tailscale

Commit Graph

Author	SHA1	Message	Date
Brad Fitzpatrick	964282d34f	ipn,wgengine: remove vestigial Prefs.AllowSingleHosts It was requested by the first customer 4-5 years ago and only used for a brief moment of time. We later added netmap visibility trimming which removes the need for this. It's been hidden by the CLI for quite some time and never documented anywhere else. This keeps the CLI flag, though, out of caution. It just returns an error if it's set to anything but true (its default). Fixes #12058 Change-Id: I7514ba572e7b82519b04ed603ff9f3bdbaecfda7 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	6 months ago
Maisem Ali	af97e7a793	tailcfg,all: add/plumb Node.IsJailed This adds a new bool that can be sent down from control to do jailing on the client side. Previously this would only be done from control by modifying the packet filter we sent down to clients. This would result in a lot of additional work/CPU on control, we could instead just do this on the client. This has always been a TODO which we keep putting off, might as well do it now. Updates tailscale/corp#19623 Signed-off-by: Maisem Ali <maisem@tailscale.com>	6 months ago
Claire Wang	e0287a4b33	wgengine: add exit destination logging enable for wgengine logger (#11952 ) Updates tailscale/corp#18625 Co-authored-by: Kevin Liang <kevinliang@tailscale.com> Signed-off-by: Claire Wang <claire@tailscale.com>	7 months ago
Andrew Dunham	b2b49cb3d5	wgengine/wgcfg/nmcfg: skip expired peers Updates tailscale/corp#19315 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I1ad0c8796efe3dd456280e51efaf81f6d2049772	7 months ago
Brad Fitzpatrick	e1bd7488d0	all: remove LenIter, use Go 1.22 range-over-int instead Updates #11058 Updates golang/go#65685 Change-Id: Ibb216b346e511d486271ab3d84e4546c521e4e22 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	9 months ago
Tom DNetto	c08cf2a9c6	all: declare & plumb IPv6 masquerade address for peer This PR plumbs through awareness of an IPv6 SNAT/masquerade address from the wire protocol through to the low-level (tstun / wgengine). This PR is the first in two PRs for implementing IPv6 NAT support to/from peers. A subsequent PR will implement the data-plane changes to implement IPv6 NAT - this is just plumbing. Signed-off-by: Tom DNetto <tom@tailscale.com> Updates ENG-991	1 year ago
Maisem Ali	4da0689c2c	tailcfg: add Node.HasCap helpers This makes a follow up change less noisy. Updates #cleanup Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
Brad Fitzpatrick	0d991249e1	types/netmap: remove NetworkMap.{Addresses,MachineStatus} And convert all callers over to the methods that check SelfNode. Now we don't have multiple ways to express things in tests (setting fields on SelfNode vs NetworkMap, sometimes inconsistently) and don't have multiple ways to check those two fields (often only checking one or the other). Updates #9443 Change-Id: I2d7ba1cf6556142d219fae2be6f484f528756e3c Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Brad Fitzpatrick	84b94b3146	types/netmap, all: make NetworkMap.SelfNode a tailcfg.NodeView Updates #1909 Change-Id: I8c470cbc147129a652c1d58eac9b790691b87606 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Brad Fitzpatrick	58a4fd43d8	types/netmap, all: use read-only tailcfg.NodeView in NetworkMap Updates #8948 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Brad Fitzpatrick	e8551d6b40	all: use Go 1.21 slices, maps instead of x/exp/{slices,maps} Updates #8419 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Brad Fitzpatrick	7b1c3dfd28	tailcfg,etc: remove unused tailcfg.Node.KeepAlive field The server hasn't sent it in ages. Updates #cleanup Change-Id: I9695ab0f074ec6fb006e11faf3cdfc5ca049fbf8 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Charlotte Brandhorst-Satzkorn	c573bef0aa	tailcfg,wgengine: add initial support for WireGuard only peers A peer can have IsWireGuardOnly, which means it will not support DERP or Disco, and it must have Endpoints filled in order to be usable. In the present implementation only the first Endpoint will be used as the bestAddr. Updates tailscale/corp#10351 Co-authored-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com> Co-authored-by: James Tucker <james@tailscale.com> Signed-off-by: James Tucker <james@tailscale.com>	2 years ago
