tailscale

Commit Graph

Author	SHA1	Message	Date
Andrew Dunham	bcf7b63d7e	wgengine/magicsock: add hysteresis to endpoint selection Avoid selecting an endpoint as "better" than the current endpoint if the total latency improvement is less than 1%. This adds some hysteresis to avoid flapping between endpoints for a minimal improvement in latency. Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: If8312e1768ea65c4b4d4e13d8de284b3825d7a73	2 years ago
Mihai Parparita	7330aa593e	all: avoid repeated default interface lookups On some platforms (notably macOS and iOS) we look up the default interface to bind outgoing connections to. This is both duplicated work and results in logspam when the default interface is not available (i.e. when a phone has no connectivity, we log an error and thus cause more things that we will try to upload and fail). Fixed by passing around a netmon.Monitor to more places, so that we can use its cached interface state. Fixes #7850 Updates #7621 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	2 years ago
Mihai Parparita	4722f7e322	all: move network monitoring from wgengine/monitor to net/netmon We're using it in more and more places, and it's not really specific to our use of Wireguard (and does more just link/interface monitoring). Also removes the separate interface we had for it in sockstats -- it's a small enough package (we already pull in all of its dependencies via other paths) that it's not worth the extra complexity. Updates #7621 Updates #7850 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	2 years ago
Andrew Dunham	f85dc6f97c	ci: add more lints (#7909 ) This is a follow-up to #7905 that adds two more linters and fixes the corresponding findings. As per the previous PR, this only flags things that are "obviously" wrong, and fixes the issues found. Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I8739bdb7bc4f75666a7385a7a26d56ec13741b7c	2 years ago
Andrew Dunham	80b138f0df	wgengine/magicsock: keep advertising endpoints after we stop discovering them Previously, when updating endpoints we would immediately stop advertising any endpoint that wasn't discovered during determineEndpoints. This could result in, for example, a case where we performed an incremental netcheck, didn't get any of our three STUN packets back, and then dropped our STUN endpoint from the set of advertised endpoints... which would result in clients falling back to a DERP connection until the next call to determineEndpoints. Instead, let's cache endpoints that we've discovered and continue reporting them to clients until a timeout expires. In the above case where we temporarily don't have a discovered STUN endpoint, we would continue reporting the old value, then re-discover the STUN endpoint again and continue reporting it as normal, so clients never see a withdrawal. Updates tailscale/coral#108 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I42de72e7418ab328a6c732bdefc74549708cf8b9	2 years ago
Brad Fitzpatrick	4b49ca4a12	wgengine/magicsock: update comments on what implements conn.Bind The comment still said *magicsock.Conn implemented wireguard-go conn.Bind. That wasn't accurate anymore. A doc #cleanup. Change-Id: I7fd003b939497889cc81147bfb937b93e4f6865c Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	10f1c90f4d	wgengine/magicsock, types/nettype, etc: finish ReadFromUDPAddrPort netip migration So we're staying within the netip.Addr/AddrPort consistently and avoiding allocs/conversions to the legacy net addr types. Updates #5162 Change-Id: I59feba60d3de39f773e68292d759766bac98c917 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	29f7df9d8f	wgengine/magicsock, etc: remove mostly unused WriteTo methods Updates #2331 Updates #5162 Change-Id: I8291884425481eeaedde38a54adfd8ed7292a497 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	6866aaeab3	wgengine/magicsock: factor out receiveIPv4 & receiveIPv6 common code Updates #2331 Change-Id: I801df38b217f5d17203e8dc3b8654f44747e0f4b Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Andrew Dunham	228d0c6aea	net/netcheck: use dnscache.Resolver when resolving DERP IPs This also adds a bunch of tests for this function to ensure that we're returning the proper IP(s) in all cases. Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I0d9d57170dbab5f2bf07abdf78ecd17e0e635399	2 years ago
Mihai Parparita	edb02b63f8	net/sockstats: pass in logger to sockstats.WithSockStats Using log.Printf may end up being printed out to the console, which is not desirable. I noticed this when I was investigating some client logs with `sockstats: trace "NetcheckClient" was overwritten by another`. That turns to be harmless/expected (the netcheck client will fall back to the DERP client in some cases, which does its own sockstats trace). However, the log output could be visible to users if running the `tailscale netcheck` CLI command, which would be needlessly confusing. Updates tailscale/corp#9230 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	2 years ago
