196 Commits (5f177090e323bdacdbb06e70cf0cfdb6c069b79d)

Author	SHA1	Message	Date
Brad Fitzpatrick	3485e4bf5a	derp: make RunConnectionLoop funcs take Messages, support PeerPresentFlags ... PeerPresentFlags was added in 5ffb2668ef but wasn't plumbed through to the RunConnectionLoop. Rather than add yet another parameter (as IP:port was added earlier), pass in the raw PeerPresentMessage and PeerGoneMessage struct values, which are the same things, plus two fields: PeerGoneReasonType for gone and the PeerPresentFlags from 5ffb2668ef. Updates tailscale/corp#17816 Change-Id: Ib19d9f95353651ada90656071fc3656cf58b7987 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 months ago
Aaron Klotz	7dd76c3411	net/netns: add Windows support for bind-to-interface-by-route ... This is implemented via GetBestInterfaceEx. Should we encounter errors or fail to resolve a valid, non-Tailscale interface, we fall back to returning the index for the default interface instead. Fixes #12551 Signed-off-by: Aaron Klotz <aaron@tailscale.com>	5 months ago
Brad Fitzpatrick	91786ff958	cmd/derper: add debug endpoint to adjust mutex profiling rate ... Updates #3560 Change-Id: I474421ce75c79fb66e1c306ed47daebc5a0e069e Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 months ago
Brad Fitzpatrick	86e0f9b912	net/ipset, wgengine/filter/filtertype: add split-out packages ... This moves NewContainsIPFunc from tsaddr to new ipset package. And wgengine/filter types gets split into wgengine/filter/filtertype, so netmap (and thus the CLI, etc) doesn't need to bring in ipset, bart, etc. Then add a test making sure the CLI deps don't regress. Updates #1278 Change-Id: Ia246d6d9502bbefbdeacc4aef1bed9c8b24f54d5 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 months ago
Brad Fitzpatrick	64ac64fb66	net/tsaddr: use bart in NewContainsIPFunc, add tests, benchmarks ... NewContainsIPFunc was previously documented as performing poorly if there were many netip.Prefixes to search over. As such, we never it used it in such cases. This updates it to use bart at a certain threshold (over 6 prefixes, currently), at which point the bart lookup overhead pays off. This is currently kinda useless because we're not using it. But now we can and get wins elsewhere. And we can remove the caveat in the docs. goos: darwin goarch: arm64 pkg: tailscale.com/net/tsaddr │ before │ after │ │ sec/op │ sec/op vs base │ NewContainsIPFunc/empty-8 2.215n ± 11% 2.239n ± 1% +1.08% (p=0.022 n=10) NewContainsIPFunc/cidr-list-1-8 17.44n ± 0% 17.59n ± 6% +0.89% (p=0.000 n=10) NewContainsIPFunc/cidr-list-2-8 27.85n ± 0% 28.13n ± 1% +1.01% (p=0.000 n=10) NewContainsIPFunc/cidr-list-3-8 36.05n ± 0% 36.56n ± 13% +1.41% (p=0.000 n=10) NewContainsIPFunc/cidr-list-4-8 43.73n ± 0% 44.38n ± 1% +1.50% (p=0.000 n=10) NewContainsIPFunc/cidr-list-5-8 51.61n ± 2% 51.75n ± 0% ~ (p=0.101 n=10) NewContainsIPFunc/cidr-list-10-8 95.65n ± 0% 68.92n ± 0% -27.94% (p=0.000 n=10) NewContainsIPFunc/one-ip-8 4.466n ± 0% 4.469n ± 1% ~ (p=0.491 n=10) NewContainsIPFunc/two-ip-8 8.002n ± 1% 7.997n ± 4% ~ (p=0.697 n=10) NewContainsIPFunc/three-ip-8 27.98n ± 1% 27.75n ± 0% -0.82% (p=0.012 n=10) geomean 19.60n 19.07n -2.71% Updates #12486 Change-Id: I2e2320cc4384f875f41721374da536bab995c1ce Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 months ago
Aaron Klotz	bd2a6d5386	util/winutil: add UserProfile type for (un)loading user profiles ... S4U logons do not automatically load the associated user profile. In this PR we add UserProfile to handle that part. Windows docs indicate that we should try to resolve a remote profile path when present, so we attempt to do so when the local computer is joined to a domain. Updates #12383 Signed-off-by: Aaron Klotz <aaron@tailscale.com>	5 months ago
Brad Fitzpatrick	ccdd2e6650	cmd/derper: add a README ... Updates tailscale/corp#20844 Change-Id: Ie3ca5dd7f582f4f298339dd3cd2039243c204ef8 Co-authored-by: James Tucker <james@tailscale.com> Co-authored-by: Maisem Ali <maisem@tailscale.com> Co-authored-by: Andrew Dunham <andrew@tailscale.com> Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 months ago