Maisem Ali	985535aebc	net/tstun,wgengine/*: add support for NAT to routes This adds support to make exit nodes and subnet routers work when in scenarios where NAT is required. It also updates the NATConfig to be generated from a `wgcfg.Config` as that handles merging prefs with the netmap, so it has the required information about whether an exit node is already configured and whether routes are accepted. Updates tailscale/corp#8020 Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Joe Tsai	0d19f5d421	all: replace logtail.{Public,Private}ID with logid.{Public,Private}ID (#7404 ) The log ID types were moved to a separate package so that code that only depend on log ID types do not need to link in the logic for the logtail client itself. Not all code need the logtail client. Signed-off-by: Joe Tsai <joetsai@digital-static.net>	2 years ago
Will Norris	71029cea2d	all: update copyright and license headers This updates all source files to use a new standard header for copyright and license declaration. Notably, copyright no longer includes a date, and we now use the standard SPDX-License-Identifier header. This commit was done almost entirely mechanically with perl, and then some minimal manual fixes. Updates #6865 Signed-off-by: Will Norris <will@tailscale.com>	2 years ago
Joe Tsai	a3602c28bd	wgengine/netlog: embed the StableNodeID of the authoring node (#6105 ) This allows network messages to be annotated with which node it came from. Signed-off-by: Joe Tsai <joetsai@digital-static.net>	2 years ago
Joe Tsai	82f5f438e0	wgengine/wgcfg: plumb down audit log IDs (#5855 ) The node and domain audit log IDs are provided in the map response, but are ultimately going to be used in wgengine since that's the layer that manages the tstun.Wrapper. Do the plumbing work to get this field passed down the stack. Signed-off-by: Joe Tsai <joetsai@digital-static.net>	2 years ago
Brad Fitzpatrick	a12aad6b47	all: convert more code to use net/netip directly perl -i -npe 's,netaddr.IPPrefixFrom,netip.PrefixFrom,' $(git grep -l -F netaddr.) perl -i -npe 's,netaddr.IPPortFrom,netip.AddrPortFrom,' $(git grep -l -F netaddr. ) perl -i -npe 's,netaddr.IPPrefix,netip.Prefix,g' $(git grep -l -F netaddr. ) perl -i -npe 's,netaddr.IPPort,netip.AddrPort,g' $(git grep -l -F netaddr. ) perl -i -npe 's,netaddr.IP\b,netip.Addr,g' $(git grep -l -F netaddr. ) perl -i -npe 's,netaddr.IPv6Raw\b,netip.AddrFrom16,g' $(git grep -l -F netaddr. ) goimports -w . Then delete some stuff from the net/netaddr shim package which is no longer neeed. Updates #5162 Change-Id: Ia7a86893fe21c7e3ee1ec823e8aba288d4566cd8 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	7eaf5e509f	net/netaddr: start migrating to net/netip via new netaddr adapter package Updates #5162 Change-Id: Id7bdec303b25471f69d542f8ce43805328d56c12 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
James Tucker	f9e86e64b7	*: use WireGuard where logged, printed or named Signed-off-by: James Tucker <james@tailscale.com>	3 years ago
Maisem Ali	72d8672ef7	tailcfg: make Node.Hostinfo a HostinfoView Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
David Anderson	0532eb30db	all: replace tailcfg.DiscoKey with key.DiscoPublic. Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	7e6a1ef4f1	tailcfg: use key.NodePublic in wire protocol types. Updates #3206. Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	ef241f782e	wgengine/magicsock: remove uses of tailcfg.DiscoKey. Updates #3206 Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	6e5175373e	types/netmap: use new node key type. Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	a9c78910bd	wgengine/wgcfg: convert to use new node key type. Updates #3206 Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	daf54d1253	control/controlclient: remove TS_DEBUG_USE_DISCO=only. It was useful early in development when disco clients were the exception and tailscale logs were noisier than today, but now non-disco is the exception. Updates #2752 Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	954064bdfe	wgengine/wgcfg/nmcfg: don't configure peers who can't DERP or disco. Fixes #2770 Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	bb10443edf	wgengine/wgcfg: use just the hexlified node key as the WireGuard endpoint. The node key is all magicsock needs to find the endpoint that WireGuard needs. Updates #2752 Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	97693f2e42	wgengine/magicsock: delete legacy AddrSet endpoints. Instead of using the legacy codepath, teach discoEndpoint to handle peers that have a home DERP, but no disco key. We can still communicate with them, but only over DERP. Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
