tailscale

Commit Graph

Author	SHA1	Message	Date
Maisem Ali	2f2f588c80	cmd/natc: use ListenPacket Now that tsnet supports it, use it. Updates tailscale/corp#20503 Signed-off-by: Maisem Ali <maisem@tailscale.com>	6 months ago
Maisem Ali	0b1a8586eb	cmd/natc: initial implementation of a NAT based connector This adds a new prototype `cmd/natc` which can be used to expose a services/domains to the tailnet. It requires the user to specify a set of IPv4 prefixes from the CGNAT range. It advertises these as normal subnet routes. It listens for DNS on the first IP of the first range provided to it. When it gets a DNS query it allocates an IP for that domain from the v4 range. Subsequent connections to the assigned IP are then tcp proxied to the domain. It is marked as a WIP prototype and requires the use of the `TAILSCALE_USE_WIP_CODE` env var. Updates tailscale/corp#20503 Signed-off-by: Maisem Ali <maisem@tailscale.com>	6 months ago
Jordan Whited	d21c00205d	cmd/stunstamp: implement service to measure DERP STUN RTT (#12241 ) stunstamp timestamping includes userspace and SO_TIMESTAMPING kernel timestamping where available. Measurements are written locally to a sqlite DB, exposed over an HTTP API, and written to prometheus via remote-write protocol. Updates tailscale/corp#20344 Signed-off-by: Jordan Whited <jordan@tailscale.com>	6 months ago
Maisem Ali	42cfbf427c	tsnet,wgengine/netstack: add ListenPacket and tests This adds a new ListenPacket function on tsnet.Server which acts mostly like `net.ListenPacket`. Unlike `Server.Listen`, this requires listening on a specific IP and does not automatically listen on both V4 and V6 addresses of the Server when the IP is unspecified. To test this, it also adds UDP support to tsdial.Dialer.UserDial and plumbs it through the localapi. Then an associated test to make sure the UDP functionality works from both sides. Updates #12182 Signed-off-by: Maisem Ali <maisem@tailscale.com>	6 months ago
Irbe Krumina	c2a4719e9e	cmd/tailscale/cli: allow 'tailscale up' to succeed if --stateful-filtering is not explicitly set on linux (#12312 ) This fixes an issue where, on containerized environments an upgrade 1.66.3 -> 1.66.4 failed with default containerboot configuration. This was because containerboot by default runs 'tailscale up' that requires all previously set flags to be explicitly provided on subsequent runs and we explicitly set --stateful-filtering to true on 1.66.3, removed that settingon 1.66.4. Updates tailscale/tailscale#12307 Signed-off-by: Irbe Krumina <irbe@tailscale.com> Co-authored-by: Andrew Lytvynov <awly@tailscale.com>	6 months ago
ChandonPierre	0a5bd63d32	ipn/store/kubestore, cmd/containerboot: allow overriding client api server URL via ENV (#12115 ) Updates tailscale/tailscale#11397 Signed-off-by: Chandon Pierre <cpierre@coreweave.com>	6 months ago
Anton Tolchanov	32120932a5	cmd/tailscale/cli: print node signature in `tailscale lock status` - Add current node signature to `ipnstate.NetworkLockStatus`; - Print current node signature in a human-friendly format as part of `tailscale lock status`. Examples: ``` $ tailscale lock status Tailnet lock is ENABLED. This node is accessible under tailnet lock. Node signature: SigKind: direct Pubkey: [OTB3a] KeyID: tlpub:44a0e23cd53a4b8acc02f6732813d8f5ba8b35d02d48bf94c9f1724ebe31c943 WrappingPubkey: tlpub:44a0e23cd53a4b8acc02f6732813d8f5ba8b35d02d48bf94c9f1724ebe31c943 This node's tailnet-lock key: tlpub:44a0e23cd53a4b8acc02f6732813d8f5ba8b35d02d48bf94c9f1724ebe31c943 Trusted signing keys: tlpub:44a0e23cd53a4b8acc02f6732813d8f5ba8b35d02d48bf94c9f1724ebe31c943 1 (self) tlpub:6fa21d242a202b290de85926ba3893a6861888679a73bc3a43f49539d67c9764 1 (pre-auth key kq3NzejWoS11KTM59) ``` For a node created via a signed auth key: ``` This node is accessible under tailnet lock. Node signature: SigKind: rotation Pubkey: [e3nAO] Nested: SigKind: credential KeyID: tlpub:6fa21d242a202b290de85926ba3893a6861888679a73bc3a43f49539d67c9764 WrappingPubkey: tlpub:3623b0412cab0029cb1918806435709b5947ae03554050f20caf66629f21220a ``` For a node that rotated its key a few times: ``` This node is accessible under tailnet lock. Node signature: SigKind: rotation Pubkey: [DOzL4] Nested: SigKind: rotation Pubkey: [S/9yU] Nested: SigKind: rotation Pubkey: [9E9v4] Nested: SigKind: direct Pubkey: [3QHTJ] KeyID: tlpub:44a0e23cd53a4b8acc02f6732813d8f5ba8b35d02d48bf94c9f1724ebe31c943 WrappingPubkey: tlpub:2faa280025d3aba0884615f710d8c50590b052c01a004c2b4c2c9434702ae9d0 ``` Updates tailscale/corp#19764 Signed-off-by: Anton Tolchanov <anton@tailscale.com>	6 months ago