Aaron Klotz	df86576989	util/winutil: add AllocateContiguousBuffer and SetNTString helper funcs ... AllocateContiguousBuffer is for allocating structs with trailing buffers containing additional data. It is to be used for various Windows structures containing pointers to data located immediately after the struct. SetNTString performs in-place setting of windows.NTString and windows.NTUnicodeString. Updates #12383 Signed-off-by: Aaron Klotz <aaron@tailscale.com>	5 months ago
Maisem Ali	9a64c06a20	all: do not depend on the testing package ... Discovered while looking for something else. Updates tailscale/corp#18935 Signed-off-by: Maisem Ali <maisem@tailscale.com>	6 months ago
Brad Fitzpatrick	3c9be07214	cmd/derper: support TXT-mediated unpublished bootstrap DNS rollouts ... Updates tailscale/coral#127 Change-Id: I2712c50630d0d1272c30305fa5a1899a19ffacef Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	6 months ago
Brad Fitzpatrick	15fc6cd966	derp/derphttp: fix netcheck HTTPS probes ... The netcheck client, when no UDP is available, probes distance using HTTPS. Several problems: * It probes using /derp/latency-check. * But cmd/derper serves the handler at /derp/probe * Despite the difference, it work by accident until c8f4dfc8c0 which made netcheck's probe require a 2xx status code. * in tests, we only use derphttp.Handler, so the cmd/derper-installed mux routes aren't preesnt, so there's no probe. That breaks tests in airplane mode. netcheck.Client then reports "unexpected HTTP status 426" (Upgrade Required) This makes derp handle both /derp/probe and /derp/latency-check equivalently, and in both cmd/derper and derphttp.Handler standalone modes. I notice this when wgengine/magicsock TestActiveDiscovery was failing in airplane mode (no wifi). It still doesn't pass, but it gets further. Fixes #11989 Change-Id: I45213d4bd137e0f29aac8bd4a9ac92091065113f	7 months ago
Brad Fitzpatrick	1fe0983f2d	cmd/derper,tstest/nettest: skip network-needing test in airplane mode ... Not buying wifi on a short flight is a good way to find tests that require network. Whoops. Updates #cleanup Change-Id: Ibe678e9c755d27269ad7206413ffe9971f07d298 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	7 months ago
Brad Fitzpatrick	b9adbe2002	net/{interfaces,netmon}, all: merge net/interfaces package into net/netmon ... In prep for most of the package funcs in net/interfaces to become methods in a long-lived netmon.Monitor that can cache things. (Many of the funcs are very heavy to call regularly, whereas the long-lived netmon.Monitor can subscribe to things from the OS and remember answers to questions it's asked regularly later) Updates tailscale/corp#10910 Updates tailscale/corp#18960 Updates #7967 Updates #3299 Change-Id: Ie4e8dedb70136af2d611b990b865a822cd1797e5 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	7 months ago
Brad Fitzpatrick	3672f29a4e	net/netns, net/dns/resolver, etc: make netmon required in most places ... The goal is to move more network state accessors to netmon.Monitor where they can be cheaper/cached. But first (this change and others) we need to make sure the one netmon.Monitor is plumbed everywhere. Some notable bits: * tsdial.NewDialer is added, taking a now-required netmon * because a tsdial.Dialer always has a netmon, anything taking both a Dialer and a NetMon is now redundant; take only the Dialer and get the NetMon from that if/when needed. * netmon.NewStatic is added, primarily for tests Updates tailscale/corp#10910 Updates tailscale/corp#18960 Updates #7967 Updates #3299 Change-Id: I877f9cb87618c4eb037cee098241d18da9c01691 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	7 months ago
