tailscale

Commit Graph

Author	SHA1	Message	Date
Jordan Whited	adb7a86559	cmd/stunc: support ipv6 address targets (#12166 ) Updates #cleanup Signed-off-by: Jordan Whited <jordan@tailscale.com>	6 months ago
James Tucker	8d1249550a	net/netcheck,wgengine/magicsock: add potential workaround for Palo Alto DIPP misbehavior Palo Alto firewalls have a typically hard NAT, but also have a mode called Persistent DIPP that is supposed to provide consistent port mapping suitable for STUN resolution of public ports. Persistent DIPP works initially on most Palo Alto firewalls, but some models/software versions have a bug which this works around. The bug symptom presents as follows: - STUN sessions resolve a consistent public IP:port to start with - Much later netchecks report the same IP:Port for a subset of sessions, most often the users active DERP, and/or the port related to sustained traffic. - The broader set of DERPs in a full netcheck will now consistently observe a new IP:Port. - After this point of observation, new inbound connections will only succeed to the new IP:Port observed, and existing/old sessions will only work to the old binding. In this patch we now advertise the lowest latency global endpoint discovered as we always have, but in addition any global endpoints that are observed more than once in a single netcheck report. This should provide viable endpoints for potential connection establishment across a NAT with this behavior. Updates tailscale/corp#19106 Signed-off-by: James Tucker <james@tailscale.com>	6 months ago
Charlotte Brandhorst-Satzkorn	6831a29f8b	publicapi: create new home for API docs and split into catagory files (#12116 ) This change creates a new folder called publicapi that will become the future home to the Tailscale public API docs. This change also splits the existing API docs (still located in api.md) into separate files, for easier reading and contribution. Updates tailscale/corp#19526 Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>	6 months ago
Andrea Gottardo	e5f67f90a2	xcode: allow ICMP ping relay on macOS + iOS platforms (#12048 ) Fixes tailscale/tailscale#10393 Fixes tailscale/corp#15412 Fixes tailscale/corp#19808 On Apple platforms, exit nodes and subnet routers have been unable to relay pings from Tailscale devices to non-Tailscale devices due to sandbox restrictions imposed on our network extensions by Apple. The sandbox prevented the code in netstack.go from spawning the `ping` process which we were using. Replace that exec call with logic to send an ICMP echo request directly, which appears to work in userspace, and not trigger a sandbox violation in the syslog. Signed-off-by: Andrea Gottardo <andrea@gottardo.me>	6 months ago
Percy Wegmann	59848fe14b	drive: rewrite LOCK paths Fixes #12097 Signed-off-by: Percy Wegmann <percy@tailscale.com>	6 months ago
James Tucker	87f00d76c4	tool/gocross: treat empty GOOS/GOARCH as native GOOS/GOARCH Tracking down the side effect can otherwise be a pain, for example on Darwin an empty GOOS resulted in CGO being implicitly disabled. The user intended for `export GOOS=` to act like unset, and while this is a misunderstanding, the main toolchain would treat it this way. Fixes tailscale/corp#20059 Signed-off-by: James Tucker <james@tailscale.com>	6 months ago
Irbe Krumina	76c30e014d	cmd/containerboot: warn when an ingress proxy with an IPv4 tailnet address is being created for an IPv6 backend(s) (#12159 ) Updates tailscale/tailscale#12156 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	6 months ago
Maisem Ali	8feb4ff5d2	version: add GitCommitTime to Meta Updates tailscale/corp#1297 Signed-off-by: Maisem Ali <maisem@tailscale.com>	6 months ago
Maisem Ali	359ef61263	Revert "version: add Info func to expose EmbeddedInfo" This reverts commit `e3dec086e6`. Going to reuse Meta instead as that is already exported. Updates tailscale/corp#1297 Signed-off-by: Maisem Ali <maisem@tailscale.com>	6 months ago
Sonia Appasamy	89947606b2	api.md: document device invite apis Updates tailscale/corp#18153 Signed-off-by: Sonia Appasamy <sonia@tailscale.com>	6 months ago
Sonia Appasamy	b094e8c925	api.md: document user invite apis Updates tailscale/corp#18153 Signed-off-by: Sonia Appasamy <sonia@tailscale.com>	6 months ago
