tailscale

Commit Graph

Author	SHA1	Message	Date
Brad Fitzpatrick	9c5c9d0a50	ipn/ipnlocal, net/tsdial: make SOCKS/HTTP dials use ExitDNS And simplify, unexport some tsdial/netstack stuff in the the process. Fixes #3475 Change-Id: I186a5a5cbd8958e25c075b4676f7f6e70f3ff76e Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	adc5997592	net/tsdial: give netstack a Dialer, start refactoring name resolution This starts to refactor tsdial.Dialer's name resolution to have different stages: in-memory MagicDNS vs system resolution. A future change will plug in ExitDNS resolution. This also plumbs a Dialer into netstack and unexports the dnsMap internals. And it removes some of the async AddNetworkMapCallback usage and replaces it with synchronous updates of the Dialer's netmap from LocalBackend, since the LocalBackend has the Dialer too. Updates #3475 Change-Id: Idcb7b1169878c74f0522f5151031ccbc49fe4cb4 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	8775c646be	net/tsdial: make dialing to peerapi work in netstack mode With this, I'm able to send a Taildrop file (using "tailscale file cp") from a Linux machine running --tun=userspace-networking. Updates #2179 Change-Id: I4e7a4fb0fbda393e4fb483adb06b74054a02cfd0 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	ad3d6e31f0	net/tsdial: move macOS/iOS peerapi sockopt logic from LocalBackend Change-Id: I812cae027c40c70cdc701427b1a1850cd9bcd60c Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	c7fb26acdb	net/tsdial: also plumb TUN name and monitor into tsdial.Dialer In prep for moving stuff out of LocalBackend. Change-Id: I9725aa9c3ebc7275f8c40e040b326483c0340127 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	c37af58ea4	net/tsdial: move more weirdo dialing into new tsdial package, plumb Not done yet, but this move more of the outbound dial special casing from random packages into tsdial, which aspires to be the one unified place for all outbound dialing shenanigans. Then this plumbs it all around, so everybody is ultimately holding on to the same dialer. As of this commit, macOS/iOS using an exit node should be able to reach to the exit node's DoH DNS proxy over peerapi, doing the sockopt to stay within the Network Extension. A number of steps remain, including but limited to: * move a bunch more random dialing stuff * make netstack-mode tailscaled be able to use exit node's DNS proxy, teaching tsdial's resolver to use it when an exit node is in use. Updates #1713 Change-Id: I1e8ee378f125421c2b816f47bc2c6d913ddcd2f5 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Josh Bleecher Snyder	2075c39fd7	net/portmapper: deflake TestPCPIntegration Logging in goroutines after the test completed caused data races and panics. Prevent that. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Brad Fitzpatrick	d5405c66b7	net/tsdial: start of new package to unify all outbound dialing complexity For now this just deletes the net/socks5/tssocks implementation (and the DNSMap stuff from wgengine/netstack) and moves it into net/tsdial. Then initialize a Dialer early in tailscaled, currently only use for the outbound and SOCKS5 proxies. It will be plumbed more later. Notably, it needs to get down into the DNS forwarder for exit node DNS forwading in netstack mode. But it will also absorb all the peerapi setsockopt and netns Dial and tlsdial complexity too. Updates #1713 Change-Id: Ibc6d56ae21a22655b2fa1002d8fc3f2b2ae8b6df Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	3ae6f898cf	ipn/ipnlocal, net/dns/resolver: use exit node's DoH proxy when available Updates #1713 Change-Id: I3695a40ec12d2b4e6dac41cf4559daca6dddd68e Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Aaron Klotz	f93cf6fa03	net/dns: fix checking for wrapped error when attempting to read wsl.conf for Windows WSL2 Fixes https://github.com/tailscale/tailscale/issues/3437 Signed-off-by: Aaron Klotz <aaron@tailscale.com>	3 years ago
David Anderson	124363e0ca	net/dns: detect and decode UTF-16 from wsl.exe earlier. Fixes #3170 Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
Josh Bleecher Snyder	e16cb523aa	net/nettest: deflake TestPipeTimeout The block-write and block-read tests are both flaky, because each assumes it can get a normal read/write completed within 10ms. This isn’t always true. We can’t increase the timeouts, because that slows down the test. However, we don’t need to issue a regular read/write for this test. The immediately preceding tests already test this code, using a far more generous timeout. Remove the extraneous read/write. This drops the failure rate from 1 per 20,000 to undetectable on my machine. While we’re here, fix a typo in a debug print statement. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Josh Bleecher Snyder	a8cc519c70	net/portmapper: improve handling of UPnP parse errors Without the continue, we might overwrite our current meta with a zero meta. Log the error, so that we can check for anything unexpected. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Josh Bleecher Snyder	fddf43f3d1	net/portmapper: fill out PCP/PMP client metrics Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Josh Bleecher Snyder	9787ec6f4a	net/portmapper: add UPnP client metrics Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Josh Bleecher Snyder	40f11c50a1	net/portmapper: make PCP/PMP result codes stringers Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Josh Bleecher Snyder	38d90fa330	net/portmapper: add clientmetrics for PCP/PMP responses Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Josh Bleecher Snyder	999814e9e1	net/portmapper: handle pcp ADDRESS_MISMATCH response These show up a fair amount in our logs. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Brad Fitzpatrick	bb91cfeae7	net/socks5/tssocks, wgengine: permit SOCKS through subnet routers/exit nodes Fixes #1970 Change-Id: Ibef45e8796e1d9625716d72539c96d1dbf7b1f76 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
