Ansible Extension ================= .. image:: images/ansible/cell_division.png :align: right An experimental extension to `Ansible`_ is included that implements host connections over Mitogen, replacing embedded shell invocations with pure-Python equivalents invoked via highly efficient remote procedure calls tunnelled over SSH. No changes are required to the target hosts. The extension isn't nearly in a generally dependable state yet, however it already works well enough for testing against real-world playbooks. `Bug reports`_ in this area are very welcome – Ansible is a huge beast, and only significant testing will prove the extension's soundness. Divergence from Ansible's normal behaviour is considered a bug, so please report anything you notice, regardless of how inconsequential it may seem. .. _Ansible: https://www.ansible.com/ .. _Bug reports: https://goo.gl/yLKZiJ Overview -------- You should **expect a 1.25x - 7x speedup** and a **CPU usage reduction of at least 2x**, depending on network conditions, the specific modules executed, and time spent by the target host already doing useful work. Mitogen cannot speed up a module once it is executing, it can only ensure the module executes as quickly as possible. * **A single SSH connection is used for each target host**, in addition to one sudo invocation per distinct user account. Subsequent playbook steps always reuse the same connection. This is much better than SSH multiplexing combined with pipelining, as significant state can be maintained in RAM between steps, and the system logs aren't filled with spam from repeat SSH and sudo invocations. * **A single Python interpreter is used** per host and sudo account combination for the duration of the run, avoiding the repeat cost of invoking multiple interpreters and recompiling imports, saving 300-800 ms for every playbook step. * Remote interpreters reuse Mitogen's module import mechanism, caching uploaded dependencies between steps at the host and user account level. As a consequence, **bandwidth usage is consistently an order of magnitude lower** compared to SSH pipelining, and around 5x fewer frames are required to traverse the wire for a run to complete successfully. * **No writes to the target host's filesystem occur**, unless explicitly triggered by a playbook step. In all typical configurations, Ansible repeatedly rewrites and extracts ZIP files to multiple temporary directories on the target host. Since no temporary files are used, security issues relating to those files in cross-account scenarios are entirely avoided. Testimonials ------------ * "With mitogen **my playbook runtime went from 45 minutes to just under 3 minutes**. Awesome work!" * "The runtime was reduced from **1.5 hours on 4 servers to just under 3 minutes**. Thanks!" * "Oh, performance improvement using Mitogen is *huge*. As mentioned before, running with Mitogen enables takes 7m36 (give or take a few seconds). Without Mitogen, the same run takes 19m49! **I'm not even deploying without Mitogen anymore** :)" * "**Works like a charm**, thank you for your quick response" * "I tried it out. **He is not kidding about the speed increase**." * "I don't know what kind of dark magic @dmw_83 has done, but his Mitogen strategy took Clojars' Ansible runs from **14 minutes to 2 minutes**. I still can't quite believe it." Installation ------------ .. caution:: Thoroughly review the list of limitations before use, and **do not test the prototype in a live environment until this notice is removed**. 1. Verify Ansible 2.4 and Python 2.7 are listed in the output of ``ansible --version`` 2. Download and extract https://github.com/dw/mitogen/archive/master.zip 3. Modify ``ansible.cfg``: .. code-block:: dosini [defaults] strategy_plugins = /path/to/mitogen-master/ansible_mitogen/plugins/strategy strategy = mitogen The ``strategy`` key is optional. If omitted, you can set the ``ANSIBLE_STRATEGY=mitogen`` environment variable on a per-run basis. 