James Tucker	e09c434e5d	wgengine/magicsock: remove locking sync requirements on conn disco keys The lazy initialization of the disco key is not necessary, and contributes to unnecessary locking and state checking. Updates #cleanup Signed-off-by: James Tucker <james@tailscale.com>	2 years ago
James Tucker	e1b71c83ac	wgengine/magicsock: remove unused fields on discoInfo Updates #cleanup Signed-off-by: James Tucker <james@tailscale.com>	2 years ago
James Tucker	a257b2f88b	wgengine/magicsock: add immutability documentation to endpointDisco Updates #7825 Signed-off-by: James Tucker <james@tailscale.com>	2 years ago
Charlotte Brandhorst-Satzkorn	c573bef0aa	tailcfg,wgengine: add initial support for WireGuard only peers A peer can have IsWireGuardOnly, which means it will not support DERP or Disco, and it must have Endpoints filled in order to be usable. In the present implementation only the first Endpoint will be used as the bestAddr. Updates tailscale/corp#10351 Co-authored-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com> Co-authored-by: James Tucker <james@tailscale.com> Signed-off-by: James Tucker <james@tailscale.com>	2 years ago
James Tucker	6cfcb3cae4	wgengine/magicsock: fix synchronization of endpoint disco fields Identified in review in #7821 endpoint.discoKey and endpoint.discoShort are often accessed without first taking endpoint.mu. The arrangement with endpoint.mu is inconvenient for a good number of those call-sites, so it is instead replaced with an atomic pointer to carry both pieces of disco info. This will also help with #7821 that wants to add explicit checks/guards to disable disco behaviors when disco keys are missing which is necessarily implicitly mostly covered by this change. Updates #7821 Signed-off-by: James Tucker <james@tailscale.com>	2 years ago
Tom DNetto	6a627e5a33	net, wgengine/capture: encode NAT addresses in pcap stream Signed-off-by: Tom DNetto <tom@tailscale.com>	2 years ago
valscale	7bfb7744b7	derp,magicsock: add debug envknobs for HTTP and derp server name (#7744 ) Make developing derp easier by: 1. Creating an envknob telling clients to use HTTP to connect to derp servers, so devs don't have to acquire a valid TLS cert. 2. Creating an envknob telling clients which derp server to connect to, so devs don't have to edit the ACLs in the admin console to add a custom DERP map. 3. Explaining how the -dev and -a command lines args to derper interact. To use this: 1. Run derper with -dev. 2. Run tailscaled with TS_DEBUG_USE_DERP_HTTP=1 and TS_DEBUG_USE_DERP_ADDR=localhost This will result in the client connecting to derp via HTTP on port 3340. Fixes #7700 Signed-off-by: Val <valerie@tailscale.com>	2 years ago
Jordan Whited	f475e5550c	net/neterror, wgengine/magicsock: use UDP GSO and GRO on Linux (#7791 ) This commit implements UDP offloading for Linux. GSO size is passed to and from the kernel via socket control messages. Support is probed at runtime. UDP GSO is dependent on checksum offload support on the egress netdev. UDP GSO will be disabled in the event sendmmsg() returns EIO, which is a strong signal that the egress netdev does not support checksum offload. Updates tailscale/corp#8734 Signed-off-by: Jordan Whited <jordan@tailscale.com>	2 years ago
Andrew Dunham	8d3acc9235	util/sysresources, magicsock: scale DERP buffer based on system memory This adds the util/sysresources package, which currently only contains a function to return the total memory size of the current system. Then, we modify magicsock to scale the number of buffered DERP messages based on the system's available memory, ensuring that we never use a value lower than the previous constant of 32. Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: Ib763c877de4d0d4ee88869078e7d512f6a3a148d	2 years ago
Jordan Whited	27e37cf9b3	go.mod, net/tstun, wgengine/magicsock: update wireguard-go (#7712 ) This commit updates the wireguard-go dependency to pull in fixes for the tun package, specifically 052af4a and aad7fca. Signed-off-by: Jordan Whited <jordan@tailscale.com>	2 years ago
valscale	74eb99aed1	derp, derphttp, magicsock: send new unknown peer frame when destination is unknown (#7552 ) * wgengine/magicsock: add envknob to send CallMeMaybe to non-existent peer For testing older client version responses to the PeerGone packet format change. Updates #4326 Signed-off-by: Val <valerie@tailscale.com> * derp: remove dead sclient struct member replaceLimiter Leftover from an previous solution to the duplicate client problem. Updates #2751 Signed-off-by: Val <valerie@tailscale.com> * derp, derp/derphttp, wgengine/magicsock: add new PeerGone message type Not Here Extend the PeerGone message type by adding a reason byte. Send a PeerGone "Not Here" message when an endpoint sends a disco message to a peer that this server has no record of. Fixes #4326 Signed-off-by: Val <valerie@tailscale.com> --------- Signed-off-by: Val <valerie@tailscale.com>	2 years ago
Andrew Dunham	be107f92d3	wgengine/magicsock: track per-endpoint changes in ringbuffer This change adds a ringbuffer to each magicsock endpoint that keeps a fixed set of "changes"–debug information about what updates have been made to that endpoint. Additionally, this adds a LocalAPI endpoint and associated "debug peer-status" CLI subcommand to fetch the set of changes for a given IP or hostname. Updates tailscale/corp#9364 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I34f726a71bddd0dfa36ec05ebafffb24f6e0516a	2 years ago
Mihai Parparita	6ac6ddbb47	sockstats: switch label to enum Makes it cheaper/simpler to persist values, and encourages reuse of labels as opposed to generating an arbitrary number. Updates tailscale/corp#9230 Updates #3363 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	2 years ago
Andrew Dunham	3f8e8b04fd	cmd/tailscale, cmd/tailscaled: move portmapper debugging into tailscale CLI The debug flag on tailscaled isn't available in the macOS App Store build, since we don't have a tailscaled binary; move it to the 'tailscale debug' CLI that is available on all platforms instead, accessed over LocalAPI. Updates #7377 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I47bffe4461e036fab577c2e51e173f4003592ff7	2 years ago
Mihai Parparita	9cb332f0e2	sockstats: instrument networking code paths Uses the hooks added by tailscale/go#45 to instrument the reads and writes on the major code paths that do network I/O in the client. The convention is to use "<package>.<type>:<label>" as the annotation for the responsible code path. Enabled on iOS, macOS and Android only, since mobile platforms are the ones we're most interested in, and we are less sensitive to any throughput degradation due to the per-I/O callback overhead (macOS is also enabled for ease of testing during development). For now just exposed as counters on a /v0/sockstats PeerAPI endpoint. We also keep track of the current interface so that we can break out the stats by interface. Updates tailscale/corp#9230 Updates #3363 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	2 years ago
Denton Gentry	fdc2018d67	wgengine/magicsock: remove superfluous "discokey" from log The stringification of the discokey type now prepends "discokey:" Fixes https://github.com/tailscale/tailscale/issues/3074 Signed-off-by: Denton Gentry <dgentry@tailscale.com>	2 years ago
Tom DNetto	2ca6dd1f1d	wgengine: start logging DISCO frames to pcap stream Signed-off-by: Tom DNetto <tom@tailscale.com>	2 years ago
Andrew Dunham	7393ce5e4f	wgengine/magicsock: add envknob to print information about port selection To aid in debugging where a customer has static port-forwards set up and there are issues establishing a connection through that port. Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: Ic5558bcdb40c9119b83f79dcacf2233b07777f2a	2 years ago
Jordan Whited	39e52c4b0a	wgengine/magicsock: fix de-dup disco ping handling for netmap endpoints (#7118 ) Fixes #7116 Signed-off-by: Jordan Whited <jordan@tailscale.com>	2 years ago
Jordan Whited	7921198c05	wgengine/magicsock: de-dup disco pings (#7093 ) Fixes #7078 Signed-off-by: Jordan Whited <jordan@tailscale.com>	2 years ago
Will Norris	947c14793a	all: update tools that manage copyright headers Update all code generation tools, and those that check for license headers to use the new standard header. Also update copyright statement in LICENSE file. Fixes #6865 Signed-off-by: Will Norris <will@tailscale.com>	2 years ago
Will Norris	71029cea2d	all: update copyright and license headers This updates all source files to use a new standard header for copyright and license declaration. Notably, copyright no longer includes a date, and we now use the standard SPDX-License-Identifier header. This commit was done almost entirely mechanically with perl, and then some minimal manual fixes. Updates #6865 Signed-off-by: Will Norris <will@tailscale.com>	2 years ago
Brad Fitzpatrick	d8feeeee4c	wgengine/magicsock: fix buggy fast path in Conn.SetNetworkMap Spotted by Maisem. Fixes #6680 Change-Id: I5fdc01de8b006a1c43a2a4848f69397f54b4453a Co-authored-By: Maisem Ali <maisem@tailscale.com> Co-authored-By: Andrew Dunham <andrew@tailscale.com> Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Jordan Whited	fec888581a	wgengine/magicsock: retry failed single packet ops across rebinds (#6990 ) The single packet WriteTo() through RebindingUDPConn.WriteBatch() was not checking for a rebind between loading the PacketConn and writing to it. Same with ReadFrom()/ReadBatch(). Fixes #6989 Signed-off-by: Jordan Whited <jordan@tailscale.com>	2 years ago
