tailscale

Commit Graph

Author	SHA1	Message	Date
Andrew Dunham	727acf96a6	net/netcheck: use DERP frames as a signal for home region liveness This uses the fact that we've received a frame from a given DERP region within a certain time as a signal that the region is stil present (and thus can still be a node's PreferredDERP / home region) even if we don't get a STUN response from that region during a netcheck. This should help avoid DERP flaps that occur due to losing STUN probes while still having a valid and active TCP connection to the DERP server. RELNOTE=Reduce home DERP flapping when there's still an active connection Updates #8603 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: If7da6312581e1d434d5c0811697319c621e187a0	7 months ago
Maisem Ali	3aa6468c63	cmd/tailscale/cli: add whois subcommand Initial implementation of a `tailscale whois` subcommand which allows users to observe metadata associated with a Tailscale IP. It also has a `--json` flag to allow consumption programmatically. Updates #4217 Signed-off-by: Maisem Ali <maisem@tailscale.com>	7 months ago
Andrew Lytvynov	d8493d4bd5	clientupdate: add explicit Track to Arguments (#10548 ) Instead of overloading the Version field, add an explicit Track field. This fixes a bug where passing a track name in `args.Version` would keep the track name in `updater.Version` and pass it down the code path to commands like `apt-get install`. Now, `updater.Version` should always be a version (or empty string). Updates #cleanup Signed-off-by: Andrew Lytvynov <awly@tailscale.com>	7 months ago
Andrew Lytvynov	e25f114916	ipn,cmd/tailscale/cli: support hierarchical MaskedPrefs (#10507 ) Some fields if `ipn.Prefs` are structs. `ipn.MaskedPrefs` has a single level of boolean `*Set` flags, which doesn't map well to nested structs within `ipn.Prefs`. Change `MaskedPrefs` and `ApplyEdits` to support `FooSet` struct fields that map to a nested struct of `ipn.Prefs` like `AutoUpdates`. Each struct field in `MaskedPrefs` is just a bundle of more `Set` bool fields or other structs. This allows you to have a `Set` flag for any arbitrarily-nested field of `ipn.Prefs`. Also, make `ApplyEdits` match fields between `Prefs` and `MaskedPrefs` by name instead of order, to make it a bit less finicky. It's probably slower but `ipn.ApplyEdits` should not be in any hot path. As a result, `AutoUpdate.Check` and `AutoUpdate.Apply` fields don't clobber each other when set individually. Updates #16247 Signed-off-by: Andrew Lytvynov <awly@tailscale.com>	7 months ago
Aaron Klotz	0f646937e9	clientupdate: remove TS_NOLAUNCH and GUI restart hacks from autoupdate We've fixed the underlying issue in github.com/tailscale/corp/issues/13998. Fixes #10513 Signed-off-by: Aaron Klotz <aaron@tailscale.com>	7 months ago
Andrew Dunham	3f576fc4ca	ci: run 'go vet' in golangci-lint; fix errors in tests Updates #cleanup Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: Ice78fc907bad24c1de749a1595e212ef2db4b8bb	7 months ago
Naman Sood	0a59754eda	linuxfw,wgengine/route,ipn: add c2n and nodeattrs to control linux netfilter Updates tailscale/corp#14029. Signed-off-by: Naman Sood <mail@nsood.in>	7 months ago
Sonia Appasamy	7a4ba609d9	client/web: show features based on platform support Hiding/disabling UI features when not available on the running client. Updates #10261 Signed-off-by: Sonia Appasamy <sonia@tailscale.com>	7 months ago
Andrew Lytvynov	ac4b416c5b	cmd/tailscale,ipn/ipnlocal: pass available update as health message (#10420 ) To be consistent with the formatting of other warnings, pass available update health message instead of handling ClientVersion in he CLI. Fixes #10312 Signed-off-by: Andrew Lytvynov <awly@tailscale.com>	7 months ago
Andrew Lytvynov	5a9e935597	clientupdate: implement update for Unraid (#10344 ) Use the [`plugin` CLI](https://forums.unraid.net/topic/72240-solved-is-there-a-way-to-installuninstall-plugins-from-script/#comment-676870) to fetch and apply the update. Updates https://github.com/tailscale/tailscale/issues/10184 Signed-off-by: Andrew Lytvynov <awly@tailscale.com>	7 months ago
Jenny Zhang	d5d84f1a68	cmd/tailscale: also warn about IP forwarding if using CLI set We warn users about IP forwarding being disabled when using `--avertise-routes` in `tailscale up`, this adds the same warnings to `tailscale set`. Updates tailscale/corp#9968 Signed-off-by: Jenny Zhang <jz@tailscale.com>	7 months ago
David Anderson	f867392970	cmd/tailscale/cli: add debug function to print the netmap It's possible to do this with a combination of watch-ipn and jq, but looking at the netmap while debugging is quite common, so it's nice to have a one-shot command to get it. Updates #cleanup Signed-off-by: David Anderson <danderson@tailscale.com>	7 months ago
