Commit Graph

1221 Commits (3f16dec1bb06b1d37ac01a09fcb10fa9950719d5)

Author SHA1 Message Date
Brad Fitzpatrick 69b535c01f wgengine/netstack: replace a 1500 with a const + doc
Per post-submit code review feedback of 1336fb740b from @maisem.

Change-Id: Ic5c16306cbdee1029518448642304981f77ea1fd
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2 years ago
Brad Fitzpatrick 1336fb740b wgengine/netstack: make netstack MTU be 1280 also
Updates #3878

Change-Id: I1850085b32c8a40d85607b4ad433622c97d96a8d
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2 years ago
Tom 2903d42921
wgengine/router: delete hardcoded link-local address on Windows (#4740)
Fixes #4647

It seems that Windows creates a link-local address for the TUN driver, seemingly
based on the (fixed) adapter GUID. This results in a fixed MAC address, which
for some reason doesn't handle loopback correctly. Given the derived link-local
address is preferred for lookups (thanks LLMNR), traffic which addresses the
current node by hostname uses this broken address and never works.

To address this, we remove the broken link-local address from the wintun adapter.

Signed-off-by: Tom DNetto <tom@tailscale.com>
3 years ago
Tom fc5839864b
wgengine/netstack: handle multiple magicDNS queries per UDP socket (#4708)
Fixes: #4686

Signed-off-by: Tom DNetto <tom@tailscale.com>
3 years ago
Tom 9343967317
wgengine/filter: preallocate some hot slices in MatchesFromFilterRules (#4672)
Profiling identified this as a fairly hot path for growing a slice.

Given this is only used in control & when a new packet filter is received, this shouldnt be hot in the client.
3 years ago
Mihai Parparita 561f7be434 wgengine/magicsock: remove unused metric
We don't increment the metricRecvData anywhere, just the per-protocol
ones.

Signed-off-by: Mihai Parparita <mihai@tailscale.com>
3 years ago
Mihai Parparita 86069874c9 net/tstun, wgengine: use correct type for counter metrics
We were marking them as gauges, but they are only ever incremented,
thus counter is more appropriate.

Signed-off-by: Mihai Parparita <mihai@tailscale.com>
3 years ago
Maisem Ali fd99c54e10 tailcfg,all: change structs to []*dnstype.Resolver
Signed-off-by: Maisem Ali <maisem@tailscale.com>
3 years ago
Maisem Ali e409e59a54 cmd/cloner,util/codegen: refactor cloner internals to allow reuse
Also run go generate again for Copyright updates.

Signed-off-by: Maisem Ali <maisem@tailscale.com>
3 years ago
Brad Fitzpatrick 35111061e9 wgengine/netstack, ipn/ipnlocal: serve http://100.100.100.100/
For future stuff.

Change-Id: I64615b8b2ab50b57e4eef1ca66fa72e3458cb4a9
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Tom d1d6ab068e
net/dns, wgengine: implement DNS over TCP (#4598)
* net/dns, wgengine: implement DNS over TCP

Signed-off-by: Tom DNetto <tom@tailscale.com>

* wgengine/netstack: intercept only relevant port/protocols to quad-100

Signed-off-by: Tom DNetto <tom@tailscale.com>
3 years ago
James Tucker f9e86e64b7 *: use WireGuard where logged, printed or named
Signed-off-by: James Tucker <james@tailscale.com>
3 years ago
James Tucker ae483d3446 wgengine, net/packet, cmd/tailscale: add ICMP echo
Updates tailscale/corp#754

Signed-off-by: James Tucker <james@tailscale.com>
3 years ago
Tom DNetto 2a0b5c21d2 net/dns/{., resolver}, wgengine: fix goroutine leak on shutdown
Signed-off-by: Tom DNetto <tom@tailscale.com>
3 years ago
Tom DNetto 7f45734663 assorted: documentation and readability fixes
This were intended to be pushed to #4408, but in my excitement I
forgot to git push :/ better late than never.

Signed-off-by: Tom DNetto <tom@tailscale.com>
3 years ago
Tom DNetto 9e77660931 net/tstun,wgengine/{.,netstack}: handle UDP magicDNS traffic in netstack
This change wires netstack with a hook for traffic coming from the host
into the tun, allowing interception and handling of traffic to quad-100.

With this hook wired, magicDNS queries over UDP are now handled within
netstack. The existing logic in wgengine to handle magicDNS remains for now,
but its hook operates after the netstack hook so the netstack implementation
takes precedence. This is done in case we need to support platforms with
netstack longer than expected.

Signed-off-by: Tom DNetto <tom@tailscale.com>
3 years ago
Tom DNetto dc71d3559f net/tstun,wgengine: split PreFilterOut into multiple hooks
A subsequent commit implements handling of magicDNS traffic via netstack.
Implementing this requires a hook for traffic originating from the host and
hitting the tun, so we make another hook to support this.

Signed-off-by: Tom DNetto <tom@tailscale.com>
3 years ago
Tom DNetto 9dee6adfab cmd/tailscaled,ipn/ipnlocal,wgengine/...: pass dns.Manager into netstack
Needed for a following commit which moves magicDNS handling into
netstack.

Signed-off-by: Tom DNetto <tom@tailscale.com>
3 years ago
Brad Fitzpatrick 6bed781259 all: gofmt all
Well, goimports actually (which adds the normal import grouping order we do)

Change-Id: I0ce1b1c03185f3741aad67c14a7ec91a838de389
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
James Tucker 1aa75b1c9e wgengine/netstack: always set TCP keepalive
Setting keepalive ensures that idle connections will eventually be
closed. In userspace mode, any application configured TCP keepalive is
effectively swallowed by the host kernel, and is not easy to detect.
Failure to close connections when a peer tailscaled goes offline or
restarts may result in an otherwise indefinite connection for any
protocol endpoint that does not initiate new traffic.

This patch does not take any new opinion on a sensible default for the
keepalive timers, though as noted in the TODO, doing so likely deserves
further consideration.

