88 Commits (5d4b4ffc3c16e1d7a4101de9105b081d69188a12)

Author	SHA1	Message	Date
Brad Fitzpatrick	7c1d6e35a5	all: use Go 1.22 range-over-int ... Updates #11058 Change-Id: I35e7ef9b90e83cac04ca93fd964ad00ed5b48430 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	7 months ago
Brad Fitzpatrick	a36cfb4d3d	tailcfg, ipn/ipnlocal, wgengine/magicsock: add only-tcp-443 node attr ... Updates tailscale/corp#17879 Change-Id: I0dc305d147b76c409cf729b599a94fa723aef0e0 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	8 months ago
Andrew Dunham	fd94d96e2b	net/portmapper: support legacy "urn:dslforum-org" portmapping services ... These are functionally the same as the "urn:schemas-upnp-org" services with a few minor changes, and are still used by older devices. Support them to improve our ability to obtain an external IP on such networks. Updates #10911 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I05501fad9d6f0a3b8cf19fc95eee80e7d16cc2cf	10 months ago
Andrew Dunham	b45089ad85	net/portmapper: handle cases where we have no supported clients ... This no longer results in a nil pointer exception when we get a valid UPnP response with no supported clients. Updates #10911 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I6e3715a49a193ff5261013871ad7fff197a4d77e	10 months ago
Andrew Dunham	fa3639783c	net/portmapper: check returned epoch from PMP and PCP protocols ... If the epoch that we see during a Probe is less than the existing epoch, it means that the gateway has either restarted or reset its configuration, and an existing mapping is no longer valid. Reset any saved mapping(s) if we detect this case so that a future createOrGetMapping will not attempt to re-use it. Updates #10597 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: Ie3cddaf625cb94a29885f7a1eeea25dbf6b97b47	11 months ago
Andrew Lytvynov	1302bd1181	all: cleanup unused code, part 1 (#10661) ... Run `staticcheck` with `U1000` to find unused code. This cleans up about a half of it. I'll do the other half separately to keep PRs manageable. Updates #cleanup Signed-off-by: Andrew Lytvynov <awly@tailscale.com>	11 months ago
Andrew Dunham	3c333f6341	net/portmapper: add logs about obtained mapping(s) ... This logs additional information about what mapping(s) are obtained during the creation process, including whether we return an existing cached mapping. Updates #10597 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I9ff25071f064c91691db9ab0b9365ccc5f948d6e	11 months ago
Andrew Dunham	d05a572db4	net/portmapper: handle multiple UPnP discovery responses ... Instead of taking the first UPnP response we receive and using that to create port mappings, store all received UPnP responses, sort and deduplicate them, and then try all of them to obtain an external address. Updates #10602 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I783ccb1834834ee2a9ecbae2b16d801f2354302f	11 months ago
Andrew Dunham	bac4890467	net/portmapper: be smarter about selecting a UPnP device ... Previously, we would select the first WANIPConnection2 (and related) client from the root device, without any additional checks. However, some routers expose multiple UPnP devices in various states, and simply picking the first available one can result in attempting to perform a portmap with a device that isn't functional. Instead, mimic what the miniupnpc code does, and prefer devices that are (a) reporting as Connected, and (b) have a valid external IP address. For our use-case, we additionally prefer devices that have an external IP address that's a public address, to increase the likelihood that we can obtain a direct connection from peers. Finally, we split out fetching the root device (getUPnPRootDevice) from selecting the best service within that root device (selectBestService), and add some extensive tests for various UPnP server behaviours. RELNOTE=Improve UPnP portmapping when multiple UPnP services exist Updates #8364 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I71795cd80be6214dfcef0fe83115a5e3fe4b8753	11 months ago
Denton Gentry	137e9f4c46	net/portmap: add test of Mikrotik Root Desc XML. ... Unfortunately in the test we can't reproduce the failure seen in the real system ("SOAP fault: UPnPError") Updates https://github.com/tailscale/tailscale/issues/8364 Signed-off-by: Denton Gentry <dgentry@tailscale.com>	12 months ago
Andrew Dunham	ef596aed9b	net/portmapper: avoid alloc in getUPnPErrorsMetric ... Updates #cleanup Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: Iea558024c038face24cc46584421998d10f13a66	1 year ago
Val	19e5f242e0	net/portmapper: convert UPnP metrics to new syncs.Map.LoadOrInit method ... Simplify UPnP error metrics by using the new syncs.Map.LoadOrInit method. Updates #cleanup Signed-off-by: Val <valerie@tailscale.com>	1 year ago
