tailscale

Commit Graph

Author	SHA1	Message	Date
James Tucker	672c2c8de8	wgengine/magicsock: add filter to ignore disco to old/other ports Incoming disco packets are now dropped unless they match one of the current bound ports, or have a zero port. The BPF filter passes all packets with a disco header to the raw packet sockets regardless of destination port (in order to avoid needing to reconfigure BPF on rebind). If a BPF enabled node has just rebound, due to restart or rebind, it may receive and reply to disco ping packets destined for ports other than those which are presently bound. If the pong is accepted, the pinging node will now assume that it can send WireGuard traffic to the pinged port - such traffic will not reach the node as it is not destined for a bound port. The zero port is ignored, if received. This is a speculative defense and would indicate a problem in the receive path, or the BPF filter. This condition is allowed to pass as it may enable traffic to flow, however it will also enable problems with the same symptoms this patch otherwise fixes. Fixes #5536 Signed-off-by: James Tucker <james@tailscale.com>	2 years ago
James Tucker	be140add75	wgengine/magicsock: fix regression in initial bind for js `1f959edeb0` introduced a regression for JS where the initial bind no longer occurred at all for JS. The condition is moved deeper in the call tree to avoid proliferation of higher level conditions. Updates #5537 Signed-off-by: James Tucker <james@tailscale.com>	2 years ago
James Tucker	1f959edeb0	wgengine/magicksock: remove nullability of RebindingUDPConns Both RebindingUDPConns now always exist. the initial bind (which now just calls rebind) now ensures that bind is called for both, such that they both at least contain a blockForeverConn. Calling code no longer needs to assert their state. Signed-off-by: James Tucker <james@tailscale.com>	2 years ago
Brad Fitzpatrick	56f6fe204b	go.mod, wgengine/wgint: bump wireguard-go For `b51010ba13` Change-Id: Ibf767dfad98aef7e9f0505d91c0d26f924e046d5 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
James Tucker	265b008e49	wgengine: fix race on endpoints in getStatus Signed-off-by: James Tucker <james@tailscale.com>	2 years ago
Brad Fitzpatrick	e470893ba0	wgengine/magicsock: use mak in another spot Change-Id: I0a46d6243371ae6d126005a2bd63820cb2d1db6b Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Andrew Dunham	c72caa6672	wgengine/magicsock: use AF_PACKET socket + BPF to read disco messages This is entirely optional (i.e. failing in this code is non-fatal) and only enabled on Linux for now. Additionally, this new behaviour can be disabled by setting the TS_DEBUG_DISABLE_AF_PACKET environment variable. Updates #3824 Replaces #5474 Co-authored-by: Andrew Dunham <andrew@du.nham.ca> Signed-off-by: David Anderson <danderson@tailscale.com>	2 years ago
Brad Fitzpatrick	9bd9f37d29	go.mod: bump wireguard/windows, which moves to using net/netip Updates #5162 Change-Id: If99a3f0000bce0c01bdf44da1d513f236fd7cdf8 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Andrew Dunham	e945d87d76	util/uniq: use generics instead of reflect (#5491 ) This takes 75% less time per operation per some benchmarks on my mac. Signed-off-by: Andrew Dunham <andrew@du.nham.ca>	2 years ago
James Tucker	90dc0e1702	wgengine: remove unused singleflight group Signed-off-by: James Tucker <james@tailscale.com>	2 years ago
Andrew Dunham	d6c3588ed3	wgengine/wgcfg: only write peer headers if necessary (#5449 ) On sufficiently large tailnets, even writing the peer header (~95 bytes) can result in a large amount of data that needs to be serialized and deserialized. Only write headers for peers that need to have their configuration changed. Signed-off-by: Andrew Dunham <andrew@tailscale.com>	2 years ago
James Tucker	81dba3738e	wgengine: remove all peer status from open timeout diagnostics Avoid contention from fetching status for all peers, and instead fetch status for a single peer. Updates tailscale/coral#72 Signed-off-by: James Tucker <james@tailscale.com>	2 years ago
James Tucker	ad1cc6cff9	wgengine: use Go API rather than UAPI for status Signed-off-by: James Tucker <james@tailscale.com>	2 years ago
Brad Fitzpatrick	08b3f5f070	wgengine/wgint: add shady temporary package to get at wireguard internals For #5451 Change-Id: I43482289e323ba9142a446d551ab7a94a467c43a Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Andrew Dunham	9b77ac128a	wgengine: print in-flight operations on watchdog trigger (#5447 ) In addition to printing goroutine stacks, explicitly track all in-flight operations and print them when the watchdog triggers (along with the time they were started at). This should make debugging watchdog failures easier, since we can look at the longest-running operation(s) first. Signed-off-by: Andrew Dunham <andrew@tailscale.com> Signed-off-by: Andrew Dunham <andrew@tailscale.com>	2 years ago
Andrew Dunham	e8f09d24c7	wgengine: use a singleflight.Group to reduce status contention (#5450 ) Updates tailscale/coral#72 Signed-off-by: Andrew Dunham <andrew@tailscale.com> Signed-off-by: Andrew Dunham <andrew@tailscale.com>	2 years ago
Kris Brandow	5d559141d5	wgengine/magicsock: remove mention of Start The Start method was removed in `4c27e2fa22`, but the comment on NewConn still mentioned it doesn't do anything until this method is called. Signed-off-by: Kris Brandow <kris.brandow@gmail.com>	2 years ago
Joe Tsai	32a1a3d1c0	util/deephash: avoid variadic argument for Update (#5372 ) Hashing []any is slow since hashing of interfaces is slow. Hashing of interfaces is slow since we pessimistically assume that cycles can occur through them and start cycle tracking. Drop the variadic signature of Update and fix callers to pass in an anonymous struct so that we are hashing concrete types near the root of the value tree. Signed-off-by: Joe Tsai <joetsai@digital-static.net> Signed-off-by: Joe Tsai <joetsai@digital-static.net>	2 years ago
Andrew Dunham	f0d6f173c9	net/netcheck: try ICMP if UDP is blocked (#5056 ) Signed-off-by: Andrew Dunham <andrew@du.nham.ca>	2 years ago