Update #4522

Signed-off-by: James Tucker <james@tailscale.com>
3 years ago
Maisem Ali 80ba161c40 wgengine/monitor: do not ignore changes to pdp_ip*
One current theory (among other things) on battery consumption is that
magicsock is resorting to using the IPv6 over LTE even on WiFi.
One thing that could explain this is that we do not get link change updates
for the LTE modem as we ignore them in this list.
This commit makes us not ignore changes to `pdp_ip` as a test.

Updates #3363

Signed-off-by: Maisem Ali <maisem@tailscale.com>
3 years ago
Maisem Ali 2265587d38 wgengine/{,magicsock}: add metrics for rebinds and restuns
Signed-off-by: Maisem Ali <maisem@tailscale.com>
3 years ago
Brad Fitzpatrick 910ae68e0b util/mak: move tailssh's mapSet into a new package for reuse elsewhere
Change-Id: Idfe95db82275fd2be6ca88f245830731a0d5aecf
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Brad Fitzpatrick 53588f632d Revert "wgengine/router,util/kmod: load & log xt_mark"
This reverts commit 8d6793fd70.

Reason: breaks Android build (cgo/pthreads addition)

We can try again next cycle.

Change-Id: I5e7e1730a8bf399a8acfce546a6d22e11fb835d5
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
James Tucker 8d6793fd70 wgengine/router,util/kmod: load & log xt_mark
Attempt to load the xt_mark kernel module when it is not present. If the
load fails, log error information.

It may be tempting to promote this failure to an error once it has been
in use for some time, so as to avoid reaching an error with the iptables
invocation, however, there are conditions under which the two stages may
disagree - this change adds more useful breadcrumbs.

Example new output from tailscaled running under my WSL2:

```
router: ensure module xt_mark: "/usr/sbin/modprobe xt_mark" failed: exit status 1; modprobe: FATAL: Module xt_mark not found in directory /lib/modules/5.10.43.3-microsoft-standard-WSL2
```

Background:

There are two places to lookup modules, one is `/proc/modules` "old",
the other is `/sys/module/` "new".

There was query_modules(2) in linux <2.6, alas, it is gone.

In a docker container in the default configuration, you would get
/proc/modules and /sys/module/ both populated. lsmod may work file,
modprobe will fail with EPERM at `finit_module()` for an unpriviliged
container.

In a priviliged container the load may *succeed*, if some conditions are
met. This condition should be avoided, but the code landing in this
change does not attempt to avoid this scenario as it is both difficult
to detect, and has a very uncertain impact.

In an nspawn container `/proc/modules` is populated, but `/sys/module`
does not exist. Modern `lsmod` versions will fail to gather most module
information, without sysfs being populated with module information.

In WSL2 modules are likely missing, as the in-use kernel typically is
not provided by the distribution filesystem, and WSL does not mount in a
module filesystem of its own. Notably the WSL2 kernel supports iptables
marks without listing the xt_mark module in /sys/module, and
/proc/modules is empty.

On a recent kernel, we can ask the capabilities system about SYS_MODULE,
that will help to disambiguate between the non-privileged container case
and just being root. On older kernels these calls may fail.

Update #4329

Signed-off-by: James Tucker <james@tailscale.com>
3 years ago
Maisem Ali 136f30fc92 wgengine/monitor: split the unexpected stringification log line
It unfortuantely gets truncated because it's too long, split it into 3
different log lines to circumvent truncation.

Signed-off-by: Maisem Ali <maisem@tailscale.com>
3 years ago
Maisem Ali 8e40bfc6ea wgengine/monitor: ignore OS-specific uninteresting interfaces
Currently we ignore these interfaces in the darwin osMon but then would consider it
interesting when checking if anything had changed.

Signed-off-by: Maisem Ali <maisem@tailscale.com>
3 years ago
Brad Fitzpatrick 0ce67ccda6 wgengine/router: make supportsV6NAT check catch more cases
Updates #4459

Change-Id: Ic27621569d2739298e652769d10e38608c6012be
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Maisem Ali 3ffd88a84a wgengine/monitor: do not set timeJumped on iOS/Android
In `(*Mon).Start` we don't run a timer to update `(*Mon).lastWall` on iOS and
Android as their sleep patterns are bespoke. However, in the debounce
goroutine we would notice that the the wall clock hadn't been updated
since the last event would assume that a time jump had occurred. This would
result in non-events being considered as major-change events.

This commit makes it so that `(*Mon).timeJumped` is never set to `true`
on iOS and Android.

Signed-off-by: Maisem Ali <maisem@tailscale.com>
3 years ago
Brad Fitzpatrick 16f3520089 all: add arbitrary capability support
Updates #4217

RELNOTE=start of WhoIsResponse capability support

Change-Id: I6522998a911fe49e2f003077dad6164c017eed9b
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Brad Fitzpatrick 8ee044ea4a ssh/tailssh: make the SSH server a singleton, register with LocalBackend
Remove the weird netstack -> tailssh dependency and instead have tailssh
register itself with ipnlocal when linked.

This makes tailssh.server a singleton, so we can have a global map of
all sessions.

Updates #3802

Change-Id: Iad5caec3a26a33011796878ab66b8e7b49339f29
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Brad Fitzpatrick da14e024a8 tailcfg, ssh/tailssh: optionally support SSH public keys in wire policy
And clean up logging.

Updates #3802

Change-Id: I756dc2d579a16757537142283d791f1d0319f4f0
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Brad Fitzpatrick 3ae701f0eb net/tsaddr, wgengine/netstack: add IPv6 range that forwards to site-relative IPv4
This defines a new magic IPv6 prefix, fd7a:115c:a1e0:b1a::/64, a
subset of our existing /48, where the final 32 bits are an IPv4
address, and the middle 32 bits are a user-chosen "site ID". (which
must currently be 0000:00xx; the top 3 bytes must be zero for now)

e.g., I can say my home LAN's "site ID" is "0000:00bb" and then
advertise its 10.2.0.0/16 IPv4 range via IPv6, like:

    tailscale up --advertise-routes=fd7a:115c:a1e0:b1a::bb:10.2.0.0/112

(112 being /128 minuse the /96 v6 prefix length)

Then people in my tailnet can:

     $ curl '[fd7a:115c:a1e0:b1a::bb:10.2.0.230]'
     <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" ....