Brad Fitzpatrick	1ea100e2e5	cmd/tailscaled, ipn/conffile: support ec2 user-data config file Updates #1412 Updates #1866 Change-Id: I4d08fb233b80c2078b3b28ffc18559baabb4a081 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	6 months ago
signed-long	5ad0dad15e	go generate directives reorder for 'make kube-generate-all' (#12210 ) Fixes #11980 Signed-off-by: Michael Long <michaelongdev@gmail.com>	6 months ago
Irbe Krumina	d0d33f257f	cmd/k8s-operator: add a note pointing at ProxyClass (#12246 ) Updates tailscale/tailscale#12242 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	6 months ago
Maisem Ali	9a64c06a20	all: do not depend on the testing package Discovered while looking for something else. Updates tailscale/corp#18935 Signed-off-by: Maisem Ali <maisem@tailscale.com>	6 months ago
Brad Fitzpatrick	3c9be07214	cmd/derper: support TXT-mediated unpublished bootstrap DNS rollouts Updates tailscale/coral#127 Change-Id: I2712c50630d0d1272c30305fa5a1899a19ffacef Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	6 months ago
Irbe Krumina	72f0f53ed0	cmd/k8s-operator: fix typo (#12217 ) Fixes#cleanup Signed-off-by: Irbe Krumina <irbe@tailscale.com>	6 months ago
James Tucker	9351eec3e1	net/netcheck: remove hairpin probes Palo Alto reported interpreting hairpin probes as LAND attacks, and the firewalls may be responding to this by shutting down otherwise in use NAT sessions prematurely. We don't currently make use of the outcome of the hairpin probes, and they contribute to other user confusion with e.g. the AirPort Extreme hairpin session workaround. We decided in response to remove the whole probe feature as a result. Updates #188 Updates tailscale/corp#19106 Updates tailscale/corp#19116 Signed-off-by: James Tucker <james@tailscale.com>	6 months ago
Andrew Lytvynov	c9179bc261	various: disable stateful filtering by default (#12197 ) After some analysis, stateful filtering is only necessary in tailnets that use `autogroup:danger-all` in `src` in ACLs. And in those cases users explicitly specify that hosts outside of the tailnet should be able to reach their nodes. To fix local DNS breakage in containers, we disable stateful filtering by default. Updates #12108 Signed-off-by: Andrew Lytvynov <awly@tailscale.com>	6 months ago
Brad Fitzpatrick	964282d34f	ipn,wgengine: remove vestigial Prefs.AllowSingleHosts It was requested by the first customer 4-5 years ago and only used for a brief moment of time. We later added netmap visibility trimming which removes the need for this. It's been hidden by the CLI for quite some time and never documented anywhere else. This keeps the CLI flag, though, out of caution. It just returns an error if it's set to anything but true (its default). Fixes #12058 Change-Id: I7514ba572e7b82519b04ed603ff9f3bdbaecfda7 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	6 months ago
Jordan Whited	adb7a86559	cmd/stunc: support ipv6 address targets (#12166 ) Updates #cleanup Signed-off-by: Jordan Whited <jordan@tailscale.com>	6 months ago
James Tucker	8d1249550a	net/netcheck,wgengine/magicsock: add potential workaround for Palo Alto DIPP misbehavior Palo Alto firewalls have a typically hard NAT, but also have a mode called Persistent DIPP that is supposed to provide consistent port mapping suitable for STUN resolution of public ports. Persistent DIPP works initially on most Palo Alto firewalls, but some models/software versions have a bug which this works around. The bug symptom presents as follows: - STUN sessions resolve a consistent public IP:port to start with - Much later netchecks report the same IP:Port for a subset of sessions, most often the users active DERP, and/or the port related to sustained traffic. - The broader set of DERPs in a full netcheck will now consistently observe a new IP:Port. - After this point of observation, new inbound connections will only succeed to the new IP:Port observed, and existing/old sessions will only work to the old binding. In this patch we now advertise the lowest latency global endpoint discovered as we always have, but in addition any global endpoints that are observed more than once in a single netcheck report. This should provide viable endpoints for potential connection establishment across a NAT with this behavior. Updates tailscale/corp#19106 Signed-off-by: James Tucker <james@tailscale.com>	6 months ago
Andrea Gottardo	e5f67f90a2	xcode: allow ICMP ping relay on macOS + iOS platforms (#12048 ) Fixes tailscale/tailscale#10393 Fixes tailscale/corp#15412 Fixes tailscale/corp#19808 On Apple platforms, exit nodes and subnet routers have been unable to relay pings from Tailscale devices to non-Tailscale devices due to sandbox restrictions imposed on our network extensions by Apple. The sandbox prevented the code in netstack.go from spawning the `ping` process which we were using. Replace that exec call with logic to send an ICMP echo request directly, which appears to work in userspace, and not trigger a sandbox violation in the syslog. Signed-off-by: Andrea Gottardo <andrea@gottardo.me>	6 months ago
Irbe Krumina	76c30e014d	cmd/containerboot: warn when an ingress proxy with an IPv4 tailnet address is being created for an IPv6 backend(s) (#12159 ) Updates tailscale/tailscale#12156 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	6 months ago
Maisem Ali	486a423716	tsnet: split user facing and backend logging This adds a new `UserLogf` field to the `Server` struct. When set this any logs generated by Server are logged using `UserLogf` and all spammy backend logs are logged to `Logf`. If it `UserLogf` is unset, we default to `log.Printf` and if `Logf` is unset we discard all the spammy logs. Fixes #12094 Signed-off-by: Maisem Ali <maisem@tailscale.com>	7 months ago
Irbe Krumina	d86d1e7601	cmd/k8s-operator,cmd/containerboot,ipn,k8s-operator: turn off stateful filter for egress proxies. (#12075 ) Turn off stateful filtering for egress proxies to allow cluster traffic to be forwarded to tailnet. Allow configuring stateful filter via tailscaled config file. Deprecate EXPERIMENTAL_TS_CONFIGFILE_PATH env var and introduce a new TS_EXPERIMENTAL_VERSIONED_CONFIG env var that can be used to provide containerboot a directory that should contain one or more tailscaled config files named cap-<tailscaled-cap-version>.hujson. Containerboot will pick the one with the newest capability version that is not newer than its current capability version. Proxies with this change will not work with older Tailscale Kubernetes operator versions - users must ensure that the deployed operator is at the same version or newer (up to 4 version skew) than the proxies. Updates tailscale/tailscale#12061 Signed-off-by: Irbe Krumina <irbe@tailscale.com> Co-authored-by: Maisem Ali <maisem@tailscale.com>	7 months ago
Maisem Ali	21abb7f402	cmd/tailscale: add missing set flags for linux We were missing `snat-subnet-routes`, `stateful-filtering` and `netfilter-mode`. Add those to set too. Fixes #12061 Signed-off-by: Maisem Ali <maisem@tailscale.com>	7 months ago
Irbe Krumina	b5dbf155b1	cmd/k8s-operator: default nameserver image to tailscale/k8s-nameserver:unstable (#11991 ) We are now publishing nameserver images to tailscale/k8s-nameserver, so we can start defaulting the images if users haven't set them explicitly, same as we already do with proxy images. The nameserver images are currently only published for unstable track, so we have to use the static 'unstable' tag. Once we start publishing to stable, we can make the operator default to its own tag (because then we'll know that for each operator tag X there is also a nameserver tag X as we always cut all images for a given tag. Updates tailscale/tailscale#10499 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	7 months ago
Brad Fitzpatrick	e968b0ecd7	cmd/tailscale,controlclient,ipnlocal: fix 'up', deflake tests more The CLI's "up" is kinda chaotic and LocalBackend.Start is kinda chaotic and they both need to be redone/deleted (respectively), but this fixes some buggy behavior meanwhile. We were previously calling StartLoginInteractive (to start the controlclient's RegisterRequest) redundantly in some cases, causing test flakes depending on timing and up's weird state machine. We only need to call StartLoginInteractive in the client if Start itself doesn't. But Start doesn't tell us that. So cheat a bit and a put the information about whether there's a current NodeKey in the ipn.Status. It used to be accessible over LocalAPI via GetPrefs as a private key but we removed that for security. But a bool is fine. So then only call StartLoginInteractive if that bool is false and don't do it in the WatchIPNBus loop. Fixes #12028 Updates #12042 Change-Id: I0923c3f704a9d6afd825a858eb9a63ca7c1df294 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	7 months ago
