tailscale

Commit Graph

Author	SHA1	Message	Date
Maisem Ali	bb31fd7d1c	net/tstun: add inital support for NAT v4 This adds support in tstun to utitilize the SelfNodeV4MasqAddrForThisPeer and perform the necessary modifications to the packet as it passes through tstun. Currently this only handles ICMP, UDP and TCP traffic. Subnet routers and Exit Nodes are also unsupported. Updates tailscale/corp#8020 Co-authored-by: Melanie Warrick <warrick@tailscale.com> Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Maisem Ali	535fad16f8	net/tstun: rename filterIn/filterOut methods to be more descriptive Updates tailscale/corp#8020 Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Tom DNetto	2ca6dd1f1d	wgengine: start logging DISCO frames to pcap stream Signed-off-by: Tom DNetto <tom@tailscale.com>	2 years ago
Tom DNetto	99b9d7a621	all: implement pcap streaming for datapath debugging Updates: tailscale/corp#8470 Signed-off-by: Tom DNetto <tom@tailscale.com>	2 years ago
Will Norris	71029cea2d	all: update copyright and license headers This updates all source files to use a new standard header for copyright and license declaration. Notably, copyright no longer includes a date, and we now use the standard SPDX-License-Identifier header. This commit was done almost entirely mechanically with perl, and then some minimal manual fixes. Updates #6865 Signed-off-by: Will Norris <will@tailscale.com>	2 years ago
andig	5f96d6211a	Remove redundant type declaration Signed-off-by: andig <cpuidle@gmx.de>	2 years ago
Brad Fitzpatrick	6d85a94767	net/{packet,tstun}: fix typo in test helper docs Change-Id: Ifc1684fe77c7d2585e049e0dfd7340910c47a67a Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	c1a2e2c380	net/{packet,tstun},wgengine/filter: fix unknown IP protocol handling `01b90df2fa` added SCTP support before (with explicit parsing for ports) and `69de3bf7bf` tried to add support for arbitrary IP protocols (as long as the ACL permited a port of "", since we might not know how to find ports from an arbitrary IP protocol, if it even has such a concept). But apparently that latter commit wasn't tested end-to-end enough. It had a lot of tests, but the tests made assumptions about layering that either weren't true, or regressed since 1.20. Notably, it didn't remove the (Filter).pre bidirectional filter that dropped all "unknown" protocol packets both leaving and entering, even if there were explicit protocol matches allowing them in. Also, don't map all unknown protocols to 0. Keep their IP protocol number parsed so it's matchable by later layers. Only reject illegal things. Fixes #6423 Updates #2162 Updates #2163 Change-Id: I9659b3ece86f4db51d644f9b34df78821758842c Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
andig	14e8afe444	go.mod, etc: bump gvisor Fixes #6554 Change-Id: Ia04ae37a47b67fa57091c9bfe1d45a1842589aa8 Signed-off-by: andig <cpuidle@gmx.de>	2 years ago
Joe Tsai	d9df023e6f	net/connstats: enforce maximum number of connections (#6760 ) The Tailscale logging service has a hard limit on the maximum log message size that can be accepted. We want to ensure that netlog messages never exceed this limit otherwise a client cannot transmit logs. Move the goroutine for periodically dumping netlog messages from wgengine/netlog to net/connstats. This allows net/connstats to manage when it dumps messages, either based on time or by size. Updates tailscale/corp#8427 Signed-off-by: Joe Tsai <joetsai@digital-static.net>	2 years ago
Jordan Whited	55b24009f7	net/tstun: don't return early from a partial tun.Read() (#6745 ) Fixes #6730 Signed-off-by: Jordan Whited <jordan@tailscale.com>	2 years ago
Jordan Whited	ea5ee6f87c	all: update golang.zx2c4.com/wireguard to github.com/tailscale/wireguard-go (#6692 ) This is temporary while we work to upstream performance work in https://github.com/WireGuard/wireguard-go/pull/64. A replace directive is less ideal as it breaks dependent code without duplication of the directive. Signed-off-by: Jordan Whited <jordan@tailscale.com>	2 years ago
