Commit Graph

126 Commits (15b6969a951b350929bc8b2438e5b6f7daf8b730)

Author SHA1 Message Date
Brad Fitzpatrick 0d0ec7853c cmd/tailscaled: don't require root on darwin with --tun=userspace-networking
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
4 years ago
Brad Fitzpatrick c0cdca6d06 cmd/tailscaled, logtail: share link monitor from wgengine to logtail
Part of overall effort to clean up, unify, use link monitoring more,
and make Tailscale quieter when all networks are down. This is especially
bad on macOS where we can get killed for not being polite it seems.
(But we should be polite in any case)

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
4 years ago
David Anderson 793cb131f0 wgengine/router: toggle killswitch when using default routes on windows.
Fixes #1398.

Signed-off-by: David Anderson <danderson@tailscale.com>
4 years ago
Brad Fitzpatrick 9df4185c94 control/controlclient, net/{dnscache,dnsfallback}: add DNS fallback mechanism
Updates #1405
Updates #1403

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
4 years ago
Brad Fitzpatrick e3df29d488 wgengine{,/monitor}: move interface state fetching/comparing to monitor
Gets it out of wgengine so the Engine isn't responsible for being a
callback registration hub for it.

This also removes the Engine.LinkChange method, as it's no longer
necessary.  The monitor tells us about changes; it doesn't seem to
need any help. (Currently it was only used by Swift, but as of
14dc790137 we just do the same from Go)

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
4 years ago
Brad Fitzpatrick 38dc6fe758 cmd/tailscaled, wgengine: remove --fake, replace with netstack
And add a --socks5-server flag.

And fix a race in SOCKS5 replies where the response header was written
concurrently with the copy from the backend.

Co-authored with Naman Sood.

Updates #707
Updates #504

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
4 years ago
Brad Fitzpatrick ee6475a44d wgengine: unify NewUserspaceEngine, NewUserspaceEngineAdvanced
Also rename EngineConfig to Config to avoid wgengine.EngineConfig
stutter.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
4 years ago
Brad Fitzpatrick dda03a911e wgengine/monitor: change API to permit multiple independent callbakcks
Currently it assumes exactly 1 registered callback. This changes it to
support 0, 1, or more than 1.

This is a step towards plumbing wgengine/monitor into more places (and
moving some of wgengine's interface state fetching into monitor in a
later step)

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
4 years ago
Naman Sood fec9dcbda1 wgengine/netstack: start SOCKS5 server in netstack mode
Updates #707
Updates #504

Signed-off-by: Naman Sood <mail@nsood.in>
4 years ago
Brad Fitzpatrick 3fd00c4a40 cmd/tailscaled: create /usr/local/bin on macOS install-system-daemon if needed
Fixes #1400

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
4 years ago
Naman Sood 517c90d7e5
wgengine, cmd/tailscaled: refactor netstack, forward TCP to hello as demo (#1301)
Updates #707
Updates #504

Signed-off-by: Naman Sood <mail@nsood.in>
4 years ago
Brad Fitzpatrick c64bd587ae net/portmapper: add NAT-PMP client, move port mapping service probing
* move probing out of netcheck into new net/portmapper package
* use PCP ANNOUNCE op codes for PCP discovery, rather than causing
  short-lived (sub-second) side effects with a 1-second-expiring map +
  delete.
* track when we heard things from the router so we can be less wasteful
  in querying the router's port mapping services in the future
* use portmapper from magicsock to map a public port

Fixes #1298
Fixes #1080
Fixes #1001
Updates #864

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
4 years ago
Matt Layher 2c500cee23 go.mod: bump github.com/mdlayher/netlink, github.com/jsimonetti/rtnetlink
Signed-off-by: Matt Layher <mdlayher@gmail.com>
4 years ago
Brad Fitzpatrick 86d3a6c9a6 Switch to Go 1.16.
Fixes #1370

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
4 years ago
Brad Fitzpatrick fd8e070d01 health, control/controlclient, wgengine: report when router unhealthy
Updates tailscale/corp#1338

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
4 years ago
Brad Fitzpatrick 38629b62fc cmd/tailscaled: on darwin, fail early if not root with nicer message
Don't do it on all platforms, as Linux folk might be playing
container + capability games.
4 years ago
Brad Fitzpatrick d3efe8caf6 safesocket, ipn/ipnserver: look up peer creds on Darwin
And open up socket permissions like Linux, now that we know who
connections are from.