Brad Fitzpatrick	6d69fc137f	ipn/{ipnlocal,localapi},wgengine{,/magicsock}: plumb health.Tracker ... Down to 25 health.Global users. After this remains controlclient & net/dns & wgengine/router. Updates #11874 Updates #4136 Change-Id: I6dd1856e3d9bf523bdd44b60fb3b8f7501d5dc0d Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	7 months ago
Brad Fitzpatrick	723c775dbb	tsd, ipnlocal, etc: add tsd.System.HealthTracker, start some plumbing ... This adds a health.Tracker to tsd.System, accessible via a new tsd.System.HealthTracker method. In the future, that new method will return a tsd.System-specific HealthTracker, so multiple tsnet.Servers in the same process are isolated. For now, though, it just always returns the temporary health.Global value. That permits incremental plumbing over a number of changes. When the second to last health.Global reference is gone, then the tsd.System.HealthTracker implementation can return a private Tracker. The primary plumbing this does is adding it to LocalBackend and its dozen and change health calls. A few misc other callers are also plumbed. Subsequent changes will flesh out other parts of the tree (magicsock, controlclient, etc). Updates #11874 Updates #4136 Change-Id: Id51e73cfc8a39110425b6dc19d18b3975eac75ce Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	7 months ago
Aaron Klotz	7132b782d4	hostinfo: use Distro field for distinguishing Windows Server builds ... Some editions of Windows server share the same build number as their client counterpart; we must use an additional field found in the OS version information to distinguish between them. Even though "Distro" has Linux connotations, it is the most appropriate hostinfo field. What is Windows Server if not an alternate distribution of Windows? This PR populates Distro with "Server" when applicable. Fixes #11785 Signed-off-by: Aaron Klotz <aaron@tailscale.com>	7 months ago
dependabot[bot]	449be38e03	build(deps): bump google.golang.org/protobuf from 1.32.0 to 1.33.0 (#11410) ... * build(deps): bump google.golang.org/protobuf from 1.32.0 to 1.33.0 Bumps google.golang.org/protobuf from 1.32.0 to 1.33.0. --- updated-dependencies: - dependency-name: google.golang.org/protobuf dependency-type: indirect ... Signed-off-by: dependabot[bot] <support@github.com> * cmd/{derper,stund}: update depaware.txt Signed-off-by: Andrew Lytvynov <awly@tailscale.com> --------- Signed-off-by: dependabot[bot] <support@github.com> Signed-off-by: Andrew Lytvynov <awly@tailscale.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> Co-authored-by: Andrew Lytvynov <awly@tailscale.com>	7 months ago
James Tucker	8fa3026614	tsweb: switch to fastuuid for request ID generation ... Request ID generation appears prominently in some services cumulative allocation rate, and while this does not eradicate this issue (the API still makes UUID objects), it does improve the overhead of this API and reduce the amount of garbage that it produces. Updates tailscale/corp#18266 Updates tailscale/corp#19054 Signed-off-by: James Tucker <james@tailscale.com>	7 months ago
Charlotte Brandhorst-Satzkorn	14683371ee	tailscale: update tailfs file and package names (#11590) ... This change updates the tailfs file and package names to their new naming convention. Updates #tailscale/corp#16827 Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>	8 months ago
Brad Fitzpatrick	1c259100b0	cmd/{derper,derpprobe}: add --version flag ... Fixes #11582 Change-Id: If99fc1ab6b89d624fbb07bd104dd882d2c7b50b4 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	8 months ago
Andrew Dunham	34176432d6	cmd/derper, types/logger: move log filter to shared package ... So we can use it in trunkd to quiet down the logs there. Updates #5563 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: Ie3177dc33f5ad103db832aab5a3e0e4f128f973f	9 months ago
Percy Wegmann	e324a5660f	ipn: include full tailfs shares in ipn notifications ... This allows the Mac application to regain access to restricted folders after restarts. Updates tailscale/corp#16827 Signed-off-by: Percy Wegmann <percy@tailscale.com>	9 months ago