Andrew Dunham	d31460f793	net/portmapper: fix invalid UPnP metric name ... Fixes #9551 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I06f3a15a668be621675be6cbc7e5bdcc006e8570	1 year ago
Andrew Dunham	d9ae7d670e	net/portmapper: add clientmetric for UPnP error codes ... This should allow us to gather a bit more information about errors that we encounter when creating UPnP mappings. Since we don't have a "LabelMap" construction for clientmetrics, do what sockstats does and lazily register a new metric when we see a new code. Updates #9343 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: Ibb5aadd6138beb58721f98123debcc7273b611ba	1 year ago
Andrew Dunham	9ee173c256	net/portmapper: fall back to permanent UPnP leases if necessary ... Some routers don't support lease times for UPnP portmapping; let's fall back to adding a permanent lease in these cases. Additionally, add a proper end-to-end test case for the UPnP portmapping behaviour. Updates #9343 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I17dec600b0595a5bfc9b4d530aff6ee3109a8b12	1 year ago
Brad Fitzpatrick	4e91cf20a8	control/controlknobs, all: add plumbed Knobs type, not global variables ... Previously two tsnet nodes in the same process couldn't have disjoint sets of controlknob settings from control as both would overwrite each other's global variables. This plumbs a new controlknobs.Knobs type around everywhere and hangs the knobs sent by control on that instead. Updates #9351 Change-Id: I75338646d36813ed971b4ffad6f9a8b41ec91560 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Andrew Dunham	c86a610eb3	cmd/tailscale, net/portmapper: add --log-http option to "debug portmap" ... This option allows logging the raw HTTP requests and responses that the portmapper Client makes when using UPnP. This can be extremely helpful when debugging strange UPnP issues with users' devices, and might allow us to avoid having to instruct users to perform a packet capture. Updates #8992 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I2c3cf6930b09717028deaff31738484cc9b008e4	1 year ago
Andrew Dunham	77ff705545	net/portmapper: never select port 0 in UPnP ... Port 0 is interpreted, per the spec (but inconsistently among router software) as requesting to map every single available port on the UPnP gateway to the internal IP address. We'd previously avoided picking ports below 1024 for one of the two UPnP methods (in #7457), and this change moves that logic so that we avoid it in all cases. Updates #8992 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I20d652c0cd47a24aef27f75c81f78ae53cc3c71e	1 year ago
Mihai Parparita	7330aa593e	all: avoid repeated default interface lookups ... On some platforms (notably macOS and iOS) we look up the default interface to bind outgoing connections to. This is both duplicated work and results in logspam when the default interface is not available (i.e. when a phone has no connectivity, we log an error and thus cause more things that we will try to upload and fail). Fixed by passing around a netmon.Monitor to more places, so that we can use its cached interface state. Fixes #7850 Updates #7621 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	2 years ago
Andrew Dunham	280255acae	various: add golangci-lint, fix issues (#7905) ... This adds an initial and intentionally minimal configuration for golang-ci, fixes the issues reported, and adds a GitHub Action to check new pull requests against this linter configuration. Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I8f38fbc315836a19a094d0d3e986758b9313f163	2 years ago
Brad Fitzpatrick	10f1c90f4d	wgengine/magicsock, types/nettype, etc: finish ReadFromUDPAddrPort netip migration ... So we're staying within the netip.Addr/AddrPort consistently and avoiding allocs/conversions to the legacy net addr types. Updates #5162 Change-Id: I59feba60d3de39f773e68292d759766bac98c917 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Mihai Parparita	edb02b63f8	net/sockstats: pass in logger to sockstats.WithSockStats ... Using log.Printf may end up being printed out to the console, which is not desirable. I noticed this when I was investigating some client logs with `sockstats: trace "NetcheckClient" was overwritten by another`. That turns to be harmless/expected (the netcheck client will fall back to the DERP client in some cases, which does its own sockstats trace). However, the log output could be visible to users if running the `tailscale netcheck` CLI command, which would be needlessly confusing. Updates tailscale/corp#9230 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	2 years ago
Mihai Parparita	6ac6ddbb47	sockstats: switch label to enum ... Makes it cheaper/simpler to persist values, and encourages reuse of labels as opposed to generating an arbitrary number. Updates tailscale/corp#9230 Updates #3363 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	2 years ago
