269 Commits (1f51bb68915eec6ba7e44a4fb184ff68b069d9d2)

Author	SHA1	Message	Date
Maisem Ali	395cb588b6	types/views: make SliceOf/MapOf panic if they see a pointer ... Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Maisem Ali	d04afc697c	cmd/viewer,types/views: add support for views of maps ... Updates #4635 Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Maisem Ali	9f3ad40707	tailcfg: use cmd/viewer instead of cmd/cloner. ... Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Maisem Ali	c4e9739251	cmd/viewer: add codegen tool for Views ... Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Maisem Ali	e409e59a54	cmd/cloner,util/codegen: refactor cloner internals to allow reuse ... Also run go generate again for Copyright updates. Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Brad Fitzpatrick	cc575fe4d6	net/dns: schedule DoH upgrade explicitly, fix Resolver.Addr confusion ... Two changes in one: * make DoH upgrades an explicitly scheduled send earlier, when we come up with the resolvers-and-delay send plan. Previously we were getting e.g. four Google DNS IPs and then spreading them out in time (for back when we only did UDP) but then later we added DoH upgrading at the UDP packet layer, which resulted in sometimes multiple DoH queries to the same provider running (each doing happy eyeballs dialing to 4x IPs themselves) for each of the 4 source IPs. Instead, take those 4 Google/Cloudflare IPs and schedule 5 things: first the DoH query (which can use all 4 IPs), and then each of the 4 IPs as UDP later. * clean up the dnstype.Resolver.Addr confusion; half the code was using it as an IP string (as documented) as half was using it as an IP:port (from some prior type we used), primarily for tests. Instead, document it was being primarily an IP string but also accepting an IP:port for tests, then add an accessor method on it to get the IPPort and use that consistently everywhere. Change-Id: Ifdd72b9e45433a5b9c029194d50db2b9f9217b53 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Joe Tsai	01adcfa688	tailcfg: add omitempty to all fields of Hostinfo (#4360) ... This reduces the noise when marshaling only a subset of this type. Signed-off-by: Joe Tsai <joetsai@digital-static.net>	3 years ago
Maisem Ali	bd073b8dd6	types/views: rename Generic to Unwrap ... Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Josh Bleecher Snyder	0868329936	all: use any instead of interface{} ... My favorite part of generics. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Maisem Ali	6b9d938c1a	types/views: add generic Slice[T] and remove StringSlice ... Also make IPPrefixSliceOf use Slice[netaddr.IPPrefix] as it also provides additional functions besides the standard ones provided by Slice[T]. Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Brad Fitzpatrick	61ee72940c	all: use Go 1.18's strings.Cut ... More remain. Change-Id: I6ec562cc1f687600758deae1c9d7dbd0d04004cb Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Maisem Ali	c85694fac4	types/views: add ContainsExitRoutes to IPPrefixSlice ... Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Maisem Ali	c7a8f0992d	ipn/ipnlocal: use views for Peer.PrimaryRoutes and Peer.Tags ... RELNOTE=`tailscale status --json` now shows Tags and PrimaryRoutes Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Josh Bleecher Snyder	66f5aa6814	types/logger: add more reserved top level field names ... Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Brad Fitzpatrick	84138450a4	types/logger, logtail: add mechanism to do structured JSON logs ... e.g. the change to ipnlocal in this commit ultimately logs out: {"logtail":{"client_time":"2022-02-17T20:40:30.511381153-08:00","server_time":"2022-02-18T04:40:31.057771504Z"},"type":"Hostinfo","val":{"GoArch":"amd64","Hostname":"tsdev","IPNVersion":"1.21.0-date.20220107","OS":"linux","OSVersion":"Debian 11.2 (bullseye); kernel=5.10.0-10-amd64"},"v":1} Change-Id: I668646b19aeae4a2fed05170d7b279456829c844 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Maisem Ali	72d8672ef7	tailcfg: make Node.Hostinfo a HostinfoView ... Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Maisem Ali	53998e26a6	tailcfg: introduce HostinfoView ... Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Brad Fitzpatrick	57115e923e	tailcfg: add start of SSH policy to be sent from control plane to nodes ... Updates #3802 Change-Id: Iec58f35d445aaa267d0f7e7e2f30c049c1df4c0e Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	857cd6c0d7	ipn/ipnstate: add TailnetName to status ... RELNOTE=tailscale status --json | jq .TailnetName Fixes tailscale/corp#3665 Change-Id: I85de027ba2781eb31ee1e0c5ab913b0dfa5b4c86 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	41fd4eab5c	envknob: add new package for all the strconv.ParseBool(os.Getenv(..)) ... A new package can also later record/report which knobs are checked and set. It also makes the code cleaner & easier to grep for env knobs. Change-Id: Id8a123ab7539f1fadbd27e0cbeac79c2e4f09751 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Josh Bleecher Snyder	deb2f5e793	types/logger: add Context and related helpers ... We often need both a log function and a context. We can do this by adding the log function as a context value. This commit adds helper glue to make that easy. It is designed to allow incremental adoption. Updates tailscale/corp#3138 Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
David Anderson	293431aaea	control/noise: use key.Machine{Public,Private} as appropriate. ... Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	0532eb30db	all: replace tailcfg.DiscoKey with key.DiscoPublic. ... Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	17b5782b3a	types/key: delete legacy NodeKey type. ... Fixes #3206 Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	7e6a1ef4f1	tailcfg: use key.NodePublic in wire protocol types. ... Updates #3206. Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	d6e7cec6a7	types/netmap: use key.NodePublic instead of tailcfg.NodeKey. ... Update #3206 Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	84c3a09a8d	types/key: export constants for key size, not a method. ... Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	ff16e58d23	tailcfg: move NodeKey type to types/key. ... This leaves behind a type alias and associated constructor, to allow for gradual switchover. Updates #3206. Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	b43362852c	types/key: delete legacy undifferentiated key types. ... Updates #3206 Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	743293d473	types/key: remove node key AsPublic/AsPrivate compat shims. ... Updates #3206. Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	ef241f782e	wgengine/magicsock: remove uses of tailcfg.DiscoKey. ... Updates #3206 Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	073a3ec416	types/key: correct ShortString representation of DiscoPublic. ... Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	06dccea416	types/key: fix license header on disco files. ... Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	05cc2f510b	types/key: new types for disco keys. ... Needed for #3206 to remove final uses of key.{Public,Private}. Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	15376f975b	types/wgkey: delete, no longer used. ... Updates #3206 Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
Josh Bleecher Snyder	94fb42d4b2	all: use testingutil.MinAllocsPerRun ... There are a few remaining uses of testing.AllocsPerRun: Two in which we only log the number of allocations, and one in which dynamically calculate the allocations target based on a different AllocsPerRun run. This also allows us to tighten the "no allocs" test in wgengine/filter. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
David Anderson	6e5175373e	types/netmap: use new node key type. ... Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	0c546a28ba	types/persist: use new node key type. ... Updates #3206 Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	a9c78910bd	wgengine/wgcfg: convert to use new node key type. ... Updates #3206 Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	bc89a796ec	types/key: add a dedicated type for node keys. ... Complete with converters to all the other types that represent a node key today, so the new type can gradually subsume old ones. Updates #3206 Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