Updates #3616, etc

RELNOTE=initial support for TS IPv6 addresses to route v4 "via" specific nodes

Change-Id: I9b49b6ad10410a24b5866b9fbc69d3cae1f600ef
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
James Tucker f4aad61e67 wgengine/monitor: ignore duplicate RTM_NEWADDRs
Ignoring the events at this layer is the simpler path for right now, a
broader change should follow to suppress irrelevant change events in a
higher layer so as to avoid related problems with other monitoring paths
on other platforms.  This approach may also carry a small risk that it
applies an at-most-once invariant low in the chain that could be assumed
otherwise higher in the code.

I adjusted the newAddrMessage type to include interface index rather
than a label, as labels are not always supplied, and in particular on my
test hosts they were consistently missing for ipv6 address messages.

I adjusted the newAddrMessage.Addr field to be populated from
Attributes.Address rather than Attributes.Local, as again for ipv6
.Local was always empty, and with ipv4 the .Address and .Local contained
the same contents in each of my test environments.

Update #4282

Signed-off-by: James Tucker <james@tailscale.com>
3 years ago
James Tucker 2f69c383a5 wgengine/monitor: add envknob TS_DEBUG_NETLINK
While I trust the test behavior, I also want to assert the behavior in a
reproduction environment, this envknob gives me the log information I
need to do so.

Update #4282

Signed-off-by: James Tucker <james@tailscale.com>
3 years ago
Tom 24bdcbe5c7
net/dns, net/dns/resolver, wgengine: refactor DNS request path (#4364)
* net/dns, net/dns/resolver, wgengine: refactor DNS request path

Previously, method calls into the DNS manager/resolver types handled DNS
requests rather than DNS packets. This is fine for UDP as one packet
corresponds to one request or response, however will not suit an
implementation that supports DNS over TCP.

To support PRs implementing this in the future, wgengine delegates
all handling/construction of packets to the magic DNS endpoint, to
the DNS types themselves. Handling IP packets at this level enables
future support for both UDP and TCP.

Signed-off-by: Tom DNetto <tom@tailscale.com>
3 years ago
James Tucker c6ac29bcc4
wgengine/netstack: disable refsvfs2 leak tracking (#4378)
In addition an envknob (TS_DEBUG_NETSTACK_LEAK_MODE) now provides access
to set leak tracking to more useful values.

Fixes #4309

Signed-off-by: James Tucker <james@tailscale.com>
3 years ago
Brad Fitzpatrick e4d8d5e78b net/packet, wgengine/netstack: remove workaround for old gvisor ECN bug
Fixes #2642

Change-Id: Ic02251d24a4109679645d1c8336e0f961d0cce13
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Maisem Ali 6fecc16c3b ipn/ipnlocal: do not process old status messages received out of order
When `setWgengineStatus` is invoked concurrently from multiple
goroutines, it is possible that the call invoked with a newer status is
processed before a call with an older status. e.g. a status that has
endpoints might be followed by a status without endpoints. This causes
unnecessary work in the engine and can result in packet loss.

This patch adds an `AsOf time.Time` field to the status to specifiy when the
status was calculated, which later allows `setWgengineStatus` to ignore
any status messages it receives that are older than the one it has
already processed.

Updates tailscale/corp#2579

Signed-off-by: Maisem Ali <maisem@tailscale.com>
3 years ago
James Tucker 445c04c938
wgengine: inject packetbuffers rather than bytes (#4220)
Plumb the outbound injection path to allow passing netstack
PacketBuffers down to the tun Read, where they are decref'd to enable
buffer re-use. This removes one packet alloc & copy, and reduces GC
pressure by pooling outbound injected packets.

Fixes #2741
Signed-off-by: James Tucker <james@tailscale.com>
3 years ago
Brad Fitzpatrick f2041c9088 all: use strings.Cut even more
Change-Id: I943ce72c6f339589235bddbe10d07799c4e37979
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Josh Bleecher Snyder 0868329936 all: use any instead of interface{}
My favorite part of generics.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
3 years ago
Josh Bleecher Snyder 5f176f24db go.mod: upgrade to the latest wireguard-go
This pulls in a handful of fixes and an update to Go 1.18.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
3 years ago
Brad Fitzpatrick 61ee72940c all: use Go 1.18's strings.Cut
More remain.

Change-Id: I6ec562cc1f687600758deae1c9d7dbd0d04004cb
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Josh Bleecher Snyder 1b57b0380d wgengine/magicsock: remove final alloc from ReceiveFrom
And now that we don't have to play escape analysis and inlining games,
simplify the code.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
3 years ago
Josh Bleecher Snyder 08cf54f386 wgengine/magicsock: fix goMajorVersion for 1.18 ts release
The version string changed slightly. Adapt.
And always check the current Go version to prevent future
accidental regressions. I would have missed this one had
I not explicitly manually checked it.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
3 years ago
Maisem Ali 07f48a7bfe wgengine: handle nil netmaps when assigning isSubnetRouter.
Fixes tailscale/coral#51

Signed-off-by: Maisem Ali <maisem@tailscale.com>
3 years ago
Brad Fitzpatrick 26f27a620a wgengine/router: delete legacy netfilter rule cleanup [Linux]
This was just cleanup for an ancient version of Tailscale. Any such machines
have upgraded since then.

Change-Id: Iadcde05b37c2b867f92e02ec5d2b18bf2b8f653a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Brad Fitzpatrick c9eca9451a ssh: make it build on darwin
For local dev testing initially. Product-wise, it'll probably only be
workable on the two unsandboxed builds.

Updates #3802

Change-Id: Ic352f966e7fb29aff897217d79b383131bf3f92b
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Maisem Ali 72d8672ef7 tailcfg: make Node.Hostinfo a HostinfoView
Signed-off-by: Maisem Ali <maisem@tailscale.com>
3 years ago
Brad Fitzpatrick 1b87e025e9 ssh/tailssh: move SSH code from wgengine/netstack to this new package
Still largely incomplete, but in a better home now.