James Tucker	0c5e65eb3f	cmd/derper: apply TCP keepalive and timeout to TLS as well ... I missed a case in the earlier patch, and so we're still sending 15s TCP keepalive for TLS connections, now adjusted there too. Updates tailscale/corp#17587 Updates #3363 Signed-off-by: James Tucker <james@tailscale.com>	9 months ago
James Tucker	edbad6d274	cmd/derper: add user timeout and reduce TCP keepalive ... The derper sends an in-protocol keepalive every 60-65s, so frequent TCP keepalives are unnecessary. In this tuning TCP keepalives should never occur for a DERP client connection, as they will send an L7 keepalive often enough to always reset the TCP keepalive timer. If however a connection does not receive an ACK promptly it will now be shutdown, which happens sooner than it would with a normal TCP keepalive tuning. This re-tuning reduces the frequency of network traffic from derp to client, reducing battery cost. Updates tailscale/corp#17587 Updates #3363 Signed-off-by: James Tucker <james@tailscale.com>	9 months ago
Brad Fitzpatrick	10d130b845	cmd/derper, derp, tailcfg: add admission controller URL option ... So derpers can check an external URL for whether to permit access to a certain public key. Updates tailscale/corp#17693 Change-Id: I8594de58f54a08be3e2dbef8bcd1ff9b728ab297 Co-authored-by: Maisem Ali <maisem@tailscale.com> Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	9 months ago
Percy Wegmann	abab0d4197	tailfs: clean up naming and package structure ... - Restyles tailfs -> tailFS - Defines interfaces for main TailFS types - Moves implemenatation of TailFS into tailfsimpl package Updates tailscale/corp#16827 Signed-off-by: Percy Wegmann <percy@tailscale.com>	9 months ago
Percy Wegmann	993acf4475	tailfs: initial implementation ... Add a WebDAV-based folder sharing mechanism that is exposed to local clients at 100.100.100.100:8080 and to remote peers via a new peerapi endpoint at /v0/tailfs. Add the ability to manage folder sharing via the new 'share' CLI sub-command. Updates tailscale/corp#16827 Signed-off-by: Percy Wegmann <percy@tailscale.com>	10 months ago
Brad Fitzpatrick	2bd3c1474b	util/cmpx: delete now that we're using Go 1.22 ... Updates #11058 Change-Id: I09dea8e86f03ec148b715efca339eab8b1f0f644 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	10 months ago
James Tucker	457102d070	go.mod: bump most deps for start of cycle ... Plan9 CI is disabled. 3p dependencies do not build for the target. Contributor enthusiasm appears to have ceased again, and no usage has been made. Skipped gvisor, nfpm, and k8s. Updates #5794 Updates #8043 Signed-off-by: James Tucker <james@tailscale.com>	10 months ago
Joe Tsai	c25968e1c5	all: make use of ctxkey everywhere (#10846) ... Also perform minor cleanups on the ctxkey package itself. Provide guidance on when to use ctxkey.Key[T] over ctxkey.New. Also, allow for interface kinds because the value wrapping trick also happens to fix edge cases with interfaces in Go. Updates #cleanup Signed-off-by: Joe Tsai <joetsai@digital-static.net>	10 months ago
James Tucker	953fa80c6f	cmd/{derper,stund},net/stunserver: add standalone stun server ... Add a standalone server for STUN that can be hosted independently of the derper, and factor that back into the derper. Fixes #8434 Closes #8435 Closes #10745 Signed-off-by: James Tucker <james@tailscale.com>	11 months ago
Adrian Dewhurst	c05c4bdce4	ipn: apply ControlURL policy before login ... Unlike most prefs, the ControlURL policy needs to take effect before login. This resolves an issue where on first start, even when the ControlURL policy is set, it will generate a login URL to the Tailscale SaaS server. Updates tailscale/coral#118 Fixes #10736 Change-Id: I6da2a521f64028c15dbb6ac8175839fc3cc4e858 Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>	11 months ago
Andrew Dunham	a661287c4b	util/cmpx: remove code that's in the stdlib now ... The cmpx.Compare function (and associated interface) are now available in the standard library as cmp.Compare. Remove our version of it and use the version from the standard library. Updates #cleanup Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I4be3ac63d466c05eb7a0babb25cb0d41816fbd53	11 months ago
Marwan Sulaiman	b819f66eb1	tsweb: propagate RequestID via context and entire request ... The recent addition of RequestID was only populated if the HTTP Request had returned an error. This meant that the underlying handler has no access to this request id and any logs it may have emitted were impossible to correlate to that request id. Therefore, this PR adds a middleware to generate request ids and pass them through the request context. The tsweb.StdHandler automatically populates this request id if the middleware is being used. Finally, inner handlers can use the context to retrieve that same request id and use it so that all logs and events can be correlated. Updates #2549 Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>	12 months ago
Brad Fitzpatrick	3d7fb6c21d	derp/derphttp: fix race in mesh watcher ... The derphttp client automatically reconnects upon failure. RunWatchConnectionLoop called derphttp.Client.WatchConnectionChanges once, but that wrapper method called the underlying derp.Client.WatchConnectionChanges exactly once on derphttp.Client's currently active connection. If there's a failure, we need to re-subscribe upon all reconnections. This removes the derphttp.Client.WatchConnectionChanges method, which was basically impossible to use correctly, and changes it to be a boolean field on derphttp.Client alongside MeshKey and IsProber. Then it moves the call to the underlying derp.Client.WatchConnectionChanges to derphttp's client connection code, so it's resubscribed on any reconnect. Some paranoia is then added to make sure people hold the API right, not calling derphttp.Client.RunWatchConnectionLoop on an already-started Client without having set the bool to true. (But still auto-setting it to true if that's the first method that's been called on that derphttp.Client, as is commonly the case, and prevents existing code from breaking) Fixes tailscale/corp#9916 Supercedes tailscale/tailscale#9719 Co-authored-by: Val <valerie@tailscale.com> Co-authored-by: Irbe Krumina <irbe@tailscale.com> Co-authored-by: Anton Tolchanov <anton@tailscale.com> Signed-off-by: Brad Fitzpatrick <brad@danga.com>	1 year ago
Aaron Klotz	95671b71a6	ipn, safesocket: use Windows token in LocalAPI ... On Windows, the idiomatic way to check access on a named pipe is for the server to impersonate the client on its current OS thread, perform access checks using the client's access token, and then revert the OS thread's access token back to its true self. The access token is a better representation of the client's rights than just a username/userid check, as it represents the client's effective rights at connection time, which might differ from their normal rights. This patch updates safesocket to do the aforementioned impersonation, extract the token handle, and then revert the impersonation. We retain the token handle for the remaining duration of the connection (the token continues to be valid even after we have reverted back to self). Since the token is a property of the connection, I changed ipnauth to wrap the concrete net.Conn to include the token. I then plumbed that change through ipnlocal, ipnserver, and localapi as necessary. I also added a PermitLocalAdmin flag to the localapi Handler which I intend to use for controlling access to a few new localapi endpoints intended for configuring auto-update. Updates https://github.com/tailscale/tailscale/issues/755 Signed-off-by: Aaron Klotz <aaron@tailscale.com>	1 year ago
