tailscale

Commit Graph

Author	SHA1	Message	Date
James Tucker	8d1249550a	net/netcheck,wgengine/magicsock: add potential workaround for Palo Alto DIPP misbehavior Palo Alto firewalls have a typically hard NAT, but also have a mode called Persistent DIPP that is supposed to provide consistent port mapping suitable for STUN resolution of public ports. Persistent DIPP works initially on most Palo Alto firewalls, but some models/software versions have a bug which this works around. The bug symptom presents as follows: - STUN sessions resolve a consistent public IP:port to start with - Much later netchecks report the same IP:Port for a subset of sessions, most often the users active DERP, and/or the port related to sustained traffic. - The broader set of DERPs in a full netcheck will now consistently observe a new IP:Port. - After this point of observation, new inbound connections will only succeed to the new IP:Port observed, and existing/old sessions will only work to the old binding. In this patch we now advertise the lowest latency global endpoint discovered as we always have, but in addition any global endpoints that are observed more than once in a single netcheck report. This should provide viable endpoints for potential connection establishment across a NAT with this behavior. Updates tailscale/corp#19106 Signed-off-by: James Tucker <james@tailscale.com>	2 days ago
Maisem Ali	85b9a6c601	net/netcheck: do not add derps if IPv4/IPv6 is set to "none" It was documented as such but seems to have been dropped in a refactor, restore the behavior. This brings down the time it takes to run a single integration test by 2s which adds up quite a bit. Updates tailscale/corp#19786 Signed-off-by: Maisem Ali <maisem@tailscale.com>	2 weeks ago
Brad Fitzpatrick	c3c18027c6	all: make more tests pass/skip in airplane mode Updates tailscale/corp#19786 Change-Id: Iedc6730fe91c627b556bff5325bdbaf7bf79d8e6 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 weeks ago
Brad Fitzpatrick	e42c4396cf	net/netcheck: don't spam on ICMP socket permission denied errors While debugging a failing test in airplane mode on macOS, I noticed netcheck logspam about ICMP socket creation permission denied errors. Apparently macOS just can't do those, or at least not in airplane mode. Not worth spamming about. Updates #cleanup Change-Id: I302620cfd3c8eabb25202d7eef040c01bd8a843c Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 weeks ago
Brad Fitzpatrick	ee3bd4dbda	derp/derphttp, net/netcheck: plumb netmon.Monitor to derp netcheck client Fixes #11981 Change-Id: I0e15a09f93aefb3cfddbc12d463c1c08b83e09fd Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 weeks ago
Brad Fitzpatrick	b9adbe2002	net/{interfaces,netmon}, all: merge net/interfaces package into net/netmon In prep for most of the package funcs in net/interfaces to become methods in a long-lived netmon.Monitor that can cache things. (Many of the funcs are very heavy to call regularly, whereas the long-lived netmon.Monitor can subscribe to things from the OS and remember answers to questions it's asked regularly later) Updates tailscale/corp#10910 Updates tailscale/corp#18960 Updates #7967 Updates #3299 Change-Id: Ie4e8dedb70136af2d611b990b865a822cd1797e5 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 weeks ago
Brad Fitzpatrick	6b95219e3a	net/netmon, add: add netmon.State type alias of interfaces.State ... in prep for merging the net/interfaces package into net/netmon. This is a no-op change that updates a bunch of the API signatures ahead of a future change to actually move things (and remove the type alias) Updates tailscale/corp#10910 Updates tailscale/corp#18960 Updates #7967 Updates #3299 Change-Id: I477613388f09389214db0d77ccf24a65bff2199c Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 weeks ago
Brad Fitzpatrick	3672f29a4e	net/netns, net/dns/resolver, etc: make netmon required in most places The goal is to move more network state accessors to netmon.Monitor where they can be cheaper/cached. But first (this change and others) we need to make sure the one netmon.Monitor is plumbed everywhere. Some notable bits: * tsdial.NewDialer is added, taking a now-required netmon * because a tsdial.Dialer always has a netmon, anything taking both a Dialer and a NetMon is now redundant; take only the Dialer and get the NetMon from that if/when needed. * netmon.NewStatic is added, primarily for tests Updates tailscale/corp#10910 Updates tailscale/corp#18960 Updates #7967 Updates #3299 Change-Id: I877f9cb87618c4eb037cee098241d18da9c01691 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 weeks ago
Brad Fitzpatrick	7a62dddeac	net/netcheck, wgengine/magicsock: make netmon.Monitor required This has been a TODO for ages. Time to do it. The goal is to move more network state accessors to netmon.Monitor where they can be cheaper/cached. Updates tailscale/corp#10910 Updates tailscale/corp#18960 Updates #7967 Updates #3299 Change-Id: I60fc6508cd2d8d079260bda371fc08b6318bcaf1 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 weeks ago