Brad Fitzpatrick	2df38b1feb	wgengine/magicsock: quiet log flood at tailscaled shutdown When you hit control-C on a tailscaled (notably in dev mode, but also on any systemctl stop/restart), there is a flood of messages like: magicsock: doing cleanup for discovery key d:aa9c92321db0807f magicsock: doing cleanup for discovery key d:bb0f16aacadbfd46 magicsock: doing cleanup for discovery key d:b5b2d386296536f2 magicsock: doing cleanup for discovery key d:3b640649f6796c91 magicsock: doing cleanup for discovery key d:71d7b1afbcce52cd magicsock: doing cleanup for discovery key d:315b61d7e0111377 magicsock: doing cleanup for discovery key d:9301f63dce69bf45 magicsock: doing cleanup for discovery key d:376141884d6fe072 .... It can be hundreds or even tens of thousands. So don't do that. Not a useful log message during shutdown. Change-Id: I029a8510741023f740877df28adff778246c18e5 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Andrew Dunham	11ce5b7e57	ipn/ipnlocal, wgengine/magicsock: check Expired bool on Node; print error in Ping Change-Id: Ic5f533f175a6e1bb73d4957d8c3f970add42e82e Signed-off-by: Andrew Dunham <andrew@du.nham.ca>	2 years ago
Brad Fitzpatrick	be10b529ec	wgengine/magicsock: add TS_DISCO_PONG_IPV4_DELAY knob to bias IPv6 paths Fixes #6818 Change-Id: I71597a045c5b4117af69fba869cb616271c0dfe1 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	2eff9c8277	wgengine/magicsock: avoid ReadBatch/WriteBatch on old Linux kernels Fixes #6807 Change-Id: I161424ef8a7338e1941d5e43d72dc6529993a0e3 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	0f604923d3	ipn/ipnlocal: fix StatusWithoutPeers not populating parts of Status Fixes #4311 Change-Id: Iaae0615148fa7154f4ef8f66b455e3a6c2fa9df3 Co-authored-by: Claire Wang <claire@tailscale.com> Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	44be59c15a	wgengine/magicsock: fix panic in wireguard-go rate limiting path Fixes #6686 Change-Id: I1055a87141b07261afed8e36c963a69f3be26088 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Jordan Whited	ea5ee6f87c	all: update golang.zx2c4.com/wireguard to github.com/tailscale/wireguard-go (#6692 ) This is temporary while we work to upstream performance work in https://github.com/WireGuard/wireguard-go/pull/64. A replace directive is less ideal as it breaks dependent code without duplication of the directive. Signed-off-by: Jordan Whited <jordan@tailscale.com>	2 years ago
Jordan Whited	76389d8baf	net/tstun, wgengine/magicsock: enable vectorized I/O on Linux (#6663 ) This commit updates the wireguard-go dependency and implements the necessary changes to the tun.Device and conn.Bind implementations to support passing vectors of packets in tailscaled. This significantly improves throughput performance on Linux. Updates #414 Signed-off-by: Jordan Whited <jordan@tailscale.com> Signed-off-by: James Tucker <james@tailscale.com> Co-authored-by: James Tucker <james@tailscale.com>	2 years ago
Mihai Parparita	bdc45b9066	wgengine/magicsock: fix panic when rebinding fails We would replace the existing real implementation of nettype.PacketConn with a blockForeverConn, but that violates the contract of atomic.Value (where the type cannot change). Fix by switching to a pointer value (atomic.Pointer[nettype.PacketConn]). A longstanding issue, but became more prevalent when we started binding connections to interfaces on macOS and iOS (#6566), which could lead to the bind call failing if the interface was no longer available. Fixes #6641 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	2 years ago
Joe Tsai	2e5d08ec4f	net/connstats: invert network logging data flow (#6272 ) Previously, tstun.Wrapper and magicsock.Conn managed their own statistics data structure and relied on an external call to Extract to extract (and reset) the statistics. This makes it difficult to ensure a maximum size on the statistics as the caller has no introspection into whether the number of unique connections is getting too large. Invert the control flow such that a connstats.Statistics is registered with tstun.Wrapper and magicsock.Conn. Methods on non-nil connstats.Statistics are called for every packet. This allows the implementation of connstats.Statistics (in the future) to better control when it needs to flush to ensure bounds on maximum sizes. The value registered into tstun.Wrapper and magicsock.Conn could be an interface, but that has two performance detriments: 1. Method calls on interface values are more expensive since they must go through a virtual method dispatch. 2. The implementation would need a sync.Mutex to protect the statistics value instead of using an atomic.Pointer. Given that methods on constats.Statistics are called for every packet, we want reduce the CPU cost on this hot path. Signed-off-by: Joe Tsai <joetsai@digital-static.net>	2 years ago
