tailscale

Commit Graph

Author	SHA1	Message	Date
Maisem Ali	4a8cb1d9f3	all: use math/rand/v2 more Updates #11058 Signed-off-by: Maisem Ali <maisem@tailscale.com>	5 months ago
Andrew Dunham	fd94d96e2b	net/portmapper: support legacy "urn:dslforum-org" portmapping services These are functionally the same as the "urn:schemas-upnp-org" services with a few minor changes, and are still used by older devices. Support them to improve our ability to obtain an external IP on such networks. Updates #10911 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I05501fad9d6f0a3b8cf19fc95eee80e7d16cc2cf	10 months ago
Andrew Dunham	b45089ad85	net/portmapper: handle cases where we have no supported clients This no longer results in a nil pointer exception when we get a valid UPnP response with no supported clients. Updates #10911 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I6e3715a49a193ff5261013871ad7fff197a4d77e	10 months ago
Andrew Dunham	3c333f6341	net/portmapper: add logs about obtained mapping(s) This logs additional information about what mapping(s) are obtained during the creation process, including whether we return an existing cached mapping. Updates #10597 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I9ff25071f064c91691db9ab0b9365ccc5f948d6e	11 months ago
Andrew Dunham	d05a572db4	net/portmapper: handle multiple UPnP discovery responses Instead of taking the first UPnP response we receive and using that to create port mappings, store all received UPnP responses, sort and deduplicate them, and then try all of them to obtain an external address. Updates #10602 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I783ccb1834834ee2a9ecbae2b16d801f2354302f	11 months ago
Andrew Dunham	bac4890467	net/portmapper: be smarter about selecting a UPnP device Previously, we would select the first WANIPConnection2 (and related) client from the root device, without any additional checks. However, some routers expose multiple UPnP devices in various states, and simply picking the first available one can result in attempting to perform a portmap with a device that isn't functional. Instead, mimic what the miniupnpc code does, and prefer devices that are (a) reporting as Connected, and (b) have a valid external IP address. For our use-case, we additionally prefer devices that have an external IP address that's a public address, to increase the likelihood that we can obtain a direct connection from peers. Finally, we split out fetching the root device (getUPnPRootDevice) from selecting the best service within that root device (selectBestService), and add some extensive tests for various UPnP server behaviours. RELNOTE=Improve UPnP portmapping when multiple UPnP services exist Updates #8364 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I71795cd80be6214dfcef0fe83115a5e3fe4b8753	11 months ago
Andrew Dunham	d9ae7d670e	net/portmapper: add clientmetric for UPnP error codes This should allow us to gather a bit more information about errors that we encounter when creating UPnP mappings. Since we don't have a "LabelMap" construction for clientmetrics, do what sockstats does and lazily register a new metric when we see a new code. Updates #9343 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: Ibb5aadd6138beb58721f98123debcc7273b611ba	1 year ago
Andrew Dunham	9ee173c256	net/portmapper: fall back to permanent UPnP leases if necessary Some routers don't support lease times for UPnP portmapping; let's fall back to adding a permanent lease in these cases. Additionally, add a proper end-to-end test case for the UPnP portmapping behaviour. Updates #9343 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I17dec600b0595a5bfc9b4d530aff6ee3109a8b12	1 year ago
Brad Fitzpatrick	4e91cf20a8	control/controlknobs, all: add plumbed Knobs type, not global variables Previously two tsnet nodes in the same process couldn't have disjoint sets of controlknob settings from control as both would overwrite each other's global variables. This plumbs a new controlknobs.Knobs type around everywhere and hangs the knobs sent by control on that instead. Updates #9351 Change-Id: I75338646d36813ed971b4ffad6f9a8b41ec91560 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Andrew Dunham	c86a610eb3	cmd/tailscale, net/portmapper: add --log-http option to "debug portmap" This option allows logging the raw HTTP requests and responses that the portmapper Client makes when using UPnP. This can be extremely helpful when debugging strange UPnP issues with users' devices, and might allow us to avoid having to instruct users to perform a packet capture. Updates #8992 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I2c3cf6930b09717028deaff31738484cc9b008e4	1 year ago
Andrew Dunham	77ff705545	net/portmapper: never select port 0 in UPnP Port 0 is interpreted, per the spec (but inconsistently among router software) as requesting to map every single available port on the UPnP gateway to the internal IP address. We'd previously avoided picking ports below 1024 for one of the two UPnP methods (in #7457), and this change moves that logic so that we avoid it in all cases. Updates #8992 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I20d652c0cd47a24aef27f75c81f78ae53cc3c71e	1 year ago
Mihai Parparita	7330aa593e	all: avoid repeated default interface lookups On some platforms (notably macOS and iOS) we look up the default interface to bind outgoing connections to. This is both duplicated work and results in logspam when the default interface is not available (i.e. when a phone has no connectivity, we log an error and thus cause more things that we will try to upload and fail). Fixed by passing around a netmon.Monitor to more places, so that we can use its cached interface state. Fixes #7850 Updates #7621 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	2 years ago
Andrew Dunham	51eb0b2cb7	net/portmapper: send UPnP protocol in upper-case We were previously sending a lower-case "udp" protocol, whereas other implementations like miniupnp send an upper-case "UDP" protocol. For compatibility, use an upper-case protocol instead. Updates #7377 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I4aed204f94e4d51b7a256d29917af1536cb1b70f	2 years ago
Andrew Dunham	d379a25ae4	net/portmapper: don't pick external ports below 1024 Some devices don't let you UPnP portmap a port below 1024, so let's just avoid that range of ports entirely. Updates #7377 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: Ib7603b1c9a019162cdc4fa21744a2cae48bb1d86	2 years ago
Andrew Dunham	3f8e8b04fd	cmd/tailscale, cmd/tailscaled: move portmapper debugging into tailscale CLI The debug flag on tailscaled isn't available in the macOS App Store build, since we don't have a tailscaled binary; move it to the 'tailscale debug' CLI that is available on all platforms instead, accessed over LocalAPI. Updates #7377 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I47bffe4461e036fab577c2e51e173f4003592ff7	2 years ago
Will Norris	71029cea2d	all: update copyright and license headers This updates all source files to use a new standard header for copyright and license declaration. Notably, copyright no longer includes a date, and we now use the standard SPDX-License-Identifier header. This commit was done almost entirely mechanically with perl, and then some minimal manual fixes. Updates #6865 Signed-off-by: Will Norris <will@tailscale.com>	2 years ago
Jordan Whited	25a0091f69	net/portmapper: relax handling of UPnP resp (#6946 ) Gateway devices operating as an HA pair w/VRRP or CARP may send UPnP replies from static addresses rather than the floating gateway address. This commit relaxes our source address verification such that we parse responses from non-gateway IPs, and re-point the UPnP root desc URL to the gateway IP. This ensures we are still interfacing with the gateway device (assuming L2 security intact), even though we got a root desc from a non-gateway address. This relaxed handling is required for ANY port mapping to work on certain OPNsense/pfsense distributions using CARP at the time of writing, as miniupnpd may only listen on the static, non-gateway interface address for PCP and PMP. Fixes #5502 Signed-off-by: Jordan Whited <jordan@tailscale.com>	2 years ago
Brad Fitzpatrick	da8def8e13	all: remove old +build tags The //go:build syntax was introduced in Go 1.17: https://go.dev/doc/go1.17#build-lines gofmt has kept the +build and go:build lines in sync since then, but enough time has passed. Time to remove them. Done with: perl -i -npe 's,^// \+build.*\n,,' $(git grep -l -F '+build') Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	a12aad6b47	all: convert more code to use net/netip directly perl -i -npe 's,netaddr.IPPrefixFrom,netip.PrefixFrom,' $(git grep -l -F netaddr.) perl -i -npe 's,netaddr.IPPortFrom,netip.AddrPortFrom,' $(git grep -l -F netaddr. ) perl -i -npe 's,netaddr.IPPrefix,netip.Prefix,g' $(git grep -l -F netaddr. ) perl -i -npe 's,netaddr.IPPort,netip.AddrPort,g' $(git grep -l -F netaddr. ) perl -i -npe 's,netaddr.IP\b,netip.Addr,g' $(git grep -l -F netaddr. ) perl -i -npe 's,netaddr.IPv6Raw\b,netip.AddrFrom16,g' $(git grep -l -F netaddr. ) goimports -w . Then delete some stuff from the net/netaddr shim package which is no longer neeed. Updates #5162 Change-Id: Ia7a86893fe21c7e3ee1ec823e8aba288d4566cd8 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	6a396731eb	all: use various net/netip parse funcs directly Mechanical change with perl+goimports. Changed {Must,}Parse{IP,IPPrefix,IPPort} to their netip variants, then goimports -d . Finally, removed the net/netaddr wrappers, to prevent future use. Updates #5162 Change-Id: I59c0e38b5fbca5a935d701645789cddf3d7863ad Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	7eaf5e509f	net/netaddr: start migrating to net/netip via new netaddr adapter package Updates #5162 Change-Id: Id7bdec303b25471f69d542f8ce43805328d56c12 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Denton Gentry	b5553c6ad2	net/portmap: run go fmt Signed-off-by: Denton Gentry <dgentry@tailscale.com>	2 years ago
Denton Gentry	7fffddce8e	net/portmapper: enable for iOS In the 1.27 unstable releases we set the min-version to iOS15, which means we have 50 MBytes of RAM in the Network Extension. https://tailscale.com/blog/go-linker/ Include the UPnP/NAT-PMP/PCP portmapper support now that there is memory for it. Fixes https://github.com/tailscale/tailscale/issues/2495 Signed-off-by: Denton Gentry <dgentry@tailscale.com>	2 years ago
Mihai Parparita	27a1ad6a70	wasm: exclude code that's not used on iOS for Wasm too It has similar size constraints. Saves ~1.9MB from the Wasm build. Updates #3157 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	2 years ago
Josh Bleecher Snyder	758c37b83d	net/netns: thread logf into control functions So that darwin can log there without panicking during tests. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
julianknodt	b9bd7dbc5d	net/portmapper: log upnp information This logs some basic statistics for UPnP, so that tailscale can better understand what routers are being used and how to connect to them. Signed-off-by: julianknodt <julianknodt@gmail.com>	3 years ago
julianknodt	85304d7392	net/portmapper: check disable flags Signed-off-by: julianknodt <julianknodt@gmail.com>	3 years ago
Josh Bleecher Snyder	a5da4ed981	all: gofmt with Go 1.17 This adds "//go:build" lines and tidies up existing "// +build" lines. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Brad Fitzpatrick	fdc081c291	net/portmapper: fix UPnP probing, work against all ports Prior to Tailscale 1.12 it detected UPnP on any port. Starting with Tailscale 1.11.x, it stopped detecting UPnP on all ports. Then start plumbing its discovered Location header port number to the code that was assuming port 5000. Fixes #2109 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	7b295f3d21	net/portmapper: disable UPnP on iOS for now Updates #2495 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
julianknodt	3a4201e773	net/portmapper: return correct upnp port Previously, this was incorrectly returning the internal port, and using that with the external exposed IP when it did not use WANIPConnection2. In the case when we must provide a port, we return it instead. Noticed this while implementing the integration test for upnp. Signed-off-by: julianknodt <julianknodt@gmail.com>	3 years ago
Brad Fitzpatrick	171ec9f8f4	control/{controlknobs,controlclient}: simplify knobs API, fix controlclient crash From integration tests elsewhere: panic: runtime error: invalid memory address or nil pointer dereference [signal SIGSEGV: segmentation violation code=0x1 addr=0x70 pc=0x845c9b] goroutine 226 [running]: tailscale.com/control/controlclient.(Direct).sendMapRequest(0xc00053e1e0, 0x16670f0, 0xc000353780, 0xffffffffffffffff, 0xc0003e5f10, 0x0, 0x0) /home/runner/go/pkg/mod/tailscale.com@v1.1.1-0.20210715222212-1bb6abc604c1/control/controlclient/direct.go:803 +0x19bb tailscale.com/control/controlclient.(Direct).PollNetMap(...) /home/runner/go/pkg/mod/tailscale.com@v1.1.1-0.20210715222212-1bb6abc604c1/control/controlclient/direct.go:574 tailscale.com/control/controlclient.(Auto).mapRoutine(0xc00052a1e0) /home/runner/go/pkg/mod/tailscale.com@v1.1.1-0.20210715222212-1bb6abc604c1/control/controlclient/auto.go:464 +0x571 created by tailscale.com/control/controlclient.(Auto).Start /home/runner/go/pkg/mod/tailscale.com@v1.1.1-0.20210715222212-1bb6abc604c1/control/controlclient/auto.go:151 +0x65 exit status 2 Also remove types/opt.Bool API addition which is now unnecessary. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
julianknodt	1bb6abc604	net/portmapper: add upnp port mapping Add in UPnP portmapping, using goupnp library in order to get the UPnP client and run the portmapping functions. This rips out anywhere where UPnP used to be in portmapping, and has a flow separate from PMP and PCP. RELNOTE=portmapper now supports UPnP mappings Fixes #682 Updates #2109 Signed-off-by: julianknodt <julianknodt@gmail.com>	3 years ago

33 Commits (0def4f8e38c6cf8f2f2004607de4fef6b7dcb79c)