tailscale

Commit Graph

Author	SHA1	Message	Date
James Tucker	a2eb1c22b0	wgengine/magicsock: allow disco communication without known endpoints Just because we don't have known endpoints for a peer does not mean that the peer should become unreachable. If we know the peers key, it should be able to call us, then we can talk back via whatever path it called us on. First step - don't drop the packet in this context. Updates tailscale/corp#19106 Signed-off-by: James Tucker <james@tailscale.com>	8 months ago
James Tucker	db760d0bac	cmd/tailscaled: move cleanup to an implicit action during startup This removes a potentially increased boot delay for certain boot topologies where they block on ExecStartPre that may have socket activation dependencies on other system services (such as systemd-resolved and NetworkManager). Also rename cleanup to clean up in affected/immediately nearby places per code review commentary. Fixes #11599 Signed-off-by: James Tucker <james@tailscale.com>	8 months ago
Maisem Ali	3f4c5daa15	wgengine/netstack: remove SubnetRouterWrapper It was used when we only supported subnet routers on linux and would nil out the SubnetRoutes slice as no other router worked with it, but now we support subnet routers on ~all platforms. The field it was setting to nil is now only used for network logging and nowhere else, so keep the field but drop the SubnetRouterWrapper as it's not useful. Updates #cleanup Change-Id: Id03f9b6ec33e47ad643e7b66e07911945f25db79 Signed-off-by: Maisem Ali <maisem@tailscale.com>	8 months ago
James Tucker	6e334e64a1	net/netcheck,wgengine/magicsock: align DERP frame receive time heuristics The netcheck package and the magicksock package coordinate via the health package, but both sides have time based heuristics through indirect dependencies. These were misaligned, so the implemented heuristic aimed at reducing DERP moves while there is active traffic were non-operational about 3/5ths of the time. It is problematic to setup a good test for this integration presently, so instead I added comment breadcrumbs along with the initial fix. Updates #8603 Signed-off-by: James Tucker <james@tailscale.com>	8 months ago
Joonas Kuorilehto	fe0cfec4ad	wgengine/router: enable ip forwarding on gokrazy Only on Gokrazy, set sysctls to enable IP forwarding so subnet routing and advertised exit node works. Fixes #11405 Signed-off-by: Joonas Kuorilehto <joneskoo@derbian.fi>	8 months ago
Percy Wegmann	853e3e29a0	wgengine/router: provide explicit hook to signal Android when VPN needs to be reconfigured This allows clients to avoid establishing their VPN multiple times when both routes and DNS are changing in rapid succession. Updates tailscale/corp#18928 Signed-off-by: Percy Wegmann <percy@tailscale.com>	8 months ago
Charlotte Brandhorst-Satzkorn	93618a3518	tailscale: update tailfs functions and vars to use drive naming (#11597 ) This change updates all tailfs functions and the majority of the tailfs variables to use the new drive naming. Updates tailscale/corp#16827 Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>	8 months ago
Charlotte Brandhorst-Satzkorn	14683371ee	tailscale: update tailfs file and package names (#11590 ) This change updates the tailfs file and package names to their new naming convention. Updates #tailscale/corp#16827 Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>	8 months ago
Irbe Krumina	5fb721d4ad	util/linuxfw,wgengine/router: skip IPv6 firewall configuration in partial iptables mode (#11546 ) We have hosts that support IPv6, but not IPv6 firewall configuration in iptables mode. We also have hosts that have some support for IPv6 firewall configuration in iptables mode, but do not have iptables filter table. We should: - configure ip rules for all hosts that support IPv6 - only configure firewall rules in iptables mode if the host has iptables filter table. Updates tailscale/tailscale#11540 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	8 months ago
Brad Fitzpatrick	a36cfb4d3d	tailcfg, ipn/ipnlocal, wgengine/magicsock: add only-tcp-443 node attr Updates tailscale/corp#17879 Change-Id: I0dc305d147b76c409cf729b599a94fa723aef0e0 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	8 months ago