Maisem Ali	a9f6cd41fd	all: use syncs.AtomicValue Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Brad Fitzpatrick	4950fe60bd	syncs, all: move to using Go's new atomic types instead of ours Fixes #5185 Change-Id: I850dd532559af78c3895e2924f8237ccc328449d Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Maisem Ali	9bb5a038e5	all: use atomic.Pointer Also add some missing docs. Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Brad Fitzpatrick	5381437664	logtail, net/portmapper, wgengine/magicsock: use fmt.Appendf Fixes #5206 Change-Id: I490bb92e774ce7c044040537e2cd864fcf1dbe5a Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	5f6abcfa6f	all: migrate code from netaddr.FromStdAddr to Go 1.18 With caveat https://github.com/golang/go/issues/53607#issuecomment-1203466984 that then requires a new wrapper. But a simpler one at least. Updates #5162 Change-Id: I0a5265065bfcd7f21e8dd65b2bd74cae90d76090 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	8725b14056	all: migrate more code code to net/netip directly Instead of going through the tailscale.com/net/netaddr transitional wrappers. Updates #5162 Change-Id: I3dafd1c2effa1a6caa9b7151ecf6edd1a3fda3dd Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	fb82299f5a	wgengine/magicsock: avoid RebindingUDPConn mutex in common read/write case Change-Id: I209fac567326f2e926bace2582dbc67a8bc94c78 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	116f55ff66	all: gofmt for Go 1.19 Updates #5210 Change-Id: Ib02cd5e43d0a8db60c1f09755a8ac7b140b670be Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	a12aad6b47	all: convert more code to use net/netip directly perl -i -npe 's,netaddr.IPPrefixFrom,netip.PrefixFrom,' $(git grep -l -F netaddr.) perl -i -npe 's,netaddr.IPPortFrom,netip.AddrPortFrom,' $(git grep -l -F netaddr. ) perl -i -npe 's,netaddr.IPPrefix,netip.Prefix,g' $(git grep -l -F netaddr. ) perl -i -npe 's,netaddr.IPPort,netip.AddrPort,g' $(git grep -l -F netaddr. ) perl -i -npe 's,netaddr.IP\b,netip.Addr,g' $(git grep -l -F netaddr. ) perl -i -npe 's,netaddr.IPv6Raw\b,netip.AddrFrom16,g' $(git grep -l -F netaddr. ) goimports -w . Then delete some stuff from the net/netaddr shim package which is no longer neeed. Updates #5162 Change-Id: Ia7a86893fe21c7e3ee1ec823e8aba288d4566cd8 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	6a396731eb	all: use various net/netip parse funcs directly Mechanical change with perl+goimports. Changed {Must,}Parse{IP,IPPrefix,IPPort} to their netip variants, then goimports -d . Finally, removed the net/netaddr wrappers, to prevent future use. Updates #5162 Change-Id: I59c0e38b5fbca5a935d701645789cddf3d7863ad Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	7eaf5e509f	net/netaddr: start migrating to net/netip via new netaddr adapter package Updates #5162 Change-Id: Id7bdec303b25471f69d542f8ce43805328d56c12 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Maisem Ali	9514ed33d2	go.mod: bump gvisor.dev/gvisor Pick up https://github.com/google/gvisor/pull/7787 Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Brad Fitzpatrick	d8cb5aae17	tailcfg, control/controlclient: add tailcfg.PeersChangedPatch [capver 33] This adds a lighter mechanism for endpoint updates from control. Change-Id: If169c26becb76d683e9877dc48cfb35f90cc5f24 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	469c30c33b	ipn/localapi: define a cert dir for Synology DSM6 Fixes #4060 Change-Id: I5f145d4f56f6edb14825268e858d419c55918673 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Mihai Parparita	06aa141632	wgengine/router: avoid unncessary routing configuration changes The iOS and macOS networking extension API only exposes a single setter for the entire routing and DNS configuration, and does not appear to do any kind of diffing or deltas when applying changes. This results in spurious "network changed" errors in Chrome, even when the `OneCGNATRoute` flag from `df9ce972c7` is used (because we're setting the same configuration repeatedly). Since we already keep track of the current routing and DNS configuration in CallbackRouter, use that to detect if they're actually changing, and only invoke the platform setter if it's actually necessary. Updates #3102 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	2 years ago
kylecarbs	9280d39678	wgengine/netstack: close ipstack when netstack.Impl is closed Fixes netstack.Impl leaking goroutines after shutdown. Signed-off-by: kylecarbs <kyle@carberry.com>	2 years ago
James Tucker	76256d22d8	wgengine/router: windows: set SkipAsSource on IPv6 LL addresses Link-local addresses on the Tailscale interface are not routable. Ideally they would be removed, however, a concern exists that the operating system will attempt to re-add them which would lead to thrashing. Setting SkipAsSource attempts to avoid production of packets using the address as a source in any default behaviors. Before, in powershell: `ping (hostname)` would ping the link-local address of the Tailscale interface, and fail. After: `ping (hostname)` now pings the link-local address on the next highest priority metric local interface. Fixes #4647 Signed-off-by: James Tucker <james@tailscale.com>	2 years ago
Mihai Parparita	c41837842b	wasm: drop pprof dependency We can use the browser tools to profile, pprof adds 200K to the binary size. Updates #3157 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	2 years ago
Mihai Parparita	27a1ad6a70	wasm: exclude code that's not used on iOS for Wasm too It has similar size constraints. Saves ~1.9MB from the Wasm build. Updates #3157 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	2 years ago
Brad Fitzpatrick	69b535c01f	wgengine/netstack: replace a 1500 with a const + doc Per post-submit code review feedback of `1336fb740b` from @maisem. Change-Id: Ic5c16306cbdee1029518448642304981f77ea1fd Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	1336fb740b	wgengine/netstack: make netstack MTU be 1280 also Updates #3878 Change-Id: I1850085b32c8a40d85607b4ad433622c97d96a8d Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Tom	2903d42921	wgengine/router: delete hardcoded link-local address on Windows (#4740 ) Fixes #4647 It seems that Windows creates a link-local address for the TUN driver, seemingly based on the (fixed) adapter GUID. This results in a fixed MAC address, which for some reason doesn't handle loopback correctly. Given the derived link-local address is preferred for lookups (thanks LLMNR), traffic which addresses the current node by hostname uses this broken address and never works. To address this, we remove the broken link-local address from the wintun adapter. Signed-off-by: Tom DNetto <tom@tailscale.com>	3 years ago
