tailscale

Commit Graph

Author	SHA1	Message	Date
Tom Proctor	e48cddfbb3	cmd/{containerboot,k8s-operator},k8s-operator,kube: add ProxyGroup controller (#13684 ) Implements the controller for the new ProxyGroup CRD, designed for running proxies in a high availability configuration. Each proxy gets its own config and state Secret, and its own tailscale node ID. We are currently mounting all of the config secrets into the container, but will stop mounting them and instead read them directly from the kube API once #13578 is implemented. Updates #13406 Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>	2 months ago
Irbe Krumina	e8bb5d1be5	cmd/{k8s-operator,containerboot},k8s-operator,kube: reconcile ExternalName Services for ProxyGroup (#13635 ) Adds a new reconciler that reconciles ExternalName Services that define a tailnet target that should be exposed to cluster workloads on a ProxyGroup's proxies. The reconciler ensures that for each such service, the config mounted to the proxies is updated with the tailnet target definition and that and EndpointSlice and ClusterIP Service are created for the service. Adds a new reconciler that ensures that as proxy Pods become ready to route traffic to a tailnet target, the EndpointSlice for the target is updated with the Pods' endpoints. Updates tailscale/tailscale#13406 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	2 months ago
Irbe Krumina	c62b0732d2	cmd/k8s-operator: remove auth key once proxy has logged in (#13612 ) The operator creates a non-reusable auth key for each of the cluster proxies that it creates and puts in the tailscaled configfile mounted to the proxies. The proxies are always tagged, and their state is persisted in a Kubernetes Secret, so their node keys are expected to never be regenerated, so that they don't need to re-auth. Some tailnet configurations however have seen issues where the auth keys being left in the tailscaled configfile cause the proxies to end up in unauthorized state after a restart at a later point in time. Currently, we have not found a way to reproduce this issue, however this commit removes the auth key from the config once the proxy can be assumed to have logged in. If an existing, logged-in proxy is upgraded to this version, its redundant auth key will be removed from the conffile. If an existing, logged-in proxy is downgraded from this version to a previous version, it will work as before without re-issuing key as the previous code did not enforce that a key must be present. Updates tailscale/tailscale#13451 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	2 months ago
Tom Proctor	98f4dd9857	cmd/k8s-operator,k8s-operator,kube: Add TSRecorder CRD + controller (#13299 ) cmd/k8s-operator,k8s-operator,kube: Add TSRecorder CRD + controller Deploys tsrecorder images to the operator's cluster. S3 storage is configured via environment variables from a k8s Secret. Currently only supports a single tsrecorder replica, but I've tried to take early steps towards supporting multiple replicas by e.g. having a separate secret for auth and state storage. Example CR: ```yaml apiVersion: tailscale.com/v1alpha1 kind: Recorder metadata: name: rec spec: enableUI: true ``` Updates #13298 Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>	3 months ago
Irbe Krumina	ecd64f6ed9	cmd/k8s-operator,kube: set app name for Kubernetes Operator proxies (#13410 ) Updates tailscale/corp#22920 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	3 months ago
Tom Proctor	01a7726cf7	cmd/containerboot,cmd/k8s-operator: enable IPv6 for fqdn egress proxies (#12577 ) cmd/containerboot,cmd/k8s-operator: enable IPv6 for fqdn egress proxies Don't skip installing egress forwarding rules for IPv6 (as long as the host supports IPv6), and set headless services `ipFamilyPolicy` to `PreferDualStack` to optionally enable both IP families when possible. Note that even with `PreferDualStack` set, testing a dual-stack GKE cluster with the default DNS setup of kube-dns did not correctly set both A and AAAA records for the headless service, and instead only did so when switching the cluster DNS to Cloud DNS. For both IPv4 and IPv6 to work simultaneously in a dual-stack cluster, we require headless services to return both A and AAAA records. If the host doesn't support IPv6 but the FQDN specified only has IPv6 addresses available, containerboot will exit with error code 1 and an error message because there is no viable egress route. Fixes #12215 Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>	5 months ago
Tom Proctor	3099323976	cmd/k8s-operator,k8s-operator,go.{mod,sum}: publish proxy status condition for annotated services (#12463 ) Adds a new TailscaleProxyReady condition type for use in corev1.Service conditions. Also switch our CRDs to use metav1.Condition instead of ConnectorCondition. The Go structs are seralized identically, but it updates some descriptions and validation rules. Update k8s controller-tools and controller-runtime deps to fix the documentation generation for metav1.Condition so that it excludes comments and TODOs. Stop expecting the fake client to populate TypeMeta in tests. See kubernetes-sigs/controller-runtime#2633 for details of the change. Finally, make some minor improvements to validation for service hostnames. Fixes #12216 Co-authored-by: Irbe Krumina <irbe@tailscale.com> Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>	5 months ago
Irbe Krumina	807934f00c	cmd/k8s-operator,k8s-operator: allow proxies accept advertized routes. (#12388 ) Add a new .spec.tailscale.acceptRoutes field to ProxyClass, that can be optionally set to true for the proxies to accept routes advertized by other nodes on tailnet (equivalent of setting --accept-routes to true). Updates tailscale/tailscale#12322,tailscale/tailscale#10684 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	6 months ago
Irbe Krumina	d86d1e7601	cmd/k8s-operator,cmd/containerboot,ipn,k8s-operator: turn off stateful filter for egress proxies. (#12075 ) Turn off stateful filtering for egress proxies to allow cluster traffic to be forwarded to tailnet. Allow configuring stateful filter via tailscaled config file. Deprecate EXPERIMENTAL_TS_CONFIGFILE_PATH env var and introduce a new TS_EXPERIMENTAL_VERSIONED_CONFIG env var that can be used to provide containerboot a directory that should contain one or more tailscaled config files named cap-<tailscaled-cap-version>.hujson. Containerboot will pick the one with the newest capability version that is not newer than its current capability version. Proxies with this change will not work with older Tailscale Kubernetes operator versions - users must ensure that the deployed operator is at the same version or newer (up to 4 version skew) than the proxies. Updates tailscale/tailscale#12061 Signed-off-by: Irbe Krumina <irbe@tailscale.com> Co-authored-by: Maisem Ali <maisem@tailscale.com>	7 months ago
Irbe Krumina	7d9c3f9897	cmd/k8s-operator/deploy/manifests: check if IPv6 module is loaded before using it (#11867 ) Before attempting to enable IPv6 forwarding in the proxy init container check if the relevant module is found, else the container crashes on hosts that don't have it. Updates#11860 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	7 months ago
Irbe Krumina	df8f40905b	cmd/k8s-operator,k8s-operator: optionally serve tailscaled metrics on Pod IP (#11699 ) Adds a new .spec.metrics field to ProxyClass to allow users to optionally serve client metrics (tailscaled --debug) on <Pod-IP>:9001. Metrics cannot currently be enabled for proxies that egress traffic to tailnet and for Ingress proxies with tailscale.com/experimental-forward-cluster-traffic-via-ingress annotation (because they currently forward all cluster traffic to their respective backends). The assumption is that users will want to have these metrics enabled continuously to be able to monitor proxy behaviour (as opposed to enabling them temporarily for debugging). Hence we expose them on Pod IP to make it easier to consume them i.e via Prometheus PodMonitor. Updates tailscale/tailscale#11292 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	7 months ago
Irbe Krumina	3af0f526b8	cmd{containerboot,k8s-operator},util/linuxfw: support ExternalName Services (#11802 ) * cmd/containerboot,util/linuxfw: support proxy backends specified by DNS name Adds support for optionally configuring containerboot to proxy traffic to backends configured by passing TS_EXPERIMENTAL_DEST_DNS_NAME env var to containerboot. Containerboot will periodically (every 10 minutes) attempt to resolve the DNS name and ensure that all traffic sent to the node's tailnet IP gets forwarded to the resolved backend IP addresses. Currently: - if the firewall mode is iptables, traffic will be load balanced accross the backend IP addresses using round robin. There are no health checks for whether the IPs are reachable. - if the firewall mode is nftables traffic will only be forwarded to the first IP address in the list. This is to be improved. * cmd/k8s-operator: support ExternalName Services Adds support for exposing endpoints, accessible from within a cluster to the tailnet via DNS names using ExternalName Services. This can be done by annotating the ExternalName Service with tailscale.com/expose: "true" annotation. The operator will deploy a proxy configured to route tailnet traffic to the backend IPs that service.spec.externalName resolves to. The backend IPs must be reachable from the operator's namespace. Updates tailscale/tailscale#10606 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	7 months ago
Brad Fitzpatrick	7c1d6e35a5	all: use Go 1.22 range-over-int Updates #11058 Change-Id: I35e7ef9b90e83cac04ca93fd964ad00ed5b48430 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	8 months ago