James Tucker	3f7313dbdb	util/linuxfw,wgengine/router: enable IPv6 configuration when netfilter is disabled Updates #11434 Signed-off-by: James Tucker <james@tailscale.com>	8 months ago
Joe Tsai	85febda86d	all: use zstdframe where sensible (#11491 ) Use the zstdframe package where sensible instead of plumbing around our own zstd.Encoder just for stateless operations. This causes logtail to have a dependency on zstd, but that's arguably okay since zstd support is implicit to the protocol between a client and the logging service. Also, virtually every caller to logger.NewLogger was manually setting up a zstd.Encoder anyways, meaning that zstd was functionally always a dependency. Updates #cleanup Updates tailscale/corp#18514 Signed-off-by: Joe Tsai <joetsai@digital-static.net>	9 months ago
Brad Fitzpatrick	5d1c72f76b	wgengine/magicsock: don't use endpoint debug ringbuffer on mobile. Save some memory. Updates tailscale/corp#18514 Change-Id: Ibcaf3c6d8e5cc275c81f04141d0f176e2249509b Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	9 months ago
Andrew Dunham	6da1dc84de	wgengine: fix logger data race in tests Observed in: https://github.com/tailscale/tailscale/actions/runs/8350904950/job/22858266932?pr=11463 Updates #11226 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I9b57db4b34b6ad91d240cd9fa7e344fc0376d52d	9 months ago
Andrew Dunham	7429e8912a	wgengine/netstack: fix bug with duplicate SYN packets in client limit This fixes a bug that was introduced in #11258 where the handling of the per-client limit didn't properly account for the fact that the gVisor TCP forwarder will return 'true' to indicate that it's handled a duplicate SYN packet, but not launch the handler goroutine. In such a case, we neither decremented our per-client limit in the wrapper function, nor did we do so in the handler function, leading to our per-client limit table slowly filling up without bound. Fix this by doing the same duplicate-tracking logic that the TCP forwarder does so we can detect such cases and appropriately decrement our in-flight counter. Updates tailscale/corp#12184 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: Ib6011a71d382a10d68c0802593f34b8153d06892	9 months ago
Andrew Dunham	f072d017bd	wgengine/magicsock: don't change DERP home when not connected to control This pretty much always results in an outage because peers won't discover our new home region and thus won't be able to establish connectivity. Updates tailscale/corp#18095 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: Ic0d09133f198b528dd40c6383b16d7663d9d37a7	9 months ago
Andrew Dunham	62cf83eb92	go.mod: bump gvisor The `stack.PacketBufferPtr` type no longer exists; replace it with `*stack.PacketBuffer` instead. Updates #8043 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: Ib56ceff09166a042aa3d9b80f50b2aa2d34b3683	9 months ago
Andrew Dunham	4338db28f7	wgengine/magicsock: prefer link-local addresses to private ones Since link-local addresses are definitionally more likely to be a direct (lower-latency, more reliable) connection than a non-link-local private address, give those a bit of a boost when selecting endpoints. Updates #8097 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I93fdeb07de55ba39ba5fcee0834b579ca05c2a4e	9 months ago
Brad Fitzpatrick	f18f591bc6	wgengine: plumb the PeerByKey from wgengine to magicsock This was just added in `69f4b459` which doesn't yet use it. This still doesn't yet use it. It just pushes it down deeper into magicsock where it'll used later. Updates #7617 Change-Id: If2f8fd380af150ffc763489e1ff4f8ca2899fac6 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	9 months ago
Percy Wegmann	2d5d6f5403	ipn,wgengine: only intercept TailFS traffic on quad 100 This fixes a regression introduced with `993acf4` and released in v1.60.0. The regression caused us to intercept all userspace traffic to port 8080 which prevented users from exposing their own services to their tailnet at port 8080. Now, we only intercept traffic to port 8080 if it's bound for 100.100.100.100 or fd7a:115c:a1e0::53. Fixes #11283 Signed-off-by: Percy Wegmann <percy@tailscale.com> (cherry picked from commit `17cd0626f3`)	9 months ago