Updates #3802

Change-Id: I46c5ffdeb12e306879af801b06266839157bc624
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Brad Fitzpatrick 2db6cd1025 ipn/ipnlocal, wgengine/magicsock, logpolicy: quiet more logs
Updates #1548

Change-Id: Ied169f872e93be2857890211f2e018307d4aeadc
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Brad Fitzpatrick 86a902b201 all: adjust some log verbosity
Updates #1548

Change-Id: Ia55f1b5dc7dfea09a08c90324226fb92cd10fa00
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Brad Fitzpatrick 6eed2811b2 wgengine/netstack: start supporting different SSH users
Updates #3802

Change-Id: I44de6897e36b1362cd74c9b10c9cbfeb9abc3dbc
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Brad Fitzpatrick bd90781b34 ipn/ipnlocal, wgengine/netstack: use netstack for peerapi server
We're finding a bunch of host operating systems/firewalls interact poorly
with peerapi. We either get ICMP errors from the host or users need to run
commands to allow the peerapi port:

https://github.com/tailscale/tailscale/issues/3842#issuecomment-1025133727

... even though the peerapi should be an internal implementation detail.

Rather than fight the host OS & firewalls, this change handles the
server side of peerapi entirely in netstack (except on iOS), so it
never makes its way to the host OS where it might be messed with. Two
main downsides are:

1) netstack isn't as fast, but we don't really need speed for peerapi.
   And actually, with fewer trips to/from the kernel, we might
   actually make up for some of the netstack performance loss by
   staying in userspace.

2) tcpdump / Wireshark etc packet captures will no longer see the peerapi
   traffic. Oh well. Crawshaw's been wanting to add packet capture server
   support to tailscaled, so we'll probably do that sooner now.

A future change might also then use peerapi for the client-side
(except on iOS).

Updates #3842 (probably fixes, as well as many exit node issues I bet)

Change-Id: Ibc25edbb895dc083d1f07bd3cab614134705aa39
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Brad Fitzpatrick 730aa1c89c derp/derphttp, wgengine/magicsock: prefer IPv6 to DERPs when IPv6 works
Fixes #3838

Change-Id: Ie47a2a30c7e8e431512824798d2355006d72fb6a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Brad Fitzpatrick 1af26222b6 go.mod: bump netstack, switch to upstream netstack
Now that Go 1.17 has module graph pruning
(https://go.dev/doc/go1.17#go-command), we should be able to use
upstream netstack without breaking our private repo's build
that then depends on the tailscale.com Go module.

This is that experiment.

Updates #1518 (the original bug to break out netstack to own module)
Updates #2642 (this updates netstack, but doesn't remove workaround)

Change-Id: I27a252c74a517053462e5250db09f379de8ac8ff
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
David Anderson 7a18fe3dca wgengine/magicsock: make debugUseDerpRoute an opt.Bool.
Can still be constant, just needs the extra methods.

Fixes #3812

Signed-off-by: David Anderson <danderson@tailscale.com>
3 years ago
Brad Fitzpatrick f3c0023add wgengine/netstack: add an SSH server experiment
Disabled by default.

To use, run tailscaled with:

    TS_SSH_ALLOW_LOGIN=you@bar.com

And enable with:

    $ TAILSCALE_USE_WIP_CODE=true tailscale up --ssh=true

Then ssh [any-user]@[your-tailscale-ip] for a root bash shell.
(both the "root" and "bash" part are temporary)

Updates #3802

Change-Id: I268f8c3c95c8eed5f3231d712a5dc89615a406f0
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Brad Fitzpatrick 41fd4eab5c envknob: add new package for all the strconv.ParseBool(os.Getenv(..))
A new package can also later record/report which knobs are checked and
set. It also makes the code cleaner & easier to grep for env knobs.

Change-Id: Id8a123ab7539f1fadbd27e0cbeac79c2e4f09751
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Brad Fitzpatrick c64af5e676 wgengine/netstack: clear TCP ECN bits before giving to gvisor
Updates #2642

Change-Id: Ic219442a2656dd9dc99ae1dd91e907fd3d924987
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Josh Bleecher Snyder de4696da10 wgengine/magicsock: fix deadlock on shutdown
This fixes a deadlock on shutdown.
One goroutine is waiting to send on c.derpRecvCh before unlocking c.mu.
The other goroutine is waiting to lock c.mu before receiving from c.derpRecvCh.

#3736 has a more detailed explanation of the sequence of events.

Fixes #3736

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
3 years ago
Brad Fitzpatrick 185825df11 wgengine/netstack: add a missing refcount decrement after packet injection
Fixes #3762
Updates #3745 (probably fixes?)

Change-Id: I1d3f0590fd5b8adfbc9110bc45ff717bb9e79aae
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Brad Fitzpatrick 790e41645b wgengine/netstack: add an Impl.Close method for tests
Change-Id: Idbb3fd6d749d3e4effdf96de77a1106584822fef
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Brad Fitzpatrick 166fe3fb12 wgengine/netstack: add missing error logging in a RST case
Updates #2642

Change-Id: I9f2f8fd28fc980208b0739eb9caf9db7b0977c09
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Brad Fitzpatrick 6be48dfcc6 wgengine/netstack: fix netstack ping timeout on darwin
-W is milliseconds on darwin, not seconds, and empirically it's
milliseconds after a 1 second base.

Change-Id: I2520619e6699d9c505d9645ce4dfee4973555227
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Brad Fitzpatrick 5404a0557b wgengine/magicsock: remove a per-DERP-packet map lookup in common case
Updates #150

Change-Id: Iffb6eccbe7ca97af97d29be63b7e37d487b3ba28
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Brad Fitzpatrick 5a317d312d wgengine/magicsock: enable DERP Return Path Optimization (DRPO)
Turning this on at the beginning of the 1.21.x dev cycle, for 1.22.

Updates #150

Change-Id: I1de567cfe0be3df5227087de196ab88e60c9eb56
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Brad Fitzpatrick c6c39930cc wgengine/magicsock: fix lock ordering deadlock with derphttp
Fixes #3726

Change-Id: I32631a44dcc1da3ae47764728ec11ace1c78190d
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Brad Fitzpatrick a93937abc3 wgengine/netstack: make userspace ping work when tailscaled has CAP_NET_RAW
Updates #3710

Change-Id: Ief56c7ac20f5f09a2f940a1906b9efbf1b0d6932
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Brad Fitzpatrick 1a4e8da084 wgengine/netstack: fake pings through netstack on Android too
Every OS ping binary is slightly different. Adjust for Android's.