Tom	fc5839864b	wgengine/netstack: handle multiple magicDNS queries per UDP socket (#4708 ) Fixes: #4686 Signed-off-by: Tom DNetto <tom@tailscale.com>	3 years ago
Tom	9343967317	wgengine/filter: preallocate some hot slices in MatchesFromFilterRules (#4672 ) Profiling identified this as a fairly hot path for growing a slice. Given this is only used in control & when a new packet filter is received, this shouldnt be hot in the client.	3 years ago
Mihai Parparita	561f7be434	wgengine/magicsock: remove unused metric We don't increment the metricRecvData anywhere, just the per-protocol ones. Signed-off-by: Mihai Parparita <mihai@tailscale.com>	3 years ago
Mihai Parparita	86069874c9	net/tstun, wgengine: use correct type for counter metrics We were marking them as gauges, but they are only ever incremented, thus counter is more appropriate. Signed-off-by: Mihai Parparita <mihai@tailscale.com>	3 years ago
Maisem Ali	fd99c54e10	tailcfg,all: change structs to []*dnstype.Resolver Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Maisem Ali	e409e59a54	cmd/cloner,util/codegen: refactor cloner internals to allow reuse Also run go generate again for Copyright updates. Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Brad Fitzpatrick	35111061e9	wgengine/netstack, ipn/ipnlocal: serve http://100.100.100.100/ For future stuff. Change-Id: I64615b8b2ab50b57e4eef1ca66fa72e3458cb4a9 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Tom	d1d6ab068e	net/dns, wgengine: implement DNS over TCP (#4598 ) * net/dns, wgengine: implement DNS over TCP Signed-off-by: Tom DNetto <tom@tailscale.com> * wgengine/netstack: intercept only relevant port/protocols to quad-100 Signed-off-by: Tom DNetto <tom@tailscale.com>	3 years ago
James Tucker	f9e86e64b7	*: use WireGuard where logged, printed or named Signed-off-by: James Tucker <james@tailscale.com>	3 years ago
James Tucker	ae483d3446	wgengine, net/packet, cmd/tailscale: add ICMP echo Updates tailscale/corp#754 Signed-off-by: James Tucker <james@tailscale.com>	3 years ago
Tom DNetto	2a0b5c21d2	net/dns/{., resolver}, wgengine: fix goroutine leak on shutdown Signed-off-by: Tom DNetto <tom@tailscale.com>	3 years ago
Tom DNetto	7f45734663	assorted: documentation and readability fixes This were intended to be pushed to #4408, but in my excitement I forgot to git push :/ better late than never. Signed-off-by: Tom DNetto <tom@tailscale.com>	3 years ago
Tom DNetto	9e77660931	net/tstun,wgengine/{.,netstack}: handle UDP magicDNS traffic in netstack This change wires netstack with a hook for traffic coming from the host into the tun, allowing interception and handling of traffic to quad-100. With this hook wired, magicDNS queries over UDP are now handled within netstack. The existing logic in wgengine to handle magicDNS remains for now, but its hook operates after the netstack hook so the netstack implementation takes precedence. This is done in case we need to support platforms with netstack longer than expected. Signed-off-by: Tom DNetto <tom@tailscale.com>	3 years ago
Tom DNetto	dc71d3559f	net/tstun,wgengine: split PreFilterOut into multiple hooks A subsequent commit implements handling of magicDNS traffic via netstack. Implementing this requires a hook for traffic originating from the host and hitting the tun, so we make another hook to support this. Signed-off-by: Tom DNetto <tom@tailscale.com>	3 years ago
Tom DNetto	9dee6adfab	cmd/tailscaled,ipn/ipnlocal,wgengine/...: pass dns.Manager into netstack Needed for a following commit which moves magicDNS handling into netstack. Signed-off-by: Tom DNetto <tom@tailscale.com>	3 years ago
Brad Fitzpatrick	6bed781259	all: gofmt all Well, goimports actually (which adds the normal import grouping order we do) Change-Id: I0ce1b1c03185f3741aad67c14a7ec91a838de389 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
James Tucker	1aa75b1c9e	wgengine/netstack: always set TCP keepalive Setting keepalive ensures that idle connections will eventually be closed. In userspace mode, any application configured TCP keepalive is effectively swallowed by the host kernel, and is not easy to detect. Failure to close connections when a peer tailscaled goes offline or restarts may result in an otherwise indefinite connection for any protocol endpoint that does not initiate new traffic. This patch does not take any new opinion on a sensible default for the keepalive timers, though as noted in the TODO, doing so likely deserves further consideration. Update #4522 Signed-off-by: James Tucker <james@tailscale.com>	3 years ago
Maisem Ali	80ba161c40	wgengine/monitor: do not ignore changes to pdp_ip* One current theory (among other things) on battery consumption is that magicsock is resorting to using the IPv6 over LTE even on WiFi. One thing that could explain this is that we do not get link change updates for the LTE modem as we ignore them in this list. This commit makes us not ignore changes to `pdp_ip` as a test. Updates #3363 Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Maisem Ali	2265587d38	wgengine/{,magicsock}: add metrics for rebinds and restuns Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Brad Fitzpatrick	910ae68e0b	util/mak: move tailssh's mapSet into a new package for reuse elsewhere Change-Id: Idfe95db82275fd2be6ca88f245830731a0d5aecf Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	53588f632d	Revert "wgengine/router,util/kmod: load & log xt_mark" This reverts commit `8d6793fd70`. Reason: breaks Android build (cgo/pthreads addition) We can try again next cycle. Change-Id: I5e7e1730a8bf399a8acfce546a6d22e11fb835d5 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
