Commit Graph

509 Commits (03a039d48de9e419d47d39df7f297da72c128d8c)

Author SHA1 Message Date
David Anderson 294ceb513c ipn, wgengine/magicsock: fix `tailscale status` display.
Signed-off-by: David Anderson <danderson@tailscale.com>
4 years ago
David Anderson 891110e64c wgengine: expand lazy config to work with dual-stacked peers.
Lazy wg configuration now triggers if a peer has only endpoint
addresses (/32 for IPv4, /128 for IPv6). Subnet routers still
trigger eager configuration to avoid the need for a CIDR match
in the hot packet path.

Signed-off-by: David Anderson <danderson@tailscale.com>
4 years ago
David Anderson c8c493f3d9 wgengine/magicsock: make ReceiveIPv4 a little easier to follow.
The previous code used a lot of whole-function variables and shared
behavior that only triggered based on prior action from a single codepath.
Instead of that, move the small amounts of "shared" code into each switch
case.

Signed-off-by: David Anderson <danderson@tailscale.com>
4 years ago
David Anderson 0ad109f63d wgengine/magicsock: move legacy endpoint creation into legacy.go.
Signed-off-by: David Anderson <danderson@tailscale.com>
4 years ago
David Anderson f873da5b16 wgengine/magicsock: move more legacy endpoint handling.
Signed-off-by: David Anderson <danderson@tailscale.com>
4 years ago
David Anderson 58fcd103c4 wgengine/magicsock: move legacy sending code to legacy.go.
Signed-off-by: David Anderson <danderson@tailscale.com>
4 years ago
David Anderson 65ae66260f wgengine/magicsock: unexport AddrSet.
Signed-off-by: David Anderson <danderson@tailscale.com>
4 years ago
David Anderson c9b9afd761 wgengine/magicsock: move most legacy nat traversal bits to another file.
Signed-off-by: David Anderson <danderson@tailscale.com>
4 years ago
Brad Fitzpatrick 741c513e51 wgengine/tsdns: fix error response marshaling, improve bad query logs
Updates #995

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
4 years ago
David Anderson 554a20becb wgengine/magicsock: only log about lazy config when actually doing lazy config.
Before, tailscaled would log every 10 seconds when the periodic noteRecvActivity
call happens. This is noisy, but worse it's misleading, because the message
suggests that the disco code is starting a lazy config run for a missing peer,
whereas in fact it's just an internal piece of keepalive logic.

With this change, we still log when going from 0->1 tunnel for the peer, but
not every 10s thereafter.

Signed-off-by: David Anderson <danderson@tailscale.com>
4 years ago
Brad Fitzpatrick fa412c8760 wgengine/filter, wgengine/magicsock: use new IP.BitLen to simplify some code 4 years ago
Brad Fitzpatrick afcf134812 wgengine/filter, tailcfg: support CIDRs+ranges in PacketFilter (mapver 7)
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
4 years ago
David Anderson 9cee0bfa8c wgengine/magicsock: sprinkle more docstrings.
Magicsock is too damn big, but this might help me page it back
in faster next time.

Signed-off-by: David Anderson <danderson@tailscale.com>
4 years ago
Josh Bleecher Snyder 6db9c4a173 wgenginer/router/dns: use constant from golang.org/x/sys/windows
Made available in https://golang.org/cl/277153
4 years ago
Aleksandar Pesic 0dc295a640 Isolate WireGuard code into a separate file with appropriate copyright info in header.
Signed-off-by: Aleksandar Pesic <peske.nis@gmail.com>
4 years ago
Aleksandar Pesic d854fe95d2 Trivial change in function description.
Signed-off-by: Aleksandar Pesic <peske.nis@gmail.com>
4 years ago
Aleksandar Pesic 338fd44657 Replace registry-access code, update wireguard-go and x/sys/windows.
Signed-off-by: Aleksandar Pesic <peske.nis@gmail.com>
4 years ago
Aleksandar Pesic 274d32d0aa Prepare for the new wireguard-go API.
Signed-off-by: Aleksandar Pesic <peske.nis@gmail.com>
4 years ago
Brad Fitzpatrick 7b92f8e718 wgengine/magicsock: add start of magicsock benchmarks (Conn.ReceiveIPv4 for now)
And only single-threaded for now. Will get fancier later.

Updates #414
4 years ago
Brad Fitzpatrick 713cbe84c1 wgengine/magicsock: use net.JoinHostPort when host might have colons (udp6)
Only affected tests. (where it just generated log spam)
4 years ago
David Anderson be6fe393c5 wgengine: don't try pinging IPv6 addresses in legacy pinger.
Signed-off-by: David Anderson <danderson@tailscale.com>
4 years ago
Brad Fitzpatrick eccc167733 wgengine/monitor: fix memory corruption in Windows implementation
I used the Windows APIs wrong previously, but it had worked just
enough.