This uses the new inet.af/peercred that supports Linux and Darwin at
the moment.

Fixes #1347
Fixes #1348

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
4 years ago
Brad Fitzpatrick fdac0387a7 ipn/ipnserver, ipn/ipnlocal: move whois handler to new localapi package 4 years ago
Brad Fitzpatrick d7569863b5 cmd/tailscaled: fix up install-system-daemon on darwin, add uninstall too
Tangentially related to #987, #177, #594, #925, #505
4 years ago
Brad Fitzpatrick 52e24aa966 net/{interfaces,ns}: add tailscaled-mode darwin routing looping prevention
Fixes #1331

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
4 years ago
Brad Fitzpatrick 29b028b9c4 cmd/tailscaled: add subcommand on darwin to install+start tailscaled under launchd
Tangentially related to #987, #177, #594, #925.
4 years ago
Brad Fitzpatrick 6680976b50 cmd/tailscaled: pick automatic tun device name on darwin 4 years ago
Brad Fitzpatrick 1e7a35b225 types/netmap: split controlclient.NetworkMap off into its own leaf package
Updates #1278

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
4 years ago
Brad Fitzpatrick ddfcc4326c types/persist: split controlclient.Persist into a small leaf package
This one alone doesn't modify the global dependency map much
(depaware.txt if anything looks slightly worse), but it leave
controlclient as only containing NetworkMap:

bradfitz@tsdev:~/src/tailscale.com/ipn$ grep -F "controlclient." *.go
backend.go:     NetMap        *controlclient.NetworkMap // new netmap received
fake_test.go:   b.notify(Notify{NetMap: &controlclient.NetworkMap{}})
fake_test.go:   b.notify(Notify{NetMap: &controlclient.NetworkMap{}})
handle.go:      netmapCache       *controlclient.NetworkMap
handle.go:func (h *Handle) NetMap() *controlclient.NetworkMap {

Once that goes into a leaf package, then ipn doesn't depend on
controlclient at all, and then the client gets smaller.

Updates #1278
4 years ago
Brad Fitzpatrick 6064b6ff47 wgengine/wgcfg/nmcfg: split control/controlclient/netmap.go into own package
It couldn't move to ipnlocal due to test dependency cycles.

Updates #1278

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
4 years ago
Brad Fitzpatrick fb6b0e247c cmd/tailscaled: rename Windows service to just Tailscale
Updates #1232
4 years ago
Brad Fitzpatrick a7562be5e1 cmd/tailscaled: move more of the Windows server setup code into tailscaled
Updates #1232
4 years ago
Brad Fitzpatrick 6f7974b7f2 cmd/tailscaled: add missing depaware.txt update 4 years ago
Brad Fitzpatrick 6099ecf7f4 cmd/tailscaled: run as a service on Windows
Updates #1232
4 years ago
Josh Bleecher Snyder aa6856a9eb wgengine: adapt to wireguard-go changes
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
4 years ago
Brad Fitzpatrick d76334d2f0 ipn: split LocalBackend off into new ipn/ipnlocal package
And move a couple other types down into leafier packages.

Now cmd/tailscale doesn't bring in netlink, magicsock, wgengine, etc.

Fixes #1181

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
4 years ago
Brad Fitzpatrick 6254efb9ef cmd/tailscale{,d}: move debug subcommand to tailscaled
Work on reducing the size of the tailscale binary, which is
currently pulling in most of the same code as tailscaled.

Updates #1181
4 years ago
Brad Fitzpatrick 2889fabaef cmd/tailscaled/tailscaled.service: revert recent hardening for now
It broke Debian Stretch. We'll try again later.

Updates #1245

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
4 years ago
Josh Bleecher Snyder fe7c3e9c17 all: move wgcfg from wireguard-go
This is mostly code movement from the wireguard-go repo.

Most of the new wgcfg package corresponds to the wireguard-go wgcfg package.

wgengine/wgcfg/device{_test}.go was device/config{_test}.go.
There were substantive but simple changes to device_test.go to remove
internal package device references.

The API of device.Config (now wgcfg.DeviceConfig) grew an error return;
we previously logged the error and threw it away.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
4 years ago
David Anderson de497358b8 cmd/tailscaled: add /run to the allowed paths for iptables.
Signed-off-by: David Anderson <danderson@tailscale.com>
4 years ago
Sonia Appasamy 567c5a6d9e
tailcfg, controlclient: add DisplayName field to tailcfg.Node and populate it from controlclient (#1191)
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
4 years ago
Brad Fitzpatrick 9ce92aad3e cmd/tailscaled: update depaware.txt 4 years ago
Brad Fitzpatrick eb47cba435 cmd/tailscaled: don't require --state for --cleanup 4 years ago
Josh Bleecher Snyder d5baeeed5c wgengine: use Tailscale-style peer identifiers in logs
Rewrite log lines on the fly, based on the set of known peers.

This enables us to use upstream wireguard-go logging,
but maintain the Tailscale-style peer public key identifiers
that the rest of our systems (and people) expect.

Fixes #1183

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
4 years ago
Brad Fitzpatrick 9541886856 wgengine/magicsock: disable regular STUNs for all platforms by default
Reduces background CPU & network.

Updates #1034

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
4 years ago
Josh Bleecher Snyder 654b5f1570 all: convert from []wgcfg.Endpoint to string
This eliminates a dependency on wgcfg.Endpoint,
as part of the effort to eliminate our wireguard-go fork.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
4 years ago
David Anderson 9abcb18061 wgengine/magicsock: import more of wireguard-go, update docstrings.
Signed-off-by: David Anderson <danderson@tailscale.com>
4 years ago
David Anderson 22507adf54 wgengine/magicsock: stop depending on UpdateDst in legacy codepaths.
This makes connectivity between ancient and new tailscale nodes slightly
worse in some cases, but only in cases where the ancient version would
likely have failed to get connectivity anyway.

Signed-off-by: David Anderson <danderson@tailscale.com>
4 years ago
Brad Fitzpatrick 85e54af0d7 wgengine: on TCP connect fail/timeout, log some clues about why it failed
So users can see why things aren't working.

A start. More diagnostics coming.

Updates #1094
4 years ago
Brad Fitzpatrick f85769b1ed wgengine/magicsock: drop netaddr.IPPort cache
netaddr.IP no longer allocates, so don't need a cache or all its associated
code/complexity.

This totally removes groupcache/lru from the deps.

Also go mod tidy.
4 years ago
Brad Fitzpatrick a80446c026 Update depaware (removes lru from wgengine/filter) 4 years ago
Naman Sood f69e46175d
wengine/netstack: bump gvisor to latest version
* wengine/netstack: bump gvisor to latest version

Signed-off-by: Naman Sood <naman@tailscale.com>

* update dependencies

Signed-off-by: Naman Sood <naman@tailscale.com>

* Don't change hardcoded IP

Signed-off-by: Naman Sood <naman@tailscale.com>
4 years ago
Brad Fitzpatrick 5aa5db89d6 cmd/tailscaled, wgengine/netstack: add start of gvisor userspace netstack work
Not usefully functional yet (mostly a proof of concept), but getting
it submitted for some work @namansood is going to do atop this.

Updates #707
Updates #634
Updates #48
Updates #835
4 years ago
Brad Fitzpatrick 5efb0a8bca cmd/tailscale: change formatting of "tailscale status"
* show DNS name over hostname, removing domain's common MagicDNS suffix.
  only show hostname if there's no DNS name.
  but still show shared devices' MagicDNS FQDN.

* remove nerdy low-level details by default: endpoints, DERP relay,
  public key.  They're available in JSON mode still for those who need
  them.

* only show endpoint or DERP relay when it's active with the goal of
  making debugging easier. (so it's easier for users to understand
  what's happening) The asterisks are gone.

* remove Tx/Rx numbers by default for idle peers; only show them when
  there's traffic.

* include peers' owner login names

* add CLI option to not show peers (matching --self=true, --peers= also
  defaults to true)

* sort by DNS/host name, not public key

* reorder columns
4 years ago
Josh Bleecher Snyder 1271e135cd wgengine/tstun: initialize wireguard-go TUN parameters
This will enable us to remove the corresponding code from
our fork of wireguard-go.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
4 years ago