James Tucker	c1ef55249a	types/ipproto: import and test string parsing for ipproto ... IPProto has been being converted to and from string formats in multiple locations with variations in behavior. TextMarshaller and JSONMarshaller implementations are now added, along with defined accepted and preferred formats to centralize the logic into a single cross compatible implementation. Updates tailscale/corp#15043 Fixes tailscale/corp#15141 Signed-off-by: James Tucker <james@tailscale.com>	1 year ago
Maisem Ali	9d96e05267	net/packet: split off checksum munging into different pkg ... The current structure meant that we were embedding netstack in the tailscale CLI and in the GUIs. This removes that by isolating the checksum munging to a different pkg which is only called from `net/tstun`. Fixes #9756 Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
Brad Fitzpatrick	93c6e1d53b	tstest/deptest: add check that x/exp/{maps,slices} imported as xfoo ... Updates #cleanup Change-Id: I4cbb5e477c739deddf7a46b66f286c9fdb106279 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Tom DNetto	656a77ab4e	net/packet: implement methods for rewriting v6 addresses ... Implements the ability for the address-rewriting code to support rewriting IPv6 addresses. Specifically, UpdateSrcAddr & UpdateDstAddr. Signed-off-by: Tom DNetto <tom@tailscale.com> Updates https://github.com/tailscale/corp/issues/11202	1 year ago
James Tucker	0c8c374a41	go.mod: bump all dependencies except go-billy ... go-billy is held back at v5.4.1 in order to avoid a newly introduced subdependency that is not compatible with plan9. Updates #8043 Signed-off-by: James Tucker <james@tailscale.com>	1 year ago
Maisem Ali	354455e8be	ipn: use NodeCapMap in CheckFunnel ... These were missed when adding NodeCapMap and resulted in tsnet binaries not being able to turn on funnel. Fixes #9566 Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
Maisem Ali	19a9d9037f	tailcfg: add NodeCapMap ... Like PeerCapMap, add a field to `tailcfg.Node` which provides a map of Capability to raw JSON messages which are deferred to be parsed later by the application code which cares about the specific capabilities. This effectively allows us to prototype new behavior without having to commit to a schema in tailcfg, and it also opens up the possibilities to develop custom behavior in tsnet applications w/o having to plumb through application specific data in the MapResponse. Updates #4217 Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
Brad Fitzpatrick	1262df0578	net/netmon, net/tsdial: add some link change metrics ... Updates #9040 Change-Id: I2c87572d79d2118bcf1f0122eccfe712c1bea9d5 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
David Anderson	8b492b4121	net/wsconn: accept a remote addr string and plumb it through ... This makes wsconn.Conns somewhat present reasonably when they are the client of an http.Request, rather than just put a placeholder in that field. Updates tailscale/corp#13777 Signed-off-by: David Anderson <danderson@tailscale.com>	1 year ago
Aaron Klotz	ea693eacb6	util/winutil: add RegisterForRestart, allowing programs to indicate their preferences to the Windows restart manager ... In order for the installer to restart the GUI correctly post-upgrade, we need the GUI to be able to register its restart preferences. This PR adds API support for doing so. I'm adding it to OSS so that it is available should we need to do any such registrations on OSS binaries in the future. Updates https://github.com/tailscale/corp/issues/13998 Signed-off-by: Aaron Klotz <aaron@tailscale.com>	1 year ago
Maisem Ali	8a5ec72c85	cmd/cloner: use maps.Clone and ptr.To ... Updates #cleanup Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
Brad Fitzpatrick	e8551d6b40	all: use Go 1.21 slices, maps instead of x/exp/{slices,maps} ... Updates #8419 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Denton Gentry	e8d140654a	cmd/derper: count bootstrap dns unique lookups. ... Updates https://github.com/tailscale/corp/issues/13979 Signed-off-by: Denton Gentry <dgentry@tailscale.com>	1 year ago