tailscale

Commit Graph

Author	SHA1	Message	Date
Anton Tolchanov	227509547f	{control,net}: close idle connections of custom transports I noticed a few places with custom http.Transport where we are not closing idle connections when transport is no longer used. Updates tailscale/corp#21609 Signed-off-by: Anton Tolchanov <anton@tailscale.com>	3 months ago
Maisem Ali	2238ca8a05	go.mod: bump bart Updates #bart Signed-off-by: Maisem Ali <maisem@tailscale.com>	4 months ago
Maisem Ali	42cfbf427c	tsnet,wgengine/netstack: add ListenPacket and tests This adds a new ListenPacket function on tsnet.Server which acts mostly like `net.ListenPacket`. Unlike `Server.Listen`, this requires listening on a specific IP and does not automatically listen on both V4 and V6 addresses of the Server when the IP is unspecified. To test this, it also adds UDP support to tsdial.Dialer.UserDial and plumbs it through the localapi. Then an associated test to make sure the UDP functionality works from both sides. Updates #12182 Signed-off-by: Maisem Ali <maisem@tailscale.com>	5 months ago
Nick Khyl	caa3d7594f	ipn/ipnlocal, net/tsdial: plumb routes into tsdial and use them in UserDial We'd like to use tsdial.Dialer.UserDial instead of SystemDial for DNS over TCP. This is primarily necessary to properly dial internal DNS servers accessible over Tailscale and subnet routes. However, to avoid issues when switching between Wi-Fi and cellular, we need to ensure that we don't retain connections to any external addresses on the old interface. Therefore, we need to determine which dialer to use internally based on the configured routes. This plumbs routes and localRoutes from router.Config to tsdial.Dialer, and updates UserDial to use either the peer dialer or the system dialer, depending on the network address and the configured routes. Updates tailscale/corp#18725 Fixes #4529 Signed-off-by: Nick Khyl <nickk@tailscale.com>	6 months ago
Brad Fitzpatrick	3672f29a4e	net/netns, net/dns/resolver, etc: make netmon required in most places The goal is to move more network state accessors to netmon.Monitor where they can be cheaper/cached. But first (this change and others) we need to make sure the one netmon.Monitor is plumbed everywhere. Some notable bits: * tsdial.NewDialer is added, taking a now-required netmon * because a tsdial.Dialer always has a netmon, anything taking both a Dialer and a NetMon is now redundant; take only the Dialer and get the NetMon from that if/when needed. * netmon.NewStatic is added, primarily for tests Updates tailscale/corp#10910 Updates tailscale/corp#18960 Updates #7967 Updates #3299 Change-Id: I877f9cb87618c4eb037cee098241d18da9c01691 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	6 months ago
Andrew Dunham	375617c5c8	net/tsdial: assume all connections are affected if no default route is present If this happens, it results in us pessimistically closing more connections than might be necessary, but is more correct since we won't "miss" a change to the default route interface and keep trying to send data over a nonexistent interface, or one that can't reach the internet. Updates tailscale/corp#19124 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: Ia0b8b04cb8cdcb0da0155fd08751c9dccba62c1a	6 months ago
Brad Fitzpatrick	b0fbd85592	net/tsdial: partially fix "tailscale nc" (UserDial) on macOS At least in the case of dialing a Tailscale IP. Updates #4529 Change-Id: I9fd667d088a14aec4a56e23aabc2b1ffddafa3fe Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	7 months ago
Brad Fitzpatrick	e1bd7488d0	all: remove LenIter, use Go 1.22 range-over-int instead Updates #11058 Updates golang/go#65685 Change-Id: Ibb216b346e511d486271ab3d84e4546c521e4e22 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	8 months ago
Andrew Lytvynov	1302bd1181	all: cleanup unused code, part 1 (#10661 ) Run `staticcheck` with `U1000` to find unused code. This cleans up about a half of it. I'll do the other half separately to keep PRs manageable. Updates #cleanup Signed-off-by: Andrew Lytvynov <awly@tailscale.com>	10 months ago
Brad Fitzpatrick	0d991249e1	types/netmap: remove NetworkMap.{Addresses,MachineStatus} And convert all callers over to the methods that check SelfNode. Now we don't have multiple ways to express things in tests (setting fields on SelfNode vs NetworkMap, sometimes inconsistently) and don't have multiple ways to check those two fields (often only checking one or the other). Updates #9443 Change-Id: I2d7ba1cf6556142d219fae2be6f484f528756e3c Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Brad Fitzpatrick	926c990a09	types/netmap: start phasing out Addresses, add GetAddresses method NetworkMap.Addresses is redundant with the SelfNode.Addresses. This works towards a TODO to delete NetworkMap.Addresses and replace it with a method. This is similar to #9389. Updates #cleanup Change-Id: Id000509ca5d16bb636401763d41bdb5f38513ba0 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Brad Fitzpatrick	1262df0578	net/netmon, net/tsdial: add some link change metrics Updates #9040 Change-Id: I2c87572d79d2118bcf1f0122eccfe712c1bea9d5 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Brad Fitzpatrick	8b3ea13af0	net/tsdial: be smarter about when to close SystemDial conns It was too aggressive before, as it only had the ill-defined "Major" bool to work with. Now it can check more precisely. Updates #9040 Change-Id: I20967283b64af6a9cad3f8e90cff406de91653b8 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Brad Fitzpatrick	9089efea06	net/netmon: make ChangeFunc's signature take new ChangeDelta, not bool Updates #9040 Change-Id: Ia43752064a1a6ecefc8802b58d6eaa0b71cf1f84 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Brad Fitzpatrick	58a4fd43d8	types/netmap, all: use read-only tailcfg.NodeView in NetworkMap Updates #8948 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Maisem Ali	98ec8924c2	ipn/ipnlocal,net/tsdial: update docs/rename funcs Updates #cleanup Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
Mihai Parparita	7330aa593e	all: avoid repeated default interface lookups On some platforms (notably macOS and iOS) we look up the default interface to bind outgoing connections to. This is both duplicated work and results in logspam when the default interface is not available (i.e. when a phone has no connectivity, we log an error and thus cause more things that we will try to upload and fail). Fixed by passing around a netmon.Monitor to more places, so that we can use its cached interface state. Fixes #7850 Updates #7621 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	2 years ago
Mihai Parparita	4722f7e322	all: move network monitoring from wgengine/monitor to net/netmon We're using it in more and more places, and it's not really specific to our use of Wireguard (and does more just link/interface monitoring). Also removes the separate interface we had for it in sockstats -- it's a small enough package (we already pull in all of its dependencies via other paths) that it's not worth the extra complexity. Updates #7621 Updates #7850 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	2 years ago
Maisem Ali	85de580455	net/tsdial: do not use proxies when dialing out to PeerAPI Found this when adding a test that does a ping over PeerAPI. Our integration tests set up a trafficTrap to ensure that tailscaled does not call out to the internet, and it does so via a HTTP_PROXY. When adding a test for pings over PeerAPI, it triggered the trap and investigation lead to the realization that we were not removing the Proxy when trying to dial out to the PeerAPI. Updates tailscale/corp#8020 Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Andrew Dunham	280255acae	various: add golangci-lint, fix issues (#7905 ) This adds an initial and intentionally minimal configuration for golang-ci, fixes the issues reported, and adds a GitHub Action to check new pull requests against this linter configuration. Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I8f38fbc315836a19a094d0d3e986758b9313f163	2 years ago
Will Norris	71029cea2d	all: update copyright and license headers This updates all source files to use a new standard header for copyright and license declaration. Notably, copyright no longer includes a date, and we now use the standard SPDX-License-Identifier header. This commit was done almost entirely mechanically with perl, and then some minimal manual fixes. Updates #6865 Signed-off-by: Will Norris <will@tailscale.com>	2 years ago
Maisem Ali	22238d897b	all: standardize on PeerAPI Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Brad Fitzpatrick	da8def8e13	all: remove old +build tags The //go:build syntax was introduced in Go 1.17: https://go.dev/doc/go1.17#build-lines gofmt has kept the +build and go:build lines in sync since then, but enough time has passed. Time to remove them. Done with: perl -i -npe 's,^// \+build.*\n,,' $(git grep -l -F '+build') Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Josh Soref	d4811f11a0	all: fix spelling mistakes Signed-off-by: Josh Soref <2119212+jsoref@users.noreply.github.com>	2 years ago
Maisem Ali	a9f6cd41fd	all: use syncs.AtomicValue Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Brad Fitzpatrick	8725b14056	all: migrate more code code to net/netip directly Instead of going through the tailscale.com/net/netaddr transitional wrappers. Updates #5162 Change-Id: I3dafd1c2effa1a6caa9b7151ecf6edd1a3fda3dd Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	a12aad6b47	all: convert more code to use net/netip directly perl -i -npe 's,netaddr.IPPrefixFrom,netip.PrefixFrom,' $(git grep -l -F netaddr.) perl -i -npe 's,netaddr.IPPortFrom,netip.AddrPortFrom,' $(git grep -l -F netaddr. ) perl -i -npe 's,netaddr.IPPrefix,netip.Prefix,g' $(git grep -l -F netaddr. ) perl -i -npe 's,netaddr.IPPort,netip.AddrPort,g' $(git grep -l -F netaddr. ) perl -i -npe 's,netaddr.IP\b,netip.Addr,g' $(git grep -l -F netaddr. ) perl -i -npe 's,netaddr.IPv6Raw\b,netip.AddrFrom16,g' $(git grep -l -F netaddr. ) goimports -w . Then delete some stuff from the net/netaddr shim package which is no longer neeed. Updates #5162 Change-Id: Ia7a86893fe21c7e3ee1ec823e8aba288d4566cd8 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	6a396731eb	all: use various net/netip parse funcs directly Mechanical change with perl+goimports. Changed {Must,}Parse{IP,IPPrefix,IPPort} to their netip variants, then goimports -d . Finally, removed the net/netaddr wrappers, to prevent future use. Updates #5162 Change-Id: I59c0e38b5fbca5a935d701645789cddf3d7863ad Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	7eaf5e509f	net/netaddr: start migrating to net/netip via new netaddr adapter package Updates #5162 Change-Id: Id7bdec303b25471f69d542f8ce43805328d56c12 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Maisem Ali	5a1ef1bbb9	net/tsdial: add SystemDial as a wrapper on netns.Dial The connections returned from SystemDial are automatically closed when there is a major link change. Also plumb through the dialer to the noise client so that connections are auto-reset when moving from cellular to WiFi etc. Updates #3363 Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Brad Fitzpatrick	753f1bfad4	cmd/tailscale: write fewer known_hosts, resolve ssh host to FQDN early Updates #3802 Change-Id: Ic44fa2e6661a9c046e725c04fa6b8213d3d4d2b2 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	39ffa16853	net/dnscache, net/tsdial: add DNS caching to tsdial UserDial This is enough to handle the DNS queries as generated by Go's net package (which our HTTP/SOCKS client uses), and the responses generated by the ExitDNS DoH server. This isn't yet suitable for putting on 100.100.100.100 where a number of different DNS clients would hit it, as this doesn't yet do EDNS0. It might work, but it's untested and likely incomplete. Likewise, this doesn't handle anything about truncation, as the exchanges are entirely in memory between Go or DoH. That would also need to be handled later, if/when it's hooked up to 100.100.100.100. Updates #3507 Change-Id: I1736b0ad31eea85ea853b310c52c5e6bf65c6e2a Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	9c5c9d0a50	ipn/ipnlocal, net/tsdial: make SOCKS/HTTP dials use ExitDNS And simplify, unexport some tsdial/netstack stuff in the the process. Fixes #3475 Change-Id: I186a5a5cbd8958e25c075b4676f7f6e70f3ff76e Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	adc5997592	net/tsdial: give netstack a Dialer, start refactoring name resolution This starts to refactor tsdial.Dialer's name resolution to have different stages: in-memory MagicDNS vs system resolution. A future change will plug in ExitDNS resolution. This also plumbs a Dialer into netstack and unexports the dnsMap internals. And it removes some of the async AddNetworkMapCallback usage and replaces it with synchronous updates of the Dialer's netmap from LocalBackend, since the LocalBackend has the Dialer too. Updates #3475 Change-Id: Idcb7b1169878c74f0522f5151031ccbc49fe4cb4 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	8775c646be	net/tsdial: make dialing to peerapi work in netstack mode With this, I'm able to send a Taildrop file (using "tailscale file cp") from a Linux machine running --tun=userspace-networking. Updates #2179 Change-Id: I4e7a4fb0fbda393e4fb483adb06b74054a02cfd0 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	ad3d6e31f0	net/tsdial: move macOS/iOS peerapi sockopt logic from LocalBackend Change-Id: I812cae027c40c70cdc701427b1a1850cd9bcd60c Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	c7fb26acdb	net/tsdial: also plumb TUN name and monitor into tsdial.Dialer In prep for moving stuff out of LocalBackend. Change-Id: I9725aa9c3ebc7275f8c40e040b326483c0340127 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	c37af58ea4	net/tsdial: move more weirdo dialing into new tsdial package, plumb Not done yet, but this move more of the outbound dial special casing from random packages into tsdial, which aspires to be the one unified place for all outbound dialing shenanigans. Then this plumbs it all around, so everybody is ultimately holding on to the same dialer. As of this commit, macOS/iOS using an exit node should be able to reach to the exit node's DoH DNS proxy over peerapi, doing the sockopt to stay within the Network Extension. A number of steps remain, including but limited to: * move a bunch more random dialing stuff * make netstack-mode tailscaled be able to use exit node's DNS proxy, teaching tsdial's resolver to use it when an exit node is in use. Updates #1713 Change-Id: I1e8ee378f125421c2b816f47bc2c6d913ddcd2f5 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	d5405c66b7	net/tsdial: start of new package to unify all outbound dialing complexity For now this just deletes the net/socks5/tssocks implementation (and the DNSMap stuff from wgengine/netstack) and moves it into net/tsdial. Then initialize a Dialer early in tailscaled, currently only use for the outbound and SOCKS5 proxies. It will be plumbed more later. Notably, it needs to get down into the DNS forwarder for exit node DNS forwading in netstack mode. But it will also absorb all the peerapi setsockopt and netns Dial and tlsdial complexity too. Updates #1713 Change-Id: Ibc6d56ae21a22655b2fa1002d8fc3f2b2ae8b6df Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago

39 Commits (2aa9125ac438ffa902158b5bedf9791c93117b9b)