tailscale

Commit Graph

Author	SHA1	Message	Date
Anton Tolchanov	227509547f	{control,net}: close idle connections of custom transports I noticed a few places with custom http.Transport where we are not closing idle connections when transport is no longer used. Updates tailscale/corp#21609 Signed-off-by: Anton Tolchanov <anton@tailscale.com>	4 months ago
VimT	e3f047618b	net/socks5: support UDP Updates #7581 Signed-off-by: VimT <me@vimt.me>	4 months ago
Jordan Whited	17c88a19be	net/captivedetection: mark TestAllEndpointsAreUpAndReturnExpectedResponse flaky (#13021 ) Updates #13019 Signed-off-by: Jordan Whited <jordan@tailscale.com>	4 months ago
Maisem Ali	f205efcf18	net/packet/checksum: fix v6 NAT We were copying 12 out of the 16 bytes which meant that the 1:1 NAT required would only work if the last 4 bytes happened to match between the new and old address, something that our tests accidentally had. Fix it by copying the full 16 bytes and make the tests also verify the addr and use rand addresses. Updates #9511 Signed-off-by: Maisem Ali <maisem@tailscale.com>	4 months ago
Andrea Gottardo	4055b63b9b	net/captivedetection: exclude cellular data interfaces (#13002 ) Updates tailscale/tailscale#1634 This PR optimizes captive portal detection on Android and iOS by excluding cellular data interfaces (`pdp*` and `rmnet`). As cellular networks do not present captive portals, frequent network switches between Wi-Fi and cellular would otherwise trigger captive detection unnecessarily, causing battery drain. Signed-off-by: Andrea Gottardo <andrea@gottardo.me>	4 months ago
Jordan Whited	f0230ce0b5	go.mod,net/tstun,wgengine/netstack: implement gVisor TCP GRO for Linux (#12921 ) This commit implements TCP GRO for packets being written to gVisor on Linux. Windows support will follow later. The wireguard-go dependency is updated in order to make use of newly exported IP checksum functions. gVisor is updated in order to make use of newly exported stack.PacketBuffer GRO logic. TCP throughput towards gVisor, i.e. TUN write direction, is dramatically improved as a result of this commit. Benchmarks show substantial improvement, sometimes as high as 2x. High bandwidth-delay product paths remain receive window limited, bottlenecked by gVisor's default TCP receive socket buffer size. This will be addressed in a follow-on commit. The iperf3 results below demonstrate the effect of this commit between two Linux computers with i5-12400 CPUs. There is roughly ~13us of round trip latency between them. The first result is from commit `57856fc` without TCP GRO. Starting Test: protocol: TCP, 1 streams, 131072 byte blocks - - - - - - - - - - - - - - - - - - - - - - - - - Test Complete. Summary Results: [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 4.77 GBytes 4.10 Gbits/sec 20 sender [ 5] 0.00-10.00 sec 4.77 GBytes 4.10 Gbits/sec receiver The second result is from this commit with TCP GRO. Starting Test: protocol: TCP, 1 streams, 131072 byte blocks - - - - - - - - - - - - - - - - - - - - - - - - - Test Complete. Summary Results: [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 10.6 GBytes 9.14 Gbits/sec 20 sender [ 5] 0.00-10.00 sec 10.6 GBytes 9.14 Gbits/sec receiver Updates #6816 Signed-off-by: Jordan Whited <jordan@tailscale.com>	4 months ago
Aaron Klotz	655b4f8fc5	net/netns: remove some logspam by avoiding logging parse errors due to unspecified addresses I updated the address parsing stuff to return a specific error for unspecified hosts passed as empty strings, and look for that when logging errors. I explicitly did not make parseAddress return a netip.Addr containing an unspecified address because at this layer, in the absence of any host, we don't necessarily know the address family we're dealing with. For the purposes of this code I think this is fine, at least until we implement #12588. Fixes #12979 Signed-off-by: Aaron Klotz <aaron@tailscale.com>	4 months ago
Brad Fitzpatrick	004dded0a8	net/tlsdial: relax self-signed cert health warning It seems some security software or macOS itself might be MITMing TLS (for ScreenTime?), so don't warn unless it fails x509 validation against system roots. Updates #3198 Change-Id: I6ea381b5bb6385b3d51da4a1468c0d803236b7bf Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 months ago