Maisem Ali	eb1adf629f	net/tstun: reuse buffered packet from pool We would call parsedPacketPool.Get() for all packets received in Read/Write. This was wasteful and not necessary, fetch a single *packet.Parsed for all packets. Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Jordan Whited	76389d8baf	net/tstun, wgengine/magicsock: enable vectorized I/O on Linux (#6663 ) This commit updates the wireguard-go dependency and implements the necessary changes to the tun.Device and conn.Bind implementations to support passing vectors of packets in tailscaled. This significantly improves throughput performance on Linux. Updates #414 Signed-off-by: Jordan Whited <jordan@tailscale.com> Signed-off-by: James Tucker <james@tailscale.com> Co-authored-by: James Tucker <james@tailscale.com>	2 years ago
Joe Tsai	2e5d08ec4f	net/connstats: invert network logging data flow (#6272 ) Previously, tstun.Wrapper and magicsock.Conn managed their own statistics data structure and relied on an external call to Extract to extract (and reset) the statistics. This makes it difficult to ensure a maximum size on the statistics as the caller has no introspection into whether the number of unique connections is getting too large. Invert the control flow such that a connstats.Statistics is registered with tstun.Wrapper and magicsock.Conn. Methods on non-nil connstats.Statistics are called for every packet. This allows the implementation of connstats.Statistics (in the future) to better control when it needs to flush to ensure bounds on maximum sizes. The value registered into tstun.Wrapper and magicsock.Conn could be an interface, but that has two performance detriments: 1. Method calls on interface values are more expensive since they must go through a virtual method dispatch. 2. The implementation would need a sync.Mutex to protect the statistics value instead of using an atomic.Pointer. Given that methods on constats.Statistics are called for every packet, we want reduce the CPU cost on this hot path. Signed-off-by: Joe Tsai <joetsai@digital-static.net>	2 years ago
Andrew Dunham	c2d7940ec0	cmd/tailscaled, net/tstun: add build tags to omit BIRD and TAP Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I7a39f4eeeb583b73ecffaf4c5f086a38e3a53e2e	2 years ago
Brad Fitzpatrick	da8def8e13	all: remove old +build tags The //go:build syntax was introduced in Go 1.17: https://go.dev/doc/go1.17#build-lines gofmt has kept the +build and go:build lines in sync since then, but enough time has passed. Time to remove them. Done with: perl -i -npe 's,^// \+build.*\n,,' $(git grep -l -F '+build') Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	f4ff26f577	types/pad32: delete package Use Go 1.19's new 64-bit alignment ~hidden feature instead. Fixes #5356 Change-Id: Ifcbcb115875a7da01df3bc29e9e7feadce5bc956 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Joe Tsai	c21a3c4733	types/netlogtype: new package for network logging types (#6092 ) The netlog.Message type is useful to depend on from other packages, but doing so would transitively cause gvisor and other large packages to be linked in. Avoid this problem by moving all network logging types to a single package. We also update staticcheck to take in: `003d277bcf` Signed-off-by: Joe Tsai <joetsai@digital-static.net>	2 years ago
Joe Tsai	1b4e4cc1e8	wgengine/netlog: new package for traffic flow logging (#5864 ) The Logger type managers a logtail.Logger for extracting statistics from a tstun.Wrapper. So long as Shutdown is called, it ensures that logtail and statistic gathering resources are properly cleared up. Signed-off-by: Joe Tsai <joetsai@digital-static.net>	2 years ago
Joe Tsai	84e8f25c21	net/tstun: rename statististics method (#5852 ) Rename StatisticsEnable as SetStatisticsEnabled to be consistent with other similarly named methods. Rename StatisticsExtract as ExtractStatistics to follow the convention where methods start with a verb. It was originally named with Statistics as a prefix so that statistics related methods would sort well in godoc, but that property no longer holds. Signed-off-by: Joe Tsai <joetsai@digital-static.net>	2 years ago
Joe Tsai	24ebf161e8	net/tstun: instrument Wrapper with statistics gathering (#5847 ) If Wrapper.StatisticsEnable is enabled, then per-connection counters are maintained. If enabled, Wrapper.StatisticsExtract must be periodically called otherwise there is unbounded memory growth. Signed-off-by: Joe Tsai <joetsai@digital-static.net>	2 years ago
Josh Soref	d4811f11a0	all: fix spelling mistakes Signed-off-by: Josh Soref <2119212+jsoref@users.noreply.github.com>	2 years ago