James Tucker	6e334e64a1	net/netcheck,wgengine/magicsock: align DERP frame receive time heuristics The netcheck package and the magicksock package coordinate via the health package, but both sides have time based heuristics through indirect dependencies. These were misaligned, so the implemented heuristic aimed at reducing DERP moves while there is active traffic were non-operational about 3/5ths of the time. It is problematic to setup a good test for this integration presently, so instead I added comment breadcrumbs along with the initial fix. Updates #8603 Signed-off-by: James Tucker <james@tailscale.com>	1 month ago
Brad Fitzpatrick	2bd3c1474b	util/cmpx: delete now that we're using Go 1.22 Updates #11058 Change-Id: I09dea8e86f03ec148b715efca339eab8b1f0f644 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	3 months ago
Andrew Dunham	727acf96a6	net/netcheck: use DERP frames as a signal for home region liveness This uses the fact that we've received a frame from a given DERP region within a certain time as a signal that the region is stil present (and thus can still be a node's PreferredDERP / home region) even if we don't get a STUN response from that region during a netcheck. This should help avoid DERP flaps that occur due to losing STUN probes while still having a valid and active TCP connection to the DERP server. RELNOTE=Reduce home DERP flapping when there's still an active connection Updates #8603 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: If7da6312581e1d434d5c0811697319c621e187a0	5 months ago
Andrea Barisani	affe11c503	net/netcheck: only run HTTP netcheck for tamago clients Signed-off-by: Andrea Barisani <andrea@inversepath.com>	5 months ago
James Tucker	de8e55fda6	net/netcheck,wgengine/magicsock: reduce coupling between netcheck and magicsock Netcheck no longer performs I/O itself, instead it makes requests via SendPacket and expects users to route reply traffic to ReceiveSTUNPacket. Netcheck gains a Standalone function that stands up sockets and goroutines to implement I/O when used in a standalone fashion. Magicsock now unconditionally routes STUN traffic to the netcheck.Client that it hosts, and plumbs the send packet sink. The CLI is updated to make use of the Standalone mode. Fixes #8723 Signed-off-by: James Tucker <james@tailscale.com>	9 months ago
Brad Fitzpatrick	66e46bf501	ipnlocal, net/*: deprecate interfaces.GetState, use netmon more for it Updates #cleanup Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	10 months ago
Andrew Dunham	9b5e29761c	net/netcheck: ignore PreferredDERP changes that are small If the absolute value of the difference between the current PreferredDERP's latency and the best latency is <= 10ms, don't change it and instead prefer the previous value. This is in addition to the existing hysteresis that tries to remain on the previous DERP region if the relative improvement is small, but handles nodes that have low latency to >1 DERP region better. Updates #8603 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I1e34c94178f8c9a68a69921c5bc0227337514c70	10 months ago
Andrew Dunham	7aba0b0d78	net/netcheck, tailcfg: add DERPHomeParams and use it This allows providing additional information to the client about how to select a home DERP region, such as preferring a given DERP region over all others. Updates #8603 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I7c4a270f31d8585112fab5408799ffba5b75266f	10 months ago
Brad Fitzpatrick	eefee6f149	all: use cmpx.Or where it made sense I left a few out where writing it explicitly was better for various reasons. Updates #8296 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	12 months ago
James Tucker	da90fab899	net/netcheck: reenable TestBasic on Windows This test was either fixed by intermediate changes or was mis-flagged as failing during #7876 triage. Updates #7876 Signed-off-by: James Tucker <jftucker@gmail.com>	1 year ago
Charlotte Brandhorst-Satzkorn	161d1d281a	net/ping,netcheck: add v6 pinging capabilities to pinger (#7971 ) This change adds a v6conn to the pinger to enable sending pings to v6 addrs. Updates #7826 Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>	1 year ago
Brad Fitzpatrick	90ba26cea1	net/netcheck: fix crash when IPv6 kinda but not really works Looks like on some systems there's an IPv6 address, but then opening a IPv6 UDP socket fails later. Probably some firewall. Tolerate it better and don't crash. To repro: check the "udp6" to something like "udp7" (something that'll fail) and run "go run ./cmd/tailscale netcheck" on a machine with active IPv6. It used to crash and now it doesn't. Fixes #7949 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Mihai Parparita	7330aa593e	all: avoid repeated default interface lookups On some platforms (notably macOS and iOS) we look up the default interface to bind outgoing connections to. This is both duplicated work and results in logspam when the default interface is not available (i.e. when a phone has no connectivity, we log an error and thus cause more things that we will try to upload and fail). Fixed by passing around a netmon.Monitor to more places, so that we can use its cached interface state. Fixes #7850 Updates #7621 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	1 year ago