Andrew Dunham	f6cd24499b	net/portmapper: relax source port check for UPnP responses ... Per a packet capture provided, some gateways will reply to a UPnP discovery packet with a UDP packet with a source port that does not come from the UPnP port. Accept these packets with a log message. Updates #7377 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I5d4d5b2a0275009ed60f15c20b484fe2025d094b	2 years ago
Andrew Dunham	51eb0b2cb7	net/portmapper: send UPnP protocol in upper-case ... We were previously sending a lower-case "udp" protocol, whereas other implementations like miniupnp send an upper-case "UDP" protocol. For compatibility, use an upper-case protocol instead. Updates #7377 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I4aed204f94e4d51b7a256d29917af1536cb1b70f	2 years ago
Andrew Dunham	d379a25ae4	net/portmapper: don't pick external ports below 1024 ... Some devices don't let you UPnP portmap a port below 1024, so let's just avoid that range of ports entirely. Updates #7377 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: Ib7603b1c9a019162cdc4fa21744a2cae48bb1d86	2 years ago
Andrew Dunham	3f8e8b04fd	cmd/tailscale, cmd/tailscaled: move portmapper debugging into tailscale CLI ... The debug flag on tailscaled isn't available in the macOS App Store build, since we don't have a tailscaled binary; move it to the 'tailscale debug' CLI that is available on all platforms instead, accessed over LocalAPI. Updates #7377 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I47bffe4461e036fab577c2e51e173f4003592ff7	2 years ago
Mihai Parparita	9cb332f0e2	sockstats: instrument networking code paths ... Uses the hooks added by tailscale/go#45 to instrument the reads and writes on the major code paths that do network I/O in the client. The convention is to use "<package>.<type>:<label>" as the annotation for the responsible code path. Enabled on iOS, macOS and Android only, since mobile platforms are the ones we're most interested in, and we are less sensitive to any throughput degradation due to the per-I/O callback overhead (macOS is also enabled for ease of testing during development). For now just exposed as counters on a /v0/sockstats PeerAPI endpoint. We also keep track of the current interface so that we can break out the stats by interface. Updates tailscale/corp#9230 Updates #3363 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	2 years ago
Will Norris	947c14793a	all: update tools that manage copyright headers ... Update all code generation tools, and those that check for license headers to use the new standard header. Also update copyright statement in LICENSE file. Fixes #6865 Signed-off-by: Will Norris <will@tailscale.com>	2 years ago
Will Norris	71029cea2d	all: update copyright and license headers ... This updates all source files to use a new standard header for copyright and license declaration. Notably, copyright no longer includes a date, and we now use the standard SPDX-License-Identifier header. This commit was done almost entirely mechanically with perl, and then some minimal manual fixes. Updates #6865 Signed-off-by: Will Norris <will@tailscale.com>	2 years ago
Jordan Whited	25a0091f69	net/portmapper: relax handling of UPnP resp (#6946) ... Gateway devices operating as an HA pair w/VRRP or CARP may send UPnP replies from static addresses rather than the floating gateway address. This commit relaxes our source address verification such that we parse responses from non-gateway IPs, and re-point the UPnP root desc URL to the gateway IP. This ensures we are still interfacing with the gateway device (assuming L2 security intact), even though we got a root desc from a non-gateway address. This relaxed handling is required for ANY port mapping to work on certain OPNsense/pfsense distributions using CARP at the time of writing, as miniupnpd may only listen on the static, non-gateway interface address for PCP and PMP. Fixes #5502 Signed-off-by: Jordan Whited <jordan@tailscale.com>	2 years ago
Denton Gentry	b8fe89d15f	net/portmapper: add test for Huawei router ... Updates https://github.com/tailscale/tailscale/issues/6320 Signed-off-by: Denton Gentry <dgentry@tailscale.com>	2 years ago
Brad Fitzpatrick	da8def8e13	all: remove old +build tags ... The //go:build syntax was introduced in Go 1.17: https://go.dev/doc/go1.17#build-lines gofmt has kept the +build and go:build lines in sync since then, but enough time has passed. Time to remove them. Done with: perl -i -npe 's,^// \+build.*\n,,' $(git grep -l -F '+build') Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Josh Soref	d4811f11a0	all: fix spelling mistakes ... Signed-off-by: Josh Soref <2119212+jsoref@users.noreply.github.com>	2 years ago