Updates #1738

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Brad Fitzpatrick 1b426cc232 wgengine/netstack: add env knob to turn on netstack debug logs
Except for the super verbose packet-level dumps. Keep those disabled
by default with a const.

Updates #2642

Change-Id: Ia9eae1677e8b3fe6f457a59e44896a335d95d547
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Brad Fitzpatrick addda5b96f wgengine/magicsock: fix watchdog timeout on Close when IPv6 not available
The blockForeverConn was only using its sync.Cond one side. Looks like it
was just forgotten.

Fixes #3671

Change-Id: I4ed0191982cdd0bfd451f133139428a4fa48238c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Brad Fitzpatrick 28bf53f502 wgengine/magicsock: reduce disco ping heartbeat aggressiveness a bit
Bigger changes coming later, but this should improve things a bit in
the meantime.

Rationale:

* 2 minutes -> 45 seconds: 2 minutes was overkill and never considered
  phones/battery at the time. It was totally arbitrary. 45 seconds is
  also arbitrary but is less than 2 minutes.

* heartbeat from 2 seconds to 3 seconds: in practice this meant two
  packets per second (2 pings and 2 pongs every 2 seconds) because the
  other side was also pinging us every 2 seconds on their own.
  That's just overkill. (see #540 too)

So in the worst case before: when we sent a single packet (say: a DNS
packet), we ended up sending 61 packets over 2 minutes: the 1 DNS
query and then then 60 disco pings (2 minutes / 2 seconds) & received
the same (1 DNS response + 60 pongs).  Now it's 15. In 1.22 we plan to
remove this whole timer-based heartbeat mechanism entirely.

The 5 seconds to 6.5 seconds change is just stretching out that
interval so you can still miss two heartbeats (other 3 + 3 seconds
would be greater than 5 seconds). This means that if your peer moves
without telling you, you can have a path out for 6.5 seconds
now instead of 5 seconds before disco finds a new one. That will also
improve in 1.22 when we start doing UDP+DERP at the same time
when confidence starts to go down on a UDP path.

Updates #3363

Change-Id: Ic2314bbdaf42edcdd7103014b775db9cf4facb47
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Brad Fitzpatrick a201b89e4a wgengine/magicsock: reconnect to DERP when its definition changes
Change-Id: I7c560feb9e4a6e155a35ec764a68354f19f694e4
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Brad Fitzpatrick 506c727e30 ipnlocal, net/{dns,tsaddr,tstun}, wgengine: support MagicDNS on IPv6
Fixes #3660

RELNOTE=MagicDNS now works over IPv6 when CGNAT IPv4 is disabled.

Change-Id: I001e983df5feeb65289abe5012dedd177b841b45
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Brad Fitzpatrick 7d9b1de3aa netcheck,portmapper,magicsock: ignore some UDP write errors on Linux
Treat UDP send EPERM errors as a lost UDP packet, not something super
fatal. That's just the Linux firewall preventing it from going out.

And add a leaf package net/neterror for that (and future) policy that
all three packages can share, with tests.

Updates #3619

Change-Id: Ibdb838c43ee9efe70f4f25f7fc7fdf4607ba9c1d
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Brad Fitzpatrick 2c94e3c4ad wgengine/magicsock: don't unconditionally close DERP connections on rebind
Only if the source address isn't on the currently active interface or
a ping of the DERP server fails.

Updates #3619

Change-Id: I6bf06503cff4d781f518b437c8744ac29577acc8
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Brad Fitzpatrick ae319b4636 wgengine/magicsock: add HTML debug handler to see magicsock state
Change-Id: Ibc46f4e9651e1c86ec6f5d139f5e9bdc7a488415
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Brad Fitzpatrick c7f5bc0f69 wgengine/magicsock: add metrics for sent disco messages
We only tracked the transport type (UDP vs DERP), not what they were.

Change-Id: Ia4430c1c53afd4634e2d9893d96751a885d77955
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Brad Fitzpatrick 5a9914a92f wgengine/netstack: don't remove 255.255.255.255/32 from netstack
The intent of the updateIPs code is to add & remove IP addresses
to netstack based on what we get from the netmap.

But netstack itself adds 255.255.255.255/32 apparently and we always
fight it (and it adds it back?). So stop fighting it.

Updates #2642 (maybe fixes? maybe.)

Change-Id: I37cb23f8e3f07a42a1a55a585689ca51c2be7c60
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Josh Bleecher Snyder 93ae11105d ipn/ipnlocal: clear magicsock's netmap on logout
magicsock was hanging onto its netmap on logout,
which caused tailscale status to display partial
information about a bunch of zombie peers.
After logout, there should be no peers.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
3 years ago
Brad Fitzpatrick 6590fc3a94 wgengine/netstack: remove some logging on forwarding connections
Change-Id: Ib1165b918cd5da38583f8e7d4be8cda54af3c81d
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Brad Fitzpatrick 486059589b all: gofmt -w -s (simplify) tests
And it updates the build tag style on a couple files.

Change-Id: I84478d822c8de3f84b56fa1176c99d2ea5083237
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Maisem Ali d24a8f7b5a wgengine/router{windows}: return the output from the firewallTweaker
on error.

While debugging a customer issue where the firewallTweaker was failing
the only message we have is `router: firewall: error adding
Tailscale-Process rule: exit status 1` which is not really helpful.
This will help diagnose firewall tweaking failures.

Signed-off-by: Maisem Ali <maisem@tailscale.com>
3 years ago
Brad Fitzpatrick b59e7669c1 wgengine/netstack: in netstack/hybrid mode, fake ICMP using ping command
Change-Id: I42cb4b9b326337f4090d9cea532230e36944b6cb
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Brad Fitzpatrick 7b9c7bc42b ipn/ipnstate: remove old deprecated TailAddr IPv4-only field
It's been a bunch of releases now since the TailscaleIPs slice
replacement was added.

Change-Id: I3bd80e1466b3d9e4a4ac5bedba8b4d3d3e430a03
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Denton Gentry 878a20df29 net/dns: add GetBaseConfig to CallbackRouter.
Allow users of CallbackRouter to supply a GetBaseConfig
implementation. This is expected to be used on Android,
which currently lacks both a) platform support for
Split-DNS and b) a way to retrieve the current DNS
servers.

iOS/macOS also use the CallbackRouter but have platform
support for SplitDNS, so don't need getBaseConfig.

