Commit Graph

16 Commits (1384c24e41fbf820418172b6a8c9a45c64a6511b)

Author SHA1 Message Date
Brad Fitzpatrick 7f587d0321 health, wgengine/magicsock: remove last of health package globals
Fixes #11874
Updates #4136

Change-Id: Ib70e6831d4c19c32509fe3d7eee4aa0e9f233564
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
7 months ago
Brad Fitzpatrick 6d69fc137f ipn/{ipnlocal,localapi},wgengine{,/magicsock}: plumb health.Tracker
Down to 25 health.Global users. After this remains controlclient &
net/dns & wgengine/router.

Updates #11874
Updates #4136

Change-Id: I6dd1856e3d9bf523bdd44b60fb3b8f7501d5dc0d
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
7 months ago
Brad Fitzpatrick 723c775dbb tsd, ipnlocal, etc: add tsd.System.HealthTracker, start some plumbing
This adds a health.Tracker to tsd.System, accessible via
a new tsd.System.HealthTracker method.

In the future, that new method will return a tsd.System-specific
HealthTracker, so multiple tsnet.Servers in the same process are
isolated. For now, though, it just always returns the temporary
health.Global value. That permits incremental plumbing over a number
of changes. When the second to last health.Global reference is gone,
then the tsd.System.HealthTracker implementation can return a private
Tracker.

The primary plumbing this does is adding it to LocalBackend and its
dozen and change health calls. A few misc other callers are also
plumbed. Subsequent changes will flesh out other parts of the tree
(magicsock, controlclient, etc).

Updates #11874
Updates #4136

Change-Id: Id51e73cfc8a39110425b6dc19d18b3975eac75ce
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
7 months ago
Brad Fitzpatrick ebc552d2e0 health: add Tracker type, in prep for removing global variables
This moves most of the health package global variables to a new
`health.Tracker` type.

But then rather than plumbing the Tracker in tsd.System everywhere,
this only goes halfway and makes one new global Tracker
(`health.Global`) that all the existing callers now use.

A future change will eliminate that global.

Updates #11874
Updates #4136

Change-Id: I6ee27e0b2e35f68cb38fecdb3b2dc4c3f2e09d68
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
7 months ago
James Tucker 6e334e64a1 net/netcheck,wgengine/magicsock: align DERP frame receive time heuristics
The netcheck package and the magicksock package coordinate via the
health package, but both sides have time based heuristics through
indirect dependencies. These were misaligned, so the implemented
heuristic aimed at reducing DERP moves while there is active traffic
were non-operational about 3/5ths of the time.

It is problematic to setup a good test for this integration presently,
so instead I added comment breadcrumbs along with the initial fix.

Updates #8603

Signed-off-by: James Tucker <james@tailscale.com>
8 months ago
Brad Fitzpatrick a36cfb4d3d tailcfg, ipn/ipnlocal, wgengine/magicsock: add only-tcp-443 node attr
Updates tailscale/corp#17879

Change-Id: I0dc305d147b76c409cf729b599a94fa723aef0e0
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
8 months ago
Andrew Dunham f072d017bd wgengine/magicsock: don't change DERP home when not connected to control
This pretty much always results in an outage because peers won't
discover our new home region and thus won't be able to establish
connectivity.

Updates tailscale/corp#18095

Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Ic0d09133f198b528dd40c6383b16d7663d9d37a7
9 months ago
Jordan Whited 8b47322acc
wgengine/magicsock: implement probing of UDP path lifetime (#10844)
This commit implements probing of UDP path lifetime on the tail end of
an active direct connection. Probing configuration has two parts -
Cliffs, which are various timeout cliffs of interest, and
CycleCanStartEvery, which limits how often a probing cycle can start,
per-endpoint. Initially a statically defined default configuration will
be used. The default configuration has cliffs of 10s, 30s, and 60s,
with a CycleCanStartEvery of 24h. Probing results are communicated via
clientmetric counters. Probing is off by default, and can be enabled
via control knob. Probing is purely informational and does not yet
drive any magicsock behaviors.

