You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
tailscale/net/packet/icmp6.go

168 lines
4.3 KiB
Go

// Copyright (c) 2020 Tailscale Inc & AUTHORS All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.
package packet
import (
"encoding/binary"
"tailscale.com/types/ipproto"
)
// icmp6HeaderLength is the size of the ICMPv6 packet header, not
// including the outer IP layer or the variable "response data"
// trailer.
const icmp6HeaderLength = 4
// ICMP6Type is an ICMPv6 type, as specified in
// https://www.iana.org/assignments/icmpv6-parameters/icmpv6-parameters.xhtml
type ICMP6Type uint8
const (
ICMP6Unreachable ICMP6Type = 1
ICMP6TimeExceeded ICMP6Type = 3
ICMP6EchoRequest ICMP6Type = 128
ICMP6EchoReply ICMP6Type = 129
)
func (t ICMP6Type) String() string {
switch t {
case ICMP6Unreachable:
return "Unreachable"
case ICMP6TimeExceeded:
return "TimeExceeded"
case ICMP6EchoRequest:
return "EchoRequest"
case ICMP6EchoReply:
return "EchoReply"
default:
return "Unknown"
}
}
// ICMP6Code is an ICMPv6 code, as specified in
// https://www.iana.org/assignments/icmpv6-parameters/icmpv6-parameters.xhtml
type ICMP6Code uint8
const (
ICMP6NoCode ICMP6Code = 0
)
// ICMP6Header is an IPv4+ICMPv4 header.
type ICMP6Header struct {
IP6Header
Type ICMP6Type
Code ICMP6Code
}
// Len implements Header.
func (h ICMP6Header) Len() int {
return h.IP6Header.Len() + icmp6HeaderLength
}
// Marshal implements Header.
func (h ICMP6Header) Marshal(buf []byte) error {
if len(buf) < h.Len() {
return errSmallBuffer
}
if len(buf) > maxPacketLength {
return errLargePacket
}
// The caller does not need to set this.
h.IPProto = ipproto.ICMPv6
h.IP6Header.Marshal(buf)
const o = ip6HeaderLength // start offset of ICMPv6 header
buf[o+0] = uint8(h.Type)
buf[o+1] = uint8(h.Code)
buf[o+2] = 0 // checksum, to be filled in later
buf[o+3] = 0 // checksum, to be filled in later
return nil
}
// ToResponse implements Header. TODO: it doesn't implement it
// correctly, instead it statically generates an ICMP Echo Reply
// packet.
func (h *ICMP6Header) ToResponse() {
// TODO: this doesn't implement ToResponse correctly, as it
// assumes the ICMP request type.
h.Type = ICMP6EchoReply
h.Code = ICMP6NoCode
h.IP6Header.ToResponse()
}
// WriteChecksum implements HeaderChecksummer, writing just the checksum bytes
// into the otherwise fully marshaled ICMP6 packet p (which should include the
// IPv6 header, ICMPv6 header, and payload).
func (h ICMP6Header) WriteChecksum(p []byte) {
const payOff = ip6HeaderLength + icmp6HeaderLength
xsum := icmp6Checksum(p[ip6HeaderLength:payOff], h.Src.As16(), h.Dst.As16(), p[payOff:])
binary.BigEndian.PutUint16(p[ip6HeaderLength+2:], xsum)
}
// Adapted from gVisor:
// icmp6Checksum calculates the ICMP checksum over the provided ICMPv6
// header (without the IPv6 header), IPv6 src/dst addresses and the
// payload.
//
// The header's existing checksum must be zeroed.
func icmp6Checksum(header []byte, src, dst [16]byte, payload []byte) uint16 {
// Calculate the IPv6 pseudo-header upper-layer checksum.
xsum := checksumBytes(src[:], 0)
xsum = checksumBytes(dst[:], xsum)
var scratch [4]byte
binary.BigEndian.PutUint32(scratch[:], uint32(len(header)+len(payload)))
xsum = checksumBytes(scratch[:], xsum)
xsum = checksumBytes(append(scratch[:0], 0, 0, 0, uint8(ipproto.ICMPv6)), xsum)
xsum = checksumBytes(payload, xsum)
var hdrz [icmp6HeaderLength]byte
copy(hdrz[:], header)
// Zero out the header.
hdrz[2] = 0
hdrz[3] = 0
xsum = ^checksumBytes(hdrz[:], xsum)
return xsum
}
// checksumCombine combines the two uint16 to form their
// checksum. This is done by adding them and the carry.
//
// Note that checksum a must have been computed on an even number of
// bytes.
func checksumCombine(a, b uint16) uint16 {
v := uint32(a) + uint32(b)
return uint16(v + v>>16)
}
// checksumBytes calculates the checksum (as defined in RFC 1071) of
// the bytes in buf.
//
// The initial checksum must have been computed on an even number of bytes.
func checksumBytes(buf []byte, initial uint16) uint16 {
v := uint32(initial)
odd := len(buf)%2 == 1
if odd {
v += uint32(buf[0])
buf = buf[1:]
}
n := len(buf)
odd = n&1 != 0
if odd {
n--
v += uint32(buf[n]) << 8
}
for i := 0; i < n; i += 2 {
v += (uint32(buf[i]) << 8) + uint32(buf[i+1])
}
return checksumCombine(uint16(v), uint16(v>>16))
}