154 Commits (0f604923d345fff3334d74e57492bfae98aba935)

Author	SHA1	Message	Date
Mihai Parparita	cb525a1aad	cmd/tailscaled: fix typo in netstack variable name ... Signed-off-by: Mihai Parparita <mihai@tailscale.com>	2 years ago
Maisem Ali	96cad35870	cmd/tailscaled: rename variables to be more descriptive ... renamed from `useNetstack` to `onlyNetstack` which is 1 letter more but more descriptive because we always have netstack enabled and `useNetstack` doesn't convey what it is supposed to be used for. e.g. we always use netstack for Tailscale SSH. Also renamed shouldWrapNetstack to handleSubnetsInNetstack as it was only used to configure subnet routing via netstack. Updates tailscale/corp#8020 Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Brad Fitzpatrick	0a10a5632b	cmd/tailscaled: add TS_DEBUG_BACKEND_DELAY_SEC for testing async startup ... This adds an envknob to make testing async startup more reproducible. We want the Windows GUI to behave well when wintun is not (or it's doing its initial slow driver installation), but during testing it's often too fast to see that it's working. This lets it be slowed down. Updates #6522 Change-Id: I6ae19f46e270ea679cbaea32a53888efcf2943a7 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	3b0de97e07	cmd/tailscaled: unify the two Windows paths + separate IPN server path ... tailscaled on Windows had two entirely separate start-up paths for running as a service vs in the foreground. It's been causing problems for ages. This unifies the two paths, making them be the same as the path used for every other platform. Also, it uses the new async LocalBackend support in ipnserver.Server so the Server can start serving HTTP immediately, even if tun takes awhile to come up. Updates #6535 Change-Id: Icc8c4f96d4887b54a024d7ac15ad11096b5a58cf Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	e8cc78b1af	ipn/ipnserver: change Server to let LocalBackend be supplied async ... This is step 1 of de-special-casing of Windows and letting the LocalAPI HTTP server start serving immediately, even while the rest of the world (notably the Engine and its TUN device) are being created, which can take a few to dozens of seconds on Windows. With this change, the ipnserver.New function changes to not take an Engine and to return immediately, not returning an error, and let its Run run immediately. If its ServeHTTP is called when it doesn't yet have a LocalBackend, it returns an error. A TODO in there shows where a future handler will serve status before an engine is available. Future changes will: * delete a bunch of tailscaled_windows.go code and use this new API * add the ipnserver.Server ServerHTTP handler to await the engine being available * use that handler in the Windows GUI client Updates #6522 Change-Id: Iae94e68c235e850b112a72ea24ad0e0959b568ee Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	4d3713f631	envknob: add GOOS func ... Centralize the fake GOOS stuff, start to use it more. To be used more in the future. Change-Id: Iabacfbeaf5fca0b53bf4d5dbcdc0367f05a205f9 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Maisem Ali	4d330bac14	ipn/ipnlocal: add support for multiple user profiles ... Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Brad Fitzpatrick	da8def8e13	all: remove old +build tags ... The //go:build syntax was introduced in Go 1.17: https://go.dev/doc/go1.17#build-lines gofmt has kept the +build and go:build lines in sync since then, but enough time has passed. Time to remove them. Done with: perl -i -npe 's,^// \+build.*\n,,' $(git grep -l -F '+build') Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Emmanuel T Odeke	680f8d9793	all: fix more resource leaks found by staticmajor ... Updates #5706 Signed-off-by: Emmanuel T Odeke <emmanuel@orijtech.com>	2 years ago
Mihai Parparita	8343b243e7	all: consistently initialize Logf when creating tsdial.Dialers ... Most visible when using tsnet.Server, but could have resulted in dropped messages in a few other places too. Fixes #5743 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	2 years ago
Josh Soref	d4811f11a0	all: fix spelling mistakes ... Signed-off-by: Josh Soref <2119212+jsoref@users.noreply.github.com>	2 years ago