David Anderson	fd22145b52	cmd/tailscale/cli: make 'debug watch-ipn' play nice with jq jq doens't like non-json output in the json stream, and works more happily when the input stream EOFs at some point. Move non-json words to stderr, and add a parameter to stop watching and exit after some number of objects. Updates #cleanup Signed-off-by: David Anderson <danderson@tailscale.com>	7 months ago
Marwan Sulaiman	2dc0645368	ipn/ipnlocal,cmd/tailscale: persist tailnet name in user profile This PR starts to persist the NetMap tailnet name in SetPrefs so that tailscaled clients can use this value to disambiguate fast user switching from one tailnet to another that are under the same exact login. We will also try to backfill this information during backend starts and profile switches so that users don't have to re-authenticate their profile. The first client to use this new information is the CLI in 'tailscale switch -list' which now uses text/tabwriter to display the ID, Tailnet, and Account. Since account names are ambiguous, we allow the user to pass 'tailscale switch ID' to specify the exact tailnet they want to switch to. Updates #9286 Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>	7 months ago
James Tucker	28684b0538	cmd/tailscale/cli: correct app connector help text in set Updates tailscale/corp#15437 Signed-off-by: James Tucker <james@tailscale.com>	7 months ago
Brad Fitzpatrick	3bd382f369	wgengine/magicsock: add DERP homeless debug mode for testing In DERP homeless mode, a DERP home connection is not sought or maintained and the local node is not reachable. Updates #3363 Updates tailscale/corp#396 Change-Id: Ibc30488ac2e3cfe4810733b96c2c9f10a51b8331 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	7 months ago
Sonia Appasamy	2dbd546766	client/web: remove DebugMode from GET /api/data No longer using this! Readonly state fully managed via auth endpoint. Also getting rid of old Legacy server mode. A #cleanup Signed-off-by: Sonia Appasamy <sonia@tailscale.com>	7 months ago
Will Norris	9b537f7c97	ipn: remove the preview-webclient node capability Now that 1.54 has released, and the new web client will be included in 1.56, we can remove the need for the node capability. This means that all 1.55 unstable builds, and then eventually the 1.56 build, will work without setting the node capability. The web client still requires the "webclient" user pref, so this does NOT mean that the web client will be on by default for all devices. Updates tailscale/corp#14335 Signed-off-by: Will Norris <will@tailscale.com>	7 months ago
Will Norris	303a1e86f5	cmd/tailscale: expose --webclient for all builds This removes the dev/unstable build check for the --webclient flag on `tailscale set`, so that it will be included in the next major stable release (1.56) Updates tailscale/corp#14335 Signed-off-by: Will Norris <will@tailscale.com>	7 months ago
Andrew Dunham	e33bc64cff	net/dnsfallback: add singleflight to recursive resolver This prevents running more than one recursive resolution for the same hostname in parallel, which can use excessive amounts of CPU when called in a tight loop. Additionally, add tests that hit the network (when run with a flag) to test the lookup behaviour. Updates tailscale/corp#15261 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I39351e1d2a8782dd4c52cb04b3bd982eb651c81e	7 months ago
Sonia Appasamy	bb31912ea5	cmd/cli: remove --webclient flag from up Causing issues building a stable release. Getting rid of the flag for now because it was only available in unstable, can still be turned on through localapi. A #cleanup Co-authored-by: Will Norris <will@tailscale.com> Signed-off-by: Sonia Appasamy <sonia@tailscale.com>	7 months ago
Andrew Lytvynov	c3f1bd4c0a	clientupdate: fix auto-update on Windows over RDP (#10242 ) `winutil.WTSGetActiveConsoleSessionId` only works for physical desktop logins and does not return the session ID for RDP logins. We need to `windows.WTSEnumerateSessions` and find the active session. Fixes https://github.com/tailscale/corp/issues/15772 Signed-off-by: Andrew Lytvynov <awly@tailscale.com>	7 months ago
Tom DNetto	90a0aafdca	cmd/tailscale: warn if app-connector is enabled without ip forwarding Fixes: ENG-2446 Signed-off-by: Tom DNetto <tom@tailscale.com>	8 months ago
Jordan Whited	12d5c99b04	client/tailscale,ipn/{ipnlocal,localapi}: check UDP GRO config (#10071 ) Updates tailscale/corp#9990 Signed-off-by: Jordan Whited <jordan@tailscale.com>	8 months ago
Will Norris	fdbe511c41	cmd/tailscale: add -webclient flag to up and set Initially, only expose this flag on dev and unstable builds. Updates tailscale/corp#14335 Signed-off-by: Will Norris <will@tailscale.com>	8 months ago
Sonia Appasamy	942d720a16	cli/web: don't block startup on status req If the status request to check for the preview node cap fails, continue with starting up the legacy client. Updates tailscale/corp#14335 Signed-off-by: Sonia Appasamy <sonia@tailscale.com>	8 months ago
