tailscale

Commit Graph

Author	SHA1	Message	Date
Brad Fitzpatrick	4f648e6fcc	cmd/tailscaled: disable netns earlier in userspace-networking mode The earlier `382b349c54` was too late, as engine creation itself needed to listen on things. Fixes #2827 Updates #2822 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	382b349c54	cmd/tailscaled: disable netns in userspace-networking mode Updates #2827 Updates #2822 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Dave Anderson	980acc38ba	types/key: add a special key with custom serialization for control private keys (#2792 ) * Revert "Revert "types/key: add MachinePrivate and MachinePublic."" This reverts commit `61c3b98a24`. Signed-off-by: David Anderson <danderson@tailscale.com> * types/key: add ControlPrivate, with custom serialization. ControlPrivate is just a MachinePrivate that serializes differently in JSON, to be compatible with how the Tailscale control plane historically serialized its private key. Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	61c3b98a24	Revert "types/key: add MachinePrivate and MachinePublic." Broke the tailscale control plane due to surprise different serialization. This reverts commit `4fdb88efe1`.	3 years ago
David Anderson	4fdb88efe1	types/key: add MachinePrivate and MachinePublic. Plumb throughout the codebase as a replacement for the mixed use of tailcfg.MachineKey and wgkey.Private/Public. Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
Brad Fitzpatrick	99a1c74a6a	metrics: optimize CurrentFDs to not allocate on Linux It was 50% of our allocs on one of our servers. (!!) Updates #2784 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Maisem Ali	0842e2f45b	ipn/store: add ability to store data as k8s secrets. Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Brad Fitzpatrick	21cb0b361f	safesocket: add connect retry loop to wait for tailscaled Updates #2708 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
David Anderson	97693f2e42	wgengine/magicsock: delete legacy AddrSet endpoints. Instead of using the legacy codepath, teach discoEndpoint to handle peers that have a home DERP, but no disco key. We can still communicate with them, but only over DERP. Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
Maisem Ali	fd4838dc57	wgengine/userspace: add support to automatically enable/disable the tailscale protocol in BIRD, when the node is a primary subnet router as determined by control. Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Brad Fitzpatrick	4aab083cae	cmd/tailscaled: add debug flag to print interfaces just once It previously only had a polling monitor mode. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	47045265b9	hostinfo: add SetDeviceModel setter, move remaining code from controlclient Updates tailscale/corp#1959 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Maisem Ali	9f62cc665e	tailscaled: try migrating old state on synology devices Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Brad Fitzpatrick	57b794c338	ipn/localapi: move cert fetching code to localapi, cache, add cert subcommand Updates #1235 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Matt Layher	8ab44b339e	net/tstun: use unix.Ifreq type for Linux TAP interface configuration Signed-off-by: Matt Layher <mdlayher@gmail.com>	3 years ago
Josh Bleecher Snyder	d2aa144dcc	syncs: bump known good version to include Go 1.17 Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Denton Gentry	3e7ff5ff98	cmd/tailscaled: enable hybrid netstack mode for FreeBSD. Allows FreeBSD to function as an exit node in the same way that Windows and Tailscaled-on-MacOS do. RELNOTE=FreeBSD can now function as an exit node. Fixes https://github.com/tailscale/tailscale/issues/2498 Signed-off-by: Denton Gentry <dgentry@tailscale.com>	3 years ago
Josh Bleecher Snyder	a4e19f2233	version: remove rsc.io/goversion dependency rsc.io/goversion is really expensive. Running version.ReadExe on tailscaled on darwin allocates 47k objects, almost 11mb. All we want is the module info. For that, all we need to do is scan through the binary looking for the magic start/end strings and then grab the bytes in between them. We can do that easily and quickly with nothing but a 64k buffer. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
David Crawshaw	360223fccb	types/dnstype: introduce new package for Resolver So the type can be used in net/dns without introducing a tailcfg dependency. For #2596 Signed-off-by: David Crawshaw <crawshaw@tailscale.com>	3 years ago
Josh Bleecher Snyder	eee6b85b9b	cmd/tailscaled: don't require root for --cleanup Without this, the integration tests fail locally for me: --- FAIL: TestCollectPanic (7.61s) integration.go:74: built [tailscale.com/cmd/tailscaled tailscale.com/cmd/tailscale] in 1.59s integration_test.go:102: initial run: tailscaled requires root; use sudo tailscaled (or use --tun=userspace-networking) integration_test.go:108: cleanup failed: exit status 1: "tailscaled requires root; use sudo tailscaled (or use --tun=userspace-networking)\n" stuntest.go:64: STUN server shutdown FAIL FAIL tailscale.com/tstest/integration 9.678s FAIL Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Josh Bleecher Snyder	a5da4ed981	all: gofmt with Go 1.17 This adds "//go:build" lines and tidies up existing "// +build" lines. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Brad Fitzpatrick	a729070252	net/tstun: add start of Linux TAP support, with DHCP+ARP server Still very much a prototype (hard-coded IPs, etc) but should be non-invasive enough to submit at this point and iterate from here. Updates #2589 Co-Author: David Crawshaw <crawshaw@tailscale.com> Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	fd7b738e5b	derp: use pad32 package for padding, reduce duplication Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	fdc081c291	net/portmapper: fix UPnP probing, work against all ports Prior to Tailscale 1.12 it detected UPnP on any port. Starting with Tailscale 1.11.x, it stopped detecting UPnP on all ports. Then start plumbing its discovered Location header port number to the code that was assuming port 5000. Fixes #2109 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	1db9032ff5	cmd/tailscaled: let portmap debug mode have an gateway/IP override knob For testing pfSense clients "behind" pfSense on Digital Ocean where the main interface still exists. This is easier for debugging. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	31ea073a73	cmd/tailscaled: add debug -portmap mode Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
David Crawshaw	3e039daf95	logpolicy: actually collect panics (Written with Josh) For #2544 Signed-off-by: David Crawshaw <crawshaw@tailscale.com>	3 years ago
Josh Bleecher Snyder	9da4181606	tstime/rate: new package This is a simplified rate limiter geared for exactly our needs: A fast, mono.Time-based rate limiter for use in tstun. It was generated by stripping down the x/time/rate rate limiter to just our needs and switching it to use mono.Time. It removes one time.Now call per packet. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Josh Bleecher Snyder	8a3d52e882	wgengine/magicsock: use mono.Time magicsock makes multiple calls to Now per packet. Move to mono.Now. Changing some of the calls to use package mono has a cascading effect, causing non-per-packet call sites to also switch. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Josh Bleecher Snyder	c2202cc27c	net/tstun: use mono.Time There's a call to Now once per packet. Move to mono.Now. Though the current implementation provides high precision, we document it to be coarse, to preserve the ability to switch to a coarse monotonic time later. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Joe Tsai	d145c594ad	util/deephash: improve cycle detection (#2470 ) The previous algorithm used a map of all visited pointers. The strength of this approach is that it quickly prunes any nodes that we have ever visited before. The detriment of the approach is that pruning is heavily dependent on the order that pointers were visited. This is especially relevant for hashing a map where map entries are visited in a non-deterministic manner, which would cause the map hash to be non-deterministic (which defeats the point of a hash). This new algorithm uses a stack of all visited pointers, similar to how github.com/google/go-cmp performs cycle detection. When we visit a pointer, we push it onto the stack, and when we leave a pointer, we pop it from the stack. Before visiting a pointer, we first check whether the pointer exists anywhere in the stack. If yes, then we prune the node. The detriment of this approach is that we may hash a node more often than before since we do not prune as aggressively. The set of visited pointers up until any node is only the path of nodes up to that node and not any other pointers that may have been visited elsewhere. This provides us deterministic hashing regardless of visit order. We can now delete hashMapFallback and associated complexity, which only exists because the previous approach was non-deterministic in the presence of cycles. This fixes a failure of the old algorithm where obviously different values are treated as equal because the pruning was too aggresive. See https://github.com/tailscale/tailscale/issues/2443#issuecomment-883653534 The new algorithm is slightly slower since it prunes less aggresively: name old time/op new time/op delta Hash-8 66.1µs ± 1% 68.8µs ± 1% +4.09% (p=0.000 n=19+19) HashMapAcyclic-8 63.0µs ± 1% 62.5µs ± 1% -0.76% (p=0.000 n=18+19) TailcfgNode-8 9.79µs ± 2% 9.88µs ± 1% +0.95% (p=0.000 n=19+17) HashArray-8 643ns ± 1% 653ns ± 1% +1.64% (p=0.000 n=19+19) However, a slower but more correct algorithm seems more favorable than a faster but incorrect algorithm. Signed-off-by: Joe Tsai <joetsai@digital-static.net>	3 years ago
Brad Fitzpatrick	ed8587f90d	wgengine/router: take a link monitor Prep for #1591 which will need to make Linux's router react to changes that the link monitor observes. The router package already depended on the monitor package transitively. Now it's explicit. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	7f7a81e5ae	cmd/tailscaled: add func to create ipnserver.Opts To unify the Windows service and non-service/non-Windows paths a bit. And provides a way to make Linux act like Windows for testing. (notably, for testing the fix to #2137) One perhaps visible change of this is that tailscaled.exe when run in cmd.exe/powershell (not as a Windows Service) no longer uses the "_daemon" autostart key. But in addition to being naturally what falls out of this change, that's also what Windows users would likely want, as otherwise the unattended mode user is ignored when the "_daemon" autostart key is specified. Notably, this would let people debug what their normally-run-as-a-service tailscaled is doing, even when they're running in Unattended Mode. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	ec4d721572	cmd/tailscaled: use state key constant from ipn package Rather than redefining it again. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
julianknodt	1bb6abc604	net/portmapper: add upnp port mapping Add in UPnP portmapping, using goupnp library in order to get the UPnP client and run the portmapping functions. This rips out anywhere where UPnP used to be in portmapping, and has a flow separate from PMP and PCP. RELNOTE=portmapper now supports UPnP mappings Fixes #682 Updates #2109 Signed-off-by: julianknodt <julianknodt@gmail.com>	3 years ago
Christine Dodrill	a19eea965f	tstest/integration/vms: use an in-process logcatcher (#2360 ) This adapts the existing in-process logcatcher from tstest/integration into a public type and uses it on the side of testcontrol. This also fixes a bug in the Alpine Linux OpenRC unit that makes every value in `/etc/default/tailscaled` exported into tailscaled's environment, a-la systemd [Service].EnviromentFile. Signed-off-by: Christine Dodrill <xe@tailscale.com>	3 years ago
Brad Fitzpatrick	700badd8f8	util/deephash: move internal/deephash to util/deephash No code changes. Just a minor package doc addition about lack of API stability.	3 years ago
Maisem Ali	ec52760a3d	wgengine/router_windows: support toggling local lan access when using exit nodes. Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
julianknodt	506c2fe8e2	cmd/tailscale: make netcheck use active DERP map, delete static copy After allowing for custom DERP maps, it's convenient to be able to see their latency in netcheck. This adds a query to the local tailscaled for the current DERPMap. Updates #1264 Signed-off-by: julianknodt <julianknodt@gmail.com>	3 years ago
Brad Fitzpatrick	3910c1edaf	net/socks5/tssocks: add new package, move SOCKS5 glue out of tailscaled Prep for #1970, #2264, #2268 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	82e15d3450	cmd/tailscaled: log SOCKS5 port when port 0 requested Part of #2158 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	10d7c2583c	net/dnsfallback: don't depend on derpmap.Prod Move derpmap.Prod to a static JSON file (go:generate'd) instead, to make its role explicit. And add a TODO about making dnsfallback use an update-over-time DERP map file instead of a baked-in one. Updates #1264 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
julianknodt	148602a89a	derp,cmd/derper: allow server to verify clients This adds a flag to the DERP server which specifies to verify clients through a local tailscaled. It is opt-in, so should not affect existing clients, and is mainly intended for users who want to run their own DERP servers. It assumes there is a local tailscaled running and will attempt to hit it for peer status information. Updates #1264 Signed-off-by: julianknodt <julianknodt@gmail.com>	3 years ago
Brad Fitzpatrick	38be964c2b	go.mod: update netstack Fixes a atomic alignment crash on 32-bit machines. Fixes #2129 Fixes tailscale/tailscale-synology#66 (same) Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Denton Gentry	ad288baaea	net/interfaces: use IPv4 link local if nothing better The only connectivity an AWS Lambda container has is an IPv4 link-local 169.254.x.x address using NAT: 12: vtarget_1@if11: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000 link/ether 7e:1c:3f:00:00:00 brd ff:ff:ff:ff:ff:ff link-netnsid 1 inet 169.254.79.1/32 scope global vtarget_1 valid_lft forever preferred_lft forever If there are no other IPv4/v6 addresses available, and we are running in AWS Lambda, allow IPv4 169.254.x.x addresses to be used. ---- Similarly, a Google Cloud Run container's only connectivity is a Unique Local Address fddf:3978:feb1:d745::c001/128. If there are no other addresses available then allow IPv6 Unique Local Addresses to be used. We actually did this in an earlier release, but now refactor it to work the same way as the IPv4 link-local support is being done. Signed-off-by: Denton Gentry <dgentry@tailscale.com>	4 years ago
Brad Fitzpatrick	03311bb0d6	hostinfo: add hostinfo package, move stuff out of controlclient And make it cheaper, so other parts of the code can check the environment. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
David Anderson	ac07ff43bf	cmd/tailscaled: start after NetworkManager and systemd-resolved. The dependency is a "soft" ordering dependency only, meaning that tailscaled will start after those services if those services were going to be run anyway, but doesn't force either of them to run. That's why it's safe to specify this dependency unconditionally, even for systems that don't run those services. Updates #2127. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
Christine Dodrill	8b2b899989	tstest/integration: test Alpine Linux (#2098 ) Alpine Linux[1] is a minimal Linux distribution built around musl libc. It boots very quickly, requires very little ram and is as close as you can get to an ideal citizen for testing Tailscale on musl. Alpine has a Tailscale package already[2], but this patch also makes it easier for us to provide an Alpine Linux package off of pkgs in the future. Alpine only offers Tailscale on the rolling-release edge branch. [1]: https://alpinelinux.org/ [2]: https://pkgs.alpinelinux.org/packages?name=tailscale&branch=edge Updates #1988 Signed-off-by: Christine Dodrill <xe@tailscale.com>	4 years ago
Maisem Ali	f944614c5c	cmd/tailscale/web: add support for QNAP Signed-off-by: Maisem Ali <maisem@tailscale.com>	4 years ago
Matt Layher	6956645ec8	go.mod: bump github.com/mdlayher/netlink to v1.4.1 Signed-off-by: Matt Layher <mdlayher@gmail.com>	4 years ago

1 2 3 4 5

239 Commits (2db877caa332c8968ee1b1eb08ef40a219ff3eec)