James Tucker	c5150eae67	net/netcheck: reenable TestNodeAddrResolve on Windows Updates #7876 Co-authored-by: Andrew Dunham <andrew@du.nham.ca> Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Signed-off-by: James Tucker <james@tailscale.com> Change-Id: Idb2e6cc2edf6ca123b751d6c8f8729b0cba86023	1 year ago
Brad Fitzpatrick	10f1c90f4d	wgengine/magicsock, types/nettype, etc: finish ReadFromUDPAddrPort netip migration So we're staying within the netip.Addr/AddrPort consistently and avoiding allocs/conversions to the legacy net addr types. Updates #5162 Change-Id: I59feba60d3de39f773e68292d759766bac98c917 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Brad Fitzpatrick	29f7df9d8f	wgengine/magicsock, etc: remove mostly unused WriteTo methods Updates #2331 Updates #5162 Change-Id: I8291884425481eeaedde38a54adfd8ed7292a497 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Brad Fitzpatrick	83c41f3697	net/netcheck: remove unused method from interface Updates #2331 Updates #5162 Change-Id: I77ff956c2d59bde611d47523659a07afb4a6da2d Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
James Tucker	8dec1a8724	.github/workflows: reenable Windows CI, disable broken tests We accidentally switched to ./tool/go in `4022796484` which resulted in no longer running Windows builds, as this is attempting to run a bash script. I was unable to quickly fix the various tests that have regressed, so instead I've added skips referencing #7876, which we need to back and fix. Updates #7262 Updates #7876 Signed-off-by: James Tucker <james@tailscale.com>	1 year ago
Andrew Dunham	228d0c6aea	net/netcheck: use dnscache.Resolver when resolving DERP IPs This also adds a bunch of tests for this function to ensure that we're returning the proper IP(s) in all cases. Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I0d9d57170dbab5f2bf07abdf78ecd17e0e635399	1 year ago
Mihai Parparita	edb02b63f8	net/sockstats: pass in logger to sockstats.WithSockStats Using log.Printf may end up being printed out to the console, which is not desirable. I noticed this when I was investigating some client logs with `sockstats: trace "NetcheckClient" was overwritten by another`. That turns to be harmless/expected (the netcheck client will fall back to the DERP client in some cases, which does its own sockstats trace). However, the log output could be visible to users if running the `tailscale netcheck` CLI command, which would be needlessly confusing. Updates tailscale/corp#9230 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	1 year ago
Andrew Dunham	4cb1bfee44	net/netcheck: improve determinism in hairpinning test If multiple Go channels have a value (or are closed), receiving from them all in a select will nondeterministically return one of the two arms. In this case, it's possible that the hairpin check timer will have expired between when we start checking and before we check at all, but the hairpin packet has already been received. In such cases, we'd nondeterministically set report.HairPinning. Instead, check if we have a value in our results channel first, then select on the value and timeout channel after. Also, add a test that catches this particular failure. Fixes #1795 Change-Id: I842ab0bd38d66fabc6cabf2c2c1bb9bd32febf35 Signed-off-by: Andrew Dunham <andrew@du.nham.ca>	1 year ago
Mihai Parparita	6ac6ddbb47	sockstats: switch label to enum Makes it cheaper/simpler to persist values, and encourages reuse of labels as opposed to generating an arbitrary number. Updates tailscale/corp#9230 Updates #3363 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	1 year ago
Maisem Ali	b9ebf7cf14	tstest: add method to Replace values for tests We have many function pointers that we replace for the duration of test and restore it on test completion, add method to do that. Signed-off-by: Maisem Ali <maisem@tailscale.com>	1 year ago
Mihai Parparita	9cb332f0e2	sockstats: instrument networking code paths Uses the hooks added by tailscale/go#45 to instrument the reads and writes on the major code paths that do network I/O in the client. The convention is to use "<package>.<type>:<label>" as the annotation for the responsible code path. Enabled on iOS, macOS and Android only, since mobile platforms are the ones we're most interested in, and we are less sensitive to any throughput degradation due to the per-I/O callback overhead (macOS is also enabled for ease of testing during development). For now just exposed as counters on a /v0/sockstats PeerAPI endpoint. We also keep track of the current interface so that we can break out the stats by interface. Updates tailscale/corp#9230 Updates #3363 Signed-off-by: Mihai Parparita <mihai@tailscale.com>	1 year ago