Brad Fitzpatrick	727c0d6cfd	ipn/ipnserver: close a small race in ipnserver, ~simplify code There was a small window in ipnserver after we assigned a LocalBackend to the ipnserver's atomic but before we Start'ed it where our initalization Start could conflict with API calls from the LocalAPI. Simplify that a bit and lay out the rules in the docs. Updates #12028 Change-Id: Ic5f5e4861e26340599184e20e308e709edec68b1 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	7 months ago
Andrew Lytvynov	471731771c	ipn/ipnlocal: set default NoStatefulFiltering in ipn.NewPrefs (#12031 ) This way the default gets populated on first start, when no existing state exists to migrate. Also fix `ipn.PrefsFromBytes` to preserve empty fields, rather than layering `NewPrefs` values on top. Updates https://github.com/tailscale/corp/issues/19623 Signed-off-by: Andrew Lytvynov <awly@tailscale.com>	7 months ago
Paul Scott	78fa698fe6	cmd/tailscale/cli/ffcomplete: remove fullstop from ShortHelp Updates #cleanup Signed-off-by: Paul Scott <paul@tailscale.com>	7 months ago
Andrew Lytvynov	c28f5767bf	various: implement stateful firewalling on Linux (#12025 ) Updates https://github.com/tailscale/corp/issues/19623 Change-Id: I7980e1fb736e234e66fa000d488066466c96ec85 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Co-authored-by: Andrew Dunham <andrew@du.nham.ca>	7 months ago
Brad Fitzpatrick	f3d2fd22ef	cmd/tailscale/cli: don't start WatchIPNBus until after up's initial Start The CLI "up" command is a historical mess, both on the CLI side and the LocalBackend side. We're getting closer to cleaning it up, but in the meantime it was again implicated in flaky tests. In this case, the background goroutine running WatchIPNBus was very occasionally running enough to get to its StartLoginInteractive call before the original goroutine did its Start call. That meant integration tests were very rarely but sometimes logging in with the default control plane URL out on the internet (controlplane.tailscale.com) instead of the localhost control server for tests. This also might've affected new Headscale etc users on initial "up". Fixes #11960 Fixes #11962 Change-Id: I36f8817b69267a99271b5ee78cb7dbf0fcc0bd34 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	7 months ago
Nick Khyl	caa3d7594f	ipn/ipnlocal, net/tsdial: plumb routes into tsdial and use them in UserDial We'd like to use tsdial.Dialer.UserDial instead of SystemDial for DNS over TCP. This is primarily necessary to properly dial internal DNS servers accessible over Tailscale and subnet routes. However, to avoid issues when switching between Wi-Fi and cellular, we need to ensure that we don't retain connections to any external addresses on the old interface. Therefore, we need to determine which dialer to use internally based on the configured routes. This plumbs routes and localRoutes from router.Config to tsdial.Dialer, and updates UserDial to use either the peer dialer or the system dialer, depending on the network address and the configured routes. Updates tailscale/corp#18725 Fixes #4529 Signed-off-by: Nick Khyl <nickk@tailscale.com>	7 months ago
Brad Fitzpatrick	c3c18027c6	all: make more tests pass/skip in airplane mode Updates tailscale/corp#19786 Change-Id: Iedc6730fe91c627b556bff5325bdbaf7bf79d8e6 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	7 months ago
Irbe Krumina	406293682c	cmd/k8s-operator: cleanup runReconciler signature (#11993 ) Updates#cleanup Signed-off-by: Irbe Krumina <irbe@tailscale.com>	7 months ago
Brad Fitzpatrick	15fc6cd966	derp/derphttp: fix netcheck HTTPS probes The netcheck client, when no UDP is available, probes distance using HTTPS. Several problems: * It probes using /derp/latency-check. * But cmd/derper serves the handler at /derp/probe * Despite the difference, it work by accident until `c8f4dfc8c0` which made netcheck's probe require a 2xx status code. * in tests, we only use derphttp.Handler, so the cmd/derper-installed mux routes aren't preesnt, so there's no probe. That breaks tests in airplane mode. netcheck.Client then reports "unexpected HTTP status 426" (Upgrade Required) This makes derp handle both /derp/probe and /derp/latency-check equivalently, and in both cmd/derper and derphttp.Handler standalone modes. I notice this when wgengine/magicsock TestActiveDiscovery was failing in airplane mode (no wifi). It still doesn't pass, but it gets further. Fixes #11989 Change-Id: I45213d4bd137e0f29aac8bd4a9ac92091065113f	7 months ago