Will Norris	7e81c83e64	cmd/tailscale: respect existing web client pref After running `tailscale web`, only disable the user pref if it was not already previously set. Updates tailscale/corp#14335 Signed-off-by: Will Norris <will@tailscale.com>	8 months ago
Sonia Appasamy	0ecfc1d5c3	client/web: fill devMode from an env var Avoids the need to pipe a web client dev flag through the tailscaled command. Updates tailscale/corp#14335 Signed-off-by: Sonia Appasamy <sonia@tailscale.com>	8 months ago
Sonia Appasamy	191e2ce719	client/web: add ServerMode to web.Server Adds a new Mode to the web server, indicating the specific scenario the constructed server is intended to be run in. Also starts filling this from the cli/web and ipn/ipnlocal callers. From cli/web this gets filled conditionally based on whether the preview web client node cap is set. If not set, the existing "legacy" client is served. If set, both a login/lobby and full management client are started (in "login" and "manage" modes respectively). Updates tailscale/corp#14335 Signed-off-by: Sonia Appasamy <sonia@tailscale.com>	8 months ago
James Tucker	ca4c940a4d	ipn: introduce app connector advertisement preference and flags Introduce a preference structure to store the setting for app connector advertisement. Introduce the associated flags: tailscale up --advertise-connector{=true,=false} tailscale set --advertise-connector{=true,=false} ``` % tailscale set --advertise-connector=false % tailscale debug prefs \| jq .AppConnector.Advertise false % tailscale set --advertise-connector=true % tailscale debug prefs \| jq .AppConnector.Advertise true % tailscale up --advertise-connector=false % tailscale debug prefs \| jq .AppConnector.Advertise false % tailscale up --advertise-connector=true % tailscale debug prefs \| jq .AppConnector.Advertise true ``` Updates tailscale/corp#15437 Signed-off-by: James Tucker <james@tailscale.com>	8 months ago
Will Norris	28ad910840	ipn: add user pref for running web client This is not currently exposed as a user-settable preference through `tailscale up` or `tailscale set`. Instead, the preference is set when turning the web client on and off via localapi. In a subsequent commit, the pref will be used to automatically start the web client on startup when appropriate. Updates tailscale/corp#14335 Signed-off-by: Will Norris <will@tailscale.com>	8 months ago
Sonia Appasamy	89953b015b	ipn/ipnlocal,client/web: add web client to tailscaled Allows for serving the web interface from tailscaled, with the ability to start and stop the server via localapi endpoints (/web/start and /web/stop). This will be used to run the new full management web client, which will only be accessible over Tailscale (with an extra auth check step over noise) from the daemon. This switch also allows us to run the web interface as a long-lived service in environments where the CLI version is restricted to CGI, allowing us to manage certain auth state in memory. ipn/ipnlocal/web is stubbed out in ipn/ipnlocal/web_stub for ios builds to satisfy ios restriction from adding "text/template" and "html/template" dependencies. Updates tailscale/corp#14335 Signed-off-by: Sonia Appasamy <sonia@tailscale.com>	8 months ago
Maisem Ali	9107b5eadf	cmd/tailscale/cli: use status before doing interactive feature query We were inconsistent whether we checked if the feature was already enabled which we could do cheaply using the locally available status. We would do the checks fine if we were turning on funnel, but not serve. This moves the cap checks down into enableFeatureInteractive so that are always run. Updates #9984 Co-authored-by: Tyler Smalley <tyler@tailscale.com> Signed-off-by: Maisem Ali <maisem@tailscale.com>	8 months ago
Aaron Klotz	95671b71a6	ipn, safesocket: use Windows token in LocalAPI On Windows, the idiomatic way to check access on a named pipe is for the server to impersonate the client on its current OS thread, perform access checks using the client's access token, and then revert the OS thread's access token back to its true self. The access token is a better representation of the client's rights than just a username/userid check, as it represents the client's effective rights at connection time, which might differ from their normal rights. This patch updates safesocket to do the aforementioned impersonation, extract the token handle, and then revert the impersonation. We retain the token handle for the remaining duration of the connection (the token continues to be valid even after we have reverted back to self). Since the token is a property of the connection, I changed ipnauth to wrap the concrete net.Conn to include the token. I then plumbed that change through ipnlocal, ipnserver, and localapi as necessary. I also added a PermitLocalAdmin flag to the localapi Handler which I intend to use for controlling access to a few new localapi endpoints intended for configuring auto-update. Updates https://github.com/tailscale/tailscale/issues/755 Signed-off-by: Aaron Klotz <aaron@tailscale.com>	8 months ago
