tailscale

Commit Graph

Author	SHA1	Message	Date
Jordan Whited	0926954cf5	net/tstun,wgengine/netstack: implement TCP GRO for local services (#13315 ) Throughput improves substantially when measured via netstack loopback (TS_DEBUG_NETSTACK_LOOPBACK_PORT). Before (`d21ebc2`): jwhited@i5-12400-2:~$ iperf3 -V -c 100.100.100.100 Starting Test: protocol: TCP, 1 streams, 131072 byte blocks Test Complete. Summary Results: [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 5.77 GBytes 4.95 Gbits/sec 0 sender [ 5] 0.00-10.01 sec 5.77 GBytes 4.95 Gbits/sec receiver After: jwhited@i5-12400-2:~$ iperf3 -V -c 100.100.100.100 Starting Test: protocol: TCP, 1 streams, 131072 byte blocks Test Complete. Summary Results: [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 12.7 GBytes 10.9 Gbits/sec 0 sender [ 5] 0.00-10.00 sec 12.7 GBytes 10.9 Gbits/sec receiver Updates tailscale/corp#22754 Signed-off-by: Jordan Whited <jordan@tailscale.com>	2 months ago
Jordan Whited	df6014f1d7	net/tstun,wgengine{/netstack/gro}: refactor and re-enable gVisor GRO for Linux (#13172 ) In `2f27319baf` we disabled GRO due to a data race around concurrent calls to tstun.Wrapper.Write(). This commit refactors GRO to be thread-safe, and re-enables it on Linux. This refactor now carries a GRO type across tstun and netstack APIs with a lifetime that is scoped to a single tstun.Wrapper.Write() call. In `25f0a3fc8f` we used build tags to prevent importation of gVisor's GRO package on iOS as at the time we believed it was contributing to additional memory usage on that platform. It wasn't, so this commit simplifies and removes those build tags. Updates tailscale/corp#22353 Updates tailscale/corp#22125 Updates #6816 Signed-off-by: Jordan Whited <jordan@tailscale.com>	2 months ago
Andrew Dunham	72c8f7700b	wgengine/netstack: add test for #12448 This refactors the logic for determining whether a packet should be sent to the host or not into a function, and then adds tests for it. Updates #11304 Updates #12448 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: Ief9afa98eaffae00e21ceb7db073c61b170355e5	5 months ago
Andrew Dunham	8f7f9ac17e	wgengine/netstack: handle 4via6 routes that are advertised by the same node Previously, a node that was advertising a 4via6 route wouldn't be able to make use of that same route; the packet would be delivered to Tailscale, but since we weren't accepting it in handleLocalPackets, the packet wouldn't be delivered to netstack and would never hit the 4via6 logic. Let's add that support so that usage of 4via6 is consistent regardless of where the connection is initiated from. Updates #11304 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: Ic28dc2e58080d76100d73b93360f4698605af7cb	6 months ago
Brad Fitzpatrick	21509db121	ipn/ipnlocal, all: plumb health trackers in tests I saw some panics in CI, like: 2024-05-08T04:30:25.9553518Z ## WARNING: (non-fatal) nil health.Tracker (being strict in CI): 2024-05-08T04:30:25.9554043Z goroutine 801 [running]: 2024-05-08T04:30:25.9554489Z tailscale.com/health.(Tracker).nil(0x0) 2024-05-08T04:30:25.9555086Z tailscale.com/health/health.go:185 +0x70 2024-05-08T04:30:25.9555688Z tailscale.com/health.(Tracker).SetUDP4Unbound(0x0, 0x0) 2024-05-08T04:30:25.9556373Z tailscale.com/health/health.go:532 +0x2f 2024-05-08T04:30:25.9557296Z tailscale.com/wgengine/magicsock.(Conn).bindSocket(0xc0003b4808, 0xc0003b4878, {0x1fbca53, 0x4}, 0x0) 2024-05-08T04:30:25.9558301Z tailscale.com/wgengine/magicsock/magicsock.go:2481 +0x12c5 2024-05-08T04:30:25.9559026Z tailscale.com/wgengine/magicsock.(Conn).rebind(0xc0003b4808, 0x0) 2024-05-08T04:30:25.9559874Z tailscale.com/wgengine/magicsock/magicsock.go:2510 +0x16f 2024-05-08T04:30:25.9561038Z tailscale.com/wgengine/magicsock.NewConn({0xc000063c80, 0x0, 0xc000197930, 0xc000197950, 0xc000197960, {0x0, 0x0}, 0xc000197970, 0xc000198ee0, 0x0, ...}) 2024-05-08T04:30:25.9562402Z tailscale.com/wgengine/magicsock/magicsock.go:476 +0xd5f 2024-05-08T04:30:25.9563779Z tailscale.com/wgengine.NewUserspaceEngine(0xc000063c80, {{0x22c8750, 0xc0001976b0}, 0x0, {0x22c3210, 0xc000063c80}, {0x22c31d8, 0x2d3c900}, 0x0, 0x0, ...}) 2024-05-08T04:30:25.9564982Z tailscale.com/wgengine/userspace.go:389 +0x159d 2024-05-08T04:30:25.9565529Z tailscale.com/ipn/ipnlocal.newTestBackend(0xc000358b60) 2024-05-08T04:30:25.9566086Z tailscale.com/ipn/ipnlocal/serve_test.go:675 +0x2a5 2024-05-08T04:30:25.9566612Z ta Updates #11874 Change-Id: I3432ed52d670743e532be4642f38dbd6e3763b1b Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	6 months ago
Brad Fitzpatrick	7c1d6e35a5	all: use Go 1.22 range-over-int Updates #11058 Change-Id: I35e7ef9b90e83cac04ca93fd964ad00ed5b48430 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	7 months ago
Brad Fitzpatrick	dd6c76ea24	ipn: remove unused Options.LegacyMigrationPrefs I'm on a mission to simplify LocalBackend.Start and its locking and deflake some tests. I noticed this hasn't been used since March 2023 when it was removed from the Windows client in corp 66be796d33c. So, delete. Updates #11649 Change-Id: I40f2cb75fb3f43baf23558007655f65a8ec5e1b2 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	7 months ago
Andrew Dunham	7429e8912a	wgengine/netstack: fix bug with duplicate SYN packets in client limit This fixes a bug that was introduced in #11258 where the handling of the per-client limit didn't properly account for the fact that the gVisor TCP forwarder will return 'true' to indicate that it's handled a duplicate SYN packet, but not launch the handler goroutine. In such a case, we neither decremented our per-client limit in the wrapper function, nor did we do so in the handler function, leading to our per-client limit table slowly filling up without bound. Fix this by doing the same duplicate-tracking logic that the TCP forwarder does so we can detect such cases and appropriately decrement our in-flight counter. Updates tailscale/corp#12184 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: Ib6011a71d382a10d68c0802593f34b8153d06892	8 months ago
Andrew Dunham	c5abbcd4b4	wgengine/netstack: add a per-client limit for in-flight TCP forwards This is a fun one. Right now, when a client is connecting through a subnet router, here's roughly what happens: 1. The client initiates a connection to an IP address behind a subnet router, and sends a TCP SYN 2. The subnet router gets the SYN packet from netstack, and after running through acceptTCP, starts DialContext-ing the destination IP, without accepting the connection¹ 3. The client retransmits the SYN packet a few times while the dial is in progress, until either... 4. The subnet router successfully establishes a connection to the destination IP and sends the SYN-ACK back to the client, or... 5. The subnet router times out and sends a RST to the client. 6. If the connection was successful, the client ACKs the SYN-ACK it received, and traffic starts flowing As a result, the notification code in forwardTCP never notices when a new connection attempt is aborted, and it will wait until either the connection is established, or until the OS-level connection timeout is reached and it aborts. To mitigate this, add a per-client limit on how many in-flight TCP forwarding connections can be in-progress; after this, clients will see a similar behaviour to the global limit, where new connection attempts are aborted instead of waiting. This prevents a single misbehaving client from blocking all other clients of a subnet router by ensuring that it doesn't starve the global limiter. Also, bump the global limit again to a higher value. ¹ We can't accept the connection before establishing a connection to the remote server since otherwise we'd be opening the connection and then immediately closing it, which breaks a bunch of stuff; see #5503 for more details. Updates tailscale/corp#12184 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I76e7008ddd497303d75d473f534e32309c8a5144	8 months ago
Percy Wegmann	993acf4475	tailfs: initial implementation Add a WebDAV-based folder sharing mechanism that is exposed to local clients at 100.100.100.100:8080 and to remote peers via a new peerapi endpoint at /v0/tailfs. Add the ability to manage folder sharing via the new 'share' CLI sub-command. Updates tailscale/corp#16827 Signed-off-by: Percy Wegmann <percy@tailscale.com>	9 months ago
Brad Fitzpatrick	3d37328af6	wgengine, proxymap: split out port mapping from Engine to new type (Continuing quest to remove rando stuff from the "Engine") Updates #cleanup Change-Id: I77f39902c2194410c10c054b545d70c9744250b0 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Brad Fitzpatrick	6e967446e4	tsd: add package with System type to unify subsystem init, discovery This is part of an effort to clean up tailscaled initialization between tailscaled, tailscaled Windows service, tsnet, and the mac GUI. Updates #8036 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Will Norris	57a008a1e1	all: pass log IDs as the proper type rather than strings This change focuses on the backend log ID, which is the mostly commonly used in the client. Tests which don't seem to make use of the log ID just use the zero value. Signed-off-by: Will Norris <will@tailscale.com>	2 years ago
Maisem Ali	04b57a371e	ipn/ipnlocal: drop not required StateKey parameter This is #cleanup now that #7121 is merged. Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Will Norris	71029cea2d	all: update copyright and license headers This updates all source files to use a new standard header for copyright and license declaration. Notably, copyright no longer includes a date, and we now use the standard SPDX-License-Identifier header. This commit was done almost entirely mechanically with perl, and then some minimal manual fixes. Updates #6865 Signed-off-by: Will Norris <will@tailscale.com>	2 years ago
Andrew Dunham	58ad21b252	wgengine/netstack: fix data race in tests This uses the helper function added in #6173 to avoid flakes like: https://github.com/tailscale/tailscale/actions/runs/3826912237/jobs/6511078024 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: If3f1d3b9c0f64ffcb4ba9a30d3522ec49484f993	2 years ago
Claire Wang	a45c9f982a	wgengine/netstack: change netstack API to require LocalBackend The macOS client was forgetting to call netstack.Impl.SetLocalBackend. Change the API so that it can't be started without one, eliminating this class of bug. Then update all the callers. Updates #6764 Change-Id: I2b3a4f31fdfd9fdbbbbfe25a42db0c505373562f Signed-off-by: Claire Wang <claire@tailscale.com> Co-authored-by: Brad Fitzpatrick <bradfitz@tailscale.com> Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	caa2fe394f	wgengine/netstack: delete some dead code, old comment, use atomic int types Noticed while looking at something else; #cleanup. Change-Id: Icde7749363014eab9bebe1dd80708f5491f933d1 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
andig	14e8afe444	go.mod, etc: bump gvisor Fixes #6554 Change-Id: Ia04ae37a47b67fa57091c9bfe1d45a1842589aa8 Signed-off-by: andig <cpuidle@gmx.de>	2 years ago
Maisem Ali	18c7c3981a	ipn/ipnlocal: call checkPrefs in Start too We were not calling checkPrefs on `opts.Prefs` in (LocalBackend).Start(). Updates #713 Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Maisem Ali	4d330bac14	ipn/ipnlocal: add support for multiple user profiles Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Brad Fitzpatrick	79472a4a6e	wgengine/netstack: optimize shouldProcessInbound, avoiding 4via6 lookups All IPv6 packets for the self address were doing netip.Prefix.Contains lookups. If if we know they're for a self address (which we already previously computed and have sitting in a bool), then they can't be for a 4via6 range. Change-Id: Iaaaf1248cb3fecec229935a80548ead0eb4cb892 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Andrew Dunham	acf5839dd2	wgengine/netstack: add tests for shouldProcessInbound Inspired by #6235, let's explicitly test the behaviour of this function to ensure that we're not processing things we don't expect to. Change-Id: I158050a63be7410fb99452089ea607aaf89fe91a Signed-off-by: Andrew Dunham <andrew@tailscale.com>	2 years ago
Andrew Dunham	0607832397	wgengine/netstack: always respond to 4via6 echo requests (#5712 ) As the comment in the code says, netstack should always respond to ICMP echo requests to a 4via6 address, even if the netstack instance isn't normally processing subnet traffic. Follow-up to #5709 Change-Id: I504d0776c5824071b2a2e0e687bc33e24f6c4746 Signed-off-by: Andrew Dunham <andrew@tailscale.com>	2 years ago
Andrew Dunham	b9b0bf65a0	wgengine/netstack: handle 4via6 packets when pinging (#5709 ) Change-Id: Ib6ebbaa11219fb91b550ed7fc6ede61f83262e89 Signed-off-by: Andrew Dunham <andrew@tailscale.com>	2 years ago
Brad Fitzpatrick	a12aad6b47	all: convert more code to use net/netip directly perl -i -npe 's,netaddr.IPPrefixFrom,netip.PrefixFrom,' $(git grep -l -F netaddr.) perl -i -npe 's,netaddr.IPPortFrom,netip.AddrPortFrom,' $(git grep -l -F netaddr. ) perl -i -npe 's,netaddr.IPPrefix,netip.Prefix,g' $(git grep -l -F netaddr. ) perl -i -npe 's,netaddr.IPPort,netip.AddrPort,g' $(git grep -l -F netaddr. ) perl -i -npe 's,netaddr.IP\b,netip.Addr,g' $(git grep -l -F netaddr. ) perl -i -npe 's,netaddr.IPv6Raw\b,netip.AddrFrom16,g' $(git grep -l -F netaddr. ) goimports -w . Then delete some stuff from the net/netaddr shim package which is no longer neeed. Updates #5162 Change-Id: Ia7a86893fe21c7e3ee1ec823e8aba288d4566cd8 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	7eaf5e509f	net/netaddr: start migrating to net/netip via new netaddr adapter package Updates #5162 Change-Id: Id7bdec303b25471f69d542f8ce43805328d56c12 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Tom DNetto	7f45734663	assorted: documentation and readability fixes This were intended to be pushed to #4408, but in my excitement I forgot to git push :/ better late than never. Signed-off-by: Tom DNetto <tom@tailscale.com>	3 years ago
Tom DNetto	9e77660931	net/tstun,wgengine/{.,netstack}: handle UDP magicDNS traffic in netstack This change wires netstack with a hook for traffic coming from the host into the tun, allowing interception and handling of traffic to quad-100. With this hook wired, magicDNS queries over UDP are now handled within netstack. The existing logic in wgengine to handle magicDNS remains for now, but its hook operates after the netstack hook so the netstack implementation takes precedence. This is done in case we need to support platforms with netstack longer than expected. Signed-off-by: Tom DNetto <tom@tailscale.com>	3 years ago
James Tucker	c6ac29bcc4	wgengine/netstack: disable refsvfs2 leak tracking (#4378 ) In addition an envknob (TS_DEBUG_NETSTACK_LEAK_MODE) now provides access to set leak tracking to more useful values. Fixes #4309 Signed-off-by: James Tucker <james@tailscale.com>	3 years ago
Josh Bleecher Snyder	0868329936	all: use any instead of interface{} My favorite part of generics. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Brad Fitzpatrick	185825df11	wgengine/netstack: add a missing refcount decrement after packet injection Fixes #3762 Updates #3745 (probably fixes?) Change-Id: I1d3f0590fd5b8adfbc9110bc45ff717bb9e79aae Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	d5405c66b7	net/tsdial: start of new package to unify all outbound dialing complexity For now this just deletes the net/socks5/tssocks implementation (and the DNSMap stuff from wgengine/netstack) and moves it into net/tsdial. Then initialize a Dialer early in tailscaled, currently only use for the outbound and SOCKS5 proxies. It will be plumbed more later. Notably, it needs to get down into the DNS forwarder for exit node DNS forwading in netstack mode. But it will also absorb all the peerapi setsockopt and netns Dial and tlsdial complexity too. Updates #1713 Change-Id: Ibc6d56ae21a22655b2fa1002d8fc3f2b2ae8b6df Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	722859b476	wgengine/netstack: make SOCKS5 resolve names to IPv6 if self node when no IPv4 For instance, ephemeral nodes with only IPv6 addresses can now SOCKS5-dial out to names like "foo" and resolve foo's IPv6 address rather than foo's IPv4 address and get a "no route" (*tcpip.ErrNoRoute) error from netstack's dialer. Per https://github.com/tailscale/tailscale/issues/2268#issuecomment-870027626 which is only part of the isuse. Updates #2268 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago

34 Commits (209567e7a0b939cbc3b2067cb5ef5f89305bd075)