Brad Fitzpatrick	74674b110d	envknob: support changing envknobs post-init Updates #5114 Change-Id: Ia423fc7486e1b3f3180a26308278be0086fae49b Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Maisem Ali	a9f6cd41fd	all: use syncs.AtomicValue Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Maisem Ali	9bb5a038e5	all: use atomic.Pointer Also add some missing docs. Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Brad Fitzpatrick	a12aad6b47	all: convert more code to use net/netip directly perl -i -npe 's,netaddr.IPPrefixFrom,netip.PrefixFrom,' $(git grep -l -F netaddr.) perl -i -npe 's,netaddr.IPPortFrom,netip.AddrPortFrom,' $(git grep -l -F netaddr. ) perl -i -npe 's,netaddr.IPPrefix,netip.Prefix,g' $(git grep -l -F netaddr. ) perl -i -npe 's,netaddr.IPPort,netip.AddrPort,g' $(git grep -l -F netaddr. ) perl -i -npe 's,netaddr.IP\b,netip.Addr,g' $(git grep -l -F netaddr. ) perl -i -npe 's,netaddr.IPv6Raw\b,netip.AddrFrom16,g' $(git grep -l -F netaddr. ) goimports -w . Then delete some stuff from the net/netaddr shim package which is no longer neeed. Updates #5162 Change-Id: Ia7a86893fe21c7e3ee1ec823e8aba288d4566cd8 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	6a396731eb	all: use various net/netip parse funcs directly Mechanical change with perl+goimports. Changed {Must,}Parse{IP,IPPrefix,IPPort} to their netip variants, then goimports -d . Finally, removed the net/netaddr wrappers, to prevent future use. Updates #5162 Change-Id: I59c0e38b5fbca5a935d701645789cddf3d7863ad Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	7eaf5e509f	net/netaddr: start migrating to net/netip via new netaddr adapter package Updates #5162 Change-Id: Id7bdec303b25471f69d542f8ce43805328d56c12 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Maisem Ali	9514ed33d2	go.mod: bump gvisor.dev/gvisor Pick up https://github.com/google/gvisor/pull/7787 Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Brad Fitzpatrick	0d52674a84	net/tstun: diagnose /dev/net/tun fd leak, give better failure message Updates #5029 Change-Id: Ibee5e0c9076fe764eb5d856d5ef8b09f4d0e2921 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	1336fb740b	wgengine/netstack: make netstack MTU be 1280 also Updates #3878 Change-Id: I1850085b32c8a40d85607b4ad433622c97d96a8d Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Mihai Parparita	86069874c9	net/tstun, wgengine: use correct type for counter metrics We were marking them as gauges, but they are only ever incremented, thus counter is more appropriate. Signed-off-by: Mihai Parparita <mihai@tailscale.com>	3 years ago
James Tucker	f9e86e64b7	*: use WireGuard where logged, printed or named Signed-off-by: James Tucker <james@tailscale.com>	3 years ago
James Tucker	ae483d3446	wgengine, net/packet, cmd/tailscale: add ICMP echo Updates tailscale/corp#754 Signed-off-by: James Tucker <james@tailscale.com>	3 years ago
Tom DNetto	7f45734663	assorted: documentation and readability fixes This were intended to be pushed to #4408, but in my excitement I forgot to git push :/ better late than never. Signed-off-by: Tom DNetto <tom@tailscale.com>	3 years ago
Tom DNetto	9e77660931	net/tstun,wgengine/{.,netstack}: handle UDP magicDNS traffic in netstack This change wires netstack with a hook for traffic coming from the host into the tun, allowing interception and handling of traffic to quad-100. With this hook wired, magicDNS queries over UDP are now handled within netstack. The existing logic in wgengine to handle magicDNS remains for now, but its hook operates after the netstack hook so the netstack implementation takes precedence. This is done in case we need to support platforms with netstack longer than expected. Signed-off-by: Tom DNetto <tom@tailscale.com>	3 years ago
Tom DNetto	dc71d3559f	net/tstun,wgengine: split PreFilterOut into multiple hooks A subsequent commit implements handling of magicDNS traffic via netstack. Implementing this requires a hook for traffic originating from the host and hitting the tun, so we make another hook to support this. Signed-off-by: Tom DNetto <tom@tailscale.com>	3 years ago
James Tucker	445c04c938	wgengine: inject packetbuffers rather than bytes (#4220 ) Plumb the outbound injection path to allow passing netstack PacketBuffers down to the tun Read, where they are decref'd to enable buffer re-use. This removes one packet alloc & copy, and reduces GC pressure by pooling outbound injected packets. Fixes #2741 Signed-off-by: James Tucker <james@tailscale.com>	3 years ago
