tailscale

Commit Graph

Author	SHA1	Message	Date
Brad Fitzpatrick	3a168cc1ff	wgengine/magicsock: ignore pre-disco (pre-0.100) peers There aren't any in the wild, other than one we ran on purpose to keep us honest, but we can bump that one forward to 0.100. Change-Id: I129e70724b2d3f8edf3b496dc01eba3ac5a2a907 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
phirework	a011320370	magicsock: cleanup canp2p (#6391 ) This renames canP2P in magicsock to canP2PLocked to reflect expectation of mutex lock, fixes a race we discovered in the meantime, and updates the current stats. Co-authored-by: Brad Fitzpatrick <bradfitz@tailscale.com> Signed-off-by: Jenny Zhang <jz@tailscale.com>	2 years ago
Brad Fitzpatrick	da8def8e13	all: remove old +build tags The //go:build syntax was introduced in Go 1.17: https://go.dev/doc/go1.17#build-lines gofmt has kept the +build and go:build lines in sync since then, but enough time has passed. Time to remove them. Done with: perl -i -npe 's,^// \+build.*\n,,' $(git grep -l -F '+build') Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Joe Tsai	81fd259133	wgengine/magicsock: gather physical-layer statistics (#5925 ) There is utility in logging traffic statistics that occurs at the physical layer. That is, in order to send packets virtually to a particular tailscale IP address, what physical endpoints did we need to communicate with? This functionality logs IP addresses identical to what had always been logged in magicsock prior to #5823, so there is no increase in PII being logged. ExtractStatistics returns a mapping of connections to counts. The source is always a Tailscale IP address (without port), while the destination is some endpoint reachable on WAN or LAN. As a special case, traffic routed through DERP will use 127.3.3.40 as the destination address with the port being the DERP region. This entire feature is only enabled if data-plane audit logging is enabled on the tailnet (by default it is disabled). Example of type of information logged: ------------------------------------ Tx[P/s] Tx[B/s] Rx[P/s] Rx[B/s] PhysicalTraffic: 25.80 3.39Ki 38.80 5.57Ki 100.1.2.3 -> 143.11.22.33:41641 15.40 2.00Ki 23.20 3.37Ki 100.4.5.6 -> 192.168.0.100:41641 10.20 1.38Ki 15.60 2.20Ki 100.7.8.9 -> 127.3.3.40:2 0.20 6.40 0.00 0.00 Signed-off-by: Joe Tsai <joetsai@digital-static.net>	2 years ago
Andrew Dunham	74693793be	net/netcheck, tailcfg: track whether OS supports IPv6 We had previously added this to the netcheck report in #5087 but never copied it into the NetInfo struct. Additionally, add it to log lines so it's visible to support. Change-Id: Ib6266f7c6aeb2eb2a28922aeafd950fe1bf5627e Signed-off-by: Andrew Dunham <andrew@tailscale.com>	2 years ago
phirework	d13c9cdfb4	wgengine/magicsock: set up pathfinder (#5994 ) Sets up new file for separate silent disco goroutine, tentatively named pathfinder for now. Updates #540 Co-authored-by: Brad Fitzpatrick <bradfitz@tailscale.com> Signed-off-by: Jenny Zhang <jz@tailscale.com>	2 years ago
Brad Fitzpatrick	deac82231c	wgengine/magicsock: add start of alternate send path During development of silent disco (#540), an alternate send policy for magicsock that doesn't wake up the radio frequently with heartbeats, we want the old & new policies to coexist, like we did previously pre- and post-disco. We started to do that earlier in `5c42990c2f` but only set up the env+control knob plumbing to set a bool about which path should be used. This starts to add a way for the silent disco code to update the send path from a separate goroutine. (Part of the effort is going to de-state-machinify the event based soup that is the current disco code and make it more Go synchronous style.) So far this does nothing. (It does add an atomic load on each send but that should be noise in the grand scheme of things, and a even more rare atomic store of nil on node config changes.) Baby steps. Updates #540 Co-authored-by: Jenny Zhang <jz@tailscale.com> Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Joe Tsai	14100c0985	wgengine/magicsock: restore allocation-free endpoint.DstToString (#5971 ) The wireguard-go code unfortunately calls this unconditionally even when verbose logging is disabled. Partial revert of #5911. Signed-off-by: Joe Tsai <joetsai@digital-static.net>	2 years ago
Joe Tsai	9ee3df02ee	wgengine/magicsock: remove endpoint.wgEndpoint (#5911 ) This field seems seldom used and the documentation is wrong. It is simpler to just derive its original value dynamically when endpoint.DstToString is called. This method is potentially used by wireguard-go, but not in any code path is performance sensitive. All calls to it use it in conjunction with fmt.Printf, which is going to be slow anyways since it uses Go reflection. Signed-off-by: Joe Tsai <joetsai@digital-static.net>	2 years ago
James Tucker	539c073cf0	wgengine/magicsock: set UDP socket buffer sizes to 7MB - At high data rates more buffer space is required in order to avoid packet loss during any cause of delay. - On slower machines more buffer space is required in order to avoid packet loss while decryption & tun writing is underway. - On higher latency network paths more buffer space is required in order to overcome BDP. - On Linux set with SO_*BUFFORCE to bypass net.core.{r,w}mem_max. - 7MB is the current default maximum on macOS 12.6 - Windows test is omitted, as Windows does not support getsockopt for these options. Signed-off-by: James Tucker <james@tailscale.com>	2 years ago
Brad Fitzpatrick	1841d0bf98	wgengine/magicsock: make debug-level stuff not logged by default And add a CLI/localapi and c2n mechanism to enable it for a fixed amount of time. Updates #1548 Change-Id: I71674aaf959a9c6761ff33bbf4a417ffd42195a7 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Josh Soref	d4811f11a0	all: fix spelling mistakes Signed-off-by: Josh Soref <2119212+jsoref@users.noreply.github.com>	2 years ago
Kyle Carberry	91794f6498	wgengine/magicsock: move firstDerp check after nil derpMap check This fixes a race condition which caused `c.muCond.Broadcast()` to never fire in the `firstDerp` if block. It resulted in `Close()` hanging forever. Signed-off-by: Kyle Carberry <kyle@carberry.com>	2 years ago
Brad Fitzpatrick	832031d54b	wgengine/magicsock: fix recently introduced data race From `5c42990c2f`, not yet released in a stable build. Caught by existing tests. Fixes #5685 Change-Id: Ia76bb328809d9644e8b96910767facf627830600 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
phirework	5c42990c2f	wgengine/magicsock: add client flag and envknob to disable heartbeat (#5638 ) Baby steps towards turning off heartbeat pings entirely as per #540. This doesn't change any current magicsock functionality and requires additional changes to send/disco paths before the flag can be turned on. Updates #540 Change-Id: Idc9a72748e74145b068d67e6dd4a4ffe3932efd0 Signed-off-by: Jenny Zhang <jz@tailscale.com> Signed-off-by: Jenny Zhang <jz@tailscale.com>	2 years ago
Eng Zer Jun	f0347e841f	refactor: move from io/ioutil to io and os packages The io/ioutil package has been deprecated as of Go 1.16 [1]. This commit replaces the existing io/ioutil functions with their new definitions in io and os packages. Reference: https://golang.org/doc/go1.16#ioutil Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>	2 years ago
Brad Fitzpatrick	74674b110d	envknob: support changing envknobs post-init Updates #5114 Change-Id: Ia423fc7486e1b3f3180a26308278be0086fae49b Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
David Anderson	7c49db02a2	wgengine/magicsock: don't use BPF receive when SO_MARK doesn't work. Fixes #5607 Signed-off-by: David Anderson <danderson@tailscale.com>	2 years ago
Colin Adler	9c8bbc7888	wgengine/magicsock: fix panic in http debug server Fixes an panic in `(*magicsock.Conn).ServeHTTPDebug` when the `recentPongs` ring buffer for an endpoint wraps around. Signed-off-by: Colin Adler <colin1adler@gmail.com>	2 years ago
James Tucker	672c2c8de8	wgengine/magicsock: add filter to ignore disco to old/other ports Incoming disco packets are now dropped unless they match one of the current bound ports, or have a zero port. The BPF filter passes all packets with a disco header to the raw packet sockets regardless of destination port (in order to avoid needing to reconfigure BPF on rebind). If a BPF enabled node has just rebound, due to restart or rebind, it may receive and reply to disco ping packets destined for ports other than those which are presently bound. If the pong is accepted, the pinging node will now assume that it can send WireGuard traffic to the pinged port - such traffic will not reach the node as it is not destined for a bound port. The zero port is ignored, if received. This is a speculative defense and would indicate a problem in the receive path, or the BPF filter. This condition is allowed to pass as it may enable traffic to flow, however it will also enable problems with the same symptoms this patch otherwise fixes. Fixes #5536 Signed-off-by: James Tucker <james@tailscale.com>	2 years ago
James Tucker	be140add75	wgengine/magicsock: fix regression in initial bind for js `1f959edeb0` introduced a regression for JS where the initial bind no longer occurred at all for JS. The condition is moved deeper in the call tree to avoid proliferation of higher level conditions. Updates #5537 Signed-off-by: James Tucker <james@tailscale.com>	2 years ago
James Tucker	1f959edeb0	wgengine/magicksock: remove nullability of RebindingUDPConns Both RebindingUDPConns now always exist. the initial bind (which now just calls rebind) now ensures that bind is called for both, such that they both at least contain a blockForeverConn. Calling code no longer needs to assert their state. Signed-off-by: James Tucker <james@tailscale.com>	2 years ago
Brad Fitzpatrick	e470893ba0	wgengine/magicsock: use mak in another spot Change-Id: I0a46d6243371ae6d126005a2bd63820cb2d1db6b Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Andrew Dunham	c72caa6672	wgengine/magicsock: use AF_PACKET socket + BPF to read disco messages This is entirely optional (i.e. failing in this code is non-fatal) and only enabled on Linux for now. Additionally, this new behaviour can be disabled by setting the TS_DEBUG_DISABLE_AF_PACKET environment variable. Updates #3824 Replaces #5474 Co-authored-by: Andrew Dunham <andrew@du.nham.ca> Signed-off-by: David Anderson <danderson@tailscale.com>	2 years ago
Andrew Dunham	e945d87d76	util/uniq: use generics instead of reflect (#5491 ) This takes 75% less time per operation per some benchmarks on my mac. Signed-off-by: Andrew Dunham <andrew@du.nham.ca>	2 years ago
Kris Brandow	5d559141d5	wgengine/magicsock: remove mention of Start The Start method was removed in `4c27e2fa22`, but the comment on NewConn still mentioned it doesn't do anything until this method is called. Signed-off-by: Kris Brandow <kris.brandow@gmail.com>	2 years ago
Andrew Dunham	f0d6f173c9	net/netcheck: try ICMP if UDP is blocked (#5056 ) Signed-off-by: Andrew Dunham <andrew@du.nham.ca>	2 years ago
Maisem Ali	a9f6cd41fd	all: use syncs.AtomicValue Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Brad Fitzpatrick	4950fe60bd	syncs, all: move to using Go's new atomic types instead of ours Fixes #5185 Change-Id: I850dd532559af78c3895e2924f8237ccc328449d Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Maisem Ali	9bb5a038e5	all: use atomic.Pointer Also add some missing docs. Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Brad Fitzpatrick	5381437664	logtail, net/portmapper, wgengine/magicsock: use fmt.Appendf Fixes #5206 Change-Id: I490bb92e774ce7c044040537e2cd864fcf1dbe5a Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	5f6abcfa6f	all: migrate code from netaddr.FromStdAddr to Go 1.18 With caveat https://github.com/golang/go/issues/53607#issuecomment-1203466984 that then requires a new wrapper. But a simpler one at least. Updates #5162 Change-Id: I0a5265065bfcd7f21e8dd65b2bd74cae90d76090 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	8725b14056	all: migrate more code code to net/netip directly Instead of going through the tailscale.com/net/netaddr transitional wrappers. Updates #5162 Change-Id: I3dafd1c2effa1a6caa9b7151ecf6edd1a3fda3dd Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	fb82299f5a	wgengine/magicsock: avoid RebindingUDPConn mutex in common read/write case Change-Id: I209fac567326f2e926bace2582dbc67a8bc94c78 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	116f55ff66	all: gofmt for Go 1.19 Updates #5210 Change-Id: Ib02cd5e43d0a8db60c1f09755a8ac7b140b670be Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	a12aad6b47	all: convert more code to use net/netip directly perl -i -npe 's,netaddr.IPPrefixFrom,netip.PrefixFrom,' $(git grep -l -F netaddr.) perl -i -npe 's,netaddr.IPPortFrom,netip.AddrPortFrom,' $(git grep -l -F netaddr. ) perl -i -npe 's,netaddr.IPPrefix,netip.Prefix,g' $(git grep -l -F netaddr. ) perl -i -npe 's,netaddr.IPPort,netip.AddrPort,g' $(git grep -l -F netaddr. ) perl -i -npe 's,netaddr.IP\b,netip.Addr,g' $(git grep -l -F netaddr. ) perl -i -npe 's,netaddr.IPv6Raw\b,netip.AddrFrom16,g' $(git grep -l -F netaddr. ) goimports -w . Then delete some stuff from the net/netaddr shim package which is no longer neeed. Updates #5162 Change-Id: Ia7a86893fe21c7e3ee1ec823e8aba288d4566cd8 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	6a396731eb	all: use various net/netip parse funcs directly Mechanical change with perl+goimports. Changed {Must,}Parse{IP,IPPrefix,IPPort} to their netip variants, then goimports -d . Finally, removed the net/netaddr wrappers, to prevent future use. Updates #5162 Change-Id: I59c0e38b5fbca5a935d701645789cddf3d7863ad Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	7eaf5e509f	net/netaddr: start migrating to net/netip via new netaddr adapter package Updates #5162 Change-Id: Id7bdec303b25471f69d542f8ce43805328d56c12 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	d8cb5aae17	tailcfg, control/controlclient: add tailcfg.PeersChangedPatch [capver 33] This adds a lighter mechanism for endpoint updates from control. Change-Id: If169c26becb76d683e9877dc48cfb35f90cc5f24 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Mihai Parparita	27a1ad6a70	wasm: exclude code that's not used on iOS for Wasm too It has similar size constraints. Saves ~1.9MB from the Wasm build. Updates #3157 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	2 years ago
Mihai Parparita	561f7be434	wgengine/magicsock: remove unused metric We don't increment the metricRecvData anywhere, just the per-protocol ones. Signed-off-by: Mihai Parparita <mihai@tailscale.com>	3 years ago
James Tucker	f9e86e64b7	*: use WireGuard where logged, printed or named Signed-off-by: James Tucker <james@tailscale.com>	3 years ago
Maisem Ali	2265587d38	wgengine/{,magicsock}: add metrics for rebinds and restuns Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Brad Fitzpatrick	910ae68e0b	util/mak: move tailssh's mapSet into a new package for reuse elsewhere Change-Id: Idfe95db82275fd2be6ca88f245830731a0d5aecf Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	f2041c9088	all: use strings.Cut even more Change-Id: I943ce72c6f339589235bddbe10d07799c4e37979 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Josh Bleecher Snyder	0868329936	all: use any instead of interface{} My favorite part of generics. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Josh Bleecher Snyder	5f176f24db	go.mod: upgrade to the latest wireguard-go This pulls in a handful of fixes and an update to Go 1.18. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Josh Bleecher Snyder	1b57b0380d	wgengine/magicsock: remove final alloc from ReceiveFrom And now that we don't have to play escape analysis and inlining games, simplify the code. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Josh Bleecher Snyder	08cf54f386	wgengine/magicsock: fix goMajorVersion for 1.18 ts release The version string changed slightly. Adapt. And always check the current Go version to prevent future accidental regressions. I would have missed this one had I not explicitly manually checked it. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Maisem Ali	72d8672ef7	tailcfg: make Node.Hostinfo a HostinfoView Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago

1 2 3 4 5 ...

539 Commits (109aa3b2fb5020bdc60e9c0991b9d6f0c9ad846e)