Brad Fitzpatrick	41bb47de0e	cmd/tailscaled: respect $PORT on all platforms, not just Linux ... Updates #5114 Change-Id: I6c6e28c493d6a026a03088157d08f9fd182ef373 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	3562b5bdfa	envknob, health: support Synology, show parse errors in status ... Updates #5114 Change-Id: I8ac7a22a511f5a7d0dcb8cac470d4a403aa8c817 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	65c24b6334	envknob: generalize Windows tailscaled-env.txt support ... ipnserver previously had support for a Windows-only environment variable mechanism that further only worked when Windows was running as a service, not from a console. But we want it to work from tailscaed too, and we want it to work on macOS and Synology. So move it to envknob, now that envknob can change values at runtime post-init. A future change will wire this up for more platforms, and do something more for CLI flags like --port, which the bug was originally about. Updates #5114 Change-Id: I9fd69a9a91bb0f308fc264d4a6c33e0cbe352d71 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	74674b110d	envknob: support changing envknobs post-init ... Updates #5114 Change-Id: Ia423fc7486e1b3f3180a26308278be0086fae49b Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	45a3de14a6	cmd/tailscaled, tailcfg, hostinfo: add flag to disable logging + support ... As noted in #5617, our documented method of blocking log.tailscale.io DNS no longer works due to bootstrap DNS. Instead, provide an explicit flag (--no-logs-no-support) and/or env variable (TS_NO_LOGS_NO_SUPPORT=true) to explicitly disable logcatcher uploads. It also sets a bit on Hostinfo to say that the node is in that mode so we can end any support tickets from such nodes more quickly. This does not yet provide an easy mechanism for users on some platforms (such as Windows, macOS, Synology) to set flags/env. On Linux you'd used /etc/default/tailscaled typically. Making it easier to set flags for other platforms is tracked in #5114. Fixes #5617 Fixes tailscale/corp#1475 Change-Id: I72404e1789f9e56ec47f9b7021b44c025f7a373a Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	766ea96adf	cmd/tailscaled: enable hybrid netstack mode on openbsd too ... Apparently OpenBSD can forward packets with manual configuration, https://github.com/tailscale/tailscale/issues/2498#issuecomment-1114216999 But this makes it work by default. People doing things by hand can set TS_DEBUG_WRAP_NETSTACK=0 in the environment. Change-Id: Iee5f32252f83af2baa0ebbe3f20ce9fec5f29e96 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	e1309e1323	all: require Go 1.19 ... Updates #5210 Change-Id: I2e950b4776636b4ea89b6566b60e4a87596a3a43 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	0a6aa75a2d	cmd/tailscaled: add opt-in support for linking CLI into daemon ... Doesn't help much, though. $ go install --tags=ts_include_cli ./cmd/tailscaled/ $ ls -lh ~/go/bin/tailscaled -rwxr-xr-x 2 bradfitz bradfitz 34M Jul 27 11:00 /home/bradfitz/go/bin/tailscaled $ go install --tags= ./cmd/tailscaled/ $ ls -lh ~/go/bin/tailscaled -rwxr-xr-x 1 bradfitz bradfitz 23M Jul 27 11:00 /home/bradfitz/go/bin/tailscaled $ ls -lh ~/go/bin/tailscale -rwxr-xr-x 1 bradfitz bradfitz 13M Jul 25 21:30 /home/bradfitz/go/bin/tailscale Fixes #2233 Change-Id: I46bae91bb38eb47a76251c1b5c1e9e455fc234b6 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	a12aad6b47	all: convert more code to use net/netip directly ... perl -i -npe 's,netaddr.IPPrefixFrom,netip.PrefixFrom,' $(git grep -l -F netaddr.) perl -i -npe 's,netaddr.IPPortFrom,netip.AddrPortFrom,' $(git grep -l -F netaddr. ) perl -i -npe 's,netaddr.IPPrefix,netip.Prefix,g' $(git grep -l -F netaddr. ) perl -i -npe 's,netaddr.IPPort,netip.AddrPort,g' $(git grep -l -F netaddr. ) perl -i -npe 's,netaddr.IP\b,netip.Addr,g' $(git grep -l -F netaddr. ) perl -i -npe 's,netaddr.IPv6Raw\b,netip.AddrFrom16,g' $(git grep -l -F netaddr. ) goimports -w . Then delete some stuff from the net/netaddr shim package which is no longer neeed. Updates #5162 Change-Id: Ia7a86893fe21c7e3ee1ec823e8aba288d4566cd8 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	7eaf5e509f	net/netaddr: start migrating to net/netip via new netaddr adapter package ... Updates #5162 Change-Id: Id7bdec303b25471f69d542f8ce43805328d56c12 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Maisem Ali	4d0461f721	ipn/ipnlocal: logout ephemeral nodes on shutdown ... Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 years ago
Brad Fitzpatrick	0d52674a84	net/tstun: diagnose /dev/net/tun fd leak, give better failure message ... Updates #5029 Change-Id: Ibee5e0c9076fe764eb5d856d5ef8b09f4d0e2921 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	505ca2750d	cmd/tailscaled: fix Windows "Allow local LAN access" regression ... 3f686688a6 regressed the Windows beFirewallKillswitch code, preventing the /firewall subprocess from running. Fixes tailscale/corp#6063 Change-Id: Ibd105759e5fecfeffc54f587f8ddcd0f1cbc4dca Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
James Tucker	3f686688a6	cmd/tailscaled: fix state path for windows svc ... Signed-off-by: James Tucker <james@tailscale.com>	3 years ago
James Tucker	4bb7440094	cmd/tailscaled: use --statedir as documented ... Enables the behavior described in the statepath flag, where if only statedir is passed, then state is statedir/tailscaled.state. Signed-off-by: James Tucker <james@tailscale.com>	3 years ago
Tom DNetto	9dee6adfab	cmd/tailscaled,ipn/ipnlocal,wgengine/...: pass dns.Manager into netstack ... Needed for a following commit which moves magicDNS handling into netstack. Signed-off-by: Tom DNetto <tom@tailscale.com>	3 years ago
Maisem Ali	5a1ef1bbb9	net/tsdial: add SystemDial as a wrapper on netns.Dial ... The connections returned from SystemDial are automatically closed when there is a major link change. Also plumb through the dialer to the noise client so that connections are auto-reset when moving from cellular to WiFi etc. Updates #3363 Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
James Tucker	8de7f9bff7	tailscaled: no longer tune gcpercent ... Usage of userspace-networking is increasing, and the aggressive GC tuning causes a significant reduction in performance in that mode. Signed-off-by: James Tucker <james@tailscale.com>	3 years ago
Josh Bleecher Snyder	77b4fe0afa	all: remove "no 1.18 support" failures ... We have worked around the issue in DERP, so the vanilla Go 1.18 toolchain now works. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Brad Fitzpatrick	1db46919ab	cmd/tailscaled: make build fail nicely on older Go versions ... Due to a bug in Go (golang/go#51778), cmd/go doesn't warn about your Go version being older than the go.mod's declared Go version in that case that package loading fails before the build starts, such as when you use packages that are only in the current version of Go, like our use of net/netip. This change works around that Go bug by adding build tags and a pre-Go1.18-only file that will cause Go 1.17 and earlier to fail like: $ ~/sdk/go1.17/bin/go install ./cmd/tailscaled # tailscale.com/cmd/tailscaled ./required_version.go:11:2: undefined: you_need_Go_1_18_to_compile_Tailscale note: module requires Go 1.18 Change-Id: I39f5820de646703e19dde448dd86a7022252f75c Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	ead16b24ec	cmd/tailscaled: fail early with nice error on macOS with go1.18 ... Due to golang/go#51759 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	db85384f9c	cmd/tailscaled: default to userspace-networking mode on gokrazy, set paths ... One of the current few steps to run Tailscale on gokrazy is to specify the --tun=userspace-networking flag: https://gokrazy.org/userguide/install/tailscale/ Instead, make it the default for now. Later we can change the default to kernel mode if available and fall back to userspace mode like Synology, once #391 is done. Likewise, set default paths for Gokrazy, as its filesystem hierarchy is not the Linux standard one. Instead, use the conventional paths as documented at https://gokrazy.org/userguide/install/tailscale/. Updates #1866 RELNOTE=default to userspace-networking mode on gokrazy Change-Id: I3766159a294738597b4b30629d2860312dbb7609 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Maisem Ali	497324ddf6	ipn/store: add common package for instantiating ipn.StateStores ... Also move KubeStore and MemStore into their own package. RELNOTE: tsnet now supports providing a custom ipn.StateStore. Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Brad Fitzpatrick	4cbdc84d27	cmd/tailscaled/childproc: add be-child registration mechanism ... For ssh and maybe windows service babysitter later. Updates #3802 Change-Id: I7492b98df98971b3fb72d148ba92c2276cca491f Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	7d897229d9	net/dns: ignore permission errors on Synology DSM7 for now ... Updates #4017 Change-Id: Ia7fd4df47588c010dea8e63d88f397cc8eb748e5 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Maisem Ali	f9a50779e2	cmd/tailscaled: add `-state=mem:` to support creation of an ephemeral node. ... RELNOTE=`tailscaled --state=mem:` registers as an ephemeral node and does not store state to disk. Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
Brad Fitzpatrick	f3c0023add	wgengine/netstack: add an SSH server experiment ... Disabled by default. To use, run tailscaled with: TS_SSH_ALLOW_LOGIN=you@bar.com And enable with: $ TAILSCALE_USE_WIP_CODE=true tailscale up --ssh=true Then ssh [any-user]@[your-tailscale-ip] for a root bash shell. (both the "root" and "bash" part are temporary) Updates #3802 Change-Id: I268f8c3c95c8eed5f3231d712a5dc89615a406f0 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	41fd4eab5c	envknob: add new package for all the strconv.ParseBool(os.Getenv(..)) ... A new package can also later record/report which knobs are checked and set. It also makes the code cleaner & easier to grep for env knobs. Change-Id: Id8a123ab7539f1fadbd27e0cbeac79c2e4f09751 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	92dfaf53bb	cmd/tailscaled: include Go runtime metrics in /debug/metrics ... Fixes #3772 Change-Id: I237ea23268664d99e83d27890146018b04474556 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	ae319b4636	wgengine/magicsock: add HTML debug handler to see magicsock state ... Change-Id: Ibc46f4e9651e1c86ec6f5d139f5e9bdc7a488415 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	a28d280b95	cmd/tailscaled: move start-up failure logging to one place ... The caller of func run said: // No need to log; the func already did But that wasn't true. Some return paths didn't log. So instead, return rich errors and have func main do the logging, so we can't miss anything in the future. Prior to this, safesocket.Listen for instance was causing tailscaled to os.Exit(1) on failure without any clue as to why. Change-Id: I9d71cc4d73d0fed4aa1b1902cae199f584f25793 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	9c5c9d0a50	ipn/ipnlocal, net/tsdial: make SOCKS/HTTP dials use ExitDNS ... And simplify, unexport some tsdial/netstack stuff in the the process. Fixes #3475 Change-Id: I186a5a5cbd8958e25c075b4676f7f6e70f3ff76e Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	adc5997592	net/tsdial: give netstack a Dialer, start refactoring name resolution ... This starts to refactor tsdial.Dialer's name resolution to have different stages: in-memory MagicDNS vs system resolution. A future change will plug in ExitDNS resolution. This also plumbs a Dialer into netstack and unexports the dnsMap internals. And it removes some of the async AddNetworkMapCallback usage and replaces it with synchronous updates of the Dialer's netmap from LocalBackend, since the LocalBackend has the Dialer too. Updates #3475 Change-Id: Idcb7b1169878c74f0522f5151031ccbc49fe4cb4 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	ad3d6e31f0	net/tsdial: move macOS/iOS peerapi sockopt logic from LocalBackend ... Change-Id: I812cae027c40c70cdc701427b1a1850cd9bcd60c Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	c7fb26acdb	net/tsdial: also plumb TUN name and monitor into tsdial.Dialer ... In prep for moving stuff out of LocalBackend. Change-Id: I9725aa9c3ebc7275f8c40e040b326483c0340127 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	c37af58ea4	net/tsdial: move more weirdo dialing into new tsdial package, plumb ... Not done yet, but this move more of the outbound dial special casing from random packages into tsdial, which aspires to be the one unified place for all outbound dialing shenanigans. Then this plumbs it all around, so everybody is ultimately holding on to the same dialer. As of this commit, macOS/iOS using an exit node should be able to reach to the exit node's DoH DNS proxy over peerapi, doing the sockopt to stay within the Network Extension. A number of steps remain, including but limited to: * move a bunch more random dialing stuff * make netstack-mode tailscaled be able to use exit node's DNS proxy, teaching tsdial's resolver to use it when an exit node is in use. Updates #1713 Change-Id: I1e8ee378f125421c2b816f47bc2c6d913ddcd2f5 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	d5405c66b7	net/tsdial: start of new package to unify all outbound dialing complexity ... For now this just deletes the net/socks5/tssocks implementation (and the DNSMap stuff from wgengine/netstack) and moves it into net/tsdial. Then initialize a Dialer early in tailscaled, currently only use for the outbound and SOCKS5 proxies. It will be plumbed more later. Notably, it needs to get down into the DNS forwarder for exit node DNS forwading in netstack mode. But it will also absorb all the peerapi setsockopt and netns Dial and tlsdial complexity too. Updates #1713 Change-Id: Ibc6d56ae21a22655b2fa1002d8fc3f2b2ae8b6df Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
David Anderson	6e584ffa33	cmd/tailscaled: allow running the SOCKS5 and HTTP proxies on the same port. ... Fixes #3248 Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
Thomas Weiß	6dc6ea9b37	cmd/tailscaled: log error on state store init failure ... Signed-off-by: Thomas Weiß <panos@unbunt.org>	3 years ago