Josh Bleecher Snyder	0868329936	all: use any instead of interface{} My favorite part of generics. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Dmytro Shynkevych	d9a7205be5	net/tstun: set link speed to SPEED_UNKNOWN Fixes #3933. Signed-off-by: Dmytro Shynkevych <dm.shynk@gmail.com>	3 years ago
Brad Fitzpatrick	8267ea0f80	net/tstun: remove TODO that's done This TODO was both added and fixed in `506c727e3`. As I recall, I wasn't originally going to do it because it seemed annoying, so I wrote the TODO, but then I felt bad about it and just did it, but forgot to remove the TODO. Change-Id: I8f3514809ad69b447c62bfeb0a703678c1aec9a3 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	1af26222b6	go.mod: bump netstack, switch to upstream netstack Now that Go 1.17 has module graph pruning (https://go.dev/doc/go1.17#go-command), we should be able to use upstream netstack without breaking our private repo's build that then depends on the tailscale.com Go module. This is that experiment. Updates #1518 (the original bug to break out netstack to own module) Updates #2642 (this updates netstack, but doesn't remove workaround) Change-Id: I27a252c74a517053462e5250db09f379de8ac8ff Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	41fd4eab5c	envknob: add new package for all the strconv.ParseBool(os.Getenv(..)) A new package can also later record/report which knobs are checked and set. It also makes the code cleaner & easier to grep for env knobs. Change-Id: Id8a123ab7539f1fadbd27e0cbeac79c2e4f09751 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	506c727e30	ipnlocal, net/{dns,tsaddr,tstun}, wgengine: support MagicDNS on IPv6 Fixes #3660 RELNOTE=MagicDNS now works over IPv6 when CGNAT IPv4 is disabled. Change-Id: I001e983df5feeb65289abe5012dedd177b841b45 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Josh Bleecher Snyder	73beaaf360	net/tstun: rate limit "self disco out packet" logging When this happens, it is incredibly noisy in the logs. It accounts for about a third of all remaining "unexpected" log lines from a recent investigation. It's not clear that we know how to fix this, we have a functioning workaround, and we now have a (cheap and efficient) metric for this that we can use for measurements. So reduce the logging to approximately once per minute. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Brad Fitzpatrick	cf06f9df37	net/tstun, wgengine: add packet-level and drop metrics Primarily tstun work, but some MagicDNS stuff spread into wgengine. No wireguard reconfig metrics (yet). Updates #3307 Change-Id: Ide768848d7b7d0591e558f118b553013d1ec94ad Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
David Anderson	0532eb30db	all: replace tailcfg.DiscoKey with key.DiscoPublic. Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
Josh Bleecher Snyder	94fb42d4b2	all: use testingutil.MinAllocsPerRun There are a few remaining uses of testing.AllocsPerRun: Two in which we only log the number of allocations, and one in which dynamically calculate the allocations target based on a different AllocsPerRun run. This also allows us to tighten the "no allocs" test in wgengine/filter. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Brad Fitzpatrick	9b101bd6af	net/tstun: don't compile the code New constructor on js/wasm Updates #3157 Change-Id: I81603edf3e69e6f1517b0074eef6b648f2981c50 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Aaron Klotz	1991a1ac6a	net/tstun: update tun_windows for wintun 0.14 API revisions, update wireguard-go dependency to 82d2aa87aa623cb5143a41c3345da4fb875ad85d Signed-off-by: Aaron Klotz <aaron@tailscale.com>	3 years ago
Brad Fitzpatrick	080381c79f	net/tstun: block looped disco traffic, take 17 It was in the wrong filter direction before, per CPU profiles we now have. Updates #1526 (maybe fixes? time will tell) Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	dabeda21e0	net/tstun: block looped disco traffic Updates #1526 (maybe fixes? time will tell) Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Emmanuel T Odeke	0daa32943e	all: add (*testing.B).ReportAllocs() to every benchmark This ensures that we can properly track and catch allocation slippages that could otherwise have been missed. Fixes #2748	3 years ago
Maisem Ali	1f006025c2	net/tstun: fix build on arm Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Matt Layher	8ab44b339e	net/tstun: use unix.Ifreq type for Linux TAP interface configuration Signed-off-by: Matt Layher <mdlayher@gmail.com>	3 years ago
Brad Fitzpatrick	833200da6f	net/tstun: don't exec uname -r on Linux in TUN failure diagnostics Fixes https://twitter.com/zekjur/status/1425557520513486848 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	e804ab29fd	net/tstun: move TUN failure diagnostics to OS-specific files Mostly so the Linux one can use Linux-specific stuff in package syscall and not use os/exec for uname for portability. But also it helps deps a tiny bit on iOS. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Josh Bleecher Snyder	a5da4ed981	all: gofmt with Go 1.17 This adds "//go:build" lines and tidies up existing "// +build" lines. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Brad Fitzpatrick	a729070252	net/tstun: add start of Linux TAP support, with DHCP+ARP server Still very much a prototype (hard-coded IPs, etc) but should be non-invasive enough to submit at this point and iterate from here. Updates #2589 Co-Author: David Crawshaw <crawshaw@tailscale.com> Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Josh Bleecher Snyder	c2202cc27c	net/tstun: use mono.Time There's a call to Now once per packet. Move to mono.Now. Though the current implementation provides high precision, we document it to be coarse, to preserve the ability to switch to a coarse monotonic time later. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Josh Bleecher Snyder	1034b17bc7	net/tstun: buffer outbound channel The handoff between tstun.Wrap's Read and poll methods is one of the per-packet hotspots. It shows up in pprof. Making outbound buffered increases throughput. It is hard to measure exactly how much, because the numbers are highly variable, but I'd estimate it at about 1%, using the best observed max throughput across three runs. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Josh Bleecher Snyder	965dccd4fc	net/tstun: buffer outbound channel The handoff between tstun.Wrap's Read and poll methods is one of the per-packet hotspots. It shows up in pprof. Making outbound buffered increases throughput. It is hard to measure exactly how much, because the numbers are highly variable, but I'd estimate it at about 1%, using the best observed max throughput across three runs. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Josh Bleecher Snyder	0ad92b89a6	net/tstun: fix data races To remove some multi-case selects, we intentionally allowed sends on closed channels (`cc23049cd2`). However, we also introduced concurrent sends and closes, which is a data race. This commit fixes the data race. The mutexes here are uncontended, and thus very cheap. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Josh Bleecher Snyder	c35a832de6	net/tstun: add inner loop to poll This avoids re-enqueuing to t.bufferConsumed, which makes the code a bit clearer. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Josh Bleecher Snyder	a4cc7b6d54	net/tstun: simplify code Calculate whether the packet is injected directly, rather than via an else branch. Unify the exit paths. It is easier here than duplicating them. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Josh Bleecher Snyder	cc23049cd2	net/tstun: remove multi-case selects from hot code Every TUN Read went through several multi-case selects. We know from past experience with wireguard-go that these are slow and cause scheduler churn. The selects served two purposes: they separated errors from data and gracefully handled shutdown. The first is fairly easy to replace by sending errors and data over a single channel. The second, less so. We considered a few approaches: Intricate webs of channels, global condition variables. They all get ugly fast. Instead, let's embrace the ugly and handle shutdown ungracefully. It's horrible, but the horror is simple and localized. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
David Anderson	df8a5d09c3	net/tstun: add a debug envvar to override tun MTU. Signed-off-by: David Anderson <dave@natulte.net>	4 years ago
Brad Fitzpatrick	a321c24667	go.mod: update netaddr Involves minor IPSetBuilder.Set API change. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Josh Bleecher Snyder	1ece91cede	go.mod: upgrade wireguard-windows, de-fork wireguard-go Pull in the latest version of wireguard-windows. Switch to upstream wireguard-go. This requires reverting all of our import paths. Unfortunately, this has to happen at the same time. The wireguard-go change is very low risk, as that commit matches our fork almost exactly. (The only changes are import paths, CI files, and a go.mod entry.) So if there are issues as a result of this commit, the first place to look is wireguard-windows changes. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Josh Bleecher Snyder	25df067dd0	all: adapt to opaque netaddr types This commit is a mishmash of automated edits using gofmt: gofmt -r 'netaddr.IPPort{IP: a, Port: b} -> netaddr.IPPortFrom(a, b)' -w . gofmt -r 'netaddr.IPPrefix{IP: a, Port: b} -> netaddr.IPPrefixFrom(a, b)' -w . gofmt -r 'a.IP.Is4 -> a.IP().Is4' -w . gofmt -r 'a.IP.As16 -> a.IP().As16' -w . gofmt -r 'a.IP.Is6 -> a.IP().Is6' -w . gofmt -r 'a.IP.As4 -> a.IP().As4' -w . gofmt -r 'a.IP.String -> a.IP().String' -w . And regexps: \w(.)\.Port = (.) -> $1 = $1.WithPort($2) \w(.)\.IP = (.) -> $1 = $1.WithIP($2) And lots of manual fixups. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Brad Fitzpatrick	7f2eb1d87a	net/tstun: fix TUN log spam when ACLs drop a packet Whenever we dropped a packet due to ACLs, wireguard-go was logging: Failed to write packet to TUN device: packet dropped by filter Instead, just lie to wireguard-go and pretend everything is okay. Fixes #1229 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Josh Bleecher Snyder	42c8b9ad53	net/tstun: remove unnecessary break statement Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	4 years ago
Josh Bleecher Snyder	99705aa6b7	net/tstun: split TUN events channel into up/down and MTU We had a long-standing bug in which our TUN events channel was being received from simultaneously in two places. The first is wireguard-go. At wgengine/userspace.go:366, we pass e.tundev to wireguard-go, which starts a goroutine (RoutineTUNEventReader) that receives from that channel and uses events to adjust the MTU and bring the device up/down. At wgengine/userspace.go:374, we launch a goroutine that receives from e.tundev, logs MTU changes, and triggers state updates when up/down changes occur. Events were getting delivered haphazardly between the two of them. We don't really want wireguard-go to receive the up/down events; we control the state of the device explicitly by calling device.Up. And the userspace.go loop MTU logging duplicates logging that wireguard-go does when it received MTU updates. So this change splits the single TUN events channel into up/down and other (aka MTU), and sends them to the parties that ought to receive them. I'm actually a bit surprised that this hasn't caused more visible trouble. If a down event went to wireguard-go but the subsequent up event went to userspace.go, we could end up with the wireguard-go device disappearing. I believe that this may also (somewhat accidentally) be a fix for #1790. Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	4 years ago
Avery Pennarun	a92b9647c5	wgengine/bench: speed test for channels, sockets, and wireguard-go. This tries to generate traffic at a rate that will saturate the receiver, without overdoing it, even in the event of packet loss. It's unrealistically more aggressive than TCP (which will back off quickly in case of packet loss) but less silly than a blind test that just generates packets as fast as it can (which can cause all the CPU to be absorbed by the transmitter, giving an incorrect impression of how much capacity the total system has). Initial indications are that a syscall about every 10 packets (TCP bulk delivery) is roughly the same speed as sending every packet through a channel. A syscall per packet is about 5x-10x slower than that. The whole tailscale wireguard-go + magicsock + packet filter combination is about 4x slower again, which is better than I thought we'd do, but probably has room for improvement. Note that in "full" tailscale, there is also a tundev read/write for every packet, effectively doubling the syscall overhead per packet. Given these numbers, it seems like read/write syscalls are only 25-40% of the total CPU time