Maisem Ali	e3dec086e6	version: add Info func to expose EmbeddedInfo To be used to in a different repo. Updates tailscale/corp#1297 Signed-off-by: Maisem Ali <maisem@tailscale.com>	6 months ago
Kevin Liang	7f83f9fc83	Net/DNS/Publicdns: update the IPv6 range that we use to recreate route endpoint for control D In this commit I updated the Ipv6 range we use to generate Control D DOH ip, we were using the NextDNSRanges to generate Control D DOH ip, updated to use the correct range. Updates: #7946 Signed-off-by: Kevin Liang <kevinliang@tailscale.com>	6 months ago
Brad Fitzpatrick	6877d44965	prober: plumb a now-required netmon to derphttp Updates #11896 Change-Id: Ie2f9cd024d85b51087d297aa36c14a9b8a2b8129 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	6 months ago
Maisem Ali	1f51bb6891	net/tstun: do SNAT after filterPacketOutboundToWireGuard In a configuration where the local node (ip1) has a different IP (ip2) that it uses to communicate with a peer (ip3) we would do UDP flow tracking on the `ip2->ip3` tuple. When we receive the response from the peer `ip3->ip2` we would dnat it back to `ip3->ip1` which would then not match the flow track state and the packet would get dropped. To fix this, we should do flow tracking on the `ip1->ip3` tuple instead of `ip2->ip3` which requires doing SNAT after the running filterPacketOutboundToWireGuard. Updates tailscale/corp#19971, tailscale/corp#8020 Signed-off-by: Maisem Ali <maisem@tailscale.com>	6 months ago
Andrea Gottardo	60266be298	version: fix macOS uploads by increasing build number prefix (#12134 ) Fixes tailscale/corp#19979 A build with version number 275 was uploaded to the App Store without bumping OSS first. The presence of that build is causing any 274.* build to be rejected. To address this, added -1 to the year component, which means new builds will use the 275.* prefix. Signed-off-by: Andrea Gottardo <andrea@gottardo.me>	6 months ago
Andrew Dunham	c6d42b1093	derp: remove stats goroutine, use a timer Without changing behaviour, don't create a goroutine per connection that sits and sleeps, but rather use a timer that wakes up and gathers statistics on a regular basis. Fixes #12127 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: Ibc486447e403070bdc3c2cd8ae340e7d02854f21	6 months ago
Irbe Krumina	7ef2f72135	util/linuxfw: fix IPv6 availability check for nftables (#12009 ) * util/linuxfw: fix IPv6 NAT availability check for nftables When running firewall in nftables mode, there is no need for a separate NAT availability check (unlike with iptables, there are no hosts that support nftables, but not IPv6 NAT - see tailscale/tailscale#11353). This change fixes a firewall NAT availability check that was using the no-longer set ipv6NATAvailable field by removing the field and using a method that, for nftables, just checks that IPv6 is available. Updates tailscale/tailscale#12008 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	7 months ago
Brad Fitzpatrick	8aa5c3534d	ipn/ipnlocal: simplify authURL vs authURLSticky, remove interact field The previous LocalBackend & CLI 'up' changes improved some stuff, but might've been too aggressive in some edge cases. This simplifies the authURL vs authURLSticky distinction and removes the interact field, which seemed to just just be about duplicate URL suppression in IPN bus, back from when the IPN bus was a single client at a time. This moves that suppression to a different spot. Fixes #12119 Updates #12028 Updates #12042 Change-Id: I1f8800b1e82ccc1c8a0d7abba559e7404ddf41e4 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	7 months ago
Parker Higgins	7b3e30f391	words: add some fruit with scales (#8460 ) Signed-off-by: Parker Higgins <parker@tailscale.com>	7 months ago
Maisem Ali	79b2d425cf	types/views: move AsMap to Map from Map This was a typo in `2e19790f61`. It should have been on `Map` and not on `Map` as otherwise it doesn't allow for chaining like `someView.SomeMap().AsMap()` and requires first assigning it to a variable. Updates #typo Signed-off-by: Maisem Ali <maisem@tailscale.com>	7 months ago
Charlotte Brandhorst-Satzkorn	fc1ae97e10	words: I had a feline we were missing some words (#12098 ) pspspsps Updates #tailscale/corp#14698 Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>	7 months ago