Josh Bleecher Snyder	25df067dd0	all: adapt to opaque netaddr types This commit is a mishmash of automated edits using gofmt: gofmt -r 'netaddr.IPPort{IP: a, Port: b} -> netaddr.IPPortFrom(a, b)' -w . gofmt -r 'netaddr.IPPrefix{IP: a, Port: b} -> netaddr.IPPrefixFrom(a, b)' -w . gofmt -r 'a.IP.Is4 -> a.IP().Is4' -w . gofmt -r 'a.IP.As16 -> a.IP().As16' -w . gofmt -r 'a.IP.Is6 -> a.IP().Is6' -w . gofmt -r 'a.IP.As4 -> a.IP().As4' -w . gofmt -r 'a.IP.String -> a.IP().String' -w . And regexps: \w(.)\.Port = (.) -> $1 = $1.WithPort($2) \w(.)\.IP = (.) -> $1 = $1.WithIP($2) And lots of manual fixups. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Josh Bleecher Snyder	aacb2107ae	all: add extra information to serialized endpoints magicsock.Conn.ParseEndpoint requires a peer's public key, disco key, and legacy ip/ports in order to do its job. We currently accomplish that by: * adding the public key in our wireguard-go fork * encoding the disco key as magic hostname * using a bespoke comma-separated encoding It's a bit messy. Instead, switch to something simpler: use a json-encoded struct containing exactly the information we need, in the form we use it. Our wireguard-go fork still adds the public key to the address when it passes it to ParseEndpoint, but now the code compensating for that is just a couple of simple, well-commented lines. Once this commit is in, we can remove that part of the fork and remove the compensating code. Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	4 years ago
Josh Bleecher Snyder	7ee891f5fd	all: delete wgcfg.Key and wgcfg.PrivateKey For historical reasons, we ended up with two near-duplicate copies of curve25519 key types, one in the wireguard-go module (wgcfg) and one in the tailscale module (types/wgkey). Then we moved wgcfg to the tailscale module. We can now remove the wgcfg key type in favor of wgkey. Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	4 years ago
Josh Bleecher Snyder	07c95a0219	wgengine/wgcfg/nmcfg: consolidate exit node log lines These were getting rate-limited for nodes with many peers. Consolate the output into single lines, which are nicer anyway. Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	4 years ago
Josh Bleecher Snyder	69cdc30c6d	wgengine/wgcfg: remove Config.ListenPort We don't use the port that wireguard-go passes to us (via magicsock.connBind.Open). We ignore it entirely and use the port we selected. When we tell wireguard-go that we're changing the listen_port, it calls connBind.Close and then connBind.Open. And in the meantime, it stops calling the receive functions, which means that we stop receiving and processing UDP and DERP packets. And that is Very Bad. That was never a problem prior to `b3ceca1dd7`, because we passed the SkipBindUpdate flag to our wireguard-go fork, which told wireguard-go not to re-bind on listen_port changes. That commit eliminated the SkipBindUpdate flag. We could write a bunch of code to work around the gap. We could add background readers that process UDP and DERP packets when wireguard-go isn't. But it's simpler to never create the conditions in which wireguard-go rebinds. The other scenario in which wireguard-go re-binds is device.Down. Conveniently, we never call device.Down. We go from device.Up to device.Close, and the latter only when we're shutting down a magicsock.Conn completely. Rubber-ducked-by: Avery Pennarun <apenwarr@tailscale.com> Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Brad Fitzpatrick	7f03c0f8fe	wgengine/wgcfg/nmcfg: reduce some logging when a /0 route skipped Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Josh Bleecher Snyder	7b907615d5	wgengine/wgcfg/nmcfg: remove dead code The call to appendEndpoint updates cpeer.Endpoints. Then it is overwritten in the next line. The only errors from appendEndpoint occur when the host/port pair is malformed, but that cannot happen. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
David Anderson	2404c0ffad	ipn/ipnlocal: only filter out default routes when computing the local wg config. UIs need to see the full unedited netmap in order to know what exit nodes they can offer to the user. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
Brad Fitzpatrick	1e7a35b225	types/netmap: split controlclient.NetworkMap off into its own leaf package Updates #1278 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	6064b6ff47	wgengine/wgcfg/nmcfg: split control/controlclient/netmap.go into own package It couldn't move to ipnlocal due to test dependency cycles. Updates #1278 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago

41 Commits (5f4a4c6744fbda767d5bf4b3299a16aea80c4d1c)