4. Cross your fingers and try it. Limitations ----------- This is a proof of concept: issues below are exclusively due to code immaturity. High Risk ~~~~~~~~~ * For now only **built-in Python command modules work**, however almost all modules shipped with Ansible are Python-based. * Transfer of large (i.e. GB-sized) files using certain Ansible-internal APIs, such as triggered via the ``copy`` module, will cause corresponding temporary memory and CPU spikes on both host and target machine, due to delivering the file as a single large message. If many machines are targetted with a large file, the host machine could easily exhaust available RAM. This will be fixed soon as it's likely to be tickled by common playbooks. * Local actions are single threaded. Any that execute for every target will experience artificial serialization, causing slowdown equivalent to `task_duration * num_targets`. This will be fixed soon. * `Asynchronous Actions And Polling `_ has received minimal testing. * Only Ansible 2.4 is being used for development, with occasional tests under 2.3 and 2.2. It should be more than possible to fully support at least 2.3, if not also 2.2. Low Risk ~~~~~~~~ * Only UNIX machines running Python 2.x are supported, Windows will come later. * Only the ``sudo`` become method is available, however adding new methods is straightforward, and eventually at least ``su`` will be included. * The only supported strategy is ``linear``, which is Ansible's default. * In some cases ``remote_tmp`` may not be respected. * The extension's performance benefits do not scale perfectly linearly with the number of targets. This is a subject of ongoing investigation and improvements will appear in time. * Ansible defaults to requiring pseudo TTYs for most SSH invocations, in order to allow it to handle ``sudo`` with ``requiretty`` enabled, however it disables pseudo TTYs for certain commands where standard input is required or ``sudo`` is not in use. Mitogen does not require this, as it can simply call :py:func:`pty.openpty` from the SSH user account during ``sudo`` setup. A major downside to Ansible's default is that stdout and stderr of any resulting executed command are merged, with additional carriage return characters synthesized in the output by the TTY layer. Neither of these problems are apparent using the Mitogen extension, which may break some playbooks. A future version will emulate Ansible's behaviour, once it is clear precisely what that behaviour is supposed to be. See `Ansible#14377`_ for related discussion. .. _Ansible#14377: https://github.com/ansible/ansible/issues/14377 Behavioural Differences ----------------------- * Ansible permits up to ``forks`` SSH connections to be setup simultaneously, whereas in Mitogen this is handled by a thread pool. Eventually this pool will become per-CPU, but meanwhile, a maximum of 16 SSH connections may be established simultaneously by default. This can be increased or decreased setting the ``MITOGEN_POOL_SIZE`` environment variable. * Mitogen treats connection timeouts for the SSH and become steps of a task invocation separately, meaning that in some circumstances the configured timeout may appear to be doubled. This is since Mitogen internally treats the creation of an SSH account context separately to the creation of a sudo account context proxied via that SSH account. A future revision may detect a sudo account context created immediately following its parent SSH account, and try to emulate Ansible's existing timeout semantics. * Normally with Ansible, diagnostics and use of the :py:mod:`logging` package output on the target machine are discarded. With Mitogen, all of this is captured and returned to the host machine, where it can be viewed as desired with ``-vvv``. * Ansible with SSH multiplexing enabled causes a string like ``Shared connection to host closed`` to appear in ``stderr`` output of every executed command. This never manifests with the Mitogen extension. * Asynchronous support is very primitive, and jobs execute in a thread of the target Python interpreter. This will fixed shortly. * Local commands are executed in a reuseable Python interpreter created identically to interpreters used on remote hosts. At present only one such interpreter per ``become_user`` exists, and so only one action may be executed in each context simultaneously. Ansible usually permits up to ``ansible.cfg:forks`` simultaneous local actions, which may trigger a performance regression in some playbooks. This will be fixed in a future release. Demo ---- Local VM connection ~~~~~~~~~~~~~~~~~~~ This demonstrates Mitogen vs. connection pipelining to a local VM, executing the 100 simple repeated steps of ``run_hostname_100_times.yml`` from the examples directory. Mitogen requires **43x less bandwidth and 4.25x less time**. .. image:: images/ansible/run_hostname_100_times.png Kathmandu to Paris ~~~~~~~~~~~~~~~~~~ This is a full Django application playbook over a ~180ms link between Kathmandu and Paris. Aside from large pauses where the host performs useful work, the high latency of this link means Mitogen only manages a 1.7x speedup. Many early roundtrips are due to inefficiencies in Mitogen's importer that will be fixed over time, however the majority, comprising at least 10 seconds, are due to idling while the host's previous result and next command are in-flight on the network. The initial extension lays groundwork for exciting structural changes to the execution model: a future version will tackle latency head-on by delegating some control flow to the target host, melding the performance and scalability benefits of pull-based operation with the management simplicity of push-based operation. .. image:: images/ansible/costapp.png SSH Variables ------------- Matching Ansible's existing model, these variables are treated on a per-task basis, causing establishment of additional reuseable interpreters as necessary to match the configuration of each task. This list will grow as more missing pieces are discovered. * ``ansible_ssh_timeout`` * ``ansible_host``, ``ansible_ssh_host`` * ``ansible_user``, ``ansible_ssh_user`` * ``ansible_port``, ``ssh_port`` * ``ansible_ssh_executable``, ``ssh_executable`` * ``ansible_ssh_private_key_file`` * ``ansible_ssh_pass``, ``ansible_password`` (default: assume passwordless) * ``ssh_args``, ``ssh_common_args``, ``ssh_extra_args`` * ``mitogen_ssh_discriminator``: if present, a string mixed into the key used to deduplicate connections. This permits intentional duplicate Mitogen connections to a single host, which is probably only useful for testing. Sudo Variables -------------- * ``ansible_python_interpreter`` * ``ansible_sudo_exe``, ``ansible_become_exe`` * ``ansible_sudo_user``, ``ansible_become_user`` (default: ``root``) * ``ansible_sudo_pass``, ``ansible_become_pass`` (default: assume passwordless) * ``sudo_flags``, ``become_flags`` * ansible.cfg: ``timeout`` Docker Variables ---------------- Note: Docker support is only intended for developer testing, it might disappear entirely prior to a stable release. * ansible_host Chat on IRC ----------- Some users and developers hang out on the `#mitogen `_ channel on the FreeNode IRC network. Debugging --------- Mitogen's logs are integrated into Ansible's display framework. Basic high level debug logs are produced with ``-vvv``, with logging of all IO activity on the controller machine when ``-vvvv`` or higher is specified. Although any use of standard IO and the logging package on remote machines is forwarded to the controller machine, it is not possible to receive logs of all IO activity, as the processs of receiving those logs would would in turn generate more IO activity. To receive a complete trace of every process on every machine, file-based logging is required. File-based logging can be enabled by setting ``MITOGEN_ROUTER_DEBUG=1`` in your environment. When file-based logging is enabled, one file per context will be created on the local machine and every target machine, as ``/tmp/mitogen..log``. Implementation Notes -------------------- Interpreter Reuse ~~~~~~~~~~~~~~~~~ The extension aggressively reuses the single target Python interpreter to execute every module. While this works well, it violates an unwritten assumption regarding Ansible modules, and so it is possible a buggy module could cause a run to fail, or for unrelated modules to interact with each other due to bad hygiene. Mitigations (such as forking) will be added as necessary if problems of this sort ever actually manfest. Runtime Patches ~~~~~~~~~~~~~~~ Three small runtime patches are employed in ``strategy.py`` to hook into desirable locations, in order to override uses of shell, the module executor, and the mechanism for selecting a connection plug-in. While it is hoped the patches can be avoided in future, for interesting versions of Ansible deployed today this simply is not possible, and so they continue to be required. The patches are concise and behave conservatively, including by disabling themselves when non-Mitogen connections are in use. Additional third party plug-ins are unlikely to attempt similar patches, so the risk to an established configuration should be minimal. Flag Emulation ~~~~~~~~~~~~~~ Mitogen re-parses ``sudo_flags``, ``become_flags``, and ``ssh_flags`` using option parsers extracted from `sudo(1)` and `ssh(1)` in order to emulate their equivalent semantics. This allows: * robust support for common ``ansible.cfg`` tricks without reconfiguration, such as forwarding SSH agents across ``sudo`` invocations, * reporting on conflicting flag combinations, * reporting on unsupported flag combinations, * internally special-casing certain behaviour (like recursive agent forwarding) without boring the user with the details, * avoiding opening the extension up to untestable scenarios where users can insert arbitrary garbage between Mitogen and the components it integrates with, * precise emulation by an alternative implementation, for example if Mitogen grew support for Paramiko.