Brad Fitzpatrick	9310713bfb	all: fix some js/wasm compilation issues ... Change-Id: I05a3a4835e225a1e413ec3540a7c7e4a2d477084 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Joe Tsai	9af27ba829	cmd/cloner: mangle "go:generate" in cloner.go ... The "go generate" command blindly looks for "//go:generate" anywhere in the file regardless of whether it is truly a comment. Prevent this false positive in cloner.go by mangling the string to look less like "//go:generate". Signed-off-by: Joe Tsai <joetsai@digital-static.net>	3 years ago
David Crawshaw	45f51d4fa6	types/opt: implement Bool.Scan ... Signed-off-by: David Crawshaw <crawshaw@tailscale.com>	3 years ago
Brad Fitzpatrick	aae622314e	tailcfg, health: add way for control plane to add problems to health check ... So if the control plane knows that something's broken about the node, it can include problem(s) in MapResponse and "tailscale status" will show it. (and GUIs in the future, as it's in ipnstate.Status/JSON) This also bumps the MapRequest.Version, though it's not strictly required. Doesn't hurt. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Josh Bleecher Snyder	d5ab18b2e6	cmd/cloner: add Clone context to regen struct assignments ... Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Josh Bleecher Snyder	4bbf5a8636	cmd/cloner: reduce diff noise when changing command ... Spelling out the command to run for every type means that changing the command makes for a large, repetitive diff. Stop doing that. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
David Crawshaw	9502b515f1	net/dns: replace resolver IPs with type for DoH ... We currently plumb full URLs for DNS resolvers from the control server down to the client. But when we pass the values into the net/dns package, we throw away any URL that isn't a bare IP. This commit continues the plumbing, and gets the URL all the way to the built in forwarder. (It stops before plumbing URLs into the OS configurations that can handle them.) For #2596 Signed-off-by: David Crawshaw <crawshaw@tailscale.com>	3 years ago
Dave Anderson	980acc38ba	types/key: add a special key with custom serialization for control private keys (#2792) ... * Revert "Revert "types/key: add MachinePrivate and MachinePublic."" This reverts commit 61c3b98a24. Signed-off-by: David Anderson <danderson@tailscale.com> * types/key: add ControlPrivate, with custom serialization. ControlPrivate is just a MachinePrivate that serializes differently in JSON, to be compatible with how the Tailscale control plane historically serialized its private key. Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	61c3b98a24	Revert "types/key: add MachinePrivate and MachinePublic." ... Broke the tailscale control plane due to surprise different serialization. This reverts commit 4fdb88efe1.	3 years ago
David Anderson	4fdb88efe1	types/key: add MachinePrivate and MachinePublic. ... Plumb throughout the codebase as a replacement for the mixed use of tailcfg.MachineKey and wgkey.Private/Public. Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	923c98cd8f	types/wgkey: add TODO for a future API change. ... Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
Josh Bleecher Snyder	4c8b5fdec4	control/controlclient: do not periodically print full netmap ... The netmaps can get really large. Printing, processing, and uploading them is expensive. Only print the header on an ongoing basis. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
David Crawshaw	360223fccb	types/dnstype: introduce new package for Resolver ... So the type can be used in net/dns without introducing a tailcfg dependency. For #2596 Signed-off-by: David Crawshaw <crawshaw@tailscale.com>	3 years ago
