853 Commits (2adbfc920d39f4125558eee597568ca242a87eac)

Author	SHA1	Message	Date
Christine Dodrill	59e9b44f53	wgengine/filter: add a debug flag for filter logs (#2241) ... This uses a debug envvar to optionally disable filter logging rate limits by setting the environment variable TS_DEBUG_FILTER_RATE_LIMIT_LOGS to "all", and if it matches, the code will effectively disable the limits on the log rate by setting the limit to 1 millisecond. This should make sure that all filter logs will be captured. Signed-off-by: Christine Dodrill <xe@tailscale.com>	3 years ago
Brad Fitzpatrick	c45bfd4180	wgengine: make dnsIPsOverTailscale also consider DefaultResolvers ... Found during a failed experiment debugging something on Android. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	b92e2ebd24	wgengine/netstack: add Impl.DialContextUDP ... Unused so far, but eventually we'll want this for SOCKS5 UDP binds (we currently only do TCP with SOCKS5), and also for #2102 for forwarding MagicDNS upstream to Tailscale IPs over netstack. Updates #2102 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	45e64f2e1a	net/dns{,/resolver}: refactor DNS forwarder, send out of right link on macOS/iOS ... Fixes #2224 Fixes tailscale/corp#2045 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
David Crawshaw	4ce15505cb	wgengine: randomize client port if netmap says to ... For testing out #2187 Signed-off-by: David Crawshaw <crawshaw@tailscale.com>	3 years ago
David Crawshaw	5f8ffbe166	magicsock: add SetPreferredPort method ... Signed-off-by: David Crawshaw <crawshaw@tailscale.com>	3 years ago
Brad Fitzpatrick	80a4052593	cmd/tailscale, wgengine, tailcfg: don't assume LastSeen is present [mapver 20] ... Updates #2107 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Fletcher Nichol	a49df5cfda	wgenine/router: fix OpenBSD route creation ... The route creation for the `tun` device was augmented in #1469 but didn't account for adding IPv4 vs. IPv6 routes. There are 2 primary changes as a result: * Ensure that either `-inet` or `-inet6` was used in the [`route(8)`](https://man.openbsd.org/route) command * Use either the `localAddr4` or `localAddr6` for the gateway argument depending which destination network is being added The basis for the approach is based on the implementation from `router_userspace_bsd.go`, including the `inet()` helper function. Fixes #2048 References #1469 Signed-off-by: Fletcher Nichol <fnichol@nichol.ca>	3 years ago
Josh Bleecher Snyder	e92fd19484	wgengine/wglog: match upstream wireguard-go's code for wireguardGoString ... It is a bit faster. But more importantly, it matches upstream byte-for-byte, which ensures there'll be no corner cases in which we disagree. name old time/op new time/op delta SetPeers-8 3.58µs ± 0% 3.16µs ± 2% -11.74% (p=0.016 n=4+5) name old alloc/op new alloc/op delta SetPeers-8 2.53kB ± 0% 2.53kB ± 0% ~ (all equal) name old allocs/op new allocs/op delta SetPeers-8 99.0 ± 0% 99.0 ± 0% ~ (all equal) Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Brad Fitzpatrick	a321c24667	go.mod: update netaddr ... Involves minor IPSetBuilder.Set API change. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Josh Bleecher Snyder	ddf6c8c729	wgengine/magicsock: delete dead code ... Co-authored-by: Adrian Dewhurst <adrian@tailscale.com> Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Josh Bleecher Snyder	1ece91cede	go.mod: upgrade wireguard-windows, de-fork wireguard-go ... Pull in the latest version of wireguard-windows. Switch to upstream wireguard-go. This requires reverting all of our import paths. Unfortunately, this has to happen at the same time. The wireguard-go change is very low risk, as that commit matches our fork almost exactly. (The only changes are import paths, CI files, and a go.mod entry.) So if there are issues as a result of this commit, the first place to look is wireguard-windows changes. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Josh Bleecher Snyder	ceaaa23962	wgengine/wglog: cache strings ... We repeat many peers each time we call SetPeers. Instead of constructing strings for them from scratch every time, keep strings alive across iterations. name old time/op new time/op delta SetPeers-8 3.58µs ± 1% 2.41µs ± 1% -32.60% (p=0.000 n=9+10) name old alloc/op new alloc/op delta SetPeers-8 2.53kB ± 0% 1.30kB ± 0% -48.73% (p=0.000 n=10+10) name old allocs/op new allocs/op delta SetPeers-8 99.0 ± 0% 16.0 ± 0% -83.84% (p=0.000 n=10+10) We could reduce alloc/op 12% and allocs/op 23% if strs had type map[string]strCache instead of map[string]*strCache, but that wipes out the execution time impact. Given that re-use is the most common scenario, let's optimize for it. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Josh Bleecher Snyder	73adbb7a78	wgengine: pass an addressable value to deephash.UpdateHash ... This makes deephash more efficient. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Josh Bleecher Snyder	8bf2a38f29	go.mod: update wireguard-go, taking control over iOS memory usage from our fork ... Our wireguard-go fork used different values from upstream for package device's memory limits on iOS. This was the last blocker to removing our fork. These values are now vars rather than consts for iOS. c27ff9b9f6 Adjust them on startup to our preferred values. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Josh Bleecher Snyder	25df067dd0	all: adapt to opaque netaddr types ... This commit is a mishmash of automated edits using gofmt: gofmt -r 'netaddr.IPPort{IP: a, Port: b} -> netaddr.IPPortFrom(a, b)' -w . gofmt -r 'netaddr.IPPrefix{IP: a, Port: b} -> netaddr.IPPrefixFrom(a, b)' -w . gofmt -r 'a.IP.Is4 -> a.IP().Is4' -w . gofmt -r 'a.IP.As16 -> a.IP().As16' -w . gofmt -r 'a.IP.Is6 -> a.IP().Is6' -w . gofmt -r 'a.IP.As4 -> a.IP().As4' -w . gofmt -r 'a.IP.String -> a.IP().String' -w . And regexps: \w*(.*)\.Port = (.*) -> $1 = $1.WithPort($2) \w*(.*)\.IP = (.*) -> $1 = $1.WithIP($2) And lots of manual fixups. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Brad Fitzpatrick	5b52b64094	tsnet: add Tailscale-as-a-library package ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Josh Bleecher Snyder	ebcd7ab890	wgengine: remove wireguard-go DeviceOptions ... We no longer need them. This also removes the 32 bytes of prefix junk before endpoints. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Josh Bleecher Snyder	aacb2107ae	all: add extra information to serialized endpoints ... magicsock.Conn.ParseEndpoint requires a peer's public key, disco key, and legacy ip/ports in order to do its job. We currently accomplish that by: * adding the public key in our wireguard-go fork * encoding the disco key as magic hostname * using a bespoke comma-separated encoding It's a bit messy. Instead, switch to something simpler: use a json-encoded struct containing exactly the information we need, in the form we use it. Our wireguard-go fork still adds the public key to the address when it passes it to ParseEndpoint, but now the code compensating for that is just a couple of simple, well-commented lines. Once this commit is in, we can remove that part of the fork and remove the compensating code. Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	3 years ago
Josh Bleecher Snyder	98cae48e70	wgengine/wglog: optimize wireguardGoString ... The new code is ugly, but much faster and leaner. name old time/op new time/op delta SetPeers-8 7.81µs ± 1% 3.59µs ± 1% -54.04% (p=0.000 n=9+10) name old alloc/op new alloc/op delta SetPeers-8 7.68kB ± 0% 2.53kB ± 0% -67.08% (p=0.000 n=10+10) name old allocs/op new allocs/op delta SetPeers-8 237 ± 0% 99 ± 0% -58.23% (p=0.000 n=10+10) Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Josh Bleecher Snyder	9356912053	wgengine/wglog: add BenchmarkSetPeer ... Because it showed up on hello profiles. Cycle through some moderate-sized sets of peers. This should cover the "small tweaks to netmap" and the "up/down cycle" cases. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Brad Fitzpatrick	36a26e6a71	internal/deephash: rename from deepprint ... Yes, it printed, but that was an implementation detail for hashing. And coming optimization will make it print even less. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Josh Bleecher Snyder	773fcfd007	Revert "wgengine/bench: skip flaky test" ... This reverts commit d707e2f7e5. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Josh Bleecher Snyder	68911f6778	wgengine/bench: ignore "engine closing" errors ... On benchmark completion, we shut down the wgengine. If we happen to poll for status during shutdown, we get an "engine closing" error. It doesn't hurt anything; ignore it. Fixes tailscale/corp#1776 Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Brad Fitzpatrick	d707e2f7e5	wgengine/bench: skip flaky test ... Updates tailscale/corp#1776 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Josh Bleecher Snyder	8d2a90529e	wgengine/bench: hold lock in TrafficGen.GotPacket while calling first packet callback ... Without any synchronization here, the "first packet" callback can be delayed indefinitely, while other work continues. Since the callback starts the benchmark timer, this could skew results. Worse, if the benchmark manages to complete before the benchmark timer begins, it'll cause a data race with the benchmark shutdown performed by package testing. That is what is reported in #1881. This is a bit unfortunate, in that it means that users of TrafficGen have to be careful to keep this callback speedy and lightweight and to avoid deadlocks. Fixes #1881 Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Josh Bleecher Snyder	a72fb7ac0b	wgengine/bench: handle multiple Engine status callbacks ... It is possible to get multiple status callbacks from an Engine. We need to wait for at least one from each Engine. Without limiting to one per Engine, wait.Wait can exit early or can panic due to a negative counter. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Josh Bleecher Snyder	6618e82ba2	wgengine/bench: close Engines on benchmark completion ... This reduces the speed with which these benchmarks exhaust their supply fds. Not to zero unfortunately, but it's still helpful when doing long runs. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Josh Bleecher Snyder	ddd85b9d91	wgengine/magicsock: rename discoEndpoint.wgEndpointHostPort to wgEndpoint ... Fields rename only. Part of the general effort to make our code agnostic about endpoint formatting. It's just a name, but it will soon be a misleading one; be more generic. Do this as a separate commit because it generates a lot of whitespace changes. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Josh Bleecher Snyder	e0bd3cc70c	wgengine/magicsock: use netaddr.MustParseIPPrefix ... Delete our bespoke helper. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Josh Bleecher Snyder	bc68e22c5b	all: s/CreateEndpoint/ParseEndpoint/ in docs ... Upstream wireguard-go renamed the interface method from CreateEndpoint to ParseEndpoint. I missed some comments. Fix them. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Josh Bleecher Snyder	9bce1b7fc1	wgengine/wgcfg: make device test endpoint-format-agnostic ... By using conn.NewDefaultBind, this test requires that our endpoints be comprehensible to wireguard-go. Instead, use a no-op bind that treats endpoints as opaque strings. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Josh Bleecher Snyder	73ad1f804b	wgengine/wgcfg: use autogenerated Clone methods ... Delete the manually written ones named Copy. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Josh Bleecher Snyder	a0dacba877	wgengine/magicsock: simplify legacy endpoint DstToString ... Legacy endpoints (addrSet) currently reconstruct their dst string when requested. Instead, store the dst string we were given to begin with. In addition to being simpler and cheaper, this makes less code aware of how to interpret endpoint strings. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Josh Bleecher Snyder	777c816b34	wgengine/wgcfg: return better errors from DeviceConfig, ReconfigDevice ... Prefer the error from the actual wireguard-go device method call, not {To,From}UAPI, as those tend to be less interesting I/O errors. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Josh Bleecher Snyder	1f6c4ba7c3	wgengine/wgcfg: prevent ReconfigDevice from hanging on error ... When wireguard-go's UAPI interface fails with an error, ReconfigDevice hangs. Fix that by buffering the channel and closing the writer after the call. The code now matches the corresponding code in DeviceConfig, where I got it right. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Josh Bleecher Snyder	ed63a041bf	wgengine/userspace: delete HandshakeDone ... It is unused, and has been since early Feb 2021 (Tailscale 1.6). We can't get delete the DeviceOptions entirely yet; first #1831 and #1839 need to go in, along with some wireguard-go changes. Deleting this chunk of code now will make the later commits more clearly correct. Pingers can now go too. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Brad Fitzpatrick	b8fb8264a5	wgengine/netstack: avoid delivering incoming packets to both netstack + host ... The earlier eb06ec172f fixed the flaky SSH issue (tailscale/corp#1725) by making sure that packets addressed to Tailscale IPs in hybrid netstack mode weren't delivered to netstack, but another issue remained: All traffic handled by netstack was also potentially being handled by the host networking stack, as the filter hook returned "Accept", which made it keep processing. This could lead to various random racey chaos as a function of OS/firewalls/routes/etc. Instead, once we inject into netstack, stop our caller's packet processing. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	1a1123d461	wgengine: fix pendopen debug to not track SYN+ACKs, show Node.Online state ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	eb06ec172f	wgengine/netstack: don't pass non-subnet traffic to netstack in hybrid mode ... Fixes tailscale/corp#1725 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	7629cd6120	net/tsaddr: add NewContainsIPFunc (move from wgengine) ... I want to use this from netstack but it's not exported. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Josh Bleecher Snyder	47ebd1e9a2	wgengine/router: use net.IP.Equal instead of bytes.Equal to compare IPs ... Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	3 years ago
Josh Bleecher Snyder	f91c2dfaca	wgengine/router: remove unused field ... Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	3 years ago
Josh Bleecher Snyder	9360f36ebd	all: use lower-case letters at the start of error message ... Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	3 years ago
Josh Bleecher Snyder	64047815b0	wgenengine/magicsock: delete cursed tests ... Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	3 years ago
Josh Bleecher Snyder	59026a291d	wgengine/wglog: improve wireguard-go logging rate limiting ... Prior to wireguard-go using printf-style logging, all wireguard-go logging occurred using format string "%s". We fixed that but continued to use %s when we rewrote peer identifiers into Tailscale style. This commit removes that %sl, which makes rate limiting work correctly. As a happy side-benefit, it should generate less garbage. Instead of replacing all wireguard-go peer identifiers that might occur anywhere in a fully formatted log string, assume that they only come from args. Check all args for things that look like *device.Peers and replace them with appropriately reformatted strings. There is a variety of ways that this could go wrong (unusual format verbs or modifiers, peer identifiers occurring as part of a larger printed object, future API changes), but none of them occur now, are likely to be added, or would be hard to work around if they did. Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	3 years ago
Josh Bleecher Snyder	1f94d43b50	wgengine/wglog: delay formatting ... The "stop phrases" we use all occur in wireguard-go in the format string. We can avoid doing a bunch of fmt.Sprintf work when they appear. Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	3 years ago
Josh Bleecher Snyder	20e04418ff	net/dns: add GOOS build tags ... Fixes #1786 Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	3 years ago
Josh Bleecher Snyder	7ee891f5fd	all: delete wgcfg.Key and wgcfg.PrivateKey ... For historical reasons, we ended up with two near-duplicate copies of curve25519 key types, one in the wireguard-go module (wgcfg) and one in the tailscale module (types/wgkey). Then we moved wgcfg to the tailscale module. We can now remove the wgcfg key type in favor of wgkey. Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	3 years ago
Josh Bleecher Snyder	9d542e08e2	wgengine/magicsock: always run ReceiveIPv6 ... One of the consequences of the bind refactoring in 6f23087175 is that attempting to bind an IPv6 socket will always result in c.pconn6.pconn being non-nil. If the bind fails, it'll be set to a placeholder packet conn that blocks forever. As a result, we can always run ReceiveIPv6 and health check it. This removes IPv4/IPv6 asymmetry and also will allow health checks to detect any IPv6 receive func failures. Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	3 years ago