Brad Fitzpatrick	b1248442c3	all: update to Go 1.20, use strings.CutPrefix/Suffix instead of our fork Updates #7123 Updates #5309 Change-Id: I90bcd87a2fb85a91834a0dd4be6e03db08438672 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	1 year ago
Will Norris	71029cea2d	all: update copyright and license headers This updates all source files to use a new standard header for copyright and license declaration. Notably, copyright no longer includes a date, and we now use the standard SPDX-License-Identifier header. This commit was done almost entirely mechanically with perl, and then some minimal manual fixes. Updates #6865 Signed-off-by: Will Norris <will@tailscale.com>	1 year ago
Andrew Dunham	e85613aa2d	net/netcheck: don't use a space in the captive portal challenge The derpers don't allow whitespace in the challenge. Change-Id: I93a8b073b846b87854fba127b5c1d80db205f658 Signed-off-by: Andrew Dunham <andrew@tailscale.com>	2 years ago
Brad Fitzpatrick	036334e913	net/netcheck: deflake (maybe) magicsock's TestNewConn Updates #6207 Change-Id: I51d200d0b42b9a1ef799d0abfc8d4bd871c50cf2 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Andrew Dunham	74693793be	net/netcheck, tailcfg: track whether OS supports IPv6 We had previously added this to the netcheck report in #5087 but never copied it into the NetInfo struct. Additionally, add it to log lines so it's visible to support. Change-Id: Ib6266f7c6aeb2eb2a28922aeafd950fe1bf5627e Signed-off-by: Andrew Dunham <andrew@tailscale.com>	2 years ago
Andrew Dunham	223126fe5b	cmd/derper, net/netcheck: add challenge/response to generate_204 endpoint The Lufthansa in-flight wifi generates a synthetic 204 response to the DERP server's /generate_204 endpoint. This PR adds a basic challenge/response to the endpoint; something sufficiently complicated that it's unlikely to be implemented by a captive portal. We can then check for the expected response to verify whether we're being MITM'd. Follow-up to #5601 Signed-off-by: Andrew Dunham <andrew@du.nham.ca> Change-Id: I94a68c9a16a7be7290200eea6a549b64f02ff48f	2 years ago
Brad Fitzpatrick	9a264dac01	net/netcheck: fix crash in checkCaptivePortal If netcheck happens before there's a derpmap. This seems to only affect Headscale because it doesn't send a derpmap as early? Change-Id: I51e0dfca8e40623e04702bc9cc471770ca20d2c2 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Josh Soref	d4811f11a0	all: fix spelling mistakes Signed-off-by: Josh Soref <2119212+jsoref@users.noreply.github.com>	2 years ago
Emmanuel T Odeke	f981b1d9da	all: fix resource leaks with missing .Close() calls Fixes #5706 Signed-off-by: Emmanuel T Odeke <emmanuel@orijtech.com>	2 years ago
Andrew Dunham	c6162c2a94	net/netcheck: add check for captive portal (#5593 ) This doesn't change any behaviour for now, other than maybe running a full netcheck more often. The intent is to start gathering data on captive portals, and additionally, seeing this in the 'tailscale netcheck' command should provide a bit of additional information to users. Updates #1634 Change-Id: I6ba08f9c584dc0200619fa97f9fde1a319f25c76 Signed-off-by: Andrew Dunham <andrew@du.nham.ca>	2 years ago
Eng Zer Jun	f0347e841f	refactor: move from io/ioutil to io and os packages The io/ioutil package has been deprecated as of Go 1.16 [1]. This commit replaces the existing io/ioutil functions with their new definitions in io and os packages. Reference: https://golang.org/doc/go1.16#ioutil Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>	2 years ago
Brad Fitzpatrick	74674b110d	envknob: support changing envknobs post-init Updates #5114 Change-Id: Ia423fc7486e1b3f3180a26308278be0086fae49b Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Kris Brandow	8f38afbf8e	net/stun: convert to use net/netip.AddrPort Convert ParseResponse and Response to use netip.AddrPort instead of net.IP and separate port. Fixes #5281 Signed-off-by: Kris Brandow <kris.brandow@gmail.com>	2 years ago
Brad Fitzpatrick	ec9d13bce5	hostinfo, net/netcheck: use CutPrefix Updates #5309 Change-Id: I37e594cfd245784bf810c493de68a66d3ff20677 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Andrew Dunham	f0d6f173c9	net/netcheck: try ICMP if UDP is blocked (#5056 ) Signed-off-by: Andrew Dunham <andrew@du.nham.ca>	2 years ago
Brad Fitzpatrick	5f6abcfa6f	all: migrate code from netaddr.FromStdAddr to Go 1.18 With caveat https://github.com/golang/go/issues/53607#issuecomment-1203466984 that then requires a new wrapper. But a simpler one at least. Updates #5162 Change-Id: I0a5265065bfcd7f21e8dd65b2bd74cae90d76090 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago
Brad Fitzpatrick	8725b14056	all: migrate more code code to net/netip directly Instead of going through the tailscale.com/net/netaddr transitional wrappers. Updates #5162 Change-Id: I3dafd1c2effa1a6caa9b7151ecf6edd1a3fda3dd Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>	2 years ago

1 2 3

101 Commits (main)