP onto the services ClusterIP. This extends that functionality to also monitor Ingress resources where the `ingressClassName=tailscale` and similarly creates a Tailscale StatefulSet, acting as a L7 proxy instead. Users can override the desired hostname by setting: ``` - tls hosts: - "foo" ``` Hostnames specified under `rules` are ignored as we only create a single host. This is emitted as an event for users to see. Fixes #7895 Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
Maisem Ali	12ac672542	cmd/k8s-operator: handle changes to services w/o teardown Previously users would have to unexpose/expose the service in order to change Hostname/TargetIP. This now applies those changes by causing a StatefulSet rollout now that `a61a9ab087` is in. Updates #502 Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
Brad Fitzpatrick	98a5116434	all: adjust some build tags for plan9 I'm not saying it works, but it compiles. Updates #5794 Change-Id: I2f3c99732e67fe57a05edb25b758d083417f083e Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Maisem Ali	836f932ead	cmd/k8s-operator: split operator.go into svc.go/sts.go Updates #502 Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago

26 Commits (62d4be873d5222966424dc1ccca9a05fbbf971e2)