James Tucker	8d6793fd70	wgengine/router,util/kmod: load & log xt_mark Attempt to load the xt_mark kernel module when it is not present. If the load fails, log error information. It may be tempting to promote this failure to an error once it has been in use for some time, so as to avoid reaching an error with the iptables invocation, however, there are conditions under which the two stages may disagree - this change adds more useful breadcrumbs. Example new output from tailscaled running under my WSL2: ``` router: ensure module xt_mark: "/usr/sbin/modprobe xt_mark" failed: exit status 1; modprobe: FATAL: Module xt_mark not found in directory /lib/modules/5.10.43.3-microsoft-standard-WSL2 ``` Background: There are two places to lookup modules, one is `/proc/modules` "old", the other is `/sys/module/` "new". There was query_modules(2) in linux <2.6, alas, it is gone. In a docker container in the default configuration, you would get /proc/modules and /sys/module/ both populated. lsmod may work file, modprobe will fail with EPERM at `finit_module()` for an unpriviliged container. In a priviliged container the load may succeed, if some conditions are met. This condition should be avoided, but the code landing in this change does not attempt to avoid this scenario as it is both difficult to detect, and has a very uncertain impact. In an nspawn container `/proc/modules` is populated, but `/sys/module` does not exist. Modern `lsmod` versions will fail to gather most module information, without sysfs being populated with module information. In WSL2 modules are likely missing, as the in-use kernel typically is not provided by the distribution filesystem, and WSL does not mount in a module filesystem of its own. Notably the WSL2 kernel supports iptables marks without listing the xt_mark module in /sys/module, and /proc/modules is empty. On a recent kernel, we can ask the capabilities system about SYS_MODULE, that will help to disambiguate between the non-privileged container case and just being root. On older kernels these calls may fail. Update #4329 Signed-off-by: James Tucker <james@tailscale.com>	3 years ago
Maisem Ali	136f30fc92	wgengine/monitor: split the unexpected stringification log line It unfortuantely gets truncated because it's too long, split it into 3 different log lines to circumvent truncation. Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Maisem Ali	8e40bfc6ea	wgengine/monitor: ignore OS-specific uninteresting interfaces Currently we ignore these interfaces in the darwin osMon but then would consider it interesting when checking if anything had changed. Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Brad Fitzpatrick	0ce67ccda6	wgengine/router: make supportsV6NAT check catch more cases Updates #4459 Change-Id: Ic27621569d2739298e652769d10e38608c6012be Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Maisem Ali	3ffd88a84a	wgengine/monitor: do not set timeJumped on iOS/Android In `(Mon).Start` we don't run a timer to update `(Mon).lastWall` on iOS and Android as their sleep patterns are bespoke. However, in the debounce goroutine we would notice that the the wall clock hadn't been updated since the last event would assume that a time jump had occurred. This would result in non-events being considered as major-change events. This commit makes it so that `(*Mon).timeJumped` is never set to `true` on iOS and Android. Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Brad Fitzpatrick	16f3520089	all: add arbitrary capability support Updates #4217 RELNOTE=start of WhoIsResponse capability support Change-Id: I6522998a911fe49e2f003077dad6164c017eed9b Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	8ee044ea4a	ssh/tailssh: make the SSH server a singleton, register with LocalBackend Remove the weird netstack -> tailssh dependency and instead have tailssh register itself with ipnlocal when linked. This makes tailssh.server a singleton, so we can have a global map of all sessions. Updates #3802 Change-Id: Iad5caec3a26a33011796878ab66b8e7b49339f29 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	da14e024a8	tailcfg, ssh/tailssh: optionally support SSH public keys in wire policy And clean up logging. Updates #3802 Change-Id: I756dc2d579a16757537142283d791f1d0319f4f0 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	3ae701f0eb	net/tsaddr, wgengine/netstack: add IPv6 range that forwards to site-relative IPv4 This defines a new magic IPv6 prefix, fd7a:115c:a1e0:b1a::/64, a subset of our existing /48, where the final 32 bits are an IPv4 address, and the middle 32 bits are a user-chosen "site ID". (which must currently be 0000:00xx; the top 3 bytes must be zero for now) e.g., I can say my home LAN's "site ID" is "0000:00bb" and then advertise its 10.2.0.0/16 IPv4 range via IPv6, like: tailscale up --advertise-routes=fd7a:115c:a1e0:b1a::bb:10.2.0.0/112 (112 being /128 minuse the /96 v6 prefix length) Then people in my tailnet can: $ curl '[fd7a:115c:a1e0:b1a::bb:10.2.0.230]' <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" .... Updates #3616, etc RELNOTE=initial support for TS IPv6 addresses to route v4 "via" specific nodes Change-Id: I9b49b6ad10410a24b5866b9fbc69d3cae1f600ef Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
James Tucker	f4aad61e67	wgengine/monitor: ignore duplicate RTM_NEWADDRs Ignoring the events at this layer is the simpler path for right now, a broader change should follow to suppress irrelevant change events in a higher layer so as to avoid related problems with other monitoring paths on other platforms. This approach may also carry a small risk that it applies an at-most-once invariant low in the chain that could be assumed otherwise higher in the code. I adjusted the newAddrMessage type to include interface index rather than a label, as labels are not always supplied, and in particular on my test hosts they were consistently missing for ipv6 address messages. I adjusted the newAddrMessage.Addr field to be populated from Attributes.Address rather than Attributes.Local, as again for ipv6 .Local was always empty, and with ipv4 the .Address and .Local contained the same contents in each of my test environments. Update #4282 Signed-off-by: James Tucker <james@tailscale.com>	3 years ago
James Tucker	2f69c383a5	wgengine/monitor: add envknob TS_DEBUG_NETLINK While I trust the test behavior, I also want to assert the behavior in a reproduction environment, this envknob gives me the log information I need to do so. Update #4282 Signed-off-by: James Tucker <james@tailscale.com>	3 years ago