Updates https://github.com/tailscale/tailscale/issues/2116
Updates https://github.com/tailscale/tailscale/issues/988

Signed-off-by: Denton Gentry <dgentry@tailscale.com>
3 years ago
Todd Neal eeccbccd08 support running in a FreeBSD jail
Since devd apparently can't be made to work in a FreeBSD jail
fall back to polling.

Fixes tailscale#2858

Signed-off-by: Todd Neal <todd@tneal.org>
3 years ago
Brad Fitzpatrick 69de3bf7bf wgengine/filter: let unknown IPProto match if IP okay & match allows all ports
RELNOTE=yes

Change-Id: I96eaf3cf550cee7bb6cdb4ad81fc761e280a1b2a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Brad Fitzpatrick 9c5c9d0a50 ipn/ipnlocal, net/tsdial: make SOCKS/HTTP dials use ExitDNS
And simplify, unexport some tsdial/netstack stuff in the the process.

Fixes #3475

Change-Id: I186a5a5cbd8958e25c075b4676f7f6e70f3ff76e
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Brad Fitzpatrick adc5997592 net/tsdial: give netstack a Dialer, start refactoring name resolution
This starts to refactor tsdial.Dialer's name resolution to have
different stages: in-memory MagicDNS vs system resolution. A future
change will plug in ExitDNS resolution.

This also plumbs a Dialer into netstack and unexports the dnsMap
internals.

And it removes some of the async AddNetworkMapCallback usage and
replaces it with synchronous updates of the Dialer's netmap
from LocalBackend, since the LocalBackend has the Dialer too.

Updates #3475

Change-Id: Idcb7b1169878c74f0522f5151031ccbc49fe4cb4
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Brad Fitzpatrick ad3d6e31f0 net/tsdial: move macOS/iOS peerapi sockopt logic from LocalBackend
Change-Id: I812cae027c40c70cdc701427b1a1850cd9bcd60c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Brad Fitzpatrick c7fb26acdb net/tsdial: also plumb TUN name and monitor into tsdial.Dialer
In prep for moving stuff out of LocalBackend.

Change-Id: I9725aa9c3ebc7275f8c40e040b326483c0340127
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Brad Fitzpatrick c37af58ea4 net/tsdial: move more weirdo dialing into new tsdial package, plumb
Not done yet, but this move more of the outbound dial special casing
from random packages into tsdial, which aspires to be the one unified
place for all outbound dialing shenanigans.

Then this plumbs it all around, so everybody is ultimately
holding on to the same dialer.

As of this commit, macOS/iOS using an exit node should be able to
reach to the exit node's DoH DNS proxy over peerapi, doing the sockopt
to stay within the Network Extension.

A number of steps remain, including but limited to:

* move a bunch more random dialing stuff

* make netstack-mode tailscaled be able to use exit node's DNS proxy,
  teaching tsdial's resolver to use it when an exit node is in use.

Updates #1713

Change-Id: I1e8ee378f125421c2b816f47bc2c6d913ddcd2f5
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Brad Fitzpatrick bf1d69f25b wgengine/monitor: fix docs on Mon.InterfaceState
The behavior was changed in March (in 7f174e84e6)
but that change forgot to update these docs.

Change-Id: I79c0301692c1d13a4a26641cc5144baf48ec1360
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Brad Fitzpatrick d5405c66b7 net/tsdial: start of new package to unify all outbound dialing complexity
For now this just deletes the net/socks5/tssocks implementation (and
the DNSMap stuff from wgengine/netstack) and moves it into net/tsdial.

Then initialize a Dialer early in tailscaled, currently only use for the
outbound and SOCKS5 proxies. It will be plumbed more later. Notably, it
needs to get down into the DNS forwarder for exit node DNS forwading
in netstack mode. But it will also absorb all the peerapi setsockopt
and netns Dial and tlsdial complexity too.

Updates #1713

Change-Id: Ibc6d56ae21a22655b2fa1002d8fc3f2b2ae8b6df
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Brad Fitzpatrick bb91cfeae7 net/socks5/tssocks, wgengine: permit SOCKS through subnet routers/exit nodes
Fixes #1970

Change-Id: Ibef45e8796e1d9625716d72539c96d1dbf7b1f76
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Brad Fitzpatrick ff9727c9ff wgengine/filter: fix, test NewAllowAllForTest
I probably broke it when SCTP support was added but nothing apparently
ever used NewAllowAllForTest so it wasn't noticed when it broke.

Change-Id: Ib5a405be233d53cb7fcc61d493ae7aa2d1d590a2
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
David Anderson 33c541ae30 ipn/ipnlocal: populate self status from netmap in ipnlocal, not magicsock.
Fixes #1933

Signed-off-by: David Anderson <danderson@tailscale.com>
3 years ago
Brad Fitzpatrick 283ae702c1 ipn/ipnlocal: start adding DoH DNS server to peerapi when exit node
Updates #1713

Change-Id: I8d9c488f779e7acc811a9bc18166a2726198a429
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Josh Bleecher Snyder ad5e04249b wgengine/monitor: ignore adding/removing uninteresting IPs
One of the most common "unexpected" log lines is:

"network state changed, but stringification didn't"

One way that this can occur is if an interesting interface
(non-Tailscale, has interesting IP address)
gains or loses an uninteresting IP address (link local or loopback).

The fact that the interface is interesting is enough for EqualFiltered
to inspect it. The fact that an IP address changed is enough for
EqualFiltered to declare that the interfaces are not equal.

But the State.String method reasonably declines to print any
uninteresting IP addresses. As a result, the network state appears
to have changed, but the stringification did not.

The String method is correct; nothing interesting happened.