used in tailscale proper, so we do have significant non-syscall optimization work to do too. Sample output: $ GOMAXPROCS=2 go test -bench . -benchtime 5s ./cmd/tailbench goos: linux goarch: amd64 pkg: tailscale.com/cmd/tailbench cpu: Intel(R) Core(TM) i7-4785T CPU @ 2.20GHz BenchmarkTrivialNoAlloc/32-2 56340248 93.85 ns/op 340.98 MB/s 0 %lost 0 B/op 0 allocs/op BenchmarkTrivialNoAlloc/124-2 57527490 99.27 ns/op 1249.10 MB/s 0 %lost 0 B/op 0 allocs/op BenchmarkTrivialNoAlloc/1024-2 52537773 111.3 ns/op 9200.39 MB/s 0 %lost 0 B/op 0 allocs/op BenchmarkTrivial/32-2 41878063 135.6 ns/op 236.04 MB/s 0 %lost 0 B/op 0 allocs/op BenchmarkTrivial/124-2 41270439 138.4 ns/op 896.02 MB/s 0 %lost 0 B/op 0 allocs/op BenchmarkTrivial/1024-2 36337252 154.3 ns/op 6635.30 MB/s 0 %lost 0 B/op 0 allocs/op BenchmarkBlockingChannel/32-2 12171654 494.3 ns/op 64.74 MB/s 0 %lost 1791 B/op 0 allocs/op BenchmarkBlockingChannel/124-2 12149956 507.8 ns/op 244.17 MB/s 0 %lost 1792 B/op 1 allocs/op BenchmarkBlockingChannel/1024-2 11034754 528.8 ns/op 1936.42 MB/s 0 %lost 1792 B/op 1 allocs/op BenchmarkNonlockingChannel/32-2 8960622 2195 ns/op 14.58 MB/s 8.825 %lost 1792 B/op 1 allocs/op BenchmarkNonlockingChannel/124-2 3014614 2224 ns/op 55.75 MB/s 11.18 %lost 1792 B/op 1 allocs/op BenchmarkNonlockingChannel/1024-2 3234915 1688 ns/op 606.53 MB/s 3.765 %lost 1792 B/op 1 allocs/op BenchmarkDoubleChannel/32-2 8457559 764.1 ns/op 41.88 MB/s 5.945 %lost 1792 B/op 1 allocs/op BenchmarkDoubleChannel/124-2 5497726 1030 ns/op 120.38 MB/s 12.14 %lost 1792 B/op 1 allocs/op BenchmarkDoubleChannel/1024-2 7985656 1360 ns/op 752.86 MB/s 13.57 %lost 1792 B/op 1 allocs/op BenchmarkUDP/32-2 1652134 3695 ns/op 8.66 MB/s 0 %lost 176 B/op 3 allocs/op BenchmarkUDP/124-2 1621024 3765 ns/op 32.94 MB/s 0 %lost 176 B/op 3 allocs/op BenchmarkUDP/1024-2 1553750 3825 ns/op 267.72 MB/s 0 %lost 176 B/op 3 allocs/op BenchmarkTCP/32-2 11056336 503.2 ns/op 63.60 MB/s 0 %lost 0 B/op 0 allocs/op BenchmarkTCP/124-2 11074869 533.7 ns/op 232.32 MB/s 0 %lost 0 B/op 0 allocs/op BenchmarkTCP/1024-2 8934968 671.4 ns/op 1525.20 MB/s 0 %lost 0 B/op 0 allocs/op BenchmarkWireGuardTest/32-2 1403702 4547 ns/op 7.04 MB/s 14.37 %lost 467 B/op 3 allocs/op BenchmarkWireGuardTest/124-2 780645 7927 ns/op 15.64 MB/s 1.537 %lost 420 B/op 3 allocs/op BenchmarkWireGuardTest/1024-2 512671 11791 ns/op 86.85 MB/s 0.5206 %lost 411 B/op 3 allocs/op PASS ok tailscale.com/wgengine/bench 195.724s Updates #414. Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	4 years ago
Brad Fitzpatrick	939861773d	net/tstun: accept peerapi connections through the filter Fixes tailscale/corp#1545 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
David Anderson	bc4381447f	net/tstun: return the real interface name at device creation. This is usually the same as the requested interface, but on some unixes can vary based on device number allocation, and on Windows it's the GUID instead of the pretty name, since everything relating to configuration wants the GUID. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
Brad Fitzpatrick	41e4e02e57	net/{packet,tstun}: send peerapi port in TSMP pongs For discovery when an explicit hostname/IP is known. We'll still also send it via control for finding peers by a list. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
David Anderson	25e0bb0a4e	net/tstun: rename wrap_windows.go to tun_windows.go. The code has nothing to do with wrapping, it's windows-specific driver initialization code. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	22d53fe784	net/tstun: document exported function. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	016de16b2e	net/tstun: rename TUN to Wrapper. The tstun packagen contains both constructors for generic tun Devices, and a wrapper that provides additional functionality. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	82ab7972f4	net/tstun: rename NewFakeTUN to NewFake. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	588b70f468	net/tstun: merge in wgengine/tstun. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
David Anderson	018200aeba	net/tstun: rename from net/tun. We depend on wireguard-go/tun, identical leaf packages can be confusing in code. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago

1 2 3

134 Commits (2dd71e64ac11675e22e17fd4c2b2afd1d99009e6)