Aaron Klotz	0def4f8e38	net/netns: on Windows, fall back to default interface index when unspecified address is passed to ControlC and bindToInterfaceByRoute is enabled We were returning an error instead of binding to the default interface. Updates #12979 Signed-off-by: Aaron Klotz <aaron@tailscale.com>	4 months ago
Jordan Whited	7bc2ddaedc	go.mod,net/tstun,wgengine/netstack: implement gVisor TCP GSO for Linux (#12869 ) This commit implements TCP GSO for packets being read from gVisor on Linux. Windows support will follow later. The wireguard-go dependency is updated in order to make use of newly exported GSO logic from its tun package. A new gVisor stack.LinkEndpoint implementation has been established (linkEndpoint) that is loosely modeled after its predecessor (channel.Endpoint). This new implementation supports GSO of monster TCP segments up to 64K in size, whereas channel.Endpoint only supports up to 32K. linkEndpoint will also be required for GRO, which will be implemented in a follow-on commit. TCP throughput from gVisor, i.e. TUN read direction, is dramatically improved as a result of this commit. Benchmarks show substantial improvement through a wide range of RTT and loss conditions, sometimes as high as 5x. The iperf3 results below demonstrate the effect of this commit between two Linux computers with i5-12400 CPUs. There is roughly ~13us of round trip latency between them. The first result is from commit `57856fc` without TCP GSO. Starting Test: protocol: TCP, 1 streams, 131072 byte blocks - - - - - - - - - - - - - - - - - - - - - - - - - Test Complete. Summary Results: [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 2.51 GBytes 2.15 Gbits/sec 154 sender [ 5] 0.00-10.00 sec 2.49 GBytes 2.14 Gbits/sec receiver The second result is from this commit with TCP GSO. Starting Test: protocol: TCP, 1 streams, 131072 byte blocks - - - - - - - - - - - - - - - - - - - - - - - - - Test Complete. Summary Results: [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 12.6 GBytes 10.8 Gbits/sec 6 sender [ 5] 0.00-10.00 sec 12.6 GBytes 10.8 Gbits/sec receiver Updates #6816 Signed-off-by: Jordan Whited <jordan@tailscale.com>	4 months ago
Andrea Gottardo	949b15d858	net/captivedetection: call SetHealthy once connectivity restored (#12974 ) Fixes tailscale/tailscale#12973 Updates tailscale/tailscale#1634 There was a logic issue in the captive detection code we shipped in https://github.com/tailscale/tailscale/pull/12707. Assume a captive portal has been detected, and the user notified. Upon switching to another Wi-Fi that does not have a captive portal, we were issuing a signal to interrupt any pending captive detection attempt. However, we were not also setting the `captive-portal-detected` warnable to healthy. The result was that any "captive portal detected" alert would not be cleared from the UI. Also fixes a broken log statement value. Signed-off-by: Andrea Gottardo <andrea@gottardo.me>	4 months ago
Jonathan Nobels	8a8ecac6a7	net/dns, cmd/tailscaled: plumb system health tracker into dns cleanup (#12969 ) fixes tailscale#12968 The dns manager cleanup func was getting passed a nil health tracker, which will panic. Fixed to pass it the system health tracker. Signed-off-by: Jonathan Nobels <jonathan@tailscale.com>	4 months ago
Jonathan Nobels	19b0c8a024	net/dns, health: raise health warning for failing forwarded DNS queries (#12888 ) updates tailscale/corp#21823 Misconfigured, broken, or blocked DNS will often present as "internet is broken'" to the end user. This plumbs the health tracker into the dns manager and forwarder and adds a health warning with a 5 second delay that is raised on failures in the forwarder and lowered on successes. Signed-off-by: Jonathan Nobels <jonathan@tailscale.com>	4 months ago
Andrea Gottardo	6840f471c0	net/dnsfallback: set CanPort80 in static DERPMap (#12929 ) Updates tailscale/corp#21949 As discussed with @raggi, this PR updates the static DERPMap embedded in the client to reflect the availability of HTTP on the DERP servers run by Tailscale. Signed-off-by: Andrea Gottardo <andrea@gottardo.me>	4 months ago
Andrea Gottardo	90be06bd5b	health: introduce captive-portal-detected Warnable (#12707 ) Updates tailscale/tailscale#1634 This PR introduces a new `captive-portal-detected` Warnable which is set to an unhealthy state whenever a captive portal is detected on the local network, preventing Tailscale from connecting. ipn/ipnlocal: fix captive portal loop shutdown Change-Id: I7cafdbce68463a16260091bcec1741501a070c95 net/captivedetection: fix mutex misuse ipn/ipnlocal: ensure that we don't fail to start the timer Change-Id: I3e43fb19264d793e8707c5031c0898e48e3e7465 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Signed-off-by: Andrea Gottardo <andrea@gottardo.me>	4 months ago
