You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
matrix-spec/specification/identity_service_api.rst

283 lines
10 KiB
ReStructuredText

.. Copyright 2016 OpenMarket Ltd
.. Copyright 2017 Kamax.io
.. Copyright 2017 New Vector Ltd
.. Copyright 2018 New Vector Ltd
..
.. Licensed under the Apache License, Version 2.0 (the "License");
.. you may not use this file except in compliance with the License.
.. You may obtain a copy of the License at
..
.. http://www.apache.org/licenses/LICENSE-2.0
..
.. Unless required by applicable law or agreed to in writing, software
.. distributed under the License is distributed on an "AS IS" BASIS,
.. WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
.. See the License for the specific language governing permissions and
.. limitations under the License.
Identity Service API
====================
{{unstable_warning_block_IDENTITY_RELEASE_LABEL}}
The Matrix client-server and server-server APIs are largely expressed in Matrix
user identifiers. From time to time, it is useful to refer to users by other
("third-party") identifiers, or "3pid"s, e.g. their email address or phone
number. This Identity Service Specification describes how mappings between
third-party identifiers and Matrix user identifiers can be established,
validated, and used. This description technically may apply to any 3pid, but in
practice has only been applied specifically to email addresses and phone numbers.
.. contents:: Table of Contents
.. sectnum::
Changelog
---------
.. topic:: Version: %IDENTITY_RELEASE_LABEL%
{{identity_service_changelog}}
This version of the specification is generