tailscale

Commit Graph

Author	SHA1	Message	Date
Brad Fitzpatrick	964282d34f	ipn,wgengine: remove vestigial Prefs.AllowSingleHosts It was requested by the first customer 4-5 years ago and only used for a brief moment of time. We later added netmap visibility trimming which removes the need for this. It's been hidden by the CLI for quite some time and never documented anywhere else. This keeps the CLI flag, though, out of caution. It just returns an error if it's set to anything but true (its default). Fixes #12058 Change-Id: I7514ba572e7b82519b04ed603ff9f3bdbaecfda7 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	10 hours ago
James Tucker	8d1249550a	net/netcheck,wgengine/magicsock: add potential workaround for Palo Alto DIPP misbehavior Palo Alto firewalls have a typically hard NAT, but also have a mode called Persistent DIPP that is supposed to provide consistent port mapping suitable for STUN resolution of public ports. Persistent DIPP works initially on most Palo Alto firewalls, but some models/software versions have a bug which this works around. The bug symptom presents as follows: - STUN sessions resolve a consistent public IP:port to start with - Much later netchecks report the same IP:Port for a subset of sessions, most often the users active DERP, and/or the port related to sustained traffic. - The broader set of DERPs in a full netcheck will now consistently observe a new IP:Port. - After this point of observation, new inbound connections will only succeed to the new IP:Port observed, and existing/old sessions will only work to the old binding. In this patch we now advertise the lowest latency global endpoint discovered as we always have, but in addition any global endpoints that are observed more than once in a single netcheck report. This should provide viable endpoints for potential connection establishment across a NAT with this behavior. Updates tailscale/corp#19106 Signed-off-by: James Tucker <james@tailscale.com>	21 hours ago
Andrea Gottardo	e5f67f90a2	xcode: allow ICMP ping relay on macOS + iOS platforms (#12048 ) Fixes tailscale/tailscale#10393 Fixes tailscale/corp#15412 Fixes tailscale/corp#19808 On Apple platforms, exit nodes and subnet routers have been unable to relay pings from Tailscale devices to non-Tailscale devices due to sandbox restrictions imposed on our network extensions by Apple. The sandbox prevented the code in netstack.go from spawning the `ping` process which we were using. Replace that exec call with logic to send an ICMP echo request directly, which appears to work in userspace, and not trigger a sandbox violation in the syslog. Signed-off-by: Andrea Gottardo <andrea@gottardo.me>	2 days ago
Claire Wang	e070af7414	ipnlocal, magicsock: add more description to storing last suggested exit (#11998 ) node related functions Updates tailscale/corp#19681 Signed-off-by: Claire Wang <claire@tailscale.com>	1 week ago
Andrew Dunham	5708fc0639	wgengine/router: print Docker warning when stateful filtering is enabled When Docker is detected on the host and stateful filtering is enabled, Docker containers may be unable to reach Tailscale nodes (depending on the network settings of a container). Detect Docker when stateful filtering is enabled and print a health warning to aid users in noticing this issue. We avoid printing the warning if the current node isn't advertising any subnet routes and isn't an exit node, since without one of those being true, the node wouldn't have the correct AllowedIPs in WireGuard to allow a Docker container to connect to another Tailscale node anyway. Updates #12070 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: Idef538695f4d101b0ef6f3fb398c0eaafc3ae281	1 week ago
Andrew Dunham	8f7f9ac17e	wgengine/netstack: handle 4via6 routes that are advertised by the same node Previously, a node that was advertising a 4via6 route wouldn't be able to make use of that same route; the packet would be delivered to Tailscale, but since we weren't accepting it in handleLocalPackets, the packet wouldn't be delivered to netstack and would never hit the 4via6 logic. Let's add that support so that usage of 4via6 is consistent regardless of where the connection is initiated from. Updates #11304 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: Ic28dc2e58080d76100d73b93360f4698605af7cb	1 week ago
Brad Fitzpatrick	21509db121	ipn/ipnlocal, all: plumb health trackers in tests I saw some panics in CI, like: 2024-05-08T04:30:25.9553518Z ## WARNING: (non-fatal) nil health.Tracker (being strict in CI): 2024-05-08T04:30:25.9554043Z goroutine 801 [running]: 2024-05-08T04:30:25.9554489Z tailscale.com/health.(Tracker).nil(0x0) 2024-05-08T04:30:25.9555086Z tailscale.com/health/health.go:185 +0x70 2024-05-08T04:30:25.9555688Z tailscale.com/health.(Tracker).SetUDP4Unbound(0x0, 0x0) 2024-05-08T04:30:25.9556373Z tailscale.com/health/health.go:532 +0x2f 2024-05-08T04:30:25.9557296Z tailscale.com/wgengine/magicsock.(Conn).bindSocket(0xc0003b4808, 0xc0003b4878, {0x1fbca53, 0x4}, 0x0) 2024-05-08T04:30:25.9558301Z tailscale.com/wgengine/magicsock/magicsock.go:2481 +0x12c5 2024-05-08T04:30:25.9559026Z tailscale.com/wgengine/magicsock.(Conn).rebind(0xc0003b4808, 0x0) 2024-05-08T04:30:25.9559874Z tailscale.com/wgengine/magicsock/magicsock.go:2510 +0x16f 2024-05-08T04:30:25.9561038Z tailscale.com/wgengine/magicsock.NewConn({0xc000063c80, 0x0, 0xc000197930, 0xc000197950, 0xc000197960, {0x0, 0x0}, 0xc000197970, 0xc000198ee0, 0x0, ...}) 2024-05-08T04:30:25.9562402Z tailscale.com/wgengine/magicsock/magicsock.go:476 +0xd5f 2024-05-08T04:30:25.9563779Z tailscale.com/wgengine.NewUserspaceEngine(0xc000063c80, {{0x22c8750, 0xc0001976b0}, 0x0, {0x22c3210, 0xc000063c80}, {0x22c31d8, 0x2d3c900}, 0x0, 0x0, ...}) 2024-05-08T04:30:25.9564982Z tailscale.com/wgengine/userspace.go:389 +0x159d 2024-05-08T04:30:25.9565529Z tailscale.com/ipn/ipnlocal.newTestBackend(0xc000358b60) 2024-05-08T04:30:25.9566086Z tailscale.com/ipn/ipnlocal/serve_test.go:675 +0x2a5 2024-05-08T04:30:25.9566612Z ta Updates #11874 Change-Id: I3432ed52d670743e532be4642f38dbd6e3763b1b Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 week ago
Maisem Ali	af97e7a793	tailcfg,all: add/plumb Node.IsJailed This adds a new bool that can be sent down from control to do jailing on the client side. Previously this would only be done from control by modifying the packet filter we sent down to clients. This would result in a lot of additional work/CPU on control, we could instead just do this on the client. This has always been a TODO which we keep putting off, might as well do it now. Updates tailscale/corp#19623 Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 weeks ago
Maisem Ali	e67069550b	ipn/ipnlocal,net/tstun,wgengine: create and plumb jailed packet filter This plumbs a packet filter for jailed nodes through to the tstun.Wrapper; the filter for a jailed node is equivalent to a "shields up" filter. Currently a no-op as there is no way for control to tell the client whether a peer is jailed. Updates tailscale/corp#19623 Co-authored-by: Andrew Dunham <andrew@du.nham.ca> Signed-off-by: Maisem Ali <maisem@tailscale.com> Change-Id: I5ccc5f00e197fde15dd567485b2a99d8254391ad	2 weeks ago
Andrew Lytvynov	c28f5767bf	various: implement stateful firewalling on Linux (#12025 ) Updates https://github.com/tailscale/corp/issues/19623 Change-Id: I7980e1fb736e234e66fa000d488066466c96ec85 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Co-authored-by: Andrew Dunham <andrew@du.nham.ca>	2 weeks ago
Claire Wang	35872e86d2	ipnlocal, magicsock: store last suggested exit node id in local backend (#11959 ) Updates tailscale/corp#19681 Signed-off-by: Claire Wang <claire@tailscale.com>	2 weeks ago
Brad Fitzpatrick	46f3feae96	ssh/tailssh: plumb health.Tracker in test In prep for it being required in more places. Updates #11874 Change-Id: Ib743205fc2a6c6ff3d2c4ed3a2b28cac79156539 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 weeks ago
Claire Wang	e0287a4b33	wgengine: add exit destination logging enable for wgengine logger (#11952 ) Updates tailscale/corp#18625 Co-authored-by: Kevin Liang <kevinliang@tailscale.com> Signed-off-by: Claire Wang <claire@tailscale.com>	2 weeks ago
Andrew Dunham	b2b49cb3d5	wgengine/wgcfg/nmcfg: skip expired peers Updates tailscale/corp#19315 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I1ad0c8796efe3dd456280e51efaf81f6d2049772	3 weeks ago
Brad Fitzpatrick	b9adbe2002	net/{interfaces,netmon}, all: merge net/interfaces package into net/netmon In prep for most of the package funcs in net/interfaces to become methods in a long-lived netmon.Monitor that can cache things. (Many of the funcs are very heavy to call regularly, whereas the long-lived netmon.Monitor can subscribe to things from the OS and remember answers to questions it's asked regularly later) Updates tailscale/corp#10910 Updates tailscale/corp#18960 Updates #7967 Updates #3299 Change-Id: Ie4e8dedb70136af2d611b990b865a822cd1797e5 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 weeks ago
Brad Fitzpatrick	3672f29a4e	net/netns, net/dns/resolver, etc: make netmon required in most places The goal is to move more network state accessors to netmon.Monitor where they can be cheaper/cached. But first (this change and others) we need to make sure the one netmon.Monitor is plumbed everywhere. Some notable bits: * tsdial.NewDialer is added, taking a now-required netmon * because a tsdial.Dialer always has a netmon, anything taking both a Dialer and a NetMon is now redundant; take only the Dialer and get the NetMon from that if/when needed. * netmon.NewStatic is added, primarily for tests Updates tailscale/corp#10910 Updates tailscale/corp#18960 Updates #7967 Updates #3299 Change-Id: I877f9cb87618c4eb037cee098241d18da9c01691 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 weeks ago
Brad Fitzpatrick	7a62dddeac	net/netcheck, wgengine/magicsock: make netmon.Monitor required This has been a TODO for ages. Time to do it. The goal is to move more network state accessors to netmon.Monitor where they can be cheaper/cached. Updates tailscale/corp#10910 Updates tailscale/corp#18960 Updates #7967 Updates #3299 Change-Id: I60fc6508cd2d8d079260bda371fc08b6318bcaf1 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 weeks ago
Brad Fitzpatrick	7f587d0321	health, wgengine/magicsock: remove last of health package globals Fixes #11874 Updates #4136 Change-Id: Ib70e6831d4c19c32509fe3d7eee4aa0e9f233564 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 weeks ago
Brad Fitzpatrick	745931415c	health, all: remove health.Global, finish plumbing health.Tracker Updates #11874 Updates #4136 Change-Id: I414470f71d90be9889d44c3afd53956d9f26cd61 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 weeks ago
Brad Fitzpatrick	6d69fc137f	ipn/{ipnlocal,localapi},wgengine{,/magicsock}: plumb health.Tracker Down to 25 health.Global users. After this remains controlclient & net/dns & wgengine/router. Updates #11874 Updates #4136 Change-Id: I6dd1856e3d9bf523bdd44b60fb3b8f7501d5dc0d Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 weeks ago
Brad Fitzpatrick	723c775dbb	tsd, ipnlocal, etc: add tsd.System.HealthTracker, start some plumbing This adds a health.Tracker to tsd.System, accessible via a new tsd.System.HealthTracker method. In the future, that new method will return a tsd.System-specific HealthTracker, so multiple tsnet.Servers in the same process are isolated. For now, though, it just always returns the temporary health.Global value. That permits incremental plumbing over a number of changes. When the second to last health.Global reference is gone, then the tsd.System.HealthTracker implementation can return a private Tracker. The primary plumbing this does is adding it to LocalBackend and its dozen and change health calls. A few misc other callers are also plumbed. Subsequent changes will flesh out other parts of the tree (magicsock, controlclient, etc). Updates #11874 Updates #4136 Change-Id: Id51e73cfc8a39110425b6dc19d18b3975eac75ce Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 weeks ago
Brad Fitzpatrick	5b32264033	health: break Warnable into a global and per-Tracker value halves Previously it was both metadata about the class of warnable item as well as the value. Now it's only metadata and the value is per-Tracker. Updates #11874 Updates #4136 Change-Id: Ia1ed1b6c95d34bc5aae36cffdb04279e6ba77015 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 weeks ago
Brad Fitzpatrick	ebc552d2e0	health: add Tracker type, in prep for removing global variables This moves most of the health package global variables to a new `health.Tracker` type. But then rather than plumbing the Tracker in tsd.System everywhere, this only goes halfway and makes one new global Tracker (`health.Global`) that all the existing callers now use. A future change will eliminate that global. Updates #11874 Updates #4136 Change-Id: I6ee27e0b2e35f68cb38fecdb3b2dc4c3f2e09d68 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 weeks ago
Percy Wegmann	c8e912896e	wgengine/router: consolidate routes before reconfiguring router for mobile clients This helps reduce memory pressure on tailnets with large numbers of routes. Updates tailscale/corp#19332 Signed-off-by: Percy Wegmann <percy@tailscale.com>	4 weeks ago
Irbe Krumina	3af0f526b8	cmd{containerboot,k8s-operator},util/linuxfw: support ExternalName Services (#11802 ) * cmd/containerboot,util/linuxfw: support proxy backends specified by DNS name Adds support for optionally configuring containerboot to proxy traffic to backends configured by passing TS_EXPERIMENTAL_DEST_DNS_NAME env var to containerboot. Containerboot will periodically (every 10 minutes) attempt to resolve the DNS name and ensure that all traffic sent to the node's tailnet IP gets forwarded to the resolved backend IP addresses. Currently: - if the firewall mode is iptables, traffic will be load balanced accross the backend IP addresses using round robin. There are no health checks for whether the IPs are reachable. - if the firewall mode is nftables traffic will only be forwarded to the first IP address in the list. This is to be improved. * cmd/k8s-operator: support ExternalName Services Adds support for exposing endpoints, accessible from within a cluster to the tailnet via DNS names using ExternalName Services. This can be done by annotating the ExternalName Service with tailscale.com/expose: "true" annotation. The operator will deploy a proxy configured to route tailnet traffic to the backend IPs that service.spec.externalName resolves to. The backend IPs must be reachable from the operator's namespace. Updates tailscale/tailscale#10606 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	4 weeks ago
Nick Khyl	9e1c86901b	wgengine\router: fix the Tailscale-In firewall rule to work on domain networks The Network Location Awareness service identifies networks authenticated against an Active Directory domain and categorizes them as "Domain Authenticated". This includes the Tailscale network if a Domain Controller is reachable through it. If a network is categories as NLM_NETWORK_CATEGORY_DOMAIN_AUTHENTICATED, it is not possible to override its category, and we shouldn't attempt to do so. Additionally, our Windows Firewall rules should be compatible with both private and domain networks. This fixes both issues. Fixes #11813 Signed-off-by: Nick Khyl <nickk@tailscale.com>	4 weeks ago
Brad Fitzpatrick	03d5d1f0f9	wgengine/magicsock: disable portmapper in tunchan-faked tests Most of the magicsock tests fake the network, simulating packets going out and coming in. There's no reason to actually hit your router to do UPnP/NAT-PMP/PCP during in tests. But while debugging thousands of iterations of tests to deflake some things, I saw it slamming my router. This stops that. Updates #11762 Change-Id: I59b9f48f8f5aff1fa16b4935753d786342e87744 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 month ago
Brad Fitzpatrick	7c1d6e35a5	all: use Go 1.22 range-over-int Updates #11058 Change-Id: I35e7ef9b90e83cac04ca93fd964ad00ed5b48430 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 month ago
Brad Fitzpatrick	0fba9e7570	cmd/tailscale/cli: prevent concurrent Start calls in 'up' Seems to deflake tstest/integration tests. I can't reproduce it anymore on one of my VMs that was consistently flaking after a dozen runs before. Now I can run hundreds of times. Updates #11649 Fixes #7036 Change-Id: I2f7d4ae97500d507bdd78af9e92cd1242e8e44b8 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 month ago
Brad Fitzpatrick	dd6c76ea24	ipn: remove unused Options.LegacyMigrationPrefs I'm on a mission to simplify LocalBackend.Start and its locking and deflake some tests. I noticed this hasn't been used since March 2023 when it was removed from the Windows client in corp 66be796d33c. So, delete. Updates #11649 Change-Id: I40f2cb75fb3f43baf23558007655f65a8ec5e1b2 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 month ago
Claire Wang	9171b217ba	cmd/tailscale, ipn/ipnlocal: add suggest exit node CLI option (#11407 ) Updates tailscale/corp#17516 Signed-off-by: Claire Wang <claire@tailscale.com>	1 month ago
Charlotte Brandhorst-Satzkorn	449f46c207	wgengine/magicsock: rebind/restun if a syscall.EPERM error is returned (#11711 ) We have seen in macOS client logs that the "operation not permitted", a syscall.EPERM error, is being returned when traffic is attempted to be sent. This may be caused by security software on the client. This change will perform a rebind and restun if we receive a syscall.EPERM error on clients running darwin. Rebinds will only be called if we haven't performed one specifically for an EPERM error in the past 5 seconds. Updates #11710 Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>	1 month ago
Brad Fitzpatrick	952e06aa46	wgengine/router: don't attempt route cleanup on Synology Trying to run iptables/nftables on Synology pauses for minutes with lots of errors and ultimately does nothing as it's not used and we lack permissions. This fixes a regression from `db760d0bac` (#11601) that landed between Synology testing on unstable 1.63.110 and 1.64.0 being cut. Fixes #11737 Change-Id: Iaf9563363b8e45319a9b6fe94c8d5ffaecc9ccef Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 month ago
James Tucker	a2eb1c22b0	wgengine/magicsock: allow disco communication without known endpoints Just because we don't have known endpoints for a peer does not mean that the peer should become unreachable. If we know the peers key, it should be able to call us, then we can talk back via whatever path it called us on. First step - don't drop the packet in this context. Updates tailscale/corp#19106 Signed-off-by: James Tucker <james@tailscale.com>	1 month ago
James Tucker	db760d0bac	cmd/tailscaled: move cleanup to an implicit action during startup This removes a potentially increased boot delay for certain boot topologies where they block on ExecStartPre that may have socket activation dependencies on other system services (such as systemd-resolved and NetworkManager). Also rename cleanup to clean up in affected/immediately nearby places per code review commentary. Fixes #11599 Signed-off-by: James Tucker <james@tailscale.com>	1 month ago
Maisem Ali	3f4c5daa15	wgengine/netstack: remove SubnetRouterWrapper It was used when we only supported subnet routers on linux and would nil out the SubnetRoutes slice as no other router worked with it, but now we support subnet routers on ~all platforms. The field it was setting to nil is now only used for network logging and nowhere else, so keep the field but drop the SubnetRouterWrapper as it's not useful. Updates #cleanup Change-Id: Id03f9b6ec33e47ad643e7b66e07911945f25db79 Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 month ago
James Tucker	6e334e64a1	net/netcheck,wgengine/magicsock: align DERP frame receive time heuristics The netcheck package and the magicksock package coordinate via the health package, but both sides have time based heuristics through indirect dependencies. These were misaligned, so the implemented heuristic aimed at reducing DERP moves while there is active traffic were non-operational about 3/5ths of the time. It is problematic to setup a good test for this integration presently, so instead I added comment breadcrumbs along with the initial fix. Updates #8603 Signed-off-by: James Tucker <james@tailscale.com>	1 month ago
Joonas Kuorilehto	fe0cfec4ad	wgengine/router: enable ip forwarding on gokrazy Only on Gokrazy, set sysctls to enable IP forwarding so subnet routing and advertised exit node works. Fixes #11405 Signed-off-by: Joonas Kuorilehto <joneskoo@derbian.fi>	1 month ago
Percy Wegmann	853e3e29a0	wgengine/router: provide explicit hook to signal Android when VPN needs to be reconfigured This allows clients to avoid establishing their VPN multiple times when both routes and DNS are changing in rapid succession. Updates tailscale/corp#18928 Signed-off-by: Percy Wegmann <percy@tailscale.com>	1 month ago
Charlotte Brandhorst-Satzkorn	93618a3518	tailscale: update tailfs functions and vars to use drive naming (#11597 ) This change updates all tailfs functions and the majority of the tailfs variables to use the new drive naming. Updates tailscale/corp#16827 Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>	1 month ago
Charlotte Brandhorst-Satzkorn	14683371ee	tailscale: update tailfs file and package names (#11590 ) This change updates the tailfs file and package names to their new naming convention. Updates #tailscale/corp#16827 Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>	2 months ago
Irbe Krumina	5fb721d4ad	util/linuxfw,wgengine/router: skip IPv6 firewall configuration in partial iptables mode (#11546 ) We have hosts that support IPv6, but not IPv6 firewall configuration in iptables mode. We also have hosts that have some support for IPv6 firewall configuration in iptables mode, but do not have iptables filter table. We should: - configure ip rules for all hosts that support IPv6 - only configure firewall rules in iptables mode if the host has iptables filter table. Updates tailscale/tailscale#11540 Signed-off-by: Irbe Krumina <irbe@tailscale.com>	2 months ago
Brad Fitzpatrick	a36cfb4d3d	tailcfg, ipn/ipnlocal, wgengine/magicsock: add only-tcp-443 node attr Updates tailscale/corp#17879 Change-Id: I0dc305d147b76c409cf729b599a94fa723aef0e0 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 months ago
James Tucker	3f7313dbdb	util/linuxfw,wgengine/router: enable IPv6 configuration when netfilter is disabled Updates #11434 Signed-off-by: James Tucker <james@tailscale.com>	2 months ago
Joe Tsai	85febda86d	all: use zstdframe where sensible (#11491 ) Use the zstdframe package where sensible instead of plumbing around our own zstd.Encoder just for stateless operations. This causes logtail to have a dependency on zstd, but that's arguably okay since zstd support is implicit to the protocol between a client and the logging service. Also, virtually every caller to logger.NewLogger was manually setting up a zstd.Encoder anyways, meaning that zstd was functionally always a dependency. Updates #cleanup Updates tailscale/corp#18514 Signed-off-by: Joe Tsai <joetsai@digital-static.net>	2 months ago
Brad Fitzpatrick	5d1c72f76b	wgengine/magicsock: don't use endpoint debug ringbuffer on mobile. Save some memory. Updates tailscale/corp#18514 Change-Id: Ibcaf3c6d8e5cc275c81f04141d0f176e2249509b Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 months ago
Andrew Dunham	6da1dc84de	wgengine: fix logger data race in tests Observed in: https://github.com/tailscale/tailscale/actions/runs/8350904950/job/22858266932?pr=11463 Updates #11226 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I9b57db4b34b6ad91d240cd9fa7e344fc0376d52d	2 months ago
Andrew Dunham	7429e8912a	wgengine/netstack: fix bug with duplicate SYN packets in client limit This fixes a bug that was introduced in #11258 where the handling of the per-client limit didn't properly account for the fact that the gVisor TCP forwarder will return 'true' to indicate that it's handled a duplicate SYN packet, but not launch the handler goroutine. In such a case, we neither decremented our per-client limit in the wrapper function, nor did we do so in the handler function, leading to our per-client limit table slowly filling up without bound. Fix this by doing the same duplicate-tracking logic that the TCP forwarder does so we can detect such cases and appropriately decrement our in-flight counter. Updates tailscale/corp#12184 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: Ib6011a71d382a10d68c0802593f34b8153d06892	2 months ago
Andrew Dunham	f072d017bd	wgengine/magicsock: don't change DERP home when not connected to control This pretty much always results in an outage because peers won't discover our new home region and thus won't be able to establish connectivity. Updates tailscale/corp#18095 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: Ic0d09133f198b528dd40c6383b16d7663d9d37a7	2 months ago
Andrew Dunham	62cf83eb92	go.mod: bump gvisor The `stack.PacketBufferPtr` type no longer exists; replace it with `*stack.PacketBuffer` instead. Updates #8043 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: Ib56ceff09166a042aa3d9b80f50b2aa2d34b3683	2 months ago

1 2 3 4 5 ...

1518 Commits (main)