This change fixes this by adding an IP address filter to EqualFiltered
in addition to the interface filter. This lets the network monitor
ignore the addition/removal of uninteresting IP addresses.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
3 years ago
Brad Fitzpatrick e8db43e8fa wgengine/router: demote TestDebugListRules fail to skip
Updates #3360

Change-Id: Ic5c98ea03f3171c13ab9293a0ae74d17fd04d149
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Brad Fitzpatrick 2ea765e5d8 go.mod: bump inet.af/netstack
Updates #2642 (I'd hoped, but doesn't seem to fix it)

Change-Id: Id54af7c90a1206bc7018215957e20e954782b911
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Brad Fitzpatrick 946dfec98a wgengine/router: fix checkIPRuleSupportsV6 to actually use IPv6
Updates #3358 (should fix it)
Updates #391

Change-Id: Ia62437dfa81247b0b5994d554cf279c3d540e4e7
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Brad Fitzpatrick 9259377a7f wgengine/router: don't assume Linux was built with IP_MULTIPLE_TABLES
Updates #3351
Updates #391

Change-Id: I7e66b686e05f3c970846513679cc62556ebe322a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Brad Fitzpatrick 0350cf0438 wgengine{,/router}: annotate some more errors
Updates #3351

Change-Id: I8b4f957d2051b3e29401bb449dbadbdada3a7c46
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Josh Bleecher Snyder 758c37b83d net/netns: thread logf into control functions
So that darwin can log there without panicking during tests.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
3 years ago
Josh Bleecher Snyder 85184a58ed wgengine/wgcfg: recover from mismatched PublicKey/Endpoints
In rare circumstances (tailscale/corp#3016), the PublicKey
and Endpoints can diverge.

This by itself doesn't cause any harm, but our early exit
in response did, because it prevented us from recovering from it.

Remove the early exit.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
3 years ago
Brad Fitzpatrick 8ec44d0d5f wgengine/magicsock: remove some log spam
Fixes tailscale/corp#3070

Change-Id: Ie50031800ec8669e0596ad6d59d1e329a5c88516
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Brad Fitzpatrick 61d0435ed9 wgengine/monitor: reduce Windows log spam
Fixes #3345

Change-Id: Icde9c92f88f98bb3b030d39b0424a7d389bceb88
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Brad Fitzpatrick d24ed3f68e wgengine/router: add debug knob to resort to Linux "ip" command usage
Tailscale 1.18 uses netlink instead of the "ip" command to program the
Linux kernel.

The old way was kept primarily for tests, but this also adds a
TS_DEBUG_USE_IP_COMMAND environment knob to force the old way
temporarily for debugging anybody who might have problems with the
new way in 1.18.

Updates #391

Change-Id: I0236fbfda6c9c05dcb3554fcc27ec0c86456efd9
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Josh Bleecher Snyder b3d6704aa3 wgengine/magicsock: fix data race on endpoint.discoKey
endpoint.discoKey is protected by endpoint.mu.
endpoint.sendDiscoMessage was reading it without holding the lock.
This showed up in a CI failure and is readily reproducible locally.

The fix is in two parts.

First, for Conn.enqueueCallMeMaybe, eliminate the one-line helper method endpoint.sendDiscoMessage; call Conn.sendDiscoMessage directly.
This makes it more natural to read endpoint.discoKey in a context
in which endpoint.mu is already held.

Second, for endpoint.sendDiscoPing, explicitly pass the disco key
as an argument. Again, this makes it easier to read endpoint.discoKey
in a context in which endpoint.mu is already held.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
3 years ago
Brad Fitzpatrick cf06f9df37 net/tstun, wgengine: add packet-level and drop metrics
Primarily tstun work, but some MagicDNS stuff spread into wgengine.

No wireguard reconfig metrics (yet).

Updates #3307

Change-Id: Ide768848d7b7d0591e558f118b553013d1ec94ad
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Brad Fitzpatrick 7901289578 wgengine/magicsock: add a stress test
And add a peerMap validate method that checks its internal invariants.

Updates tailscale/corp#3016

Change-Id: I23708e68ed44d81986d9e2be82029d4555547592
Co-authored-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
3 years ago
Josh Bleecher Snyder 5a60781919 wgengine/magicsock: increase TestDiscokeyChange connection timeout
I believe that this should eliminate the flakiness.
If GitHub CI manages to be even slower that can be believed
(and I can believe a lot at this point),
then we should roll this back and make some more invasive changes.

Updates #654
Fixes #3247 (I hope)

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
3 years ago
Josh Bleecher Snyder 773af7292b wgengine/magicsock: simplify peerMap.upsertEndpoint
We can do the "maybe delete" check unilaterally:
In the case of an insert, both oldDiscoKey
and ep.discoKey will be the zero value.

And since we don't use pi again, we can skip
giving it a name, which makes scoping clearer.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
3 years ago
Josh Bleecher Snyder 9da22dac3d wgengine/magicsock: fix bug in peerMap.upsertEndpoint
Found by inspection by David Crawshaw while
investigating tailscale/corp#3016.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
3 years ago
Josh Bleecher Snyder 16870cb754 wgengine/magicsock: fix typo in comment
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
3 years ago
David Anderson 41da7620af go.mod: update wireguard-go to pick up roaming toggle
wgengine/wgcfg: introduce wgcfg.NewDevice helper to disable roaming
at all call sites (one real plus several tests).

Fixes tailscale/corp#3016.

Signed-off-by: David Anderson <danderson@tailscale.com>
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
3 years ago
Brad Fitzpatrick 24ea365d48 netcheck, controlclient, magicsock: add more metrics
Updates #3307

Change-Id: Ibb33425764a75bde49230632f1b472f923551126
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Brad Fitzpatrick 57b039c51d util/clientmetrics: add new package to add metrics to the client
And annotate magicsock as a start.

And add localapi and debug handlers with the Prometheus-format
exporter.

Updates #3307

Change-Id: I47c5d535fe54424741df143d052760387248f8d3
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
David Anderson 0532eb30db all: replace tailcfg.DiscoKey with key.DiscoPublic.
Signed-off-by: David Anderson <danderson@tailscale.com>
3 years ago
Josh Bleecher Snyder c467ed0b62 wgengine/wgcfg: always close io.Pipe
In DeviceConfig, we did not close r after calling FromUAPI.
If FromUAPI returned early due to an error, then it might
not have read all the data that IpcGetOperation wanted to write.
As a result, IpcGetOperation could hang, as in #3220.

We were also closing the wrong end of the pipe after IpcSetOperation
in ReconfigDevice.

To ensure that we get all available information to diagnose
such a situation, include all errors anytime something goes wrong.

This should fix the immediate crashing problem in #3220.
We'll then need to figure out why IpcGetOperation was failing.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
3 years ago
Josh Bleecher Snyder 3fd5f4380f util/multierr: new package
github.com/go-multierror/multierror served us well.
But we need a few feature from it (implement Is),
and it's not worth maintaining a fork of such a small module.

Instead, I did a clean room implementation inspired by its API.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
3 years ago
David Anderson 7e6a1ef4f1 tailcfg: use key.NodePublic in wire protocol types.
Updates #3206.

Signed-off-by: David Anderson <danderson@tailscale.com>
3 years ago
David Anderson c17250cee2 ipn/ipnstate: use key.NodePublic instead of tailcfg.NodeKey.
Updates #3206

Signed-off-by: David Anderson <danderson@tailscale.com>
3 years ago
David Anderson c3d7115e63 wgengine: use key.NodePublic instead of tailcfg.NodeKey.
Updates #3206

Signed-off-by: David Anderson <danderson@tailscale.com>
3 years ago
David Anderson 72ace0acba wgengine/magicsock: use key.NodePublic instead of tailcfg.NodeKey.
Signed-off-by: David Anderson <danderson@tailscale.com>
3 years ago
David Anderson d6e7cec6a7 types/netmap: use key.NodePublic instead of tailcfg.NodeKey.
Update #3206

Signed-off-by: David Anderson <danderson@tailscale.com>
3 years ago
Brad Fitzpatrick 408b0923a6 wgengine/router: remove last non-test "ip" command usage on Linux
Updates #391

Change-Id: Ic2c3f8460b1e4b8d34b936a1725705fcc1effbae
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Brad Fitzpatrick ff1954cfd9 wgengine/router: use netlink for ip rules on Linux
Using temporary netlink fork in github.com/tailscale/netlink until we
get the necessary changes upstream in either vishvananda/netlink
or jsimonetti/rtnetlink.

Updates #391

Change-Id: I6e1de96cf0750ccba53dabff670aca0c56dffb7c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Brad Fitzpatrick 5dc5bd8d20 cmd/tailscaled, wgengine/netstack: always wire up netstack
Even if not in use. We plan to use it for more stuff later.

(not for iOS or macOS-GUIs yet; only tailscaled)

Change-Id: Idaef719d2a009be6a39f158fd8f57f8cca68e0ee
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
David Anderson 84c3a09a8d types/key: export constants for key size, not a method.
Signed-off-by: David Anderson <danderson@tailscale.com>
3 years ago
David Anderson 6422789ea0 disco: use key.NodePublic instead of tailcfg.NodeKey.
Updates #3206

Signed-off-by: David Anderson <danderson@tailscale.com>
3 years ago
David Anderson 418adae379 various: use NodePublic.AsNodeKey() instead of tailcfg.NodeKeyFromNodePublic()
Updates #3206

Signed-off-by: David Anderson <danderson@tailscale.com>
3 years ago
David Anderson eeb97fd89f various: remove remaining uses of key.NewPrivate.
Updates #3206

Signed-off-by: David Anderson <danderson@tailscale.com>
3 years ago
David Anderson ccd36cb5b1 wgengine: remove use of legacy key parsing helper.
Updates #3206

Signed-off-by: David Anderson <danderson@tailscale.com>
3 years ago
David Anderson ef241f782e wgengine/magicsock: remove uses of tailcfg.DiscoKey.
Updates #3206

Signed-off-by: David Anderson <danderson@tailscale.com>
3 years ago
David Anderson 55b6753c11 wgengine/magicsock: remove use of key.{Public,Private}.
Updates #3206

Signed-off-by: David Anderson <danderson@tailscale.com>
3 years ago
David Anderson c1d009b9e9 ipn/ipnstate: use key.NodePublic instead of the generic key.Public.
Updates #3206.

Signed-off-by: David Anderson <danderson@tailscale.com>
3 years ago
David Anderson 37c150aee1 derp: use new node key type.
Update #3206

Signed-off-by: David Anderson <danderson@tailscale.com>
3 years ago
Brad Fitzpatrick 19189d7018 wgengine/router: add a addrFamily type [linux]
In prep for more netlink-ification.

Change-Id: I7c34a04001988107dc2583597aa4f26ddb887e91
3 years ago
David Anderson e03fda7ae6 wgengine/magicsock: remove test uses of wgkey.
Updates #3206

Signed-off-by: David Anderson <danderson@tailscale.com>
3 years ago
Brad Fitzpatrick 7c40a5d440 wgengine/router: refactor in prep for Linux netlink-ification
Pull out the list of policy routing rules to a data structure
now shared between the add & delete paths, but to also be shared
by the netlink paths in a future change.

Updates #391

Change-Id: I119ab1c246f141d639006c808b61c585c3d67924
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Josh Bleecher Snyder 94fb42d4b2 all: use testingutil.MinAllocsPerRun
There are a few remaining uses of testing.AllocsPerRun:
Two in which we only log the number of allocations,
and one in which dynamically calculate the allocations
target based on a different AllocsPerRun run.

This also allows us to tighten the "no allocs"
test in wgengine/filter.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
3 years ago
Josh Bleecher Snyder 1df865a580 wgengine/magicsock: allow even fewer allocs per UDP receive
We improved things again for Go 1.18. Lock that in.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
3 years ago
Josh Bleecher Snyder c1d377078d wgengine/magicsock: use testingutil.MinAllocsPerRun
This speeds up and deflakes the test.

Fixes #2826 (again)

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
3 years ago
Brad Fitzpatrick aad46bd9ff wgengine/router: stop cleaning up old dev rules on Linux
Anybody using that one old, unreleased version of Tailscale from over
a year ago should've rebooted their machine by now to get various
non-Tailscale security updates. :)

Change-Id: If9e043cb008b20fcd6ddfd03756b3b23a9d7aeb5
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
David Anderson c9bf773312 wgengine/magicsock: replace use of wgkey with new node key type.
Signed-off-by: David Anderson <danderson@tailscale.com>
3 years ago