Irbe Krumina	38fb23f120	cmd/k8s-operator,k8s-operator: allow users to configure proxy env vars via ProxyClass (#11743 ) Adds new ProxyClass.spec.statefulSet.pod.{tailscaleContainer,tailscaleInitContainer}.Env field that allow users to provide key, value pairs that will be set as env vars for the respective containers. Allow overriding all containerboot env vars, but warn that this is not supported and might break (in docs + a warning when validating ProxyClass). Updates tailscale/tailscale#10709 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	8 months ago
Irbe Krumina	b0c3e6f6c5	cmd/k8s-operator,ipn/conf.go: fix --accept-routes for proxies (#11453 ) Fix a bug where all proxies got configured with --accept-routes set to true. The bug was introduced in https://github.com/tailscale/tailscale/pull/11238. Updates#cleanup Signed-off-by: Irbe Krumina <irbe@tailscale.com>	9 months ago
Irbe Krumina	303125d96d	cmd/k8s-operator: configure all proxies with declarative config (#11238 ) Containerboot container created for operator's ingress and egress proxies are now always configured by passing a configfile to tailscaled (tailscaled --config <configfile-path>. It does not run 'tailscale set' or 'tailscale up'. Upgrading existing setups to this version as well as downgrading existing setups at this version works. Updates tailscale/tailscale#10869 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	9 months ago
Irbe Krumina	5bd19fd3e3	cmd/k8s-operator,k8s-operator: proxy configuration mechanism via a new ProxyClass custom resource (#11074 ) * cmd/k8s-operator,k8s-operator: introduce proxy configuration mechanism via ProxyClass custom resource. ProxyClass custom resource can be used to specify customizations for the proxy resources created by the operator. Add a reconciler that validates ProxyClass resources and sets a Ready condition to True or False with a corresponding reason and message. This is required because some fields (labels and annotations) require complex validations that cannot be performed at custom resource apply time. Reconcilers that use the ProxyClass to configure proxy resources are expected to verify that the ProxyClass is Ready and not proceed with resource creation if configuration from a ProxyClass that is not yet Ready is required. If a tailscale ingress/egress Service is annotated with a tailscale.com/proxy-class annotation, look up the corresponding ProxyClass and, if it is Ready, apply the configuration from the ProxyClass to the proxy's StatefulSet. If a tailscale Ingress has a tailscale.com/proxy-class annotation and the referenced ProxyClass custom resource is available and Ready, apply configuration from the ProxyClass to the proxy resources that will be created for the Ingress. Add a new .proxyClass field to the Connector spec. If connector.spec.proxyClass is set to a ProxyClass that is available and Ready, apply configuration from the ProxyClass to the proxy resources created for the Connector. Ensure that when Helm chart is packaged, the ProxyClass yaml is added to chart templates. Ensure that static manifest generator adds ProxyClass yaml to operator.yaml. Regenerate operator.yaml Signed-off-by: Irbe Krumina <irbe@tailscale.com>	10 months ago
Irbe Krumina	a6cc2fdc3e	cmd/{containerboot,k8s-operator/deploy/manifests}: optionally allow proxying cluster traffic to a cluster target via ingress proxy (#11036 ) * cmd/containerboot,cmd/k8s-operator/deploy/manifests: optionally forward cluster traffic via ingress proxy. If a tailscale Ingress has tailscale.com/experimental-forward-cluster-traffic-via-ingress annotation, configure the associated ingress proxy to have its tailscale serve proxy to listen on Pod's IP address. This ensures that cluster traffic too can be forwarded via this proxy to the ingress backend(s). In containerboot, if EXPERIMENTAL_PROXY_CLUSTER_TRAFFIC_VIA_INGRESS is set to true and the node is Kubernetes operator ingress proxy configured via Ingress, make sure that traffic from within the cluster can be proxied to the ingress target. Updates tailscale/tailscale#10499 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	10 months ago
Irbe Krumina	50b52dbd7d	cmd/k8s-operator: sync StatefulSet labels to their Pods (#10861 ) So that users have predictable label values to use when configuring network policies. Updates tailscale/tailscale#10854 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	11 months ago
Irbe Krumina	05093ea7d9	cmd/k8s-operator,k8s-operator: allow the operator to deploy exit nodes via Connector custom resource (#10724 ) cmd/k8s-operator/deploy/crds,k8s-operator/apis/v1alpha1: allow to define an exit node via Connector CR. Make it possible to define an exit node to be deployed to a Kubernetes cluster via Connector Custom resource. Also changes to Connector API so that one Connector corresponds to one Tailnet node that can be either a subnet router or an exit node or both. The Kubernetes operator parses Connector custom resource and, if .spec.isExitNode is set, configures that Tailscale node deployed for that connector as an exit node. Signed-off-by: Irbe Krumina <irbe@tailscale.com> Co-authored-by: Anton Tolchanov <anton@tailscale.com>	11 months ago

20 Commits (3f626c0d774bc1b8a93be26a4aa8f2dadeb27ece)