Updates #540

Signed-off-by: Jordan Whited <jordan@tailscale.com>
10 months ago
Jordan Whited 685b853763
wgengine/magicsock: fix handling of derp.PeerGoneMessage (#10589)
The switch in Conn.runDerpReader() on the derp.ReceivedMessage type
contained cases other than derp.ReceivedPacket that fell through to
writing to c.derpRecvCh, which should only be reached for
derp.ReceivedPacket. This can result in the last/previous
derp.ReceivedPacket to be re-handled, effectively creating a duplicate
packet. If the last derp.ReceivedPacket happens to be a
disco.CallMeMaybe it may result in a disco ping scan towards the
originating peer on the endpoints contained.

The change in this commit moves the channel write on c.derpRecvCh and
subsequent select awaiting the result into the derp.ReceivedMessage
case, preventing it from being reached from any other case. Explicit
continue statements are also added to non-derp.ReceivedPacket cases
where they were missing, in order to signal intent to the reader.

Fixes #10586

Signed-off-by: Jordan Whited <jordan@tailscale.com>
11 months ago
Brad Fitzpatrick 4d196c12d9 health: don't report a warning in DERP homeless mode
Updates #3363
Updates tailscale/corp#396

Change-Id: Ibfb0496821cb58a78399feb88d4206d81e95ca0f
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
1 year ago
Brad Fitzpatrick 3bd382f369 wgengine/magicsock: add DERP homeless debug mode for testing
In DERP homeless mode, a DERP home connection is not sought or
maintained and the local node is not reachable.

Updates #3363
Updates tailscale/corp#396

Change-Id: Ibc30488ac2e3cfe4810733b96c2c9f10a51b8331
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
1 year ago
Brad Fitzpatrick 4e91cf20a8 control/controlknobs, all: add plumbed Knobs type, not global variables
Previously two tsnet nodes in the same process couldn't have disjoint
sets of controlknob settings from control as both would overwrite each
other's global variables.

This plumbs a new controlknobs.Knobs type around everywhere and hangs
the knobs sent by control on that instead.

Updates #9351

Change-Id: I75338646d36813ed971b4ffad6f9a8b41ec91560
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
1 year ago
James Tucker e1c7e9b736 wgengine/magicsock: improve endpoint selection for WireGuard peers with rx time
If we don't have the ICMP hint available, such as on Android, we can use
the signal of rx traffic to bias toward a particular endpoint.

We don't want to stick to a particular endpoint for a very long time
without any signals, so the sticky time is reduced to 1 second, which is
large enough to avoid excessive packet reordering in the common case,
but should be small enough that either rx provides a strong signal, or
we rotate in a user-interactive schedule to another endpoint, improving
the feel of failover to other endpoints.

Updates #8999

Co-authored-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>

Signed-off-by: James Tucker <james@tailscale.com>
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
1 year ago
Brad Fitzpatrick 25663b1307 tailcfg: remove most Debug fields, move bulk to nodeAttrs [capver 70]
Now a nodeAttr: ForceBackgroundSTUN, DERPRoute, TrimWGConfig,
DisableSubnetsIfPAC, DisableUPnP.

Kept support for, but also now a NodeAttr: RandomizeClientPort.

Removed: SetForceBackgroundSTUN, SetRandomizeClientPort (both never
used, sadly... never got around to them. But nodeAttrs are better
anyway), EnableSilentDisco (will be a nodeAttr later when that effort
resumes).

Updates #8923

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
1 year ago
Brad Fitzpatrick 92fc9a01fa cmd/tailscale: add debug commands to break connections
For testing reconnects.

Updates tailscale/corp#5761

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
1 year ago
David Anderson 84777354a0 wgengine/magicsock: factor out more separable parts
Updates #8720

Signed-off-by: David Anderson <danderson@tailscale.com>
1 year ago