Tom	24bdcbe5c7	net/dns, net/dns/resolver, wgengine: refactor DNS request path (#4364 ) * net/dns, net/dns/resolver, wgengine: refactor DNS request path Previously, method calls into the DNS manager/resolver types handled DNS requests rather than DNS packets. This is fine for UDP as one packet corresponds to one request or response, however will not suit an implementation that supports DNS over TCP. To support PRs implementing this in the future, wgengine delegates all handling/construction of packets to the magic DNS endpoint, to the DNS types themselves. Handling IP packets at this level enables future support for both UDP and TCP. Signed-off-by: Tom DNetto <tom@tailscale.com>	3 years ago
James Tucker	c6ac29bcc4	wgengine/netstack: disable refsvfs2 leak tracking (#4378 ) In addition an envknob (TS_DEBUG_NETSTACK_LEAK_MODE) now provides access to set leak tracking to more useful values. Fixes #4309 Signed-off-by: James Tucker <james@tailscale.com>	3 years ago
Brad Fitzpatrick	e4d8d5e78b	net/packet, wgengine/netstack: remove workaround for old gvisor ECN bug Fixes #2642 Change-Id: Ic02251d24a4109679645d1c8336e0f961d0cce13 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Maisem Ali	6fecc16c3b	ipn/ipnlocal: do not process old status messages received out of order When `setWgengineStatus` is invoked concurrently from multiple goroutines, it is possible that the call invoked with a newer status is processed before a call with an older status. e.g. a status that has endpoints might be followed by a status without endpoints. This causes unnecessary work in the engine and can result in packet loss. This patch adds an `AsOf time.Time` field to the status to specifiy when the status was calculated, which later allows `setWgengineStatus` to ignore any status messages it receives that are older than the one it has already processed. Updates tailscale/corp#2579 Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
James Tucker	445c04c938	wgengine: inject packetbuffers rather than bytes (#4220 ) Plumb the outbound injection path to allow passing netstack PacketBuffers down to the tun Read, where they are decref'd to enable buffer re-use. This removes one packet alloc & copy, and reduces GC pressure by pooling outbound injected packets. Fixes #2741 Signed-off-by: James Tucker <james@tailscale.com>	3 years ago
Brad Fitzpatrick	f2041c9088	all: use strings.Cut even more Change-Id: I943ce72c6f339589235bddbe10d07799c4e37979 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Josh Bleecher Snyder	0868329936	all: use any instead of interface{} My favorite part of generics. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Josh Bleecher Snyder	5f176f24db	go.mod: upgrade to the latest wireguard-go This pulls in a handful of fixes and an update to Go 1.18. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Brad Fitzpatrick	61ee72940c	all: use Go 1.18's strings.Cut More remain. Change-Id: I6ec562cc1f687600758deae1c9d7dbd0d04004cb Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Josh Bleecher Snyder	1b57b0380d	wgengine/magicsock: remove final alloc from ReceiveFrom And now that we don't have to play escape analysis and inlining games, simplify the code. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Josh Bleecher Snyder	08cf54f386	wgengine/magicsock: fix goMajorVersion for 1.18 ts release The version string changed slightly. Adapt. And always check the current Go version to prevent future accidental regressions. I would have missed this one had I not explicitly manually checked it. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Maisem Ali	07f48a7bfe	wgengine: handle nil netmaps when assigning isSubnetRouter. Fixes tailscale/coral#51 Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Brad Fitzpatrick	26f27a620a	wgengine/router: delete legacy netfilter rule cleanup [Linux] This was just cleanup for an ancient version of Tailscale. Any such machines have upgraded since then. Change-Id: Iadcde05b37c2b867f92e02ec5d2b18bf2b8f653a Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	c9eca9451a	ssh: make it build on darwin For local dev testing initially. Product-wise, it'll probably only be workable on the two unsandboxed builds. Updates #3802 Change-Id: Ic352f966e7fb29aff897217d79b383131bf3f92b Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Maisem Ali	72d8672ef7	tailcfg: make Node.Hostinfo a HostinfoView Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Brad Fitzpatrick	1b87e025e9	ssh/tailssh: move SSH code from wgengine/netstack to this new package Still largely incomplete, but in a better home now. Updates #3802 Change-Id: I46c5ffdeb12e306879af801b06266839157bc624 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	2db6cd1025	ipn/ipnlocal, wgengine/magicsock, logpolicy: quiet more logs Updates #1548 Change-Id: Ied169f872e93be2857890211f2e018307d4aeadc Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	86a902b201	all: adjust some log verbosity Updates #1548 Change-Id: Ia55f1b5dc7dfea09a08c90324226fb92cd10fa00 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	6eed2811b2	wgengine/netstack: start supporting different SSH users Updates #3802 Change-Id: I44de6897e36b1362cd74c9b10c9cbfeb9abc3dbc Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	bd90781b34	ipn/ipnlocal, wgengine/netstack: use netstack for peerapi server We're finding a bunch of host operating systems/firewalls interact poorly with peerapi. We either get ICMP errors from the host or users need to run commands to allow the peerapi port: https://github.com/tailscale/tailscale/issues/3842#issuecomment-1025133727 ... even though the peerapi should be an internal implementation detail. Rather than fight the host OS & firewalls, this change handles the server side of peerapi entirely in netstack (except on iOS), so it never makes its way to the host OS where it might be messed with. Two main downsides are: 1) netstack isn't as fast, but we don't really need speed for peerapi. And actually, with fewer trips to/from the kernel, we might actually make up for some of the netstack performance loss by staying in userspace. 2) tcpdump / Wireshark etc packet captures will no longer see the peerapi traffic. Oh well. Crawshaw's been wanting to add packet capture server support to tailscaled, so we'll probably do that sooner now. A future change might also then use peerapi for the client-side (except on iOS). Updates #3842 (probably fixes, as well as many exit node issues I bet) Change-Id: Ibc25edbb895dc083d1f07bd3cab614134705aa39 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	730aa1c89c	derp/derphttp, wgengine/magicsock: prefer IPv6 to DERPs when IPv6 works Fixes #3838 Change-Id: Ie47a2a30c7e8e431512824798d2355006d72fb6a Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	1af26222b6	go.mod: bump netstack, switch to upstream netstack Now that Go 1.17 has module graph pruning (https://go.dev/doc/go1.17#go-command), we should be able to use upstream netstack without breaking our private repo's build that then depends on the tailscale.com Go module. This is that experiment. Updates #1518 (the original bug to break out netstack to own module) Updates #2642 (this updates netstack, but doesn't remove workaround) Change-Id: I27a252c74a517053462e5250db09f379de8ac8ff Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
David Anderson	7a18fe3dca	wgengine/magicsock: make debugUseDerpRoute an opt.Bool. Can still be constant, just needs the extra methods. Fixes #3812 Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
Brad Fitzpatrick	f3c0023add	wgengine/netstack: add an SSH server experiment Disabled by default. To use, run tailscaled with: TS_SSH_ALLOW_LOGIN=you@bar.com And enable with: $ TAILSCALE_USE_WIP_CODE=true tailscale up --ssh=true Then ssh [any-user]@[your-tailscale-ip] for a root bash shell. (both the "root" and "bash" part are temporary) Updates #3802 Change-Id: I268f8c3c95c8eed5f3231d712a5dc89615a406f0 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	41fd4eab5c	envknob: add new package for all the strconv.ParseBool(os.Getenv(..)) A new package can also later record/report which knobs are checked and set. It also makes the code cleaner & easier to grep for env knobs. Change-Id: Id8a123ab7539f1fadbd27e0cbeac79c2e4f09751 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	c64af5e676	wgengine/netstack: clear TCP ECN bits before giving to gvisor Updates #2642 Change-Id: Ic219442a2656dd9dc99ae1dd91e907fd3d924987 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Josh Bleecher Snyder	de4696da10	wgengine/magicsock: fix deadlock on shutdown This fixes a deadlock on shutdown. One goroutine is waiting to send on c.derpRecvCh before unlocking c.mu. The other goroutine is waiting to lock c.mu before receiving from c.derpRecvCh. #3736 has a more detailed explanation of the sequence of events. Fixes #3736 Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Brad Fitzpatrick	185825df11	wgengine/netstack: add a missing refcount decrement after packet injection Fixes #3762 Updates #3745 (probably fixes?) Change-Id: I1d3f0590fd5b8adfbc9110bc45ff717bb9e79aae Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	790e41645b	wgengine/netstack: add an Impl.Close method for tests Change-Id: Idbb3fd6d749d3e4effdf96de77a1106584822fef Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	166fe3fb12	wgengine/netstack: add missing error logging in a RST case Updates #2642 Change-Id: I9f2f8fd28fc980208b0739eb9caf9db7b0977c09 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	6be48dfcc6	wgengine/netstack: fix netstack ping timeout on darwin -W is milliseconds on darwin, not seconds, and empirically it's milliseconds after a 1 second base. Change-Id: I2520619e6699d9c505d9645ce4dfee4973555227 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	5404a0557b	wgengine/magicsock: remove a per-DERP-packet map lookup in common case Updates #150 Change-Id: Iffb6eccbe7ca97af97d29be63b7e37d487b3ba28 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	5a317d312d	wgengine/magicsock: enable DERP Return Path Optimization (DRPO) Turning this on at the beginning of the 1.21.x dev cycle, for 1.22. Updates #150 Change-Id: I1de567cfe0be3df5227087de196ab88e60c9eb56 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	c6c39930cc	wgengine/magicsock: fix lock ordering deadlock with derphttp Fixes #3726 Change-Id: I32631a44dcc1da3ae47764728ec11ace1c78190d Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	a93937abc3	wgengine/netstack: make userspace ping work when tailscaled has CAP_NET_RAW Updates #3710 Change-Id: Ief56c7ac20f5f09a2f940a1906b9efbf1b0d6932 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	1a4e8da084	wgengine/netstack: fake pings through netstack on Android too Every OS ping binary is slightly different. Adjust for Android's. Updates #1738 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	1b426cc232	wgengine/netstack: add env knob to turn on netstack debug logs Except for the super verbose packet-level dumps. Keep those disabled by default with a const. Updates #2642 Change-Id: Ia9eae1677e8b3fe6f457a59e44896a335d95d547 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	addda5b96f	wgengine/magicsock: fix watchdog timeout on Close when IPv6 not available The blockForeverConn was only using its sync.Cond one side. Looks like it was just forgotten. Fixes #3671 Change-Id: I4ed0191982cdd0bfd451f133139428a4fa48238c Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	28bf53f502	wgengine/magicsock: reduce disco ping heartbeat aggressiveness a bit Bigger changes coming later, but this should improve things a bit in the meantime. Rationale: * 2 minutes -> 45 seconds: 2 minutes was overkill and never considered phones/battery at the time. It was totally arbitrary. 45 seconds is also arbitrary but is less than 2 minutes. * heartbeat from 2 seconds to 3 seconds: in practice this meant two packets per second (2 pings and 2 pongs every 2 seconds) because the other side was also pinging us every 2 seconds on their own. That's just overkill. (see #540 too) So in the worst case before: when we sent a single packet (say: a DNS packet), we ended up sending 61 packets over 2 minutes: the 1 DNS query and then then 60 disco pings (2 minutes / 2 seconds) & received the same (1 DNS response + 60 pongs). Now it's 15. In 1.22 we plan to remove this whole timer-based heartbeat mechanism entirely. The 5 seconds to 6.5 seconds change is just stretching out that interval so you can still miss two heartbeats (other 3 + 3 seconds would be greater than 5 seconds). This means that if your peer moves without telling you, you can have a path out for 6.5 seconds now instead of 5 seconds before disco finds a new one. That will also improve in 1.22 when we start doing UDP+DERP at the same time when confidence starts to go down on a UDP path. Updates #3363 Change-Id: Ic2314bbdaf42edcdd7103014b775db9cf4facb47 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	a201b89e4a	wgengine/magicsock: reconnect to DERP when its definition changes Change-Id: I7c560feb9e4a6e155a35ec764a68354f19f694e4 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	506c727e30	ipnlocal, net/{dns,tsaddr,tstun}, wgengine: support MagicDNS on IPv6 Fixes #3660 RELNOTE=MagicDNS now works over IPv6 when CGNAT IPv4 is disabled. Change-Id: I001e983df5feeb65289abe5012dedd177b841b45 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	7d9b1de3aa	netcheck,portmapper,magicsock: ignore some UDP write errors on Linux Treat UDP send EPERM errors as a lost UDP packet, not something super fatal. That's just the Linux firewall preventing it from going out. And add a leaf package net/neterror for that (and future) policy that all three packages can share, with tests. Updates #3619 Change-Id: Ibdb838c43ee9efe70f4f25f7fc7fdf4607ba9c1d Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	2c94e3c4ad	wgengine/magicsock: don't unconditionally close DERP connections on rebind Only if the source address isn't on the currently active interface or a ping of the DERP server fails. Updates #3619 Change-Id: I6bf06503cff4d781f518b437c8744ac29577acc8 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	ae319b4636	wgengine/magicsock: add HTML debug handler to see magicsock state Change-Id: Ibc46f4e9651e1c86ec6f5d139f5e9bdc7a488415 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	c7f5bc0f69	wgengine/magicsock: add metrics for sent disco messages We only tracked the transport type (UDP vs DERP), not what they were. Change-Id: Ia4430c1c53afd4634e2d9893d96751a885d77955 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	5a9914a92f	wgengine/netstack: don't remove 255.255.255.255/32 from netstack The intent of the updateIPs code is to add & remove IP addresses to netstack based on what we get from the netmap. But netstack itself adds 255.255.255.255/32 apparently and we always fight it (and it adds it back?). So stop fighting it. Updates #2642 (maybe fixes? maybe.) Change-Id: I37cb23f8e3f07a42a1a55a585689ca51c2be7c60 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Josh Bleecher Snyder	93ae11105d	ipn/ipnlocal: clear magicsock's netmap on logout magicsock was hanging onto its netmap on logout, which caused tailscale status to display partial information about a bunch of zombie peers. After logout, there should be no peers. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Brad Fitzpatrick	6590fc3a94	wgengine/netstack: remove some logging on forwarding connections Change-Id: Ib1165b918cd5da38583f8e7d4be8cda54af3c81d Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	486059589b	all: gofmt -w -s (simplify) tests And it updates the build tag style on a couple files. Change-Id: I84478d822c8de3f84b56fa1176c99d2ea5083237 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Maisem Ali	d24a8f7b5a	wgengine/router{windows}: return the output from the firewallTweaker on error. While debugging a customer issue where the firewallTweaker was failing the only message we have is `router: firewall: error adding Tailscale-Process rule: exit status 1` which is not really helpful. This will help diagnose firewall tweaking failures. Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Brad Fitzpatrick	b59e7669c1	wgengine/netstack: in netstack/hybrid mode, fake ICMP using ping command Change-Id: I42cb4b9b326337f4090d9cea532230e36944b6cb Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	7b9c7bc42b	ipn/ipnstate: remove old deprecated TailAddr IPv4-only field It's been a bunch of releases now since the TailscaleIPs slice replacement was added. Change-Id: I3bd80e1466b3d9e4a4ac5bedba8b4d3d3e430a03 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Denton Gentry	878a20df29	net/dns: add GetBaseConfig to CallbackRouter. Allow users of CallbackRouter to supply a GetBaseConfig implementation. This is expected to be used on Android, which currently lacks both a) platform support for Split-DNS and b) a way to retrieve the current DNS servers. iOS/macOS also use the CallbackRouter but have platform support for SplitDNS, so don't need getBaseConfig. Updates https://github.com/tailscale/tailscale/issues/2116 Updates https://github.com/tailscale/tailscale/issues/988 Signed-off-by: Denton Gentry <dgentry@tailscale.com>	3 years ago
Todd Neal	eeccbccd08	support running in a FreeBSD jail Since devd apparently can't be made to work in a FreeBSD jail fall back to polling. Fixes tailscale#2858 Signed-off-by: Todd Neal <todd@tneal.org>	3 years ago
Brad Fitzpatrick	69de3bf7bf	wgengine/filter: let unknown IPProto match if IP okay & match allows all ports RELNOTE=yes Change-Id: I96eaf3cf550cee7bb6cdb4ad81fc761e280a1b2a Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	9c5c9d0a50	ipn/ipnlocal, net/tsdial: make SOCKS/HTTP dials use ExitDNS And simplify, unexport some tsdial/netstack stuff in the the process. Fixes #3475 Change-Id: I186a5a5cbd8958e25c075b4676f7f6e70f3ff76e Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	adc5997592	net/tsdial: give netstack a Dialer, start refactoring name resolution This starts to refactor tsdial.Dialer's name resolution to have different stages: in-memory MagicDNS vs system resolution. A future change will plug in ExitDNS resolution. This also plumbs a Dialer into netstack and unexports the dnsMap internals. And it removes some of the async AddNetworkMapCallback usage and replaces it with synchronous updates of the Dialer's netmap from LocalBackend, since the LocalBackend has the Dialer too. Updates #3475 Change-Id: Idcb7b1169878c74f0522f5151031ccbc49fe4cb4 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	ad3d6e31f0	net/tsdial: move macOS/iOS peerapi sockopt logic from LocalBackend Change-Id: I812cae027c40c70cdc701427b1a1850cd9bcd60c Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	c7fb26acdb	net/tsdial: also plumb TUN name and monitor into tsdial.Dialer In prep for moving stuff out of LocalBackend. Change-Id: I9725aa9c3ebc7275f8c40e040b326483c0340127 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	c37af58ea4	net/tsdial: move more weirdo dialing into new tsdial package, plumb Not done yet, but this move more of the outbound dial special casing from random packages into tsdial, which aspires to be the one unified place for all outbound dialing shenanigans. Then this plumbs it all around, so everybody is ultimately holding on to the same dialer. As of this commit, macOS/iOS using an exit node should be able to reach to the exit node's DoH DNS proxy over peerapi, doing the sockopt to stay within the Network Extension. A number of steps remain, including but limited to: * move a bunch more random dialing stuff * make netstack-mode tailscaled be able to use exit node's DNS proxy, teaching tsdial's resolver to use it when an exit node is in use. Updates #1713 Change-Id: I1e8ee378f125421c2b816f47bc2c6d913ddcd2f5 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	bf1d69f25b	wgengine/monitor: fix docs on Mon.InterfaceState The behavior was changed in March (in `7f174e84e6`) but that change forgot to update these docs. Change-Id: I79c0301692c1d13a4a26641cc5144baf48ec1360 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	d5405c66b7	net/tsdial: start of new package to unify all outbound dialing complexity For now this just deletes the net/socks5/tssocks implementation (and the DNSMap stuff from wgengine/netstack) and moves it into net/tsdial. Then initialize a Dialer early in tailscaled, currently only use for the outbound and SOCKS5 proxies. It will be plumbed more later. Notably, it needs to get down into the DNS forwarder for exit node DNS forwading in netstack mode. But it will also absorb all the peerapi setsockopt and netns Dial and tlsdial complexity too. Updates #1713 Change-Id: Ibc6d56ae21a22655b2fa1002d8fc3f2b2ae8b6df Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	bb91cfeae7	net/socks5/tssocks, wgengine: permit SOCKS through subnet routers/exit nodes Fixes #1970 Change-Id: Ibef45e8796e1d9625716d72539c96d1dbf7b1f76 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	ff9727c9ff	wgengine/filter: fix, test NewAllowAllForTest I probably broke it when SCTP support was added but nothing apparently ever used NewAllowAllForTest so it wasn't noticed when it broke. Change-Id: Ib5a405be233d53cb7fcc61d493ae7aa2d1d590a2 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
David Anderson	33c541ae30	ipn/ipnlocal: populate self status from netmap in ipnlocal, not magicsock. Fixes #1933 Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
Brad Fitzpatrick	283ae702c1	ipn/ipnlocal: start adding DoH DNS server to peerapi when exit node Updates #1713 Change-Id: I8d9c488f779e7acc811a9bc18166a2726198a429 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Josh Bleecher Snyder	ad5e04249b	wgengine/monitor: ignore adding/removing uninteresting IPs One of the most common "unexpected" log lines is: "network state changed, but stringification didn't" One way that this can occur is if an interesting interface (non-Tailscale, has interesting IP address) gains or loses an uninteresting IP address (link local or loopback). The fact that the interface is interesting is enough for EqualFiltered to inspect it. The fact that an IP address changed is enough for EqualFiltered to declare that the interfaces are not equal. But the State.String method reasonably declines to print any uninteresting IP addresses. As a result, the network state appears to have changed, but the stringification did not. The String method is correct; nothing interesting happened. This change fixes this by adding an IP address filter to EqualFiltered in addition to the interface filter. This lets the network monitor ignore the addition/removal of uninteresting IP addresses. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Brad Fitzpatrick	e8db43e8fa	wgengine/router: demote TestDebugListRules fail to skip Updates #3360 Change-Id: Ic5c98ea03f3171c13ab9293a0ae74d17fd04d149 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	2ea765e5d8	go.mod: bump inet.af/netstack Updates #2642 (I'd hoped, but doesn't seem to fix it) Change-Id: Id54af7c90a1206bc7018215957e20e954782b911 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	946dfec98a	wgengine/router: fix checkIPRuleSupportsV6 to actually use IPv6 Updates #3358 (should fix it) Updates #391 Change-Id: Ia62437dfa81247b0b5994d554cf279c3d540e4e7 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	9259377a7f	wgengine/router: don't assume Linux was built with IP_MULTIPLE_TABLES Updates #3351 Updates #391 Change-Id: I7e66b686e05f3c970846513679cc62556ebe322a Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	0350cf0438	wgengine{,/router}: annotate some more errors Updates #3351 Change-Id: I8b4f957d2051b3e29401bb449dbadbdada3a7c46 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Josh Bleecher Snyder	758c37b83d	net/netns: thread logf into control functions So that darwin can log there without panicking during tests. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Josh Bleecher Snyder	85184a58ed	wgengine/wgcfg: recover from mismatched PublicKey/Endpoints In rare circumstances (tailscale/corp#3016), the PublicKey and Endpoints can diverge. This by itself doesn't cause any harm, but our early exit in response did, because it prevented us from recovering from it. Remove the early exit. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Brad Fitzpatrick	8ec44d0d5f	wgengine/magicsock: remove some log spam Fixes tailscale/corp#3070 Change-Id: Ie50031800ec8669e0596ad6d59d1e329a5c88516 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	61d0435ed9	wgengine/monitor: reduce Windows log spam Fixes #3345 Change-Id: Icde9c92f88f98bb3b030d39b0424a7d389bceb88 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	d24ed3f68e	wgengine/router: add debug knob to resort to Linux "ip" command usage Tailscale 1.18 uses netlink instead of the "ip" command to program the Linux kernel. The old way was kept primarily for tests, but this also adds a TS_DEBUG_USE_IP_COMMAND environment knob to force the old way temporarily for debugging anybody who might have problems with the new way in 1.18. Updates #391 Change-Id: I0236fbfda6c9c05dcb3554fcc27ec0c86456efd9 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago

1 2 3 4 5 ...

1259 Commits (49c206fe1e583ea676ec80896ceb54efdea52000)