Josh Bleecher Snyder	a5da4ed981	all: gofmt with Go 1.17 ... This adds "//go:build" lines and tidies up existing "// +build" lines. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Brad Fitzpatrick	171ec9f8f4	control/{controlknobs,controlclient}: simplify knobs API, fix controlclient crash ... From integration tests elsewhere: panic: runtime error: invalid memory address or nil pointer dereference [signal SIGSEGV: segmentation violation code=0x1 addr=0x70 pc=0x845c9b] goroutine 226 [running]: tailscale.com/control/controlclient.(*Direct).sendMapRequest(0xc00053e1e0, 0x16670f0, 0xc000353780, 0xffffffffffffffff, 0xc0003e5f10, 0x0, 0x0) /home/runner/go/pkg/mod/tailscale.com@v1.1.1-0.20210715222212-1bb6abc604c1/control/controlclient/direct.go:803 +0x19bb tailscale.com/control/controlclient.(*Direct).PollNetMap(...) /home/runner/go/pkg/mod/tailscale.com@v1.1.1-0.20210715222212-1bb6abc604c1/control/controlclient/direct.go:574 tailscale.com/control/controlclient.(*Auto).mapRoutine(0xc00052a1e0) /home/runner/go/pkg/mod/tailscale.com@v1.1.1-0.20210715222212-1bb6abc604c1/control/controlclient/auto.go:464 +0x571 created by tailscale.com/control/controlclient.(*Auto).Start /home/runner/go/pkg/mod/tailscale.com@v1.1.1-0.20210715222212-1bb6abc604c1/control/controlclient/auto.go:151 +0x65 exit status 2 Also remove types/opt.Bool API addition which is now unnecessary. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
julianknodt	1bb6abc604	net/portmapper: add upnp port mapping ... Add in UPnP portmapping, using goupnp library in order to get the UPnP client and run the portmapping functions. This rips out anywhere where UPnP used to be in portmapping, and has a flow separate from PMP and PCP. RELNOTE=portmapper now supports UPnP mappings Fixes #682 Updates #2109 Signed-off-by: julianknodt <julianknodt@gmail.com>	3 years ago
Brad Fitzpatrick	8a4dffee07	types/logger: fix deadlock RateLimitedFn reentrancy ... Fix regression from 19c3e6cc9e which made the locking coarser. Found while debugging #2245, which ended up looking like a tswin/Windows issue where Crawshaw had blocked cmd.exe's output. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
David Crawshaw	297b3d6fa4	staticcheck.conf: turn off noisy lint errors ... Signed-off-by: David Crawshaw <crawshaw@tailscale.com>	3 years ago
Brad Fitzpatrick	e66d4e4c81	tailcfg, types/wgkey: add AppendTo methods on some types ... Add MarshalText-like appending variants. Like: https://pkg.go.dev/inet.af/netaddr#IP.AppendTo To be used by @josharian's pending deephash optimizations. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Josh Bleecher Snyder	5666663370	net/packet: use netaddr AppendTo methods ... This lets us remote the types/strbuilder package, which had only a single user. And it's faster. name old time/op new time/op delta String/tcp4-8 175ns ± 0% 58ns ± 1% -66.95% (p=0.000 n=10+9) String/tcp6-8 226ns ± 1% 136ns ± 1% -39.85% (p=0.000 n=10+10) String/udp4-8 175ns ± 1% 58ns ± 1% -67.01% (p=0.000 n=10+9) String/udp6-8 230ns ± 1% 140ns ± 0% -39.32% (p=0.000 n=10+9) String/icmp4-8 164ns ± 0% 50ns ± 1% -69.89% (p=0.000 n=10+10) String/icmp6-8 217ns ± 1% 129ns ± 0% -40.46% (p=0.000 n=10+10) String/igmp-8 196ns ± 0% 56ns ± 1% -71.32% (p=0.000 n=10+10) String/unknown-8 2.06ns ± 1% 2.06ns ± 2% ~ (p=0.985 n=10+10) name old alloc/op new alloc/op delta String/tcp4-8 32.0B ± 0% 32.0B ± 0% ~ (all equal) String/tcp6-8 168B ± 0% 96B ± 0% -42.86% (p=0.000 n=10+10) String/udp4-8 32.0B ± 0% 32.0B ± 0% ~ (all equal) String/udp6-8 168B ± 0% 96B ± 0% -42.86% (p=0.000 n=10+10) String/icmp4-8 32.0B ± 0% 32.0B ± 0% ~ (all equal) String/icmp6-8 104B ± 0% 64B ± 0% -38.46% (p=0.000 n=10+10) String/igmp-8 48.0B ± 0% 48.0B ± 0% ~ (all equal) String/unknown-8 0.00B 0.00B ~ (all equal) name old allocs/op new allocs/op delta String/tcp4-8 1.00 ± 0% 1.00 ± 0% ~ (all equal) String/tcp6-8 3.00 ± 0% 1.00 ± 0% -66.67% (p=0.000 n=10+10) String/udp4-8 1.00 ± 0% 1.00 ± 0% ~ (all equal) String/udp6-8 3.00 ± 0% 1.00 ± 0% -66.67% (p=0.000 n=10+10) String/icmp4-8 1.00 ± 0% 1.00 ± 0% ~ (all equal) String/icmp6-8 3.00 ± 0% 1.00 ± 0% -66.67% (p=0.000 n=10+10) String/igmp-8 1.00 ± 0% 1.00 ± 0% ~ (all equal) String/unknown-8 0.00 0.00 ~ (all equal) Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Josh Bleecher Snyder	25df067dd0	all: adapt to opaque netaddr types ... This commit is a mishmash of automated edits using gofmt: gofmt -r 'netaddr.IPPort{IP: a, Port: b} -> netaddr.IPPortFrom(a, b)' -w . gofmt -r 'netaddr.IPPrefix{IP: a, Port: b} -> netaddr.IPPrefixFrom(a, b)' -w . gofmt -r 'a.IP.Is4 -> a.IP().Is4' -w . gofmt -r 'a.IP.As16 -> a.IP().As16' -w . gofmt -r 'a.IP.Is6 -> a.IP().Is6' -w . gofmt -r 'a.IP.As4 -> a.IP().As4' -w . gofmt -r 'a.IP.String -> a.IP().String' -w . And regexps: \w*(.*)\.Port = (.*) -> $1 = $1.WithPort($2) \w*(.*)\.IP = (.*) -> $1 = $1.WithIP($2) And lots of manual fixups. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Josh Bleecher Snyder	e9066ee625	types/wgkey: optimize Key.ShortString ... name old time/op new time/op delta ShortString-8 82.6ns ± 0% 15.6ns ± 0% -81.07% (p=0.008 n=5+5) name old alloc/op new alloc/op delta ShortString-8 104B ± 0% 8B ± 0% -92.31% (p=0.008 n=5+5) name old allocs/op new allocs/op delta ShortString-8 3.00 ± 0% 1.00 ± 0% -66.67% (p=0.008 n=5+5) Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Josh Bleecher Snyder	7cd4766d5e	types/wgkey: add BenchmarkShortString ... Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Josh Bleecher Snyder	05bed64772	types/wgkey: simplify Key.UnmarshalJSON ... Instead of calling ParseHex, do the hex.Decode directly. name old time/op new time/op delta UnmarshalJSON-8 86.9ns ± 0% 42.6ns ± 0% -50.94% (p=0.000 n=15+14) name old alloc/op new alloc/op delta UnmarshalJSON-8 128B ± 0% 0B -100.00% (p=0.000 n=15+15) name old allocs/op new allocs/op delta UnmarshalJSON-8 2.00 ± 0% 0.00 -100.00% (p=0.000 n=15+15) Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Brad Fitzpatrick	eb06ec172f	wgengine/netstack: don't pass non-subnet traffic to netstack in hybrid mode ... Fixes tailscale/corp#1725 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Josh Bleecher Snyder	78d4c561b5	types/logger: add key grinder stats lines to rate-limiting exemption list ... Updates #1749 Co-authored-by: Brad Fitzpatrick <bradfitz@tailscale.com> Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Josh Bleecher Snyder	f116a4c44f	types/logger: fix rate limiter allowlist ... Upstream wireguard-go renamed the interface method from CreateEndpoint to ParseEndpoint. I updated the log call site but not the allowlist. Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	4 years ago
Avery Pennarun	19c3e6cc9e	types/logger: rate limited: more hysteresis, better messages. ... - Switch to our own simpler token bucket, since x/time/rate is missing necessary stuff (can't provide your own time func; can't check the current bucket contents) and it's overkill anyway. - Add tests that actually include advancing time. - Don't remove the rate limit on a message until there's enough room to print at least two more of them. When we do, we'll also print how many we dropped, as a contextual reminder that some were previously lost. (This is more like how the Linux kernel does it.) - Reformat the [RATE LIMITED] messages to be shorter, and to not corrupt original message. Instead, we print the message, then print its format string. - Use %q instead of \"%s\", for more accurate parsing later, if the format string contained quotes. Fixes #1772 Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	4 years ago
Josh Bleecher Snyder	4037fc25c5	types/wgkey: use value receiver with MarshalJSON ... Pointer receivers used with MarshalJSON are code rakes. https://github.com/golang/go/issues/22967 https://github.com/dominikh/go-tools/issues/911 I just stepped on one, and it hurt. Turn it over. While we're here, optimize the code a bit. name old time/op new time/op delta MarshalJSON-8 184ns ± 0% 44ns ± 0% -76.03% (p=0.000 n=20+19) name old alloc/op new alloc/op delta MarshalJSON-8 184B ± 0% 80B ± 0% -56.52% (p=0.000 n=20+20) name old allocs/op new allocs/op delta MarshalJSON-8 4.00 ± 0% 1.00 ± 0% -75.00% (p=0.000 n=20+20) Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	4 years ago
Josh Bleecher Snyder	7ee891f5fd	all: delete wgcfg.Key and wgcfg.PrivateKey ... For historical reasons, we ended up with two near-duplicate copies of curve25519 key types, one in the wireguard-go module (wgcfg) and one in the tailscale module (types/wgkey). Then we moved wgcfg to the tailscale module. We can now remove the wgcfg key type in favor of wgkey. Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>	4 years ago
Brad Fitzpatrick	6d64107f26	types/netmap: remove some old TODOs ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	64c80129f1	types/netmap: add some docs/warning to NetworkMap ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	2074dfa5e0	types/preftype: don't use iota for consts persisted to disk ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	01b90df2fa	net/packet, wgengine/filter: support SCTP ... Add proto to flowtrack.Tuple. Add types/ipproto leaf package to break a cycle. Server-side ACL work remains. Updates #1516 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	c64bd587ae	net/portmapper: add NAT-PMP client, move port mapping service probing ... * move probing out of netcheck into new net/portmapper package * use PCP ANNOUNCE op codes for PCP discovery, rather than causing short-lived (sub-second) side effects with a 1-second-expiring map + delete. * track when we heard things from the router so we can be less wasteful in querying the router's port mapping services in the future * use portmapper from magicsock to map a public port Fixes #1298 Fixes #1080 Fixes #1001 Updates #864 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	1e7a35b225	types/netmap: split controlclient.NetworkMap off into its own leaf package ... Updates #1278 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	ddfcc4326c	types/persist: split controlclient.Persist into a small leaf package ... This one alone doesn't modify the global dependency map much (depaware.txt if anything looks slightly worse), but it leave controlclient as only containing NetworkMap: bradfitz@tsdev:~/src/tailscale.com/ipn$ grep -F "controlclient." *.go backend.go: NetMap *controlclient.NetworkMap // new netmap received fake_test.go: b.notify(Notify{NetMap: &controlclient.NetworkMap{}}) fake_test.go: b.notify(Notify{NetMap: &controlclient.NetworkMap{}}) handle.go: netmapCache *controlclient.NetworkMap handle.go:func (h *Handle) NetMap() *controlclient.NetworkMap { Once that goes into a leaf package, then ipn doesn't depend on controlclient at all, and then the client gets smaller. Updates #1278	4 years ago
Brad Fitzpatrick	d76334d2f0	ipn: split LocalBackend off into new ipn/ipnlocal package ... And move a couple other types down into leafier packages. Now cmd/tailscale doesn't bring in netlink, magicsock, wgengine, etc. Fixes #1181 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Josh Bleecher Snyder	1e28207a15	types/logger: fix rateFree interaction with verbosity prefixes ... We log lines like this: c.logf("[v1] magicsock: disco: %v->%v (%v, %v) sent %v", c.discoShort, dstDisco.ShortString(), dstKey.ShortString(), derpStr(dst.String()), disco.MessageSummary(m)) The leading [v1] causes it to get unintentionally rate limited. Until we have a proper fix, work around it. Fixes #1216 Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
David Anderson	78338ac029	types/logger: trim spaces from the rate-limited example message. ... Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
Josh Bleecher Snyder	2d837f79dc	wgengine/magicsock: close test loggers once we're done with them ... This is a big hammer approach to helping with #1132. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
David Anderson	22507adf54	wgengine/magicsock: stop depending on UpdateDst in legacy codepaths. ... This makes connectivity between ancient and new tailscale nodes slightly worse in some cases, but only in cases where the ancient version would likely have failed to get connectivity anyway. Signed-off-by: David Anderson <danderson@tailscale.com>	4 years ago
Smitty	2bf49ddf90	Provide example when format string is rate limited ... Here's an example log line in the new format: [RATE LIMITED] format string "open-conn-track: timeout opening %v; no associated peer node" (example: "open-conn-track: timeout opening ([ip] => [ip]); no associated peer node") This should make debugging logging issues a bit easier, and give more context as to why something was rate limited. This change was proposed in a comment on #1110. Signed-off-by: Smitty <me@smitop.com>	4 years ago
Josh Bleecher Snyder	1e4604f60e	wgengine: quiet some wireguard-go logging ... The log lines that wireguard-go prints as it starts and stops its worker routines are mostly noise. They also happen after other work is completed, which causes failures in some of the log testing packages. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Josh Bleecher Snyder	56a7652dc9	wgkey: new package ... This is a replacement for the key-related parts of the wireguard-go wgcfg package. This is almost a straight copy/paste from the wgcfg package. I have slightly changed some of the exported functions and types to avoid stutter, added and tweaked some comments, and removed some now-unused code. To avoid having wireguard-go depend on this new package, wgcfg will keep its key types. We translate into and out of those types at the last minute. These few remaining uses will be eliminated alongside the rest of the wgcfg package. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
Smitty	f0b0a62873	Clarify that raw format strings are intentional ... This caused some confusion in issue #460, since usually raw format strings aren't printed directly. Hopefully by directly logging that they are intended to be raw format strings, this will be more clear. Rate limited format strings now look like: [RATE LIMITED] format string "control: sendStatus: %s: %v" Closes #460. Signed-off-by: Smitty <me@smitop.com>	4 years ago
Brad Fitzpatrick	19b0cfe89e	all: prepare for GOOS=ios in Go 1.16 ... Work with either way for now on iOS (darwin/arm64 vs ios/arm64). In February when Go 1.16 comes out we'll have a universal binary for darwin/arm64 (macOS) and will drop support for Go 1.15 and its darwin/amd64 meaning iOS. (it'll mean macOS). Context: * https://tip.golang.org/doc/go1.16#darwin * https://github.com/golang/go/issues/38485 * https://github.com/golang/go/issues/42100	4 years ago
Brad Fitzpatrick	8b904b1493	types/logger: fix LogOnChange to pass through format/args to underlying logger ... So they don't get interpretted as a format pattern or get rate-limited away in the wrong way.	4 years ago
Brad Fitzpatrick	691f1d5c1d	types/flagtype: fix bug showing the default port value (shown in --help)	4 years ago
Brad Fitzpatrick	86c271caba	types/logger: move RusagePrefixLog to logger package, disable by default ... The RusagePrefixLog is rarely useful, hasn't been useful in a long time, is rarely the measurement we need, and is pretty spammy (and syscall-heavy). Disable it by default. We can enable it when we're debugging memory.	4 years ago
Brad Fitzpatrick	8b94a769be	cmd/tailscaled: use the standard flag page instead of getopt ... Per discussion with @crawshaw. The CLI tool already used std flag anyway. If either of them, it would've made more sense for the CLI to use getopt.	4 years ago
Brad Fitzpatrick	309c15dfdd	types/key: restore Curve25519 clamping in NewPrivate ... It was lost during a copy from wgcfg.NewPresharedKey (which doesn't clamp) instead of wgcfg.NewPrivateKey (which does). Fortunately this was only use for discovery messages (not WireGuard) and only for ephemeral process-lifetime keys.	4 years ago
Elias Naur	fa45d606fa	types/logger: fix go test vet error ... Silences types/logger/logger_test.go:63:30: conversion from int to string yields a string of one rune Signed-off-by: Elias Naur <mail@eliasnaur.com>	4 years ago
Brad Fitzpatrick	6c74065053	wgengine/magicsock, tstest/natlab: start hooking up natlab to magicsock ... Also adds ephemeral port support to natlab. Work in progress. Pairing with @danderson.	4 years ago
Brad Fitzpatrick	0ea51872c9	types/logger: add rateFreePrefix rate-limiting-exempt log format prefixes ... Per conversation with @danderson.	4 years ago
Brad Fitzpatrick	0071888a17	types/opt: add Bool.EqualBool method ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Brad Fitzpatrick	53fb25fc2f	all: generate discovery key, plumb it around ... Not actually used yet. Updates #483	4 years ago
Dmytro Shynkevych	c12d87c54b	Fix concurrency issues in controlclient, ipn, types/logger (#456) ... Signed-Off-By: Dmytro Shynkevych <dmytro@tailscale.com>	5 years ago
Brad Fitzpatrick	dd6b96ba68	types/logger: add TS_DEBUG_LOG_RATE knob to easily turn off rate limiting	5 years ago
Brad Fitzpatrick	3f4a567032	types/strbuilder: add a variant of strings.Builder that uses sync.Pool ... ... and thus does not need to worry about when it escapes into unprovable fmt interface{} land. Also, add some convenience methods for efficiently writing integers.	5 years ago