Jordan Whited	f0b9d3f477	net/tstun: fix docstring for Wrapper.SetWGConfig (#12796 ) Updates #cleanup Signed-off-by: Jordan Whited <jordan@tailscale.com>	4 months ago
KevinLiang10	8d7b78f3f7	net/dns/publicdns: remove additional information in DOH URL passed to IPv6 address generation for controlD. This commit truncates any additional information (mainly hostnames) that's passed to controlD via DOH URL in DoHIPsOfBase. This change is to make sure only resolverID is passed to controlDv6Gen but not the additional information. Updates: #7946 Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>	4 months ago
Brad Fitzpatrick	c6af5bbfe8	all: add test for package comments, fix, add comments as needed Updates #cleanup Change-Id: Ic4304e909d2131a95a38b26911f49e7b1729aaef Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 months ago
Maisem Ali	2238ca8a05	go.mod: bump bart Updates #bart Signed-off-by: Maisem Ali <maisem@tailscale.com>	5 months ago
Nick Khyl	8bd442ba8c	util/winutil/gp, net/dns: add package for Group Policy API This adds a package with GP-related functions and types to be used in the future PRs. It also updates nrptRuleDatabase to use the new package instead of its own gpNotificationWatcher implementation. Updates #12687 Signed-off-by: Nick Khyl <nickk@tailscale.com>	5 months ago
Jonathan Nobels	4e5ef5b628	net/dns: fix broken dns benchmark tests (#12686 ) Updates tailscale/corp#20677 The recover function wasn't getting set in the benchmark tests. Default changed to an empty func. Signed-off-by: Jonathan Nobels <jonathan@tailscale.com>	5 months ago
James Tucker	b565a9faa7	cmd/xdpderper: add autodetection for default interface name This makes deployment easier in hetrogenous environments. Updates ENG-4274 Signed-off-by: James Tucker <james@tailscale.com>	5 months ago
Brad Fitzpatrick	9766f0e110	net/dns: move mutex before the field it guards And some misc doc tweaks for idiomatic Go style. Updates #cleanup Change-Id: I3ca45f78aaca037f433538b847fd6a9571a2d918 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 months ago
Andrew Dunham	0323dd01b2	ci: enable checklocks workflow for specific packages This turns the checklocks workflow into a real check, and adds annotations to a few basic packages as a starting point. Updates #12625 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I2b0185bae05a843b5257980fc6bde732b1bdd93f	5 months ago
Andrew Dunham	53a5d00fff	net/dns: ensure /etc/resolv.conf is world-readable even with a umask Previously, if we had a umask set (e.g. 0027) that prevented creating a world-readable file, /etc/resolv.conf would be created without the o+r bit and thus other users may be unable to resolve DNS. Since a umask only applies to file creation, chmod the file after creation and before renaming it to ensure that it has the appropriate permissions. Updates #12609 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I2a05d64f4f3a8ee8683a70be17a7da0e70933137	5 months ago
Andrew Dunham	a475c435ec	net/dns/resolver: fix test failure Updates #cleanup Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I0e815a69ee44ca0ff7c0ea0ca3c6904bbf67ed1f	5 months ago
Jonathan Nobels	27033c6277	net/dns: recheck DNS config on SERVFAIL errors (#12547 ) Fixes tailscale/corp#20677 Replaces the original attempt to rectify this (by injecting a netMon event) which was both heavy handed, and missed cases where the netMon event was "minor". On apple platforms, the fetching the interface's nameservers can and does return an empty list in certain situations. Apple's API in particular is very limiting here. The header hints at notifications for dns changes which would let us react ahead of time, but it's all private APIs. To avoid remaining in the state where we end up with no nameservers but we absolutely need them, we'll react to a lack of upstream nameservers by attempting to re-query the OS. We'll rate limit this to space out the attempts. It seems relatively harmless to attempt a reconfig every 5 seconds (triggered by an incoming query) if the network is in this broken state. Missing nameservers might possibly be a persistent condition (vs a transient error), but that would also imply that something out of our control is badly misconfigured. Tested by randomly returning [] for the nameservers. When switching between Wifi networks, or cell->wifi, this will randomly trigger the bug, and we appear to reliably heal the DNS state. Signed-off-by: Jonathan Nobels <jonathan@tailscale.com>	5 months ago
Aaron Klotz	7dd76c3411	net/netns: add Windows support for bind-to-interface-by-route This is implemented via GetBestInterfaceEx. Should we encounter errors or fail to resolve a valid, non-Tailscale interface, we fall back to returning the index for the default interface instead. Fixes #12551 Signed-off-by: Aaron Klotz <aaron@tailscale.com>	5 months ago
Aaron Klotz	d7a4f9d31c	net/dns: ensure multiple hosts with the same IP address are combined into a single HostEntry This ensures that each line has a unique IP address. Fixes #11939 Signed-off-by: Aaron Klotz <aaron@tailscale.com>	5 months ago
Brad Fitzpatrick	5ec01bf3ce	wgengine/filter: support FilterRules matching on srcIP node caps [capver 100] See #12542 for background. Updates #12542 Change-Id: Ida312f700affc00d17681dc7551ee9672eeb1789 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 months ago
Brad Fitzpatrick	162d593514	net/flowtrack: fix, test String method I meant to do this in the earlier change and had a git fail. To atone, add a test too while I'm here. Updates #12486 Updates #12507 Change-Id: I4943b454a2530cb5047636f37136aa2898d2ffc7 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 months ago
Brad Fitzpatrick	9e0a5cc551	net/flowtrack: optimize Tuple type for use as map key This gets UDP filter overhead closer to TCP. Still ~2x, but no longer ~3x. goos: darwin goarch: arm64 pkg: tailscale.com/wgengine/filter │ before │ after │ │ sec/op │ sec/op vs base │ FilterMatch/tcp-not-syn-v4-8 15.43n ± 3% 15.38n ± 5% ~ (p=0.339 n=10) FilterMatch/udp-existing-flow-v4-8 42.45n ± 0% 34.77n ± 1% -18.08% (p=0.000 n=10) geomean 25.59n 23.12n -9.65% Updates #12486 Change-Id: I595cfadcc6b7234604bed9c4dd4261e087c0d4c4 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 months ago
Brad Fitzpatrick	bd93c3067e	wgengine/filter/filtertype: make Match.IPProto a view I noticed we were allocating these every time when they could just share the same memory. Rather than document ownership, just lock it down with a view. I was considering doing all of the fields but decided to just do this one first as test to see how infectious it became. Conclusion: not very. Updates #cleanup (while working towards tailscale/corp#20514) Change-Id: I8ce08519de0c9a53f20292adfbecd970fe362de0 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 months ago
Brad Fitzpatrick	1f6645b19f	net/ipset: skip the loop over Prefixes when there's only one For pprof cosmetic/confusion reasons more than performance, but it might have tiny speed benefit. Updates #12486 Change-Id: I40e03714f3afa3a7e7f5e1fa99b81c7e889b91b6 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 months ago
Brad Fitzpatrick	bf2d13cfa0	net/ipset: return all closures from named wrappers So profiles show more useful names than just func1, func2, func3, etc. There will still be func1 on them all, but the symbol before will say what the lookup type is. Updates #12486 Change-Id: I910b024a7861394eb83d07f5a899eae338cb1f22 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 months ago
Brad Fitzpatrick	86e0f9b912	net/ipset, wgengine/filter/filtertype: add split-out packages This moves NewContainsIPFunc from tsaddr to new ipset package. And wgengine/filter types gets split into wgengine/filter/filtertype, so netmap (and thus the CLI, etc) doesn't need to bring in ipset, bart, etc. Then add a test making sure the CLI deps don't regress. Updates #1278 Change-Id: Ia246d6d9502bbefbdeacc4aef1bed9c8b24f54d5 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 months ago