Tyler Smalley	131518eed1	cmd/tailscale/cli: improve error when bg serve config is present (#9961 ) We prevent shodow configs when starting a foreground when a background serve config already exists for the serve type and port. This PR improves the messaging to let the user know how to remove the previous config. Updates #8489 ENG-2314 Signed-off-by: Tyler Smalley <tyler@tailscale.com>	8 months ago
Tyler Smalley	1873bc471b	cmd/tailscale/cli: remove http flag for funnel command (#9955 ) The `--http` flag can not be used with Funnel, so we should remove it to remove confusion. Updates #8489 ENG-2316 Signed-off-by: Tyler Smalley <tyler@tailscale.com>	8 months ago
Marwan Sulaiman	5f3cdaf283	cmd/tailscale/cli: chage port flags to uint for serve and funnel This PR changes the -https, -http, -tcp, and -tls-terminated-tcp flags from string to int and also updates the validation to ensure they fit the uint16 size as the flag library does not have a Uint16Var method. Updates #8489 Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>	8 months ago
Marwan Sulaiman	a7e4cebb90	cmd/tailscale/cli: refactor TestServeDevConfigMutations The TestServeDevConfigMutations test has 63 steps that all run under the same scope. This tests breaks them out into isolated subtests that can be run independently. Updates #8489 Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>	8 months ago
Andrew Lytvynov	21b6d373b0	cmd/tailscale/cli: unhide auto-update flags and mark update as Beta (#9954 ) Updates #755 Signed-off-by: Andrew Lytvynov <awly@tailscale.com>	8 months ago
Marwan Sulaiman	f5a7551382	cmd/tailscale: fix help message for serve funnel We currently print out "run tailscale serve --help" when the subcmd might be funnel. This PR ensures the right subcmd is passed. Updates #8489 Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>	8 months ago
Andrew Lytvynov	d3bc575f35	cmd/tailscale/cli: set Sparkle auto-update on macsys (#9952 ) On `tailscale set --auto-update`, set the Sparkle plist option for it. Also make macsys report not supporting auto-updates over c2n, since they will be triggered by Sparkle locally. Updates #755 Signed-off-by: Andrew Lytvynov <awly@tailscale.com>	8 months ago
Tyler Smalley	269a498c1e	cmd/tailscale/cli: serve --set-path should not force background mode (#9905 ) A few people have run into issues with understanding why `--set-path` started in background mode, and/or why they couldn't use a path in foreground mode. This change allows `--set-path` to be used in either case (foreground or background). updates #8489 Signed-off-by: Tyler Smalley <tyler@tailscale.com>	8 months ago
Andrew Lytvynov	593c086866	clientupdate: distinguish when auto-updates are possible (#9896 ) clientupdate.Updater will have a non-nil Update func in a few cases where it doesn't actually perform an update: * on Arch-like distros, where it prints instructions on how to update * on macOS app store version, where it opens the app store page Add a new clientupdate.Arguments field to cause NewUpdater to fail when we hit one of these cases. This results in c2n updates being "not supported" and `tailscale set --auto-update` returning an error. Updates #755 Signed-off-by: Andrew Lytvynov <awly@tailscale.com>	8 months ago
Tyler Smalley	35d7b3aa27	cmd/tailscale/cli: updates help and background messaging (#9929 ) * Fixes issue with template string not being provided in help text * Updates background information to provide full URL, including path, to make it clear the source and destination * Restores some tests * Removes AllowFunnel in ServeConfig if no proxy exists for that port. updates #8489 Signed-off-by: Tyler Smalley <tyler@tailscale.com>	8 months ago
Marwan Sulaiman	c53ee37912	cmd/tailscale: add set-raw to the new serve funnel commands This PR adds the same set-raw from the old flow into the new one so that users can continue to use it when transitioning into the new flow. Updates #8489 Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>	8 months ago
Marwan Sulaiman	f232d4554a	cmd/tailscale: translate old serve commands to new ones This PR fixes the isLegacyInvocation to better catch serve and funnel legacy commands. In addition, it now also returns a string that translates the old command into the new one so that users can have an easier transition story. Updates #8489 Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>	8 months ago
Marwan Sulaiman	60e768fd14	cmd/tailscale: allow serve\|funnel off to delete an entire port This PR allows you to do "tailscale serve -bg -https:4545 off" and it will delete all handlers under it. It will also prompt you for a y/n in case you wanted to delete a single port. Updates #8489 Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>	8 months ago
Tyler Smalley	d9081d6ba2	cmd/tailscale/cli: update serve/funnel CLI help text (#9895 ) updates #8489 ENG-2308 Signed-off-by: Tyler Smalley <tyler@tailscale.com>	8 months ago
Andrew Lytvynov	70f9c8a6ed	clientupdate: change Mac App Store support (#9891 ) In the sandboxed app from the app store, we cannot check `/Library/Preferences/com.apple.commerce.plist` or run `softwareupdate`. We can at most print a helpful message and open the app store page. Also, reenable macsys update function to mark it as supporting c2n updates. macsys support in `tailscale update` was fixed. Updates #755 Signed-off-by: Andrew Lytvynov <awly@tailscale.com>	8 months ago
Joe Tsai	469b7cabad	cmd/tailscale: improve taildrop progress printer on Linux (#9878 ) The progress printer was buggy where it would not print correctly and some of the truncation logic was faulty. The progress printer now prints something like: go1.21.3.linux-amd64.tar.gz 21.53MiB 13.83MiB/s 33.88% ETA 00:00:03 where it shows * the number of bytes transferred so far * the rate of bytes transferred (using a 1-second half-life for an exponentially weighted average) * the progress made as a percentage * the estimated time (as calculated from the rate of bytes transferred) Other changes: * It now correctly prints the progress for very small files * It prints at a faster rate (4Hz instead of 1Hz) * It uses IEC units for byte quantities (to avoid ambiguities of "kb" being kilobits or kilobytes) Updates tailscale/corp#14772 Signed-off-by: Joe Tsai <joetsai@digital-static.net>	8 months ago
Tyler Smalley	7a3ae39025	cmd/tailscale/cli: [serve/funnel] support omitting scheme for TCP (#9856 ) The `serve` command for TCP has always required the scheme of the target to be specified. However, when it's omitted the error message reported is misleading ``` error: failed to apply TCP serve: invalid TCP target "localhost:5900": missing port in address ``` Since we know the target is TCP, we shouldn't require it to be specified. This aligns with the changes for HTTP proxies in https://github.com/tailscale/tailscale/issues/8489 closes #9855 Signed-off-by: Tyler Smalley <tyler@tailscale.com>	8 months ago
Tyler Smalley	35376d52d4	cmd/tailscale/cli: [serve/funnel] provide correct command for disabling (#9859 ) The `off` subcommand removes a serve/funnel for the corresponding type and port. Previously, we were not providing this which would result in an error if someone was using something than the default https=443. closes #9858 Signed-off-by: Tyler Smalley <tyler@tailscale.com>	8 months ago
Andrew Lytvynov	33bb2bbfe9	tailcfg,cmd/tailscale: add UrgentSecurityUpdate flag to ClientVersion (#9848 ) This flag is used in clients to surface urgent updates more prominently. Updates #755 Signed-off-by: Andrew Lytvynov <awly@tailscale.com>	8 months ago
Tyler Smalley	ddb2a6eb8d	cmd/tailscale: promote new serve/funnel CLI to be default (#9833 ) The change is being kept to a minimum to make a revert easy if necessary. After the release, we will go back for a final cleanup. updates #8489 Signed-off-by: Tyler Smalley <tyler@tailscale.com>	8 months ago
Brad Fitzpatrick	18bd98d35b	cmd/tailscaled,*: add start of configuration file support Updates #1412 Co-authored-by: Maisem Ali <maisem@tailscale.com> Change-Id: I38d559c1784d09fc804f521986c9b4b548718f7d Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	8 months ago
James Tucker	96f01a73b1	tailcfg: import ProtoPortRange for local use Imported type and parsing, with minor modifications. Updates tailscale/corp#15043 Signed-off-by: James Tucker <james@tailscale.com>	9 months ago
James Tucker	c1ef55249a	types/ipproto: import and test string parsing for ipproto IPProto has been being converted to and from string formats in multiple locations with variations in behavior. TextMarshaller and JSONMarshaller implementations are now added, along with defined accepted and preferred formats to centralize the logic into a single cross compatible implementation. Updates tailscale/corp#15043 Fixes tailscale/corp#15141 Signed-off-by: James Tucker <james@tailscale.com>	9 months ago
Maisem Ali	9d96e05267	net/packet: split off checksum munging into different pkg The current structure meant that we were embedding netstack in the tailscale CLI and in the GUIs. This removes that by isolating the checksum munging to a different pkg which is only called from `net/tstun`. Fixes #9756 Signed-off-by: Maisem Ali <maisem@tailscale.com>	9 months ago
Sonia Appasamy	7a0de2997e	client/web: remove unused context param from NewServer Updates tailscale/corp#14335 Signed-off-by: Sonia Appasamy <sonia@tailscale.com>	9 months ago
Andrew Lytvynov	677d486830	clientupdate: abort if current version is newer than latest (#9733 ) This is only relevant for unstable releases and local builds. When local version is newer than upstream, abort release. Also, re-add missing newlines in output that were missed in https://github.com/tailscale/tailscale/pull/9694. Updates #cleanup Signed-off-by: Andrew Lytvynov <awly@tailscale.com>	9 months ago
Kristoffer Dalby	623926a25d	cmd/tailscale: add --posture-checking flag to set Updates #5902 Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>	9 months ago
Brad Fitzpatrick	6f36f8842c	cmd/tailscale, magicsock: add debug command to flip DERP homes For testing netmap patchification server-side. Updates #1909 Change-Id: Ib1d784bd97b8d4a31e48374b4567404aae5280cc Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	9 months ago
Andrew Lytvynov	e6aa7b815d	clientupdate,cmd/tailscale/cli: use cli.Stdout/Stderr (#9694 ) In case cli.Stdout/Stderr get overriden, all CLI output should use them instead of os.Stdout/Stderr. Update the `update` command to follow this pattern. Updates #cleanup Signed-off-by: Andrew Lytvynov <awly@tailscale.com>	9 months ago
Andrew Lytvynov	3ee756757b	cmd/tailscale/cli: add update notification to "up" (#9644 ) Add available update message in "tailscale up" output. Also update the message in "tailscale status" to match and mention auto-update. Updates https://github.com/tailscale/tailscale/issues/755 Signed-off-by: Andrew Lytvynov <awly@tailscale.com>	9 months ago
Brad Fitzpatrick	93c6e1d53b	tstest/deptest: add check that x/exp/{maps,slices} imported as xfoo Updates #cleanup Change-Id: I4cbb5e477c739deddf7a46b66f286c9fdb106279 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	9 months ago
Val	73e53dcd1c	cmd/tailscale,ipn/ipnlocal: print debug component names Make the 'tailscale debug component-logs' command print the component names for which extra logging can be turned on, for easier discoverability of debug functions. Updates #cleanup Co-authored-by: Paul Scott <paul@tailscale.com> Signed-off-by: Val <valerie@tailscale.com>	9 months ago
Tom DNetto	656a77ab4e	net/packet: implement methods for rewriting v6 addresses Implements the ability for the address-rewriting code to support rewriting IPv6 addresses. Specifically, UpdateSrcAddr & UpdateDstAddr. Signed-off-by: Tom DNetto <tom@tailscale.com> Updates https://github.com/tailscale/corp/issues/11202	9 months ago
James Tucker	0c8c374a41	go.mod: bump all dependencies except go-billy go-billy is held back at v5.4.1 in order to avoid a newly introduced subdependency that is not compatible with plan9. Updates #8043 Signed-off-by: James Tucker <james@tailscale.com>	9 months ago
Maisem Ali	354455e8be	ipn: use NodeCapMap in CheckFunnel These were missed when adding NodeCapMap and resulted in tsnet binaries not being able to turn on funnel. Fixes #9566 Signed-off-by: Maisem Ali <maisem@tailscale.com>	9 months ago
Marwan Sulaiman	651620623b	ipn/ipnlocal: close foreground sessions on SetServeConfig This PR ensures zombie foregrounds are shutdown if a new ServeConfig is created that wipes the ongoing foreground ones. For example, "tailscale serve\|funnel reset\|off" should close all open sessions. Updates #8489 Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>	9 months ago
Brad Fitzpatrick	04fabcd359	ipn/{ipnlocal,localapi}, cli: add debug force-netmap-update For loading testing & profiling the cost of full netmap updates. Updates #1909 Change-Id: I0afdf5de9967f8d95c7f81d5b531ed1c92c3208f Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	9 months ago
Will Norris	652f77d236	client/web: switch to using prebuilt web client assets Updates tailscale/corp#13775 Co-authored-by: Sonia Appasamy <sonia@tailscale.com> Signed-off-by: Sonia Appasamy <sonia@tailscale.com> Signed-off-by: Will Norris <will@tailscale.com>	9 months ago
Maisem Ali	19a9d9037f	tailcfg: add NodeCapMap Like PeerCapMap, add a field to `tailcfg.Node` which provides a map of Capability to raw JSON messages which are deferred to be parsed later by the application code which cares about the specific capabilities. This effectively allows us to prototype new behavior without having to commit to a schema in tailcfg, and it also opens up the possibilities to develop custom behavior in tsnet applications w/o having to plumb through application specific data in the MapResponse. Updates #4217 Signed-off-by: Maisem Ali <maisem@tailscale.com>	9 months ago
Maisem Ali	4da0689c2c	tailcfg: add Node.HasCap helpers This makes a follow up change less noisy. Updates #cleanup Signed-off-by: Maisem Ali <maisem@tailscale.com>	9 months ago
Marwan Sulaiman	d25217c9db	cmd/tailscale/cli: error when serving foreground if bg already exists This PR fixes a bug to make sure that we don't allow two configs exist with duplicate ports Updates #8489 Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>	9 months ago
Maisem Ali	a61caea911	tailcfg: define a type for NodeCapability Instead of untyped string, add a type to identify these. Updates #cleanup Signed-off-by: Maisem Ali <maisem@tailscale.com>	9 months ago
Tyler Smalley	dfefaa5e35	Use parent serve config Signed-off-by: Tyler Smalley <tyler@tailscale.com>	10 months ago
Marwan Sulaiman	f3a5bfb1b9	cmd/tailscale/cli: add set serve validations This PR adds validations for the new new funnel/serve commands under the following rules: 1. There is always a single config for one port (bg or fg). 2. Foreground configs under the same port cannot co-exists (for now). 3. Background configs can change as long as the serve type is the same. Updates #8489 Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>	10 months ago
Marwan Sulaiman	3421784e37	cmd/tailscale/cli: use optimistic concurrency control on SetServeConfig This PR uses the etag/if-match pattern to ensure multiple calls to SetServeConfig are synchronized. It currently errors out and asks the user to retry but we can add occ retries as a follow up. Updates #8489 Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>	10 months ago
Tyler Smalley	82c1dd8732	cmd/tailscale: funnel wip cleanup and additional test coverage (#9316 ) General cleanup and additional test coverage of WIP code. * use enum for serveType * combine instances of ServeConfig access within unset * cleanMountPoint rewritten into cleanURLPath as it only handles URL paths * refactor and test expandProxyTargetDev > Note > Behind the `TAILSCALE_USE_WIP_CODE` flag updates #8489 Signed-off-by: Tyler Smalley <tyler@tailscale.com>	10 months ago
Brad Fitzpatrick	668a0dd5ab	cmd/tailscale/cli: fix panic in netcheck print when no DERP home Fixes #8016 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	10 months ago
Brad Fitzpatrick	7c1ed38ab3	ipn/ipnlocal: fix missing controlknobs.Knobs plumbing I missed connecting some controlknobs.Knobs pieces in `4e91cf20a8` resulting in that breaking control knobs entirely. Whoops. The fix in ipn/ipnlocal (where it makes a new controlclient) but to atone, I also added integration tests. Those integration tests use a new "tailscale debug control-knobs" which by itself might be useful for future debugging. Updates #9351 Change-Id: Id9c89c8637746d879d5da67b9ac4e0d2367a3f0d Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	10 months ago
Brad Fitzpatrick	4e91cf20a8	control/controlknobs, all: add plumbed Knobs type, not global variables Previously two tsnet nodes in the same process couldn't have disjoint sets of controlknob settings from control as both would overwrite each other's global variables. This plumbs a new controlknobs.Knobs type around everywhere and hangs the knobs sent by control on that instead. Updates #9351 Change-Id: I75338646d36813ed971b4ffad6f9a8b41ec91560 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	10 months ago
Marwan Sulaiman	f12c71e71c	cmd/tailscale: reduce duplicate calls to LocalBackend This PR ensures calls to the LocalBackend are not happening multiples times and ensures the set/unset methods are only manipulating the serve config Updates #8489 Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>	10 months ago
Andrew Lytvynov	d23b8ffb13	cmd/tailscale/cli,ipn: mention available update in "tailscale status" (#9205 ) Cache the last `ClientVersion` value that was received from coordination server and pass it in the localapi `/status` response. When running `tailscale status`, print a message if `RunningAsLatest` is `false`. Updates #6907 Signed-off-by: Andrew Lytvynov <awly@tailscale.com>	10 months ago
Marwan Sulaiman	a1d4144b18	cmd/tailscale: combine foreground and background serve logic Previously, foreground mode only worked in the simple case of `tailscale funnel <port>`. This PR ensures that whatever you can do in the background can also be done in the foreground such as setting mount paths or tcp forwarding. Updates #8489 Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>	10 months ago
Tyler Smalley	70a9854b39	cmd/tailscale: add background mode to serve/funnel wip (#9202 ) > Note > Behind the `TAILSCALE_FUNNEL_DEV` flag * Expose additional listeners through flags * Add a --bg flag to run in the background * --set-path to set a path for a specific target (assumes running in background) See the parent issue for more context. Updates #8489 Signed-off-by: Tyler Smalley <tyler@tailscale.com>	10 months ago
Marwan Sulaiman	50990f8931	ipn, ipn/ipnlocal: add Foreground field for ServeConfig This PR adds a new field to the serve config that can be used to identify which serves are in "foreground mode" and then can also be used to ensure they do not get persisted to disk so that if Tailscaled gets ungracefully shutdown, the reloaded ServeConfig will not have those ports opened. Updates #8489 Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>	10 months ago
Chris Palmer	ac7b4d62fd	cmd/tailscale/cli: make update visible in list (#8662 ) This also makes "HIDDEN: " work (requires the custom UsageFunc). Updates #6995 Signed-off-by: Chris Palmer <cpalmer@tailscale.com>	10 months ago