Brad Fitzpatrick	4950fe60bd	syncs, all: move to using Go's new atomic types instead of ours ... Fixes #5185 Change-Id: I850dd532559af78c3895e2924f8237ccc328449d Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	5381437664	logtail, net/portmapper, wgengine/magicsock: use fmt.Appendf ... Fixes #5206 Change-Id: I490bb92e774ce7c044040537e2cd864fcf1dbe5a Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	5f6abcfa6f	all: migrate code from netaddr.FromStdAddr to Go 1.18 ... With caveat https://github.com/golang/go/issues/53607#issuecomment-1203466984 that then requires a new wrapper. But a simpler one at least. Updates #5162 Change-Id: I0a5265065bfcd7f21e8dd65b2bd74cae90d76090 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	8725b14056	all: migrate more code code to net/netip directly ... Instead of going through the tailscale.com/net/netaddr transitional wrappers. Updates #5162 Change-Id: I3dafd1c2effa1a6caa9b7151ecf6edd1a3fda3dd Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	a12aad6b47	all: convert more code to use net/netip directly ... perl -i -npe 's,netaddr.IPPrefixFrom,netip.PrefixFrom,' $(git grep -l -F netaddr.) perl -i -npe 's,netaddr.IPPortFrom,netip.AddrPortFrom,' $(git grep -l -F netaddr. ) perl -i -npe 's,netaddr.IPPrefix,netip.Prefix,g' $(git grep -l -F netaddr. ) perl -i -npe 's,netaddr.IPPort,netip.AddrPort,g' $(git grep -l -F netaddr. ) perl -i -npe 's,netaddr.IP\b,netip.Addr,g' $(git grep -l -F netaddr. ) perl -i -npe 's,netaddr.IPv6Raw\b,netip.AddrFrom16,g' $(git grep -l -F netaddr. ) goimports -w . Then delete some stuff from the net/netaddr shim package which is no longer neeed. Updates #5162 Change-Id: Ia7a86893fe21c7e3ee1ec823e8aba288d4566cd8 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	6a396731eb	all: use various net/netip parse funcs directly ... Mechanical change with perl+goimports. Changed {Must,}Parse{IP,IPPrefix,IPPort} to their netip variants, then goimports -d . Finally, removed the net/netaddr wrappers, to prevent future use. Updates #5162 Change-Id: I59c0e38b5fbca5a935d701645789cddf3d7863ad Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	7eaf5e509f	net/netaddr: start migrating to net/netip via new netaddr adapter package ... Updates #5162 Change-Id: Id7bdec303b25471f69d542f8ce43805328d56c12 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Denton Gentry	d7f452c0a1	net/portmapper: send discovery packet for IGD specifically. ... There appear to be devices out there which send only their first descriptor in response to a discovery packet for `ssdp:all`, for example the Sagemcom FAST3890V3 only sends urn:schemas-wifialliance-org:device:WFADevice:1 Send both ssdp:all and a discovery frame for InternetGatewayDevice specifically. Updates https://github.com/tailscale/tailscale/issues/3557 Signed-off-by: Denton Gentry <dgentry@tailscale.com>	2 years ago
Denton Gentry	09eaba91ad	net/portmap: add a test for Sagemcom FAST3890V3. ... Updates https://github.com/tailscale/tailscale/issues/3557 Signed-off-by: Denton Gentry <dgentry@tailscale.com>	2 years ago
Denton Gentry	b5553c6ad2	net/portmap: run go fmt ... Signed-off-by: Denton Gentry <dgentry@tailscale.com>	2 years ago
Denton Gentry	de4c635e54	net/portmapper: make pcpCodeNotAuthorized log more descriptive ... If PCP is present but disabled, turning it on might help get direct connections. Signed-off-by: Denton Gentry <dgentry@tailscale.com>	2 years ago
Denton Gentry	7fffddce8e	net/portmapper: enable for iOS ... In the 1.27 unstable releases we set the min-version to iOS15, which means we have 50 MBytes of RAM in the Network Extension. https://tailscale.com/blog/go-linker/ Include the UPnP/NAT-PMP/PCP portmapper support now that there is memory for it. Fixes https://github.com/tailscale/tailscale/issues/2495 Signed-off-by: Denton Gentry <dgentry@tailscale.com>	2 years ago
Mihai Parparita	27a1ad6a70	wasm: exclude code that's not used on iOS for Wasm too ... It has similar size constraints. Saves ~1.9MB from the Wasm build. Updates #3157 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	2 years ago
Josh Bleecher Snyder	0868329936	all: use any instead of interface{} ... My favorite part of generics. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Brad Fitzpatrick	7d9b1de3aa	netcheck,portmapper,magicsock: ignore some UDP write errors on Linux ... Treat UDP send EPERM errors as a lost UDP packet, not something super fatal. That's just the Linux firewall preventing it from going out. And add a leaf package net/neterror for that (and future) policy that all three packages can share, with tests. Updates #3619 Change-Id: Ibdb838c43ee9efe70f4f25f7fc7fdf4607ba9c1d Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Josh Bleecher Snyder	2075c39fd7	net/portmapper: deflake TestPCPIntegration ... Logging in goroutines after the test completed caused data races and panics. Prevent that. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago