tailscale

Commit Graph

Author	SHA1	Message	Date
Maisem Ali	4a8cb1d9f3	all: use math/rand/v2 more Updates #11058 Signed-off-by: Maisem Ali <maisem@tailscale.com>	6 months ago
Brad Fitzpatrick	7c1d6e35a5	all: use Go 1.22 range-over-int Updates #11058 Change-Id: I35e7ef9b90e83cac04ca93fd964ad00ed5b48430 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	7 months ago
Joe Tsai	7732377cd7	tstime/rate: implement Value.{Marshal,Unmarshal}JSON (#8481 ) Implement support for marshaling and unmarshaling a Value. Updates tailscale/corp#8427 Signed-off-by: Joe Tsai <joetsai@digital-static.net>	10 months ago
Andrew Lytvynov	1302bd1181	all: cleanup unused code, part 1 (#10661 ) Run `staticcheck` with `U1000` to find unused code. This cleans up about a half of it. I'll do the other half separately to keep PRs manageable. Updates #cleanup Signed-off-by: Andrew Lytvynov <awly@tailscale.com>	11 months ago
Joe Tsai	1a78f240b5	tstime: add DefaultClock (#9691 ) In almost every single use of Clock, there is a default behavior we want to use when the interface is nil, which is to use the the standard time package. The Clock interface exists only for testing, and so tests that care about mocking time can adequately plumb the the Clock down the stack and through various data structures. However, the problem with Clock is that there are many situations where we really don't care about mocking time (e.g., measuring execution time for a log message), where making sure that Clock is non-nil is not worth the burden. In fact, in a recent refactoring, the biggest pain point was dealing with nil-interface panics when calling tstime.Clock methods where mocking time wasn't even needed for the relevant tests. This required wasted time carefully reviewing the code to make sure that tstime.Clock was always populated, and even then we're not statically guaranteed to avoid a nil panic. Ideally, what we want are default methods on Go interfaces, but such a language construct does not exist. However, we can emulate that behavior by declaring a concrete type that embeds the interface. If the underlying interface value is nil, it provides some default behavior (i.e., use StdClock). This provides us a nice balance of two goals: * We can plumb tstime.DefaultClock in all relevant places for use with mocking time in the tests that care. * For all other logic that don't care about, we never need to worry about whether tstime.DefaultClock is nil or not. This is especially relevant in production code where we don't want to panic. Longer-term, we may want to perform a large-scale change where we rename Clock to ClockInterface and rename DefaultClock to just Clock. Updates #cleanup Signed-off-by: Joe Tsai <joetsai@digital-static.net>	1 year ago
Brad Fitzpatrick	a1b8d703d6	tstime/mono: remove unsafe This removes the unsafe/linkname and only uses the standard library. It's a bit slower, for now, but https://go.dev/cl/518336 should get us back. On darwin/arm64, without https://go.dev/cl/518336 pkg: tailscale.com/tstime/mono │ before │ after │ │ sec/op │ sec/op vs base │ MonoNow-8 16.20n ± 0% 19.75n ± 0% +21.92% (p=0.000 n=10) TimeNow-8 39.46n ± 0% 39.40n ± 0% -0.16% (p=0.002 n=10) geomean 25.28n 27.89n +10.33% And with it, MonoNow-8 16.34n ± 1% 16.93n ± 0% +3.67% (p=0.001 n=10) TimeNow-8 39.55n ± 15% 38.46n ± 1% -2.76% (p=0.000 n=10) geomean 25.42n 25.52n +0.41% Updates #8839 Updates tailscale/go#70 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Claire Wang	0573f6e953	tstime: add Since method (#8622 ) Updates #8463 Signed-off-by: Claire Wang <claire@tailscale.com>	1 year ago
Adrian Dewhurst	92fb80d55f	tstest, tstime: mockable timers and tickers This change introduces tstime.Clock which is the start of a mockable interface for use with testing other upcoming code changes. Fixes #8463 Change-Id: I59eabc797828809194575736615535d918242ec4 Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>	1 year ago
Joe Tsai	e42be5a060	tstime/mono: fix Time.Unmarshal (#8480 ) Calling both mono.Now() and time.Now() is slow and leads to unnecessary precision errors. Instead, directly compute mono.Time relative to baseMono and baseWall. This is the opposite calculation as mono.Time.WallTime. Updates tailscale/corp#8427 Signed-off-by: Joe Tsai <joetsai@digital-static.net>	1 year ago
Joe Tsai	87b4bbb94f	tstime/rate: add Value (#7491 ) Add Value, which measures the rate at which an event occurs, exponentially weighted towards recent activity. It is guaranteed to occupy O(1) memory, operate in O(1) runtime, and is safe for concurrent use. Signed-off-by: Joe Tsai <joetsai@digital-static.net>	2 years ago
Joe Tsai	7e6c5a2db4	tstime: rely on stdlib parse functionality (#7482 ) The time.Parse function has been optimized to the point where it is faster than our custom implementation. See upstream changes in: * https://go.dev/cl/429862 * https://go.dev/cl/425197 * https://go.dev/cl/425116 Performance: BenchmarkGoParse3339/Z 38.75 ns/op 0 B/op 0 allocs/op BenchmarkGoParse3339/TZ 54.02 ns/op 0 B/op 0 allocs/op BenchmarkParse3339/Z 40.17 ns/op 0 B/op 0 allocs/op BenchmarkParse3339/TZ 87.06 ns/op 0 B/op 0 allocs/op We can see that the stdlib implementation is now faster. Signed-off-by: Joe Tsai <joetsai@digital-static.net>	2 years ago
Joe Tsai	9112e78925	tstime: add Sleep (#7480 ) Sleep is an interruptible sleep variation. Signed-off-by: Joe Tsai <joetsai@digital-static.net>	2 years ago
Will Norris	71029cea2d	all: update copyright and license headers This updates all source files to use a new standard header for copyright and license declaration. Notably, copyright no longer includes a date, and we now use the standard SPDX-License-Identifier header. This commit was done almost entirely mechanically with perl, and then some minimal manual fixes. Updates #6865 Signed-off-by: Will Norris <will@tailscale.com>	2 years ago
Joe Tsai	ec1e67b1ab	tstime: fix ParseDuration for '6' digit (#6363 ) The cutset provided to strings.TrimRight was missing the digit '6', making it such that we couldn't parse something like "365d". Signed-off-by: Joe Tsai <joetsai@digital-static.net>	2 years ago
Brad Fitzpatrick	da8def8e13	all: remove old +build tags The //go:build syntax was introduced in Go 1.17: https://go.dev/doc/go1.17#build-lines gofmt has kept the +build and go:build lines in sync since then, but enough time has passed. Time to remove them. Done with: perl -i -npe 's,^// \+build.*\n,,' $(git grep -l -F '+build') Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Mihai Parparita	9214b293e3	tstime: add ParseDuration helper function More expressive than time.ParseDuration, also accepting d (days) and w (weeks) literals. Signed-off-by: Mihai Parparita <mihai@tailscale.com>	2 years ago
Robert Fritzsche	0e62a7d1a2	tstime/mono: fix Before function comment Signed-off-by: Robert Fritzsche <r.fritzsche@gridx.de>	3 years ago
Brad Fitzpatrick	6a2e94cbeb	tstime/rate: deflake TestLongRunningQPS even more Previous de-flakings: * `8cf1af8a07` for #3733 * `30458c71c8` for #2727 Fixes #4044 Change-Id: I506cf1ff37bb224f5a9929f1998901e60b24535d Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Josh Bleecher Snyder	8cf1af8a07	tstime/rate: deflake TestLongRunningQPS This test set the bar too high. Just a couple of missed timers was enough to fail. Change the test to more of a sanity check. While we're here, run it for just 1s instead of 5s. Prior to this change, on a 13" M1 MPB, with stress -p 512 ./rate.test -test.run=QPS I saw 90%+ failures. After this change, I'm at 30k runs with no failures yet. Fixes #3733 Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Emmanuel T Odeke	0daa32943e	all: add (*testing.B).ReportAllocs() to every benchmark This ensures that we can properly track and catch allocation slippages that could otherwise have been missed. Fixes #2748	3 years ago
Joe Tsai	30458c71c8	tstime/rate: deflake TestLongRunningQPS This test is highly dependent on the accuracy of OS timers. Reduce the number of failures by decreasing the required accuracy from 0.999 to 0.995. Also, switch from repeated time.Sleep to using a time.Ticker for improved accuracy. Updates #2727 Signed-off-by: Joe Tsai <joetsai@digital-static.net>	3 years ago
Josh Bleecher Snyder	f013960d87	tstime/mono: make json.Unmarshal of a zero time.Time yield a zero Time This was the proximate cause of #2579. #2582 is a deeper fix, but this will remain as a footgun, so may as well fix it too. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Brad Fitzpatrick	f3c96df162	ipn/ipnstate: move tailscale status "active" determination to tailscaled Fixes #2579 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 years ago
Josh Bleecher Snyder	9da4181606	tstime/rate: new package This is a simplified rate limiter geared for exactly our needs: A fast, mono.Time-based rate limiter for use in tstun. It was generated by stripping down the x/time/rate rate limiter to just our needs and switching it to use mono.Time. It removes one time.Now call per packet. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Josh Bleecher Snyder	142670b8c2	tstime/mono: new package Package mono provides a fast monotonic time. Its primary advantage is that it is fast: It is approximately twice as fast as time.Now. This is because time.Now uses two clock calls, one for wall time and one for monotonic time. We ask for the current time 4-6 times per network packet. At ~50ns per call to time.Now, that's enough to show up in CPU profiles. Package mono is a first step towards addressing that. It is designed to be a near drop-in replacement for package time. Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	3 years ago
Brad Fitzpatrick	9f1b02699a	tstime: add RandomDurationBetween helper Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	4 years ago
Josh Bleecher Snyder	aa9d7f4665	tstime: add Parse3339B, for byte slices Use go4.org/mem for memory safety. A slight performance hit, but a huge performance win for clients who start with a []byte. The perf hit is due largely to the MapHash call, which adds ~25ns. That is necessary to keep the fast path allocation-free. name old time/op new time/op delta GoParse3339/Z-8 281ns ± 1% 283ns ± 2% ~ (p=0.366 n=9+9) GoParse3339/TZ-8 509ns ± 0% 510ns ± 1% ~ (p=0.059 n=9+9) GoParse3339InLocation-8 330ns ± 1% 330ns ± 0% ~ (p=0.802 n=10+6) Parse3339/Z-8 69.3ns ± 1% 74.4ns ± 1% +7.45% (p=0.000 n=9+10) Parse3339/TZ-8 110ns ± 1% 140ns ± 3% +27.42% (p=0.000 n=9+10) ParseInt-8 8.20ns ± 1% 8.17ns ± 1% ~ (p=0.452 n=9+9) name old alloc/op new alloc/op delta GoParse3339/Z-8 0.00B 0.00B ~ (all equal) GoParse3339/TZ-8 160B ± 0% 160B ± 0% ~ (all equal) GoParse3339InLocation-8 0.00B 0.00B ~ (all equal) Parse3339/Z-8 0.00B 0.00B ~ (all equal) Parse3339/TZ-8 0.00B 0.00B ~ (all equal) name old allocs/op new allocs/op delta GoParse3339/Z-8 0.00 0.00 ~ (all equal) GoParse3339/TZ-8 3.00 ± 0% 3.00 ± 0% ~ (all equal) GoParse3339InLocation-8 0.00 0.00 ~ (all equal) Parse3339/Z-8 0.00 0.00 ~ (all equal) Parse3339/TZ-8 0.00 0.00 ~ (all equal) Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>	4 years ago
David Anderson	b925e18f70	tstime: hand-implement parseInt for specific needs of rfc3339 parsing. Makes parsing 4.6x faster. name old time/op new time/op delta ParseInt-12 32.1ns ± 1% 6.9ns ± 2% -78.55% (p=0.000 n=10+9) Signed-off-by: David Anderson <danderson@tailscale.com>	5 years ago
Brad Fitzpatrick	71d6738333	tstime: change an Errorf+return to Fatalf in subtest Forgot to git add this during review. Fail.	5 years ago
Brad Fitzpatrick	febdac0499	tstime: write Parse3339 parse that doesn't use time.Parse It doesn't allocate and it's half the time of time.Parse (which allocates), and 2/3rds the time of time.ParseInLocation (which doesn't). Go with a UTC time: BenchmarkGoParse3339/Z-8 2200995 534 ns/op 0 B/op 0 allocs/op BenchmarkGoParse3339/Z-8 2254816 554 ns/op 0 B/op 0 allocs/op BenchmarkGoParse3339/Z-8 2159504 522 ns/op 0 B/op 0 allocs/op Go allocates with a "-08:00" suffix instead of ending in "Z": BenchmarkGoParse3339/TZ-8 1276491 884 ns/op 144 B/op 3 allocs/op BenchmarkGoParse3339/TZ-8 1355858 942 ns/op 144 B/op 3 allocs/op BenchmarkGoParse3339/TZ-8 1385484 911 ns/op 144 B/op 3 allocs/op Go doesn't allocate if you use time.ParseInLocation, but then you need to parse the string to find the location anyway, so might as well go all the way (below). BenchmarkGoParse3339InLocation-8 1912254 597 ns/op 0 B/op 0 allocs/op BenchmarkGoParse3339InLocation-8 1980043 612 ns/op 0 B/op 0 allocs/op BenchmarkGoParse3339InLocation-8 1891366 612 ns/op 0 B/op 0 allocs/op Parsing RFC3339 ourselves, UTC: BenchmarkParse3339/Z-8 3889220 307 ns/op 0 B/op 0 allocs/op BenchmarkParse3339/Z-8 3718500 309 ns/op 0 B/op 0 allocs/op BenchmarkParse3339/Z-8 3621231 303 ns/op 0 B/op 0 allocs/op Parsing RFC3339 ourselves, with timezone (w/ *time.Location fetched from sync.Map) BenchmarkParse3339/TZ-8 3019612 418 ns/op 0 B/op 0 allocs/op BenchmarkParse3339/TZ-8 2921618 401 ns/op 0 B/op 0 allocs/op BenchmarkParse3339/TZ-8 3031671 408 ns/op 0 B/op 0 allocs/op Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago
Brad Fitzpatrick	d503dee6f1	tstime: add new package for time utilities, starting with Parse3339 Go's time.Parse always allocates a FixedZone for time strings not in UTC (ending in "Z"). This avoids that allocation, at the cost of adding a cache. Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	5 years ago

31 Commits (main)