Brad Fitzpatrick	1fe0983f2d	cmd/derper,tstest/nettest: skip network-needing test in airplane mode Not buying wifi on a short flight is a good way to find tests that require network. Whoops. Updates #cleanup Change-Id: Ibe678e9c755d27269ad7206413ffe9971f07d298 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	7 months ago
Irbe Krumina	cd633a7252	cmd/k8s-operator/deploy,k8s-operator: document that metrics are unstable (#11979 ) Updates#11292 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	7 months ago
Irbe Krumina	19b31ac9a6	cmd/{k8s-operator,k8s-nameserver},k8s-operator: update nameserver config with records for ingress/egress proxies (#11019 ) cmd/k8s-operator: optionally update dnsrecords Configmap with DNS records for proxies. This commit adds functionality to automatically populate DNS records for the in-cluster ts.net nameserver to allow cluster workloads to resolve MagicDNS names associated with operator's proxies. The records are created as follows: * For tailscale Ingress proxies there will be a record mapping the MagicDNS name of the Ingress device and each proxy Pod's IP address. * For cluster egress proxies, configured via tailscale.com/tailnet-fqdn annotation, there will be a record for each proxy Pod, mapping the MagicDNS name of the exposed tailnet workload to the proxy Pod's IP. No records will be created for any other proxy types. Records will only be created if users have configured the operator to deploy an in-cluster ts.net nameserver by applying tailscale.com/v1alpha1.DNSConfig. It is user's responsibility to add the ts.net nameserver as a stub nameserver for ts.net DNS names. https://kubernetes.io/docs/tasks/administer-cluster/dns-custom-nameservers/#configuration-of-stub-domain-and-upstream-nameserver-using-coredns https://cloud.google.com/kubernetes-engine/docs/how-to/kube-dns#upstream_nameservers See also https://github.com/tailscale/tailscale/pull/11017 Updates tailscale/tailscale#10499 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	7 months ago
Paul Scott	4c08410011	cmd/tailscale/cli: set localClient.UseSocketOnly during flag parsing This configures localClient correctly during flag parsing, so that the --socket option is effective when generating tab-completion results. For example, the following would not connect to the system Tailscale for tab-completion results: tailscale --socket=/tmp/tailscaled.socket switch <TAB> Updates #3793 Signed-off-by: Paul Scott <paul@tailscale.com>	7 months ago
Paul Scott	ba34943133	cmd/tailscale/cli/ffcomplete: omit and clean completion results Updates #3793 Signed-off-by: Paul Scott <paul@tailscale.com>	7 months ago
Gabe Gorelick	de85610be0	cmd/k8s-operator/deploy/chart: allow users to configure additional labels for the operator's Pod via Helm chart values. cmd/k8s-operator/deploy/chart: allow users to configure additional labels for the operator's Pod via Helm chart values. Fixes #11947 Signed-off-by: Gabe Gorelick <gabe@hightouch.io>	7 months ago
Irbe Krumina	44aa809cb0	cmd/{k8s-nameserver,k8s-operator},k8s-operator: add a kube nameserver, make operator deploy it (#11919 ) * cmd/k8s-nameserver,k8s-operator: add a nameserver that can resolve ts.net DNS names in cluster. Adds a simple nameserver that can respond to A record queries for ts.net DNS names. It can respond to queries from in-memory records, populated from a ConfigMap mounted at /config. It dynamically updates its records as the ConfigMap contents changes. It will respond with NXDOMAIN to queries for any other record types (AAAA to be implemented in the future). It can respond to queries over UDP or TCP. It runs a miekg/dns DNS server with a single registered handler for ts.net domain names. Queries for other domain names will be refused. The intended use of this is: 1) to allow non-tailnet cluster workloads to talk to HTTPS tailnet services exposed via Tailscale operator egress over HTTPS 2) to allow non-tailnet cluster workloads to talk to workloads in the same cluster that have been exposed to tailnet over their MagicDNS names but on their cluster IPs. DNSConfig CRD can be used to configure the operator to deploy kube nameserver (./cmd/k8s-nameserver) to cluster. Updates tailscale/tailscale#10499 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	7 months ago
Irbe Krumina	7d9c3f9897	cmd/k8s-operator/deploy/manifests: check if IPv6 module is loaded before using it (#11867 ) Before attempting to enable IPv6 forwarding in the proxy init container check if the relevant module is found, else the container crashes on hosts that don't have it. Updates#11860 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	7 months ago
Andrew Lytvynov	ce5c80d0fe	clientupdate: exec systemctl instead of using dbus to restart (#11923 ) Shell out to "systemctl", which lets us drop an extra dependency. Updates https://github.com/tailscale/corp/issues/18935 Signed-off-by: Andrew Lytvynov <awly@tailscale.com>	7 months ago
Irbe Krumina	1452faf510	cmd/containerboot,kube,ipn/store/kubestore: allow interactive login on kube, check Secret create perms, allow empty state Secret (#11326 ) cmd/containerboot,kube,ipn/store/kubestore: allow interactive login and empty state Secrets, check perms * Allow users to pre-create empty state Secrets * Add a fake internal kube client, test functionality that has dependencies on kube client operations. * Fix an issue where interactive login was not allowed in an edge case where state Secret does not exist * Make the CheckSecretPermissions method report whether we have permissions to create/patch a Secret if it's determined that these operations will be needed Updates tailscale/tailscale#11170 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	7 months ago
Brad Fitzpatrick	b9adbe2002	net/{interfaces,netmon}, all: merge net/interfaces package into net/netmon In prep for most of the package funcs in net/interfaces to become methods in a long-lived netmon.Monitor that can cache things. (Many of the funcs are very heavy to call regularly, whereas the long-lived netmon.Monitor can subscribe to things from the OS and remember answers to questions it's asked regularly later) Updates tailscale/corp#10910 Updates tailscale/corp#18960 Updates #7967 Updates #3299 Change-Id: Ie4e8dedb70136af2d611b990b865a822cd1797e5 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	7 months ago
Brad Fitzpatrick	6b95219e3a	net/netmon, add: add netmon.State type alias of interfaces.State ... in prep for merging the net/interfaces package into net/netmon. This is a no-op change that updates a bunch of the API signatures ahead of a future change to actually move things (and remove the type alias) Updates tailscale/corp#10910 Updates tailscale/corp#18960 Updates #7967 Updates #3299 Change-Id: I477613388f09389214db0d77ccf24a65bff2199c Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	7 months ago
Irbe Krumina	45f0721530	cmd/containerboot: wait on tailscaled process only (#11897 ) Modifies containerboot to wait on tailscaled process only, not on any child process of containerboot. Waiting on any subprocess was racing with Go's exec.Cmd.Run, used to run iptables commands and that starts its own subprocesses and waits on them. Containerboot itself does not run anything else except for tailscaled, so there shouldn't be a need to wait on anything else. Updates tailscale/tailscale#11593 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	7 months ago
Brad Fitzpatrick	3672f29a4e	net/netns, net/dns/resolver, etc: make netmon required in most places The goal is to move more network state accessors to netmon.Monitor where they can be cheaper/cached. But first (this change and others) we need to make sure the one netmon.Monitor is plumbed everywhere. Some notable bits: * tsdial.NewDialer is added, taking a now-required netmon * because a tsdial.Dialer always has a netmon, anything taking both a Dialer and a NetMon is now redundant; take only the Dialer and get the NetMon from that if/when needed. * netmon.NewStatic is added, primarily for tests Updates tailscale/corp#10910 Updates tailscale/corp#18960 Updates #7967 Updates #3299 Change-Id: I877f9cb87618c4eb037cee098241d18da9c01691 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	7 months ago
Brad Fitzpatrick	7a62dddeac	net/netcheck, wgengine/magicsock: make netmon.Monitor required This has been a TODO for ages. Time to do it. The goal is to move more network state accessors to netmon.Monitor where they can be cheaper/cached. Updates tailscale/corp#10910 Updates tailscale/corp#18960 Updates #7967 Updates #3299 Change-Id: I60fc6508cd2d8d079260bda371fc08b6318bcaf1 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	7 months ago
Brad Fitzpatrick	745931415c	health, all: remove health.Global, finish plumbing health.Tracker Updates #11874 Updates #4136 Change-Id: I414470f71d90be9889d44c3afd53956d9f26cd61 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	7 months ago

1 2 3 4 5 ...

1805 Commits (2f2f588c800c310502ed1f9fea1bc110de5d87db)