David Anderson	a54d13294f	net/proxymux: add a listener mux that can run SOCKS and HTTP on a single socket. Updates #3248 Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
Brad Fitzpatrick	135580a5a8	tailcfg, ipn/ipnlocal, net/dns: forward exit node DNS on Unix to system DNS Updates #1713 Change-Id: I4c073fec0992d9e01a9a4ce97087d5af0efdc68d Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	78b0bd2957	net/dns/resolver: add clientmetrics for DNS Fixes tailscale/corp#1811 Change-Id: I864d11e0332a177e8c5ff403591bff6fec548f5a Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	25525b7754	net/dns/resolver, ipn/ipnlocal: wire up peerapi DoH server to DNS forwarder Updates #1713 Change-Id: Ia4ed9d8c9cef0e70aa6d30f2852eaab80f5f695a Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Josh Bleecher Snyder	d10cefdb9b	net/dns: require space after nameserver/search parsing resolv.conf Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Josh Bleecher Snyder	9f00510833	net/dns: handle comments in resolv.conf Currently, comments in resolv.conf cause our parser to fail, with error messages like: ParseIP("192.168.0.100 # comment"): unexpected character (at " # comment") Fix that. Noticed while looking through logs. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Josh Bleecher Snyder	73beaaf360	net/tstun: rate limit "self disco out packet" logging When this happens, it is incredibly noisy in the logs. It accounts for about a third of all remaining "unexpected" log lines from a recent investigation. It's not clear that we know how to fix this, we have a functioning workaround, and we now have a (cheap and efficient) metric for this that we can use for measurements. So reduce the logging to approximately once per minute. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Brad Fitzpatrick	283ae702c1	ipn/ipnlocal: start adding DoH DNS server to peerapi when exit node Updates #1713 Change-Id: I8d9c488f779e7acc811a9bc18166a2726198a429 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Josh Bleecher Snyder	ad5e04249b	wgengine/monitor: ignore adding/removing uninteresting IPs One of the most common "unexpected" log lines is: "network state changed, but stringification didn't" One way that this can occur is if an interesting interface (non-Tailscale, has interesting IP address) gains or loses an uninteresting IP address (link local or loopback). The fact that the interface is interesting is enough for EqualFiltered to inspect it. The fact that an IP address changed is enough for EqualFiltered to declare that the interfaces are not equal. But the State.String method reasonably declines to print any uninteresting IP addresses. As a result, the network state appears to have changed, but the stringification did not. The String method is correct; nothing interesting happened. This change fixes this by adding an IP address filter to EqualFiltered in addition to the interface filter. This lets the network monitor ignore the addition/removal of uninteresting IP addresses. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Josh Bleecher Snyder	ca1b3fe235	net/tshttpproxy: use correct size for Windows BOOL argument The Windows BOOL type is an int32. We were using a bool, which is a one byte wide. This could be responsible for the ERROR_INVALID_PARAMETER errors we were seeing for calls to WinHttpGetProxyForUrl. We manually checked all other existing Windows syscalls for similar mistakes and did not find any. Updates #879 Co-authored-by: Aaron Klotz <aaron@tailscale.com> Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Josh Bleecher Snyder	1a629a4715	net/portmapper: mark fewer PMP probe failures as unexpected There are lots of lines in the logs of the form: portmapper: unexpected PMP probe response: {OpCode:128 ResultCode:3 SecondsSinceEpoch:NNN MappingValidSeconds:0 InternalPort:0 ExternalPort:0 PublicAddr:0.0.0.0} ResultCode 3 here means a network failure, e.g. the NAT box itself has not obtained a DHCP lease. This is not an indication that something is wrong in the Tailscale client, so use different wording here to reflect that. Keep logging, so that we can analyze and debug the reasons that PMP probes fail. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
David Anderson	88b8a09d37	net/dns: make constants for the various DBus strings. Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	6c82cebe57	health: add a health state for net/dns.OSConfigurator. Lets the systemd-resolved OSConfigurator report health changes for out of band config resyncs. Updates #3327 Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	4ef3fed100	net/dns: resync config to systemd-resolved when it restarts. Fixes #3327 Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	cf9169e4be	net/dns: remove unused Config struct element. Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
Josh Bleecher Snyder	758c37b83d	net/netns: thread logf into control functions So that darwin can log there without panicking during tests. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Brad Fitzpatrick	cf06f9df37	net/tstun, wgengine: add packet-level and drop metrics Primarily tstun work, but some MagicDNS stuff spread into wgengine. No wireguard reconfig metrics (yet). Updates #3307 Change-Id: Ide768848d7b7d0591e558f118b553013d1ec94ad Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	400ed799e6	net/dns: work around old systemd-resolved setLinkDomain length limit Don't set all the *.arpa. reverse DNS lookup domains if systemd-resolved is old and can't handle them. Fixes #3188 Change-Id: I283f8ce174daa8f0a972ac7bfafb6ff393dde41d Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Brad Fitzpatrick	24ea365d48	netcheck, controlclient, magicsock: add more metrics Updates #3307 Change-Id: Ibb33425764a75bde49230632f1b472f923551126 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
David Anderson	c5d572f371	net/dns: correctly handle NetworkManager-managed DNS that points to resolved. Fixes #3304 Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
Maisem Ali	eccc2ac6ee	net/interfaces/windows: update Tailscale interface detection logic to account for new wintun naming. Signed-off-by: Maisem Ali <maisem@tailscale.com>	3 years ago
David Anderson	0532eb30db	all: replace tailcfg.DiscoKey with key.DiscoPublic. Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
Josh Bleecher Snyder	94fb42d4b2	all: use testingutil.MinAllocsPerRun There are a few remaining uses of testing.AllocsPerRun: Two in which we only log the number of allocations, and one in which dynamically calculate the allocations target based on a different AllocsPerRun run. This also allows us to tighten the "no allocs" test in wgengine/filter. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Denton Gentry	5302e4be96	net/portmapper: only print PCP/PMP if VerboseLogs Make UPnP, NAT-PMP, and PCP packet reception logs be [v1] so they will never appear on stdout and instead only go to logtail. ``` $ tailscale netcheck 2021/10/15 22:50:31 portmap: Got PMP response; IP: w.x.y.z, epoch: 1012707 2021/10/15 22:50:31 portmap: Got PCP response: epoch: 1012707 Report: * UDP: true * IPv4: yes, w.x.y.z:1511 * IPv6: no * MappingVariesByDestIP: true * HairPinning: false * PortMapping: NAT-PMP, PCP * Nearest DERP: San Francisco * DERP latency: - sfo: 5.9ms (San Francisco) - sea: 24ms (Seattle) - dfw: 45ms (Dallas) - ord: 53.7ms (Chicago) - nyc: 74.1ms (New York City) - tok: 111.1ms (Tokyo) - lhr: 139.4ms (London) - syd: 152.7ms (Sydney) - fra: 153.1ms (Frankfurt) - sin: 182.1ms (Singapore) - sao: 190.1ms (S_o Paulo) - blr: 218.6ms (Bangalore) ``` Signed-off-by: Denton Gentry <dgentry@tailscale.com>	3 years ago
David Anderson	060ba86baa	net/portmapper: ignore IGD SSDP responses from !defaultgw Now that we multicast the SSDP query, we can get IGD offers from devices other than the current device's default gateway. We don't want to accidentally bind ourselves to those. Updates #3197 Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	4a65b07e34	net/portmapper: also send UPnP SSDP query to the SSDP multicast address. Fixes #3197 Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
Brad Fitzpatrick	b0b0a80318	net/netcheck: implement netcheck for js/wasm clients And the derper change to add a CORS endpoint for latency measurement. And a little magicsock change to cut down some log spam on js/wasm. Updates #3157 Change-Id: I5fd9e6f5098c815116ddc8ac90cbcd0602098a48 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Denton Gentry	139a6c4c9c	net/dns: detect when resolvconf points to systemd-resolved. There are /etc/resolv.conf files out there where resolvconf wrote the file but pointed to systemd-resolved as the nameserver. We're better off handling those as systemd-resolved. > # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) > # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN > # 127.0.0.53 is the systemd-resolved stub resolver. > # run "systemd-resolve --status" to see details about the actual nameservers. Fixes https://github.com/tailscale/tailscale/issues/3026 Signed-off-by: Denton Gentry <dgentry@tailscale.com>	3 years ago
David Anderson	a320d70614	net/dns: fall back to copy+delete/truncate if moving to/from /etc/resolv.conf fails. In some containers, /etc/resolv.conf is a bind-mount from outside the container. This prevents renaming to or from /etc/resolv.conf, because it's on a different filesystem from linux's perspective. It also prevents removing /etc/resolv.conf, because doing so would break the bind-mount. If we find ourselves within this environment, fall back to using copy+delete when renaming to /etc/resolv.conf, and copy+truncate when renaming from /etc/resolv.conf. Fixes #3000 Co-authored-by: Denton Gentry <dgentry@tailscale.com> Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	04d24d3a38	net/dns: move directManager function below directManager's definition. Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago
David Anderson	422ea4980f	net/dns: remove a tiny wrapper function that isn't contributing anything. Signed-off-by: David Anderson <danderson@tailscale.com>	3 years ago

1 2 3 4 5 ...

488 Commits (05c1be3e47b708888c920731341aafeb7a3453c8)