Brad Fitzpatrick	64ac64fb66	net/tsaddr: use bart in NewContainsIPFunc, add tests, benchmarks NewContainsIPFunc was previously documented as performing poorly if there were many netip.Prefixes to search over. As such, we never it used it in such cases. This updates it to use bart at a certain threshold (over 6 prefixes, currently), at which point the bart lookup overhead pays off. This is currently kinda useless because we're not using it. But now we can and get wins elsewhere. And we can remove the caveat in the docs. goos: darwin goarch: arm64 pkg: tailscale.com/net/tsaddr │ before │ after │ │ sec/op │ sec/op vs base │ NewContainsIPFunc/empty-8 2.215n ± 11% 2.239n ± 1% +1.08% (p=0.022 n=10) NewContainsIPFunc/cidr-list-1-8 17.44n ± 0% 17.59n ± 6% +0.89% (p=0.000 n=10) NewContainsIPFunc/cidr-list-2-8 27.85n ± 0% 28.13n ± 1% +1.01% (p=0.000 n=10) NewContainsIPFunc/cidr-list-3-8 36.05n ± 0% 36.56n ± 13% +1.41% (p=0.000 n=10) NewContainsIPFunc/cidr-list-4-8 43.73n ± 0% 44.38n ± 1% +1.50% (p=0.000 n=10) NewContainsIPFunc/cidr-list-5-8 51.61n ± 2% 51.75n ± 0% ~ (p=0.101 n=10) NewContainsIPFunc/cidr-list-10-8 95.65n ± 0% 68.92n ± 0% -27.94% (p=0.000 n=10) NewContainsIPFunc/one-ip-8 4.466n ± 0% 4.469n ± 1% ~ (p=0.491 n=10) NewContainsIPFunc/two-ip-8 8.002n ± 1% 7.997n ± 4% ~ (p=0.697 n=10) NewContainsIPFunc/three-ip-8 27.98n ± 1% 27.75n ± 0% -0.82% (p=0.012 n=10) geomean 19.60n 19.07n -2.71% Updates #12486 Change-Id: I2e2320cc4384f875f41721374da536bab995c1ce Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 months ago
Nick Khyl	c32efd9118	various: create a catch-all NRPT rule when "Override local DNS" is enabled on Windows Without this rule, Windows 8.1 and newer devices issue parallel DNS requests to DNS servers associated with all network adapters, even when "Override local DNS" is enabled and/or a Mullvad exit node is being used, resulting in DNS leaks. This also adds "disable-local-dns-override-via-nrpt" nodeAttr that can be used to disable the new behavior if needed. Fixes tailscale/corp#20718 Signed-off-by: Nick Khyl <nickk@tailscale.com>	5 months ago
Andrea Gottardo	a8ee83e2c5	health: begin work to use structured health warnings instead of strings, pipe changes into ipn.Notify (#12406 ) Updates tailscale/tailscale#4136 This PR is the first round of work to move from encoding health warnings as strings and use structured data instead. The current health package revolves around the idea of Subsystems. Each subsystem can have (or not have) a Go error associated with it. The overall health of the backend is given by the concatenation of all these errors. This PR polishes the concept of Warnable introduced by @bradfitz a few weeks ago. Each Warnable is a component of the backend (for instance, things like 'dns' or 'magicsock' are Warnables). Each Warnable has a unique identifying code. A Warnable is an entity we can warn the user about, by setting (or unsetting) a WarningState for it. Warnables have: - an identifying Code, so that the GUI can track them as their WarningStates come and go - a Title, which the GUIs can use to tell the user what component of the backend is broken - a Text, which is a function that is called with a set of Args to generate a more detailed error message to explain the unhappy state Additionally, this PR also begins to send Warnables and their WarningStates through LocalAPI to the clients, using ipn.Notify messages. An ipn.Notify is only issued when a warning is added or removed from the Tracker. In a next PR, we'll get rid of subsystems entirely, and we'll start using structured warnings for all errors affecting the backend functionality. Signed-off-by: Andrea Gottardo <andrea@gottardo.me>	5 months ago
Jordan Whited	65888d95c9	derp/xdp,cmd/xdpderper: initial skeleton (#12390 ) This commit introduces a userspace program for managing an experimental eBPF XDP STUN server program. derp/xdp contains the eBPF pseudo-C along with a Go pkg for loading it and exporting its metrics. cmd/xdpderper is a package main user of derp/xdp. Updates tailscale/corp#20689 Signed-off-by: Jordan Whited <jordan@tailscale.com>	5 months ago
Jonathan Nobels	02e3c046aa	net/dns: re-query system resolvers on no-upstream resolver failure on apple platforms (#12398 ) Fixes tailscale/corp#20677 On macOS sleep/wake, we're encountering a condition where reconfigure the network a little bit too quickly - before apple has set the nameservers for our interface. This results in a persistent condition where we have no upstream resolver and fail all forwarded DNS queries. No upstream nameservers is a legitimate configuration, and we have no (good) way of determining when Apple is ready - but if we need to forward a query, and we have no nameservers, then something has gone badly wrong and the network is very broken. A simple fix here is to simply inject a netMon event, which will go through the configuration dance again when we hit the SERVFAIL condition. Tested by artificially/randomly returning [] for the list of nameservers in the bespoke ipn-bridge code responsible for getting the nameservers. Signed-off-by: Jonathan Nobels <jonathan@tailscale.com>	5 months ago
Andrew Dunham	d0f1a838a6	net/dnscache: use parent context to perform lookup As an alterative to #11935 using #12003. Updates #11935 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I05f643fe812ceeaec5f266e78e3e529cab3a1ac3	5 months ago
Aaron Klotz	3511d1f8a2	cmd/tailscaled, net/dns, wgengine/router: start Windows child processes with DETACHED_PROCESS when I/O is being piped When we're starting child processes on Windows that are CLI programs that don't need to output to a console, we should pass in DETACHED_PROCESS as a CreationFlag on SysProcAttr. This prevents the OS from even creating a console for the child (and paying the associated time/space penalty for new conhost processes). This is more efficient than letting the OS create the console window and then subsequently trying to hide it, which we were doing at a few callsites. Fixes #12270 Signed-off-by: Aaron Klotz <aaron@tailscale.com>	5 months ago
Nick Khyl	4cdc4ed7db	net/dns/resolver: return an empty successful response instead of NXDomain when resolving A records for 4via6 domains As quad-100 is an authoritative server for 4via6 domains, it should always return responses with a response code of 0 (indicating no error) when resolving records for these domains. If there's no resource record of the specified type (e.g. A), it should return a response with an empty answer section rather than NXDomain. Such a response indicates that there is at least one RR of a different type (e.g., AAAA), suggesting the Windows stub resolver to look for it. Fixes tailscale/corp#20767 Signed-off-by: Nick Khyl <nickk@tailscale.com>	5 months ago
Irbe Krumina	bc53ebd4a0	ipn/{ipnlocal,localapi},net/netkernelconf,client/tailscale,cmd/containerboot: optionally enable UDP GRO forwarding for containers (#12410 ) Add a new TS_EXPERIMENTAL_ENABLE_FORWARDING_OPTIMIZATIONS env var that can be set for tailscale/tailscale container running as a subnet router or exit node to enable UDP GRO forwarding for improved performance. See https://tailscale.com/kb/1320/performance-best-practices#linux-optimizations-for-subnet-routers-and-exit-nodes This is currently considered an experimental approach; the configuration support is partially to allow further experimentation with containerized environments to evaluate the performance improvements. Updates tailscale/tailscale#12295 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	5 months ago
Brad Fitzpatrick	916c4db75b	net/dns: fix crash in tests Looks like #12346 as submitted with failing tests. Updates #12346 Change-Id: I582cd0dfb117686330d935d763d972373c5ae598 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	6 months ago
Andrea Gottardo	b65221999c	tailcfg,net/dns: add controlknob to disable battery split DNS on iOS (#12346 ) Updates corp#15802. Adds the ability for control to disable the recently added change that uses split DNS in more cases on iOS. This will allow us to disable the feature if it leads to regression in production. We plan to remove this knob once we've verified that the feature works properly. Signed-off-by: Andrea Gottardo <andrea@gottardo.me>	6 months ago
Brad Fitzpatrick	1ca323ac65	net/netcheck: fix probeProto.String result for IPv6 probes This bug was introduced in `e6b84f215` (May 2020) but was only used in tests when stringifying probeProto values on failure so it wasn't noticed for a long time. But then it was moved into non-test code in `8450a18aa` (Jun 2024) and I didn't notice during the code movement that it was wrong. It's still only used in failure paths in logs, but having wrong/ambiguous debugging information isn't the best. Whoops. Updates tailscale/corp#20654 Change-Id: I296c727ed1c292a04db7b46ecc05c07fc1abc774 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	6 months ago
Brad Fitzpatrick	8450a18aa9	net/netcheck: flesh out some logging in error paths Updates tailscale/corp#20654 Change-Id: Ie190f956b864985668f79b5b986438bbe07ce905	6 months ago
Maisem Ali	4a8cb1d9f3	all: use math/rand/v2 more Updates #11058 Signed-off-by: Maisem Ali <maisem@tailscale.com>	6 months ago

1 2 3 4 5 ...

1068 Commits (1ed958fe231c12890b77025c6b2aa2be0698c7ec)