Maisem Ali	486a423716	tsnet: split user facing and backend logging This adds a new `UserLogf` field to the `Server` struct. When set this any logs generated by Server are logged using `UserLogf` and all spammy backend logs are logged to `Logf`. If it `UserLogf` is unset, we default to `log.Printf` and if `Logf` is unset we discard all the spammy logs. Fixes #12094 Signed-off-by: Maisem Ali <maisem@tailscale.com>	7 months ago
Percy Wegmann	7209c4f91e	drive: parse depth 1 PROPFIND results to include children in cache Clients often perform a PROPFIND for the parent directory before performing PROPFIND for specific children within that directory. The PROPFIND for the parent directory is usually done at depth 1, meaning that we already have information for all of the children. By immediately adding that to the cache, we save a roundtrip to the remote peer on the PROPFIND for the specific child. Updates tailscale/corp#19779 Signed-off-by: Percy Wegmann <percy@tailscale.com>	7 months ago
Irbe Krumina	d86d1e7601	cmd/k8s-operator,cmd/containerboot,ipn,k8s-operator: turn off stateful filter for egress proxies. (#12075 ) Turn off stateful filtering for egress proxies to allow cluster traffic to be forwarded to tailnet. Allow configuring stateful filter via tailscaled config file. Deprecate EXPERIMENTAL_TS_CONFIGFILE_PATH env var and introduce a new TS_EXPERIMENTAL_VERSIONED_CONFIG env var that can be used to provide containerboot a directory that should contain one or more tailscaled config files named cap-<tailscaled-cap-version>.hujson. Containerboot will pick the one with the newest capability version that is not newer than its current capability version. Proxies with this change will not work with older Tailscale Kubernetes operator versions - users must ensure that the deployed operator is at the same version or newer (up to 4 version skew) than the proxies. Updates tailscale/tailscale#12061 Signed-off-by: Irbe Krumina <irbe@tailscale.com> Co-authored-by: Maisem Ali <maisem@tailscale.com>	7 months ago
Claire Wang	e070af7414	ipnlocal, magicsock: add more description to storing last suggested exit (#11998 ) node related functions Updates tailscale/corp#19681 Signed-off-by: Claire Wang <claire@tailscale.com>	7 months ago
Andrew Dunham	5708fc0639	wgengine/router: print Docker warning when stateful filtering is enabled When Docker is detected on the host and stateful filtering is enabled, Docker containers may be unable to reach Tailscale nodes (depending on the network settings of a container). Detect Docker when stateful filtering is enabled and print a health warning to aid users in noticing this issue. We avoid printing the warning if the current node isn't advertising any subnet routes and isn't an exit node, since without one of those being true, the node wouldn't have the correct AllowedIPs in WireGuard to allow a Docker container to connect to another Tailscale node anyway. Updates #12070 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: Idef538695f4d101b0ef6f3fb398c0eaafc3ae281	7 months ago
Andrew Dunham	25e32cc3ae	util/linuxfw: fix table name in DelStatefulRule Updates #12061 Follow-up to #12072 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I2ba8c4bff14d93816760ff5eaa1a16f17bad13c1	7 months ago
Maisem Ali	21abb7f402	cmd/tailscale: add missing set flags for linux We were missing `snat-subnet-routes`, `stateful-filtering` and `netfilter-mode`. Add those to set too. Fixes #12061 Signed-off-by: Maisem Ali <maisem@tailscale.com>	7 months ago
Anton Tolchanov	ac638f32c0	util/linuxfw: fix stateful packet filtering in nftables mode To match iptables: `b5dbf155b1/util/linuxfw/iptables_runner.go (L536)` Updates #12066 Signed-off-by: Anton Tolchanov <anton@tailscale.com>	7 months ago
Irbe Krumina	b5dbf155b1	cmd/k8s-operator: default nameserver image to tailscale/k8s-nameserver:unstable (#11991 ) We are now publishing nameserver images to tailscale/k8s-nameserver, so we can start defaulting the images if users haven't set them explicitly, same as we already do with proxy images. The nameserver images are currently only published for unstable track, so we have to use the static 'unstable' tag. Once we start publishing to stable, we can make the operator default to its own tag (because then we'll know that for each operator tag X there is also a nameserver tag X as we always cut all images for a given tag. Updates tailscale/tailscale#10499 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	7 months ago