Brad Fitzpatrick	69f4b4595a	wgengine{,/wgint}: add wgint.Peer wrapper type, add to wgengine.Engine This adds a method to wgengine.Engine and plumbed down into magicsock to add a way to get a type-safe Tailscale-safe wrapper around a wireguard-go device.Peer that only exposes methods that are safe for Tailscale to use internally. It also removes HandshakeAttempts from PeerStatusLite that was just added as it wasn't needed yet and is now accessible ala cart as needed from the Peer type accessor. None of this is used yet. Updates #7617 Change-Id: I07be0c4e6679883e6eeddf8dbed7394c9e79c5f4 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	9 months ago
Brad Fitzpatrick	b4ff9a578f	wgengine: rename local variable from 'found' to conventional 'ok' Updates #cleanup Change-Id: I799dc86ea9e4a3a949592abdd8e74282e7e5d086 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	9 months ago
Brad Fitzpatrick	a8a525282c	wgengine: use slices.Clone in two places Updates #cleanup Change-Id: I1cb30efb6d09180e82b807d6146f37897ef99307 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	9 months ago
Brad Fitzpatrick	74b8985e19	ipn/ipnstate, wgengine: make PeerStatusLite.LastHandshake zero Time means none ... rather than 1970. Code was using IsZero against the 1970 team (which isn't a zero value), but fortunately not anywhere that seems to have mattered. Updates #cleanup Change-Id: I708a3f2a9398aaaedc9503678b4a8a311e0e019e Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	9 months ago
Andrew Dunham	3dd8ae2f26	net/tstun: fix spelling of "WireGuard" Updates #cleanup Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: Ida7e30f4689bc18f5f7502f53a0adb5ac3c7981a	9 months ago
Andrew Dunham	c5abbcd4b4	wgengine/netstack: add a per-client limit for in-flight TCP forwards This is a fun one. Right now, when a client is connecting through a subnet router, here's roughly what happens: 1. The client initiates a connection to an IP address behind a subnet router, and sends a TCP SYN 2. The subnet router gets the SYN packet from netstack, and after running through acceptTCP, starts DialContext-ing the destination IP, without accepting the connection¹ 3. The client retransmits the SYN packet a few times while the dial is in progress, until either... 4. The subnet router successfully establishes a connection to the destination IP and sends the SYN-ACK back to the client, or... 5. The subnet router times out and sends a RST to the client. 6. If the connection was successful, the client ACKs the SYN-ACK it received, and traffic starts flowing As a result, the notification code in forwardTCP never notices when a new connection attempt is aborted, and it will wait until either the connection is established, or until the OS-level connection timeout is reached and it aborts. To mitigate this, add a per-client limit on how many in-flight TCP forwarding connections can be in-progress; after this, clients will see a similar behaviour to the global limit, where new connection attempts are aborted instead of waiting. This prevents a single misbehaving client from blocking all other clients of a subnet router by ensuring that it doesn't starve the global limiter. Also, bump the global limit again to a higher value. ¹ We can't accept the connection before establishing a connection to the remote server since otherwise we'd be opening the connection and then immediately closing it, which breaks a bunch of stuff; see #5503 for more details. Updates tailscale/corp#12184 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I76e7008ddd497303d75d473f534e32309c8a5144	9 months ago
Brad Fitzpatrick	1cf85822d0	ipn/ipnstate, wgengine/wgint: add handshake attempts accessors Not yet used. This is being made available so magicsock/wgengine can use it to ignore certain sends (UDP + DERP) later on at least mobile, letting wireguard-go think it's doing its full attempt schedule, but we can cut it short conditionally based on what we know from the control plane. Updates #7617 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com> Change-Id: Ia367cf6bd87b2aeedd3c6f4989528acdb6773ca7	9 months ago
Brad Fitzpatrick	eb28818403	wgengine: make pendOpen time later, after dup check Otherwise on OS retransmits, we'd make redundant timers in Go's timer heap that upon firing just do nothing (well, grab a mutex and check a map and see that there's nothing to do). Updates #cleanup Change-Id: Id30b8b2d629cf9c7f8133a3f7eca5dc79e81facb Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	9 months ago
Brad Fitzpatrick	219efebad4	wgengine: reduce critical section No need to hold wgLock while using the device to LookupPeer; that has its own mutex already. Updates #cleanup Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com> Change-Id: Ib56049fcc7163cf5a2c2e7e12916f07b4f9d67cb	9 months ago
Nick Khyl	7ef1fb113d	cmd/tailscaled, ipn/ipnlocal, wgengine: shutdown tailscaled if wgdevice is closed Tailscaled becomes inoperative if the Tailscale Tunnel wintun adapter is abruptly removed. wireguard-go closes the device in case of a read error, but tailscaled keeps running. This adds detection of a closed WireGuard device, triggering a graceful shutdown of tailscaled. It is then restarted by the tailscaled watchdog service process. Fixes #11222 Signed-off-by: Nick Khyl <nickk@tailscale.com>	9 months ago
Anton Tolchanov	cd9cf93de6	wgengine/netstack: expose TCP forwarder drops via clientmetrics - add a clientmetric with a counter of TCP forwarder drops due to the max attempts; - fix varz metric types, as they are all counters. Updates #8210 Signed-off-by: Anton Tolchanov <anton@tailscale.com>	9 months ago
Brad Fitzpatrick	e1bd7488d0	all: remove LenIter, use Go 1.22 range-over-int instead Updates #11058 Updates golang/go#65685 Change-Id: Ibb216b346e511d486271ab3d84e4546c521e4e22 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	9 months ago
Brad Fitzpatrick	6ad6d6b252	wgengine/wglog: add TS_DEBUG_RAW_WGLOG envknob for raw wg logs Updates #7617 (part of debugging it) Change-Id: I1bcbdcf0f929e3bcf83f244b1033fd438aa6dac1 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	9 months ago
Brad Fitzpatrick	8b9474b06a	wgengine/wgcfg: don't send UAPI to disable keep-alives on new peers That's already the default. Avoid the overhead of writing it on one side and reading it on the other to do nothing. Updates #cleanup (noticed while researching something else) Change-Id: I449c88a022271afb9be5da876bfaf438fe5d3f58 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	9 months ago
James Tucker	131f9094fd	wgengine/wglog: quieten WireGuard logs for allowedips An increasing number of users have very large subnet route configurations, which can produce very large amounts of log data when WireGuard is reconfigured. The logs don't contain the actual routes, so they're largely useless for diagnostics, so we'll just suppress them. Fixes tailscale/corp#17532 Signed-off-by: James Tucker <james@tailscale.com>	9 months ago
Jason Barnett	4d668416b8	wgengine/router: fix ip rule restoration Fixes #10857 Signed-off-by: Jason Barnett <J@sonBarnett.com>	10 months ago
Aaron Klotz	f7acbefbbb	wgengine/router: make the Windows ifconfig implementation reuse existing MibIPforwardRow2 when possible Looking at profiles, we spend a lot of time in winipcfg.LUID.DeleteRoute looking up the routing table entry for the provided RouteData. But we already have the row! We previously obtained that data via the full table dump we did in getInterfaceRoutes. We can make this a lot faster by hanging onto a reference to the wipipcfg.MibIPforwardRow2 and executing the delete operation directly on that. Fixes #11123 Signed-off-by: Aaron Klotz <aaron@tailscale.com>	10 months ago
Percy Wegmann	c42a4e407a	tailfs: listen for local clients only on 100.100.100.100 FileSystemForLocal was listening on the node's Tailscale address, which potentially exposes the user's view of TailFS shares to other Tailnet users. Remote nodes should connect to exported shares via the peerapi. This removes that code so that FileSystemForLocal is only avaialable on 100.100.100.100:8080. Updates tailscale/corp#16827 Signed-off-by: Percy Wegmann <percy@tailscale.com>	10 months ago