Brad Fitzpatrick	3a168cc1ff	wgengine/magicsock: ignore pre-disco (pre-0.100) peers There aren't any in the wild, other than one we ran on purpose to keep us honest, but we can bump that one forward to 0.100. Change-Id: I129e70724b2d3f8edf3b496dc01eba3ac5a2a907 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
phirework	a011320370	magicsock: cleanup canp2p (#6391 ) This renames canP2P in magicsock to canP2PLocked to reflect expectation of mutex lock, fixes a race we discovered in the meantime, and updates the current stats. Co-authored-by: Brad Fitzpatrick <bradfitz@tailscale.com> Signed-off-by: Jenny Zhang <jz@tailscale.com>	2 years ago
Joe Tsai	81fd259133	wgengine/magicsock: gather physical-layer statistics (#5925 ) There is utility in logging traffic statistics that occurs at the physical layer. That is, in order to send packets virtually to a particular tailscale IP address, what physical endpoints did we need to communicate with? This functionality logs IP addresses identical to what had always been logged in magicsock prior to #5823, so there is no increase in PII being logged. ExtractStatistics returns a mapping of connections to counts. The source is always a Tailscale IP address (without port), while the destination is some endpoint reachable on WAN or LAN. As a special case, traffic routed through DERP will use 127.3.3.40 as the destination address with the port being the DERP region. This entire feature is only enabled if data-plane audit logging is enabled on the tailnet (by default it is disabled). Example of type of information logged: ------------------------------------ Tx[P/s] Tx[B/s] Rx[P/s] Rx[B/s] PhysicalTraffic: 25.80 3.39Ki 38.80 5.57Ki 100.1.2.3 -> 143.11.22.33:41641 15.40 2.00Ki 23.20 3.37Ki 100.4.5.6 -> 192.168.0.100:41641 10.20 1.38Ki 15.60 2.20Ki 100.7.8.9 -> 127.3.3.40:2 0.20 6.40 0.00 0.00 Signed-off-by: Joe Tsai <joetsai@digital-static.net>	2 years ago
Andrew Dunham	74693793be	net/netcheck, tailcfg: track whether OS supports IPv6 We had previously added this to the netcheck report in #5087 but never copied it into the NetInfo struct. Additionally, add it to log lines so it's visible to support. Change-Id: Ib6266f7c6aeb2eb2a28922aeafd950fe1bf5627e Signed-off-by: Andrew Dunham <andrew@tailscale.com>	2 years ago
phirework	d13c9cdfb4	wgengine/magicsock: set up pathfinder (#5994 ) Sets up new file for separate silent disco goroutine, tentatively named pathfinder for now. Updates #540 Co-authored-by: Brad Fitzpatrick <bradfitz@tailscale.com> Signed-off-by: Jenny Zhang <jz@tailscale.com>	2 years ago
Brad Fitzpatrick	deac82231c	wgengine/magicsock: add start of alternate send path During development of silent disco (#540), an alternate send policy for magicsock that doesn't wake up the radio frequently with heartbeats, we want the old & new policies to coexist, like we did previously pre- and post-disco. We started to do that earlier in `5c42990c2f` but only set up the env+control knob plumbing to set a bool about which path should be used. This starts to add a way for the silent disco code to update the send path from a separate goroutine. (Part of the effort is going to de-state-machinify the event based soup that is the current disco code and make it more Go synchronous style.) So far this does nothing. (It does add an atomic load on each send but that should be noise in the grand scheme of things, and a even more rare atomic store of nil on node config changes.) Baby steps. Updates #540 Co-authored-by: Jenny Zhang <jz@tailscale.com> Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Joe Tsai	14100c0985	wgengine/magicsock: restore allocation-free endpoint.DstToString (#5971 ) The wireguard-go code unfortunately calls this unconditionally even when verbose logging is disabled. Partial revert of #5911. Signed-off-by: Joe Tsai <joetsai@digital-static.net>	2 years ago
Joe Tsai	9ee3df02ee	wgengine/magicsock: remove endpoint.wgEndpoint (#5911 ) This field seems seldom used and the documentation is wrong. It is simpler to just derive its original value dynamically when endpoint.DstToString is called. This method is potentially used by wireguard-go, but not in any code path is performance sensitive. All calls to it use it in conjunction with fmt.Printf, which is going to be slow anyways since it uses Go reflection. Signed-off-by: Joe Tsai <joetsai@digital-static.net>	2 years ago
James Tucker	539c073cf0	wgengine/magicsock: set UDP socket buffer sizes to 7MB - At high data rates more buffer space is required in order to avoid packet loss during any cause of delay. - On slower machines more buffer space is required in order to avoid packet loss while decryption & tun writing is underway. - On higher latency network paths more buffer space is required in order to overcome BDP. - On Linux set with SO_*BUFFORCE to bypass net.core.{r,w}mem_max. - 7MB is the current default maximum on macOS 12.6 - Windows test is omitted, as Windows does not support getsockopt for these options. Signed-off-by: James Tucker <james@tailscale.com>	2 years ago
Brad Fitzpatrick	1841d0bf98	wgengine/magicsock: make debug-level stuff not logged by default And add a CLI/localapi and c2n mechanism to enable it for a fixed amount of time. Updates #1548 Change-Id: I71674aaf959a9c6761ff33bbf4a417ffd42195a7 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Josh Soref	d4811f11a0	all: fix spelling mistakes Signed-off-by: Josh Soref <2119212+jsoref@users.noreply.github.com>	2 years ago
Kyle Carberry	91794f6498	wgengine/magicsock: move firstDerp check after nil derpMap check This fixes a race condition which caused `c.muCond.Broadcast()` to never fire in the `firstDerp` if block. It resulted in `Close()` hanging forever. Signed-off-by: Kyle Carberry <kyle@carberry.com>	2 years ago
Brad Fitzpatrick	832031d54b	wgengine/magicsock: fix recently introduced data race From `5c42990c2f`, not yet released in a stable build. Caught by existing tests. Fixes #5685 Change-Id: Ia76bb328809d9644e8b96910767facf627830600 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
phirework	5c42990c2f	wgengine/magicsock: add client flag and envknob to disable heartbeat (#5638 ) Baby steps towards turning off heartbeat pings entirely as per #540. This doesn't change any current magicsock functionality and requires additional changes to send/disco paths before the flag can be turned on. Updates #540 Change-Id: Idc9a72748e74145b068d67e6dd4a4ffe3932efd0 Signed-off-by: Jenny Zhang <jz@tailscale.com> Signed-off-by: Jenny Zhang <jz@tailscale.com>	2 years ago
Brad Fitzpatrick	74674b110d	envknob: support changing envknobs post-init Updates #5114 Change-Id: Ia423fc7486e1b3f3180a26308278be0086fae49b Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
James Tucker	672c2c8de8	wgengine/magicsock: add filter to ignore disco to old/other ports Incoming disco packets are now dropped unless they match one of the current bound ports, or have a zero port. The BPF filter passes all packets with a disco header to the raw packet sockets regardless of destination port (in order to avoid needing to reconfigure BPF on rebind). If a BPF enabled node has just rebound, due to restart or rebind, it may receive and reply to disco ping packets destined for ports other than those which are presently bound. If the pong is accepted, the pinging node will now assume that it can send WireGuard traffic to the pinged port - such traffic will not reach the node as it is not destined for a bound port. The zero port is ignored, if received. This is a speculative defense and would indicate a problem in the receive path, or the BPF filter. This condition is allowed to pass as it may enable traffic to flow, however it will also enable problems with the same symptoms this patch otherwise fixes. Fixes #5536 Signed-off-by: James Tucker <james@tailscale.com>	2 years ago
James Tucker	be140add75	wgengine/magicsock: fix regression in initial bind for js `1f959edeb0` introduced a regression for JS where the initial bind no longer occurred at all for JS. The condition is moved deeper in the call tree to avoid proliferation of higher level conditions. Updates #5537 Signed-off-by: James Tucker <james@tailscale.com>	2 years ago
James Tucker	1f959edeb0	wgengine/magicksock: remove nullability of RebindingUDPConns Both RebindingUDPConns now always exist. the initial bind (which now just calls rebind) now ensures that bind is called for both, such that they both at least contain a blockForeverConn. Calling code no longer needs to assert their state. Signed-off-by: James Tucker <james@tailscale.com>	2 years ago
Brad Fitzpatrick	e470893ba0	wgengine/magicsock: use mak in another spot Change-Id: I0a46d6243371ae6d126005a2bd63820cb2d1db6b Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Andrew Dunham	c72caa6672	wgengine/magicsock: use AF_PACKET socket + BPF to read disco messages This is entirely optional (i.e. failing in this code is non-fatal) and only enabled on Linux for now. Additionally, this new behaviour can be disabled by setting the TS_DEBUG_DISABLE_AF_PACKET environment variable. Updates #3824 Replaces #5474 Co-authored-by: Andrew Dunham <andrew@du.nham.ca> Signed-off-by: David Anderson <danderson@tailscale.com>	2 years ago
Andrew Dunham	e945d87d76	util/uniq: use generics instead of reflect (#5491 ) This takes 75% less time per operation per some benchmarks on my mac. Signed-off-by: Andrew Dunham <andrew@du.nham.ca>	2 years ago
Kris Brandow	5d559141d5	wgengine/magicsock: remove mention of Start The Start method was removed in `4c27e2fa22`, but the comment on NewConn still mentioned it doesn't do anything until this method is called. Signed-off-by: Kris Brandow <kris.brandow@gmail.com>	2 years ago
Andrew Dunham	f0d6f173c9	net/netcheck: try ICMP if UDP is blocked (#5056 ) Signed-off-by: Andrew Dunham <andrew@du.nham.ca>	2 years ago
Maisem Ali	a9f6cd41fd	all: use syncs.AtomicValue Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Brad Fitzpatrick	4950fe60bd	syncs, all: move to using Go's new atomic types instead of ours Fixes #5185 Change-Id: I850dd532559af78c3895e2924f8237ccc328449d Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Maisem Ali	9bb5a038e5	all: use atomic.Pointer Also add some missing docs. Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Brad Fitzpatrick	5381437664	logtail, net/portmapper, wgengine/magicsock: use fmt.Appendf Fixes #5206 Change-Id: I490bb92e774ce7c044040537e2cd864fcf1dbe5a Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	5f6abcfa6f	all: migrate code from netaddr.FromStdAddr to Go 1.18 With caveat https://github.com/golang/go/issues/53607#issuecomment-1203466984 that then requires a new wrapper. But a simpler one at least. Updates #5162 Change-Id: I0a5265065bfcd7f21e8dd65b2bd74cae90d76090 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	8725b14056	all: migrate more code code to net/netip directly Instead of going through the tailscale.com/net/netaddr transitional wrappers. Updates #5162 Change-Id: I3dafd1c2effa1a6caa9b7151ecf6edd1a3fda3dd Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	fb82299f5a	wgengine/magicsock: avoid RebindingUDPConn mutex in common read/write case Change-Id: I209fac567326f2e926bace2582dbc67a8bc94c78 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	116f55ff66	all: gofmt for Go 1.19 Updates #5210 Change-Id: Ib02cd5e43d0a8db60c1f09755a8ac7b140b670be Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	a12aad6b47	all: convert more code to use net/netip directly perl -i -npe 's,netaddr.IPPrefixFrom,netip.PrefixFrom,' $(git grep -l -F netaddr.) perl -i -npe 's,netaddr.IPPortFrom,netip.AddrPortFrom,' $(git grep -l -F netaddr. ) perl -i -npe 's,netaddr.IPPrefix,netip.Prefix,g' $(git grep -l -F netaddr. ) perl -i -npe 's,netaddr.IPPort,netip.AddrPort,g' $(git grep -l -F netaddr. ) perl -i -npe 's,netaddr.IP\b,netip.Addr,g' $(git grep -l -F netaddr. ) perl -i -npe 's,netaddr.IPv6Raw\b,netip.AddrFrom16,g' $(git grep -l -F netaddr. ) goimports -w . Then delete some stuff from the net/netaddr shim package which is no longer neeed. Updates #5162 Change-Id: Ia7a86893fe21c7e3ee1ec823e8aba288d4566cd8 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	6a396731eb	all: use various net/netip parse funcs directly Mechanical change with perl+goimports. Changed {Must,}Parse{IP,IPPrefix,IPPort} to their netip variants, then goimports -d . Finally, removed the net/netaddr wrappers, to prevent future use. Updates #5162 Change-Id: I59c0e38b5fbca5a935d701645789cddf3d7863ad Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	7eaf5e509f	net/netaddr: start migrating to net/netip via new netaddr adapter package Updates #5162 Change-Id: Id7bdec303b25471f69d542f8ce43805328d56c12 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	d8cb5aae17	tailcfg, control/controlclient: add tailcfg.PeersChangedPatch [capver 33] This adds a lighter mechanism for endpoint updates from control. Change-Id: If169c26becb76d683e9877dc48cfb35f90cc5f24 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Mihai Parparita	561f7be434	wgengine/magicsock: remove unused metric We don't increment the metricRecvData anywhere, just the per-protocol ones. Signed-off-by: Mihai Parparita <mihai@tailscale.com>	3 years ago
James Tucker	f9e86e64b7	*: use WireGuard where logged, printed or named Signed-off-by: James Tucker <james@tailscale.com>	3 years ago