Updates #921

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
4 years ago
Brad Fitzpatrick d9e2edb5ae wgengine: reconfigure wireguard peer in two steps when its disco key changes
First remove the device (to clear its wireguard session key), and then
add it back.

Fixes #929

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
4 years ago
David Anderson 3c508a58cc wgengine/filter: don't filter GCP DNS.
Signed-off-by: David Anderson <danderson@tailscale.com>
4 years ago
Brad Fitzpatrick fc8bc76e58 wgengine/router: lock goroutine to OS thread before using OLE [windows]
See https://github.com/tailscale/tailscale/issues/921#issuecomment-727526807

Not yet sure whether this is our problem, but it can't hurt at least,
and seems like what we're supposed to do.

Updates #921
4 years ago
David Anderson 2eb474dd8d wgengine/filter: add test cases for len(dsts) > 1.
While the code was correct, I broke it during a refactoring and
tests didn't detect it. This fixes that glitch.

Signed-off-by: David Anderson <danderson@tailscale.com>
4 years ago
David Anderson ce45f4f3ff wgengine/filter: inline ip6InList into match.
matchIPsOnly gets 5% slower when inlining, despite significantly reduced
memory ops and slightly tighter code.

Part of #19.

Filter/tcp6_syn_in-8     45.5ns ± 1%    42.4ns ± 2%   -6.86%  (p=0.000 n=10+10)
Filter/udp6_in-8          107ns ± 2%      94ns ± 2%  -11.50%  (p=0.000 n=9+10)

Signed-off-by: David Anderson <danderson@tailscale.com>
4 years ago
David Anderson 3fdae12f0c wgengine/filter: eliminate unnecessary memory loads.
Doesn't materially affect benchmarks, but shrinks match6 by 30 instructions
and halves memory loads.

Part of #19.

Signed-off-by: David Anderson <danderson@tailscale.com>
4 years ago
Josh Bleecher Snyder 47380ebcfb wgengine/filter: twiddle bits to optimize
Part of #19.

name            old time/op    new time/op    delta
Filter/icmp4-8    32.2ns ± 3%    32.5ns ± 2%     ~     (p=0.524 n=10+8)
Filter/icmp6-8    49.7ns ± 6%    43.1ns ± 4%  -13.12%  (p=0.000 n=9+10)

Signed-off-by: David Anderson <danderson@tailscale.com>
4 years ago
David Anderson 5062131aad wgengine/filter: treat * as both a v4 and v6 wildcard.
Part of #19.

Signed-off-by: David Anderson <danderson@tailscale.com>
4 years ago
David Anderson 2d604b3791 net/packet: represent IP6 as two uint64s.
For the operations we perform on these types (mostly net6.Contains),
this encoding is much faster.

Part of #19.

name                   old time/op    new time/op    delta
Filter/icmp4-8           27.5ns ± 1%    28.0ns ± 2%   +1.89%  (p=0.016 n=5+5)
Filter/tcp4_syn_in-8     38.8ns ± 2%    38.3ns ± 1%   -1.24%  (p=0.024 n=5+5)
Filter/tcp4_syn_out-8    27.6ns ±12%    24.6ns ± 1%     ~     (p=0.063 n=5+5)
Filter/udp4_in-8         71.5ns ± 5%    65.9ns ± 1%   -7.94%  (p=0.008 n=5+5)
Filter/udp4_out-8         132ns ±13%     119ns ± 1%  -10.29%  (p=0.008 n=5+5)
Filter/icmp6-8            169ns ±10%      54ns ± 1%  -68.35%  (p=0.008 n=5+5)
Filter/tcp6_syn_in-8      149ns ± 6%      43ns ± 1%  -71.11%  (p=0.008 n=5+5)
Filter/tcp6_syn_out-8    37.7ns ± 4%    24.3ns ± 3%  -35.51%  (p=0.008 n=5+5)
Filter/udp6_in-8          179ns ± 5%     103ns ± 1%  -42.75%  (p=0.008 n=5+5)
Filter/udp6_out-8         156ns ± 3%     191ns ± 1%  +22.54%  (p=0.008 n=5+5)

Signed-off-by: David Anderson <danderson@tailscale.com>
4 years ago
David Anderson 04ff3c91ee wgengine/filter: add full IPv6 support.
Part of #19.

Signed-off-by: David Anderson <danderson@tailscale.com>
4 years ago
David Anderson a664aac877 wgengine/router: disable IPv6 if v6 policy routing is unavailable.
Fixes #895.

Signed-off-by: David Anderson <danderson@tailscale.com>
4 years ago
Brad Fitzpatrick 19b0cfe89e all: prepare for GOOS=ios in Go 1.16
Work with either way for now on iOS (darwin/arm64 vs ios/arm64).

In February when Go 1.16 comes out we'll have a universal binary for
darwin/arm64 (macOS) and will drop support for Go 1.15 and its
darwin/amd64 meaning iOS. (it'll mean macOS).

Context:

* https://tip.golang.org/doc/go1.16#darwin
* https://github.com/golang/go/issues/38485
* https://github.com/golang/go/issues/42100
4 years ago
David Anderson c2cc3acbaf net/packet: remove NewIP, offer only a netaddr constructor.
Signed-off-by: David Anderson <danderson@tailscale.com>
4 years ago
David Anderson 55b1221db2 net/packet: support full IPv6 decoding.
The packet filter still rejects all IPv6, but decodes enough from v6
packets to do something smarter in a followup.

name              time/op
Decode/tcp4-8     28.8ns ± 2%
Decode/tcp6-8     20.6ns ± 1%
Decode/udp4-8     28.2ns ± 1%
Decode/udp6-8     20.0ns ± 6%
Decode/icmp4-8    21.7ns ± 2%
Decode/icmp6-8    14.1ns ± 2%
Decode/unknown-8  9.43ns ± 2%

Signed-off-by: David Anderson <danderson@tailscale.com>
4 years ago
David Anderson 89894c6930 net/packet: add IPv6 source and destination IPs to Parsed.
Signed-off-by: David Anderson <danderson@tailscale.com>
4 years ago
Brad Fitzpatrick 450cfedeba wgengine/magicsock: quiet an IPv6 warning in tests
In tests, we force binding to localhost to avoid OS firewall warning
dialogs.

But for IPv6, we were trying (and failing) to bind to 127.0.0.1.

You'd think we'd just say "localhost", but that's apparently ill
defined. See
https://tools.ietf.org/html/draft-ietf-dnsop-let-localhost-be-localhost
and golang/go#22826. (It's bitten me in the past, but I can't
remember specific bugs.)

So use "::1" explicitly for "udp6", which makes the test quieter.
4 years ago
David Anderson 093431f5dd net/packet: s/ParsedPacket/Parsed/ to avoid package stuttering.
Signed-off-by: David Anderson <danderson@tailscale.com>
4 years ago
David Anderson c48253e63b wgengine/filter: add a method to run the packet filter without a packet.
The goal is to move some of the shenanigans we have elsewhere into the filter
package, so that all the weird things to do with poking at the filter is in
a single place, behind clean APIs.

Signed-off-by: David Anderson <danderson@tailscale.com>
4 years ago
David Anderson 7a54910990 wgengine/filter: remove helper vars, mark NewAllowAll test-only.
Signed-off-by: David Anderson <danderson@tailscale.com>
4 years ago
David Anderson 76d99cf01a wgengine/filter: remove the Matches type.
It only served to obscure the underlying slice type without
adding much value.

Signed-off-by: David Anderson <danderson@tailscale.com>
4 years ago
David Anderson b950bd60bf wgengine/filter: add and clean up documentation.
Signed-off-by: David Anderson <danderson@tailscale.com>
4 years ago
David Anderson a8589636a8 wgengine/filter: remove unused Clone methods.
Signed-off-by: David Anderson <danderson@tailscale.com>
4 years ago
David Anderson b3634f020d wgengine/filter: use netaddr types in public API.
We still use the packet.* alloc-free types in the data path, but
the compilation from netaddr to packet happens within the filter
package.

Signed-off-by: David Anderson <danderson@tailscale.com>
4 years ago
David Anderson 427bf2134f net/packet: rename from wgengine/packet.
Signed-off-by: David Anderson <danderson@tailscale.com>
4 years ago
David Anderson 19df6a2ee2 wgengine/packet: rename types to reflect their v4-only-ness, document.
Signed-off-by: David Anderson <danderson@tailscale.com>
4 years ago
David Anderson ebd96bf4a9 wgengine/router/dns: use OpenKeyWait to set DNS configuration.
Fixes tailscale/corp#839.

Signed-off-by: David Anderson <danderson@tailscale.com>
4 years ago
Brad Fitzpatrick 119101962c wgengine/router: don't double-prefix dns log messages [Windows] 4 years ago
Brad Fitzpatrick 28f6552646 wgengine/router/dns: run ipconfig /registerdns async, log timing
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
4 years ago