Andrew Dunham	8f7f9ac17e	wgengine/netstack: handle 4via6 routes that are advertised by the same node Previously, a node that was advertising a 4via6 route wouldn't be able to make use of that same route; the packet would be delivered to Tailscale, but since we weren't accepting it in handleLocalPackets, the packet wouldn't be delivered to netstack and would never hit the 4via6 logic. Let's add that support so that usage of 4via6 is consistent regardless of where the connection is initiated from. Updates #11304 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: Ic28dc2e58080d76100d73b93360f4698605af7cb	7 months ago
Nick O'Neill	7901925ad3	VERSION.txt: this is v1.67.0 (#12063 ) Signed-off-by: Nick O'Neill <nick@tailscale.com>	7 months ago
Sonia Appasamy	8130656780	api.md: remove extraneous commas in json examples Updates #cleanup Signed-off-by: Sonia Appasamy <sonia@tailscale.com>	7 months ago
Anton Tolchanov	6f4a1dc6bf	ipn/ipnlocal: fix another read of keyExpired outside mutex Updates #12039 Signed-off-by: Anton Tolchanov <anton@tailscale.com>	7 months ago
Brad Fitzpatrick	e968b0ecd7	cmd/tailscale,controlclient,ipnlocal: fix 'up', deflake tests more The CLI's "up" is kinda chaotic and LocalBackend.Start is kinda chaotic and they both need to be redone/deleted (respectively), but this fixes some buggy behavior meanwhile. We were previously calling StartLoginInteractive (to start the controlclient's RegisterRequest) redundantly in some cases, causing test flakes depending on timing and up's weird state machine. We only need to call StartLoginInteractive in the client if Start itself doesn't. But Start doesn't tell us that. So cheat a bit and a put the information about whether there's a current NodeKey in the ipn.Status. It used to be accessible over LocalAPI via GetPrefs as a private key but we removed that for security. But a bool is fine. So then only call StartLoginInteractive if that bool is false and don't do it in the WatchIPNBus loop. Fixes #12028 Updates #12042 Change-Id: I0923c3f704a9d6afd825a858eb9a63ca7c1df294 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	7 months ago
Brad Fitzpatrick	e5ef35857f	ipn/ipnlocal: fix read of keyExpired outside mutex Fixes #12039 Change-Id: I28c8a282ce12619f17103e9535841f15394ce685 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	7 months ago
Brad Fitzpatrick	21509db121	ipn/ipnlocal, all: plumb health trackers in tests I saw some panics in CI, like: 2024-05-08T04:30:25.9553518Z ## WARNING: (non-fatal) nil health.Tracker (being strict in CI): 2024-05-08T04:30:25.9554043Z goroutine 801 [running]: 2024-05-08T04:30:25.9554489Z tailscale.com/health.(Tracker).nil(0x0) 2024-05-08T04:30:25.9555086Z tailscale.com/health/health.go:185 +0x70 2024-05-08T04:30:25.9555688Z tailscale.com/health.(Tracker).SetUDP4Unbound(0x0, 0x0) 2024-05-08T04:30:25.9556373Z tailscale.com/health/health.go:532 +0x2f 2024-05-08T04:30:25.9557296Z tailscale.com/wgengine/magicsock.(Conn).bindSocket(0xc0003b4808, 0xc0003b4878, {0x1fbca53, 0x4}, 0x0) 2024-05-08T04:30:25.9558301Z tailscale.com/wgengine/magicsock/magicsock.go:2481 +0x12c5 2024-05-08T04:30:25.9559026Z tailscale.com/wgengine/magicsock.(Conn).rebind(0xc0003b4808, 0x0) 2024-05-08T04:30:25.9559874Z tailscale.com/wgengine/magicsock/magicsock.go:2510 +0x16f 2024-05-08T04:30:25.9561038Z tailscale.com/wgengine/magicsock.NewConn({0xc000063c80, 0x0, 0xc000197930, 0xc000197950, 0xc000197960, {0x0, 0x0}, 0xc000197970, 0xc000198ee0, 0x0, ...}) 2024-05-08T04:30:25.9562402Z tailscale.com/wgengine/magicsock/magicsock.go:476 +0xd5f 2024-05-08T04:30:25.9563779Z tailscale.com/wgengine.NewUserspaceEngine(0xc000063c80, {{0x22c8750, 0xc0001976b0}, 0x0, {0x22c3210, 0xc000063c80}, {0x22c31d8, 0x2d3c900}, 0x0, 0x0, ...}) 2024-05-08T04:30:25.9564982Z tailscale.com/wgengine/userspace.go:389 +0x159d 2024-05-08T04:30:25.9565529Z tailscale.com/ipn/ipnlocal.newTestBackend(0xc000358b60) 2024-05-08T04:30:25.9566086Z tailscale.com/ipn/ipnlocal/serve_test.go:675 +0x2a5 2024-05-08T04:30:25.9566612Z ta Updates #11874 Change-Id: I3432ed52d670743e532be4642f38dbd6e3763b1b Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	7 months ago
Brad Fitzpatrick	727c0d6cfd	ipn/ipnserver: close a small race in ipnserver, ~simplify code There was a small window in ipnserver after we assigned a LocalBackend to the ipnserver's atomic but before we Start'ed it where our initalization Start could conflict with API calls from the LocalAPI. Simplify that a bit and lay out the rules in the docs. Updates #12028 Change-Id: Ic5f5e4861e26340599184e20e308e709edec68b1 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	7 months ago
Maisem Ali	32bc596062	ipn/ipnlocal: acquire b.mu once in Start We used to Lock, Unlock, Lock, Unlock quite a few times in Start resulting in all sorts of weird race conditions. Simplify it all and only Lock/Unlock once. Updates #11649 Signed-off-by: Maisem Ali <maisem@tailscale.com>	7 months ago
Maisem Ali	9380e2dfc6	ipn/ipnlocal: use lockAndGetUnlock in Start This removes one of the Lock,Unlock,Lock,Unlock at least in the Start function. Still has 3 more of these. Updates #11649 Signed-off-by: Maisem Ali <maisem@tailscale.com>	7 months ago
Maisem Ali	e1011f1387	ipn/ipnlocal: call SetNetInfoCallback from NewLocalBackend Instead of calling it from Start everytime, call it from NewLocalBackend once. Updates #11649 Signed-off-by: Maisem Ali <maisem@tailscale.com>	7 months ago
Maisem Ali	85b9a6c601	net/netcheck: do not add derps if IPv4/IPv6 is set to "none" It was documented as such but seems to have been dropped in a refactor, restore the behavior. This brings down the time it takes to run a single integration test by 2s which adds up quite a bit. Updates tailscale/corp#19786 Signed-off-by: Maisem Ali <maisem@tailscale.com>	7 months ago
Brad Fitzpatrick	d7bdd8e2a7	go.toolchain.rev: update to Go 1.22.3 Updates #12044 Change-Id: I4ad16f2bfcec13735cb10713e028b2c5527501ed Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	7 months ago
kari-ts	3c4c9dc1d2	web: use EditPrefs instead of passing UpdatePrefs to starting (#12040 ) Web version of https://github.com/tailscale/tailscale-android/pull/370 This allows us to update the prefs rather than creating new prefs Updates tailscale/tailscale#11731 Signed-off-by: kari-ts <kari@tailscale.com>	7 months ago
Brad Fitzpatrick	80df8ffb85	control/controlclient: early return and outdent some code I found this too hard to read before. This is pulled out of #12033 as it's unrelated cleanup in retrospect. Updates #12028 Change-Id: I727c47e573217e3d1973c5b66a76748139cf79ee Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	7 months ago
Andrew Lytvynov	471731771c	ipn/ipnlocal: set default NoStatefulFiltering in ipn.NewPrefs (#12031 ) This way the default gets populated on first start, when no existing state exists to migrate. Also fix `ipn.PrefsFromBytes` to preserve empty fields, rather than layering `NewPrefs` values on top. Updates https://github.com/tailscale/corp/issues/19623 Signed-off-by: Andrew Lytvynov <awly@tailscale.com>	7 months ago
Paul Scott	78fa698fe6	cmd/tailscale/cli/ffcomplete: remove fullstop from ShortHelp Updates #cleanup Signed-off-by: Paul Scott <paul@tailscale.com>	7 months ago
Maisem Ali	482890b9ed	tailcfg: bump capver for using NodeAttrUserDialUseRoutes for DNS Missed in `f62e678df8`. Updates tailscale/corp#18725 Updates #4529 Signed-off-by: Maisem Ali <maisem@tailscale.com>	7 months ago
Maisem Ali	af97e7a793	tailcfg,all: add/plumb Node.IsJailed This adds a new bool that can be sent down from control to do jailing on the client side. Previously this would only be done from control by modifying the packet filter we sent down to clients. This would result in a lot of additional work/CPU on control, we could instead just do this on the client. This has always been a TODO which we keep putting off, might as well do it now. Updates tailscale/corp#19623 Signed-off-by: Maisem Ali <maisem@tailscale.com>	7 months ago

... 2 3 4 5 6 ...

7759 Commits (5ec01bf3ce6c01841bfc6d17736b5b35df06d2a3) All Branches Search

7759 Commits (5ec01bf3ce6c01841bfc6d17736b5b35df06d2a3)

All Branches