Percy Wegmann	ddcffaef7a	tailfs: disable TailFSForLocal via policy Adds support for node attribute tailfs:access. If this attribute is not present, Tailscale will not accept connections to the local TailFS server at 100.100.100.100:8080. Updates tailscale/corp#16827 Signed-off-by: Percy Wegmann <percy@tailscale.com>	10 months ago
Percy Wegmann	abab0d4197	tailfs: clean up naming and package structure - Restyles tailfs -> tailFS - Defines interfaces for main TailFS types - Moves implemenatation of TailFS into tailfsimpl package Updates tailscale/corp#16827 Signed-off-by: Percy Wegmann <percy@tailscale.com>	10 months ago
Percy Wegmann	993acf4475	tailfs: initial implementation Add a WebDAV-based folder sharing mechanism that is exposed to local clients at 100.100.100.100:8080 and to remote peers via a new peerapi endpoint at /v0/tailfs. Add the ability to manage folder sharing via the new 'share' CLI sub-command. Updates tailscale/corp#16827 Signed-off-by: Percy Wegmann <percy@tailscale.com>	10 months ago
Joe Tsai	94a4f701c2	all: use reflect.TypeFor now available in Go 1.22 (#11078 ) Updates #cleanup Signed-off-by: Joe Tsai <joetsai@digital-static.net>	10 months ago
Jordan Whited	8b47322acc	wgengine/magicsock: implement probing of UDP path lifetime (#10844 ) This commit implements probing of UDP path lifetime on the tail end of an active direct connection. Probing configuration has two parts - Cliffs, which are various timeout cliffs of interest, and CycleCanStartEvery, which limits how often a probing cycle can start, per-endpoint. Initially a statically defined default configuration will be used. The default configuration has cliffs of 10s, 30s, and 60s, with a CycleCanStartEvery of 24h. Probing results are communicated via clientmetric counters. Probing is off by default, and can be enabled via control knob. Probing is purely informational and does not yet drive any magicsock behaviors. Updates #540 Signed-off-by: Jordan Whited <jordan@tailscale.com>	10 months ago
James Tucker	7e3bcd297e	go.mod,wgengine/netstack: bump gvisor Updates #8043 Signed-off-by: James Tucker <james@tailscale.com>	11 months ago
Claire Wang	213d696db0	magicsock: mute noisy expected peer mtu related error (#10870 )	11 months ago
Andrew Dunham	7a0392a8a3	wgengine/netstack: expose gVisor metrics through expvar When tailscaled is run with "-debug 127.0.0.1:12345", these metrics are available at: http://localhost:12345/debug/metrics Updates #8210 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I19db6c445ac1f8344df2bc1066a3d9c9030606f8	11 months ago
Andrew Dunham	6540d1f018	wgengine/router: look up absolute path to netsh.exe on Windows This is in response to logs from a customer that show that we're unable to run netsh due to the following error: router: firewall: adding Tailscale-Process rule to allow UDP for "C:\\Program Files\\Tailscale\\tailscaled.exe" ... router: firewall: error adding Tailscale-Process rule: exec: "netsh": cannot run executable found relative to current directory: There's approximately no reason to ever dynamically look up the path of a system utility like netsh.exe, so instead let's first look for it in the System32 directory and only if that fails fall back to the previous behaviour. Updates #10804 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I68cfeb4cab091c79ccff3187d35f50359a690573	11 months ago
Jordan Whited	b084888e4d	wgengine/magicsock: fix typos in docs (#10729 ) Updates #cleanup Signed-off-by: Jordan Whited <jordan@tailscale.com>	11 months ago
Andrew Lytvynov	2716250ee8	all: cleanup unused code, part 2 (#10670 ) And enable U1000 check in staticcheck. Updates #cleanup Signed-off-by: Andrew Lytvynov <awly@tailscale.com>	12 months ago
Andrew Lytvynov	1302bd1181	all: cleanup unused code, part 1 (#10661 ) Run `staticcheck` with `U1000` to find unused code. This cleans up about a half of it. I'll do the other half separately to keep PRs manageable. Updates #cleanup Signed-off-by: Andrew Lytvynov <awly@tailscale.com>	12 months ago

1 2 3 4 5 ...

1485 Commits (170c618483e0166da56692b4c0fdefa14b2ce746)