Avery Pennarun	af9328c1b7	log rate limiting: reformat limiter messages, and use nonempty burst size. ... - Reformat the warning about a message being rate limited to print the format string, rather than the formatted message. This helps give a clue what "type" of message is being limited. - Change the rate limit warning to be [RATE LIMITED] in all caps. This uses less space on each line, plus is more noticeable. - In tailscaled, change the frequency to be less often (once every 5 seconds per format string) but to allow bursts of up to 5 messages. This greatly reduces the number of messages that are rate limited during startup, but allows us to tighten the limit even further during normal runtime. Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>	5 years ago
Wendi Yu	bb55694c95	wgengine: log node IDs when peers are added/removed (#381) ... Also stop logging data sent/received from nodes we're not connected to (ie all those `x`s being logged in the `peers: ` line) Signed-off-by: Wendi <wendi.yu@yahoo.ca>	5 years ago
Brad Fitzpatrick	fe97bedf67	types/logger: add ArgWriter	5 years ago
Brad Fitzpatrick	8eda667aa1	types/logger: simplify mutex locking in rate-limited logger ... Updates #365 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
David Anderson	48b1e85e8a	types/logger: fix deadlock in the burst case. ... Fixes #365. Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
Wendi Yu	0c69b4e00d	Implement rate limiting on log messages (#356) ... Implement rate limiting on log messages Addresses issue #317, where logs can get spammed with the same message nonstop. Created a rate limiting closure on logging functions, which limits the number of messages being logged per second based on format string. To keep memory usage as constant as possible, the previous cache purging at periodic time intervals has been replaced by an LRU that discards the oldest string when the capacity of the cache is reached. Signed-off-by: Wendi Yu <wendi.yu@yahoo.ca>	5 years ago
Brad Fitzpatrick	fefd7e10dc	types/structs: add structs.Incomparable annotation, use it where applicable ... Shotizam before and output queries: sqlite> select sum(size) from bin where func like 'type..%'; 129067 => 120216	5 years ago
Brad Fitzpatrick	45f2b53aca	all: remove unnecessary trailing newlines in format patterns for consistency ... And document on logger.Logf that it's unnecessary.	5 years ago
Brad Fitzpatrick	922d9546bf	wgengine: don't allocate so much in userspaceEngine.getStatus ... It was one of the top garbage producers on my phone. It's slated to be deleted and replaced anyway, but this helps in the meantime. The go.sum changes look scary, but the new dep only adds 240 bytes to the binary. The go.sum noise is just cmd/go being aggressive in including a lot of stuff (which is being fixed in Go 1.15, for what I understand). And I ran a go mod tidy, which added some too. (I had to write a custom wrapper around go mod tidy because this mod tidy normally breaks on tailscale.io/control being missing but referenced in tests) Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
David Anderson	96b2f20c5b	types/logger: add Discard helper.	5 years ago
Brad Fitzpatrick	810c1e9704	types/key: make Public implement TextMarshaler, TextUnmarshaler ... So it can be a map key with encoding/json	5 years ago
Brad Fitzpatrick	322499473e	cmd/tailscaled, wgengine, ipn: add /debug/ipn handler with world state ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	946df89fa6	types/logger: add adapters for Logf to std Logger/Writer	5 years ago
Brad Fitzpatrick	a6c695ba6b	types/key: add IsZero methods ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	a07af762e4	types/opt: add opt package for a new opt.Bool JSON type ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	3988ddc85d	types/logger: add WithPrefix, use it in two places ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	769e25e37b	derp: use new types/key package ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	2896be60db	Move "logger" package to under types, now that we have it. ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	747c7d7ce2	types/empty: add Message, stop using mysterious *struct{} ... Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago