Commit Graph

283 Commits (05c1be3e47b708888c920731341aafeb7a3453c8)

Author SHA1 Message Date
Brad Fitzpatrick 9c5c9d0a50 ipn/ipnlocal, net/tsdial: make SOCKS/HTTP dials use ExitDNS
And simplify, unexport some tsdial/netstack stuff in the the process.

Fixes #3475

Change-Id: I186a5a5cbd8958e25c075b4676f7f6e70f3ff76e
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Brad Fitzpatrick adc5997592 net/tsdial: give netstack a Dialer, start refactoring name resolution
This starts to refactor tsdial.Dialer's name resolution to have
different stages: in-memory MagicDNS vs system resolution. A future
change will plug in ExitDNS resolution.

This also plumbs a Dialer into netstack and unexports the dnsMap
internals.

And it removes some of the async AddNetworkMapCallback usage and
replaces it with synchronous updates of the Dialer's netmap
from LocalBackend, since the LocalBackend has the Dialer too.

Updates #3475

Change-Id: Idcb7b1169878c74f0522f5151031ccbc49fe4cb4
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Brad Fitzpatrick ad3d6e31f0 net/tsdial: move macOS/iOS peerapi sockopt logic from LocalBackend
Change-Id: I812cae027c40c70cdc701427b1a1850cd9bcd60c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Brad Fitzpatrick c7fb26acdb net/tsdial: also plumb TUN name and monitor into tsdial.Dialer
In prep for moving stuff out of LocalBackend.

Change-Id: I9725aa9c3ebc7275f8c40e040b326483c0340127
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Brad Fitzpatrick c37af58ea4 net/tsdial: move more weirdo dialing into new tsdial package, plumb
Not done yet, but this move more of the outbound dial special casing
from random packages into tsdial, which aspires to be the one unified
place for all outbound dialing shenanigans.

Then this plumbs it all around, so everybody is ultimately
holding on to the same dialer.

As of this commit, macOS/iOS using an exit node should be able to
reach to the exit node's DoH DNS proxy over peerapi, doing the sockopt
to stay within the Network Extension.

A number of steps remain, including but limited to:

* move a bunch more random dialing stuff

* make netstack-mode tailscaled be able to use exit node's DNS proxy,
  teaching tsdial's resolver to use it when an exit node is in use.

Updates #1713

Change-Id: I1e8ee378f125421c2b816f47bc2c6d913ddcd2f5
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Brad Fitzpatrick d5405c66b7 net/tsdial: start of new package to unify all outbound dialing complexity
For now this just deletes the net/socks5/tssocks implementation (and
the DNSMap stuff from wgengine/netstack) and moves it into net/tsdial.

Then initialize a Dialer early in tailscaled, currently only use for the
outbound and SOCKS5 proxies. It will be plumbed more later. Notably, it
needs to get down into the DNS forwarder for exit node DNS forwading
in netstack mode. But it will also absorb all the peerapi setsockopt
and netns Dial and tlsdial complexity too.

Updates #1713

Change-Id: Ibc6d56ae21a22655b2fa1002d8fc3f2b2ae8b6df
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
David Anderson 6e584ffa33 cmd/tailscaled: allow running the SOCKS5 and HTTP proxies on the same port.
Fixes #3248

Signed-off-by: David Anderson <danderson@tailscale.com>
3 years ago
David Crawshaw 1e8b4e770a update github.com/aws/aws-sdk-go-v2
Replaces #3464, #3365, #3366 with a PR that includes the depaware fix.

Signed-off-by: David Crawshaw <crawshaw@tailscale.com>
3 years ago
Thomas Weiß 6dc6ea9b37 cmd/tailscaled: log error on state store init failure
Signed-off-by: Thomas Weiß <panos@unbunt.org>
3 years ago
Josh Bleecher Snyder 73beaaf360 net/tstun: rate limit "self disco out packet" logging
When this happens, it is incredibly noisy in the logs.
It accounts for about a third of all remaining
"unexpected" log lines from a recent investigation.

It's not clear that we know how to fix this,
we have a functioning workaround,
and we now have a (cheap and efficient) metric for this
that we can use for measurements.

So reduce the logging to approximately once per minute.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
3 years ago
Brad Fitzpatrick 283ae702c1 ipn/ipnlocal: start adding DoH DNS server to peerapi when exit node
Updates #1713

Change-Id: I8d9c488f779e7acc811a9bc18166a2726198a429
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Brad Fitzpatrick 2ea765e5d8 go.mod: bump inet.af/netstack
Updates #2642 (I'd hoped, but doesn't seem to fix it)

Change-Id: Id54af7c90a1206bc7018215957e20e954782b911
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Brad Fitzpatrick 5294125e7a cmd/tailscaled: disambiguate some startup failure error messages
Updates #3351

Change-Id: I0afead4a084623567f56b19187574fa97b295b2a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Brad Fitzpatrick 0653efb092 cmd/tailscaled: remove a redundant date prefix on Windows logs
Change-Id: I28e122d4384697f51a748d67829409276c00b11e
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Brad Fitzpatrick ec036b3561 logpolicy: use bootstrap DNS for logtail dialer
Fixes #3332

Change-Id: Ie45efb448e5508c3ece48dd1d8d7e9a39e2e9dc1
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
David Anderson 41da7620af go.mod: update wireguard-go to pick up roaming toggle
wgengine/wgcfg: introduce wgcfg.NewDevice helper to disable roaming
at all call sites (one real plus several tests).

Fixes tailscale/corp#3016.

Signed-off-by: David Anderson <danderson@tailscale.com>
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
3 years ago
Brad Fitzpatrick 3b541c833e util/clientmetric, logtail: log metric changes
Updates #3307

Change-Id: I1399ebd786f6ff7defe6e11c0eb651144c071574
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Brad Fitzpatrick 57b039c51d util/clientmetrics: add new package to add metrics to the client
And annotate magicsock as a start.

And add localapi and debug handlers with the Prometheus-format
exporter.

Updates #3307

Change-Id: I47c5d535fe54424741df143d052760387248f8d3
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Brad Fitzpatrick e6fbc0cd54 cmd/tailscaled, ipn/ipnserver: refactor ipnserver
More work towards removing the massive ipnserver.Run and ipnserver.Options
and making composable pieces.

Work remains. (The getEngine retry loop on Windows complicates things.)
For now some duplicate code exists. Once the Windows side is fixed
to either not need the retry loop or to move the retry loop into a
custom wgengine.Engine wrapper, then we can unify tailscaled_windows.go
too.

Change-Id: If84d16e3cd15b54ead3c3bb301f27ae78d055f80
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Brad Fitzpatrick 2b082959db safesocket: add WindowsLocalPort const
Remove all the 41112 references.

Change-Id: I2d7ed330d457e3bb91b7e6416cfb2667611e50c4
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Brad Fitzpatrick 649f7556e8 cmd/tailscaled, ipn: add tailscaled --statedir flag for var directory
Fixes #2932

Change-Id: I1aa2b323ad542386d140f8336bcc4dcbb8310bd0
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Josh Bleecher Snyder 3fd5f4380f util/multierr: new package
github.com/go-multierror/multierror served us well.
But we need a few feature from it (implement Is),
and it's not worth maintaining a fork of such a small module.

Instead, I did a clean room implementation inspired by its API.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
3 years ago
Brad Fitzpatrick ff1954cfd9 wgengine/router: use netlink for ip rules on Linux
Using temporary netlink fork in github.com/tailscale/netlink until we
get the necessary changes upstream in either vishvananda/netlink
or jsimonetti/rtnetlink.

Updates #391

Change-Id: I6e1de96cf0750ccba53dabff670aca0c56dffb7c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Brad Fitzpatrick 5dc5bd8d20 cmd/tailscaled, wgengine/netstack: always wire up netstack
Even if not in use. We plan to use it for more stuff later.

(not for iOS or macOS-GUIs yet; only tailscaled)

Change-Id: Idaef719d2a009be6a39f158fd8f57f8cca68e0ee
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
David Anderson 27e83402a8 cmd/tailscaled: fix depaware. 3 years ago
David Anderson 37c150aee1 derp: use new node key type.
Update #3206

Signed-off-by: David Anderson <danderson@tailscale.com>
3 years ago
David Anderson 15376f975b types/wgkey: delete, no longer used.
Updates #3206

Signed-off-by: David Anderson <danderson@tailscale.com>
3 years ago
David Anderson c41fe182f0 cmd/tailscaled: update depaware.
Signed-off-by: David Anderson <danderson@tailscale.com>
3 years ago
Brad Fitzpatrick dc2fbf5877 wgengine/router: start using netlink instead of 'ip' on Linux
Converts up, down, add/del addresses, add/del routes.

Not yet done: rules.

Updates #391

Change-Id: I02554ca07046d18f838e04a626ba99bbd35266fb
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Brad Fitzpatrick 31e4f60047 version: embed VERSION.txt in unstamped version
Temporary measure until we switch to Go 1.18.

    $ go run ./cmd/tailscale version
    1.17.0-date.20211022
      go version: go1.17

Updates #81

Change-Id: Ic82ebffa5f46789089e5fb9810b3f29e36a47f1a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Brad Fitzpatrick 505f844a43 cmd/derper, derp/derphttp: add websocket support
Updates #3157

Change-Id: I337a919a3b350bc7bd9af567b49c4d5d6616abdd
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Aaron Klotz c6ea282b3f utils/winutil utils/winutil/vss: add utility function for extracting data from Windows System Restore Point backups.
utils/winutil/vss contains just enough COM wrapping to query the Volume Shadow Copy service for snapshots.
WalkSnapshotsForLegacyStateDir is the friendlier interface that adds awareness of our actual use case,
mapping the snapshots and locating our legacy state directory.

Updates #3011

Signed-off-by: Aaron Klotz <aaron@tailscale.com>
3 years ago
Aaron Klotz 1991a1ac6a net/tstun: update tun_windows for wintun 0.14 API revisions, update wireguard-go dependency to 82d2aa87aa623cb5143a41c3345da4fb875ad85d
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
3 years ago
Maxime VISONNEAU 4528f448d6 ipn/store/aws, cmd/tailscaled: add AWS SSM ipn.StateStore implementation
From https://github.com/tailscale/tailscale/pull/1919 with
edits by bradfitz@.

This change introduces a new storage provider for the state file. It
allows users to leverage AWS SSM parameter store natively within
tailscaled, like:

    $ tailscaled --state=arn:aws:ssm:eu-west-1:123456789:parameter/foo

Known limitations:
- it is not currently possible to specific a custom KMS key ID

RELNOTE=tailscaled on Linux supports using AWS SSM for state

Edits-By: Brad Fitzpatrick <bradfitz@tailscale.com>
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Signed-off-by: Maxime VISONNEAU <maxime.visonneau@gmail.com>
3 years ago
Aaron Klotz df7899759d cmd/tailscaled: set the correct flag for receiving Windows session change events
This feature wasn't working until I realized that we also need to opt into
the events. MSDN wasn't so generous as to make this easy to deduce.

Updates #2956

Signed-off-by: Aaron Klotz <aaron@tailscale.com>
3 years ago
Brad Fitzpatrick 3618e8d8ac cmd/tailscaled: rename outbound HTTP proxy flag
The old name invited confusion:

* is this the HTTP proxy to use ourselves? (no, that's
  via an environment variable, per proxy conventions)
* is this for LetsEncrypt https-to-localhost-http
  proxying? (no, that'll come later)

So rename to super verbose --outbound-http-proxy-listen
before the 1.16.0 release to make it clear what it is.
It listens (serves) and it's for outbound, not inbound.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Aaron Klotz e016eaf410 cmd/tailscaled: conditionally flush Windows DNS cache on SessionChange
For the service, all we need to do is handle the `svc.SessionChange` command.
Upon receipt of a `windows.WTS_SESSION_UNLOCK` event, we fire off a goroutine to flush the DNS cache.
(Windows expects responses to service requests to be quick, so we don't want to do that synchronously.)

This is gated on an integral registry value named `FlushDNSOnSessionUnlock`,
whose value we obtain during service initialization.

(See [this link](https://docs.microsoft.com/en-us/windows/win32/api/winsvc/nc-winsvc-lphandler_function_ex) for information re: handling `SERVICE_CONTROL_SESSIONCHANGE`.)

Fixes #2956

Signed-off-by: Aaron Klotz <aaron@tailscale.com>
3 years ago
Brad Fitzpatrick 173bbaa1a1 all: disable TCP keep-alives on iOS/Android
Updates #2442
Updates tailscale/corp#2750

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Brad Fitzpatrick a7cb241db1 cmd/tailscaled: add support for running an HTTP proxy
This adds support for tailscaled to be an HTTP proxy server.
It shares the same backend dialing code as the SOCK5 server, but the
client protocol is HTTP (including CONNECT), rather than SOCKS.

Fixes #2289

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Brad Fitzpatrick 56d8c2da34 cmd/tailscaled: set StateDirectoryMode=0700 in tailscaled.service
Updates #2934

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Brad Fitzpatrick efb84ca60d ipn/localapi, cmd/tailscale: add CPU & memory profile support, debug command
This was already possible on Linux if you ran tailscaled with --debug
(which runs net/http/pprof), but it requires the user have the Go
toolchain around.

Also, it wasn't possible on macOS, as there's no way to run the IPNExtension
with a debug server (it doesn't run tailscaled).

And on Windows it's super tedious: beyond what users want to do or
what we want to explain.

Instead, put it in "tailscale debug" so it works and works the same on
all platforms. Then we can ask users to run it when we're debugging something
and they can email us the output files.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Brad Fitzpatrick 9ca334a560 cmd/tailscaled: appease a security scanner
There are two reasons this can't ever go to actual logs,
but rewrite it to make it happy.

Fixes tailscale/corp#2695

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
David Anderson 18086c4cb7 go.mod: bump github.com/klauspost/compress to 1.13.6
Signed-off-by: David Anderson <danderson@tailscale.com>
3 years ago
Aaron Klotz 9ebb5d4205 ipn, paths: ensure that the state directory for Windows has the correct perms
ProgramData has a permissive ACL. For us to safely store machine-wide
state information, we must set a more restrictive ACL on our state directory.
We set the ACL so that only talescaled's user (ie, LocalSystem) and the
Administrators group may access our directory.

We must include Administrators to ensure that logs continue to be easily
accessible; omitting that group would force users to use special tools to
log in interactively as LocalSystem, which is not ideal.

(Note that the ACL we apply matches the ACL that was used for LocalSystem's
AppData\Local).

There are two cases where we need to reset perms: One is during migration
from the old location to the new. The second case is for clean installations
where we are creating the file store for the first time.

Updates #2856

Signed-off-by: Aaron Klotz <aaron@tailscale.com>
3 years ago
Brad Fitzpatrick 4f648e6fcc cmd/tailscaled: disable netns earlier in userspace-networking mode
The earlier 382b349c54 was too late,
as engine creation itself needed to listen on things.

Fixes #2827
Updates #2822

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Brad Fitzpatrick 382b349c54 cmd/tailscaled: disable netns in userspace-networking mode
Updates #2827
Updates #2822

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago
Dave Anderson 980acc38ba
types/key: add a special key with custom serialization for control private keys (#2792)
* Revert "Revert "types/key: add MachinePrivate and MachinePublic.""

This reverts commit 61c3b98a24.

Signed-off-by: David Anderson <danderson@tailscale.com>

* types/key: add ControlPrivate, with custom serialization.

ControlPrivate is just a MachinePrivate that serializes differently
in JSON, to be compatible with how the Tailscale control plane
historically serialized its private key.

Signed-off-by: David Anderson <danderson@tailscale.com>
3 years ago
David Anderson 61c3b98a24 Revert "types/key: add MachinePrivate and MachinePublic."
Broke the tailscale control plane due to surprise different serialization.

This reverts commit 4fdb88efe1.
3 years ago
David Anderson 4fdb88efe1 types/key: add MachinePrivate and MachinePublic.
Plumb throughout the codebase as a replacement for the mixed use of
tailcfg.MachineKey and wgkey.Private/Public.

Signed-off-by: David Anderson <danderson@tailscale.com>
3 years ago
Brad Fitzpatrick 99a1c74a6a metrics: optimize CurrentFDs to not allocate on Linux
It was 50% of our allocs on one of our servers. (!!)

Updates #2784

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
3 years ago