Sonia Appasamy	f824274093	cli/serve: shorten help text on error Our BETA serve help text is long and often hides the actual error in the user's usage. Instead of printing the full text, prompt users to use `serve --help` if they want the help info. Fixes #14274 Signed-off-by: Sonia Appasamy <sonia@tailscale.com>	10 months ago
Will Norris	9a3bc9049c	client/web,cmd/tailscale: add prefix flag for web command We already had a path on the web client server struct, but hadn't plumbed it through to the CLI. Add that now and use it for Synology and QNAP instead of hard-coding the path. (Adding flag for QNAP is tailscale/tailscale-qpkg#112) This will allow supporting other environments (like unraid) without additional changes to the client/web package. Also fix a small bug in unraid handling to only include the csrf token on POST requests. Updates tailscale/corp#13775 Signed-off-by: Will Norris <will@tailscale.com>	10 months ago
Andrew Lytvynov	34e3450734	cmd/tailscale,ipn: add auto-update flags and prefs (#8861 ) The flags are hidden for now. Adding propagation to tailscaled and persistence only. The prefs field is wrapped in a struct to allow for future expansion (like update schedule). Updates #6907 Signed-off-by: Andrew Lytvynov <awly@tailscale.com>	10 months ago
Tyler Smalley	e1fbb5457b	cmd/tailscale: combine serve and funnel for debug wip funnel stream model (#9169 ) > Note > Behind the `TAILSCALE_USE_WIP_CODE` flag In preparing for incoming CLI changes, this PR merges the code path for the `serve` and `funnel` subcommands. See the parent issue for more context. The following commands will run in foreground mode when using the environment flag. ``` tailscale serve localhost:3000 tailscae funnel localhost:3000 ``` Replaces #9134 Updates #8489 Signed-off-by: Tyler Smalley <tyler@tailscale.com> Signed-off-by: Marwan Sulaiman <marwan@tailscale.com> Co-authored-by: Marwan Sulaiman <marwan@tailscale.com>	10 months ago
Andrew Lytvynov	4e72992900	clientupdate: add linux tarball updates (#9144 ) As a fallback to package managers, allow updating tailscale that was self-installed in some way. There are some tricky bits around updating the systemd unit (should we stick to local binary paths or to the ones in tailscaled.service?), so leaving that out for now. Updates #6995 Signed-off-by: Andrew Lytvynov <awly@tailscale.com>	10 months ago
Chris Palmer	ce1e02096a	ipn/ipnlocal: support most Linuxes in handleC2NUpdate (#9114 ) * ipn/ipnlocal: support most Linuxes in handleC2NUpdate Updates #6995 Signed-off-by: Chris Palmer <cpalmer@tailscale.com>	10 months ago
Brad Fitzpatrick	590c693b96	types/logger: add AsJSON Printing out JSON representation things in log output is pretty common. Updates #cleanup Change-Id: Ife2d2e321a18e6e1185efa8b699a23061ac5e5a4 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	10 months ago
Andrew Lytvynov	8d2eaa1956	clientupdate: download SPK and MSI packages with distsign (#9115 ) Reimplement `downloadURLToFile` using `distsign.Download` and move all of the progress reporting logic over there. Updates #6995 Updates #755 Signed-off-by: Andrew Lytvynov <awly@tailscale.com>	10 months ago
Will Norris	d74c771fda	client/web: always use new web client; remove old client This uses the new react-based web client for all builds, not just with the --dev flag. If the web client assets have not been built, the client will serve a message that Tailscale was built without the web client, and link to build instructions. Because we will include the web client in all of our builds, this should only be seen by developers or users building from source. (And eventually this will be replaced by attempting to download needed assets as runtime.) We do now checkin the build/index.html file, which serves the error message when assets are unavailable. This will also eventually be used to trigger in CI when new assets should be built and uploaded to a well-known location. Updates tailscale/corp#13775 Signed-off-by: Will Norris <will@tailscale.com>	10 months ago
Andrew Dunham	c86a610eb3	cmd/tailscale, net/portmapper: add --log-http option to "debug portmap" This option allows logging the raw HTTP requests and responses that the portmapper Client makes when using UPnP. This can be extremely helpful when debugging strange UPnP issues with users' devices, and might allow us to avoid having to instruct users to perform a packet capture. Updates #8992 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I2c3cf6930b09717028deaff31738484cc9b008e4	10 months ago
Sonia Appasamy	f3077c6ab5	client/web: add self node cache Adds a cached self node to the web client Server struct, which will be used from the web client api to verify that request came from the node's own machine (i.e. came from the web client frontend). We'll be using when we switch the web client api over to acting as a proxy to the localapi, to protect against DNS rebinding attacks. Updates tailscale/corp#13775 Signed-off-by: Sonia Appasamy <sonia@tailscale.com>	10 months ago

1 2 3 4 5 ...

832 Commits (release-branch/1.64)