Maisem Ali	2265587d38	wgengine/{,magicsock}: add metrics for rebinds and restuns Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Brad Fitzpatrick	910ae68e0b	util/mak: move tailssh's mapSet into a new package for reuse elsewhere Change-Id: Idfe95db82275fd2be6ca88f245830731a0d5aecf Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	f2041c9088	all: use strings.Cut even more Change-Id: I943ce72c6f339589235bddbe10d07799c4e37979 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Josh Bleecher Snyder	0868329936	all: use any instead of interface{} My favorite part of generics. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Josh Bleecher Snyder	5f176f24db	go.mod: upgrade to the latest wireguard-go This pulls in a handful of fixes and an update to Go 1.18. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Josh Bleecher Snyder	1b57b0380d	wgengine/magicsock: remove final alloc from ReceiveFrom And now that we don't have to play escape analysis and inlining games, simplify the code. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Maisem Ali	72d8672ef7	tailcfg: make Node.Hostinfo a HostinfoView Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Brad Fitzpatrick	2db6cd1025	ipn/ipnlocal, wgengine/magicsock, logpolicy: quiet more logs Updates #1548 Change-Id: Ied169f872e93be2857890211f2e018307d4aeadc Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	730aa1c89c	derp/derphttp, wgengine/magicsock: prefer IPv6 to DERPs when IPv6 works Fixes #3838 Change-Id: Ie47a2a30c7e8e431512824798d2355006d72fb6a Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	41fd4eab5c	envknob: add new package for all the strconv.ParseBool(os.Getenv(..)) A new package can also later record/report which knobs are checked and set. It also makes the code cleaner & easier to grep for env knobs. Change-Id: Id8a123ab7539f1fadbd27e0cbeac79c2e4f09751 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Josh Bleecher Snyder	de4696da10	wgengine/magicsock: fix deadlock on shutdown This fixes a deadlock on shutdown. One goroutine is waiting to send on c.derpRecvCh before unlocking c.mu. The other goroutine is waiting to lock c.mu before receiving from c.derpRecvCh. #3736 has a more detailed explanation of the sequence of events. Fixes #3736 Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Brad Fitzpatrick	5404a0557b	wgengine/magicsock: remove a per-DERP-packet map lookup in common case Updates #150 Change-Id: Iffb6eccbe7ca97af97d29be63b7e37d487b3ba28 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	5a317d312d	wgengine/magicsock: enable DERP Return Path Optimization (DRPO) Turning this on at the beginning of the 1.21.x dev cycle, for 1.22. Updates #150 Change-Id: I1de567cfe0be3df5227087de196ab88e60c9eb56 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	c6c39930cc	wgengine/magicsock: fix lock ordering deadlock with derphttp Fixes #3726 Change-Id: I32631a44dcc1da3ae47764728ec11ace1c78190d Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	addda5b96f	wgengine/magicsock: fix watchdog timeout on Close when IPv6 not available The blockForeverConn was only using its sync.Cond one side. Looks like it was just forgotten. Fixes #3671 Change-Id: I4ed0191982cdd0bfd451f133139428a4fa48238c Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	28bf53f502	wgengine/magicsock: reduce disco ping heartbeat aggressiveness a bit Bigger changes coming later, but this should improve things a bit in the meantime. Rationale: * 2 minutes -> 45 seconds: 2 minutes was overkill and never considered phones/battery at the time. It was totally arbitrary. 45 seconds is also arbitrary but is less than 2 minutes. * heartbeat from 2 seconds to 3 seconds: in practice this meant two packets per second (2 pings and 2 pongs every 2 seconds) because the other side was also pinging us every 2 seconds on their own. That's just overkill. (see #540 too) So in the worst case before: when we sent a single packet (say: a DNS packet), we ended up sending 61 packets over 2 minutes: the 1 DNS query and then then 60 disco pings (2 minutes / 2 seconds) & received the same (1 DNS response + 60 pongs). Now it's 15. In 1.22 we plan to remove this whole timer-based heartbeat mechanism entirely. The 5 seconds to 6.5 seconds change is just stretching out that interval so you can still miss two heartbeats (other 3 + 3 seconds would be greater than 5 seconds). This means that if your peer moves without telling you, you can have a path out for 6.5 seconds now instead of 5 seconds before disco finds a new one. That will also improve in 1.22 when we start doing UDP+DERP at the same time when confidence starts to go down on a UDP path. Updates #3363 Change-Id: Ic2314bbdaf42edcdd7103014b775db9cf4facb47 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	a201b89e4a	wgengine/magicsock: reconnect to DERP when its definition changes Change-Id: I7c560feb9e4a6e155a35ec764a68354f19f694e4 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	7d9b1de3aa	netcheck,portmapper,magicsock: ignore some UDP write errors on Linux Treat UDP send EPERM errors as a lost UDP packet, not something super fatal. That's just the Linux firewall preventing it from going out. And add a leaf package net/neterror for that (and future) policy that all three packages can share, with tests. Updates #3619 Change-Id: Ibdb838c43ee9efe70f4f25f7fc7fdf4607ba9c1d Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago

1 2 3 4 5 ...

521 Commits (4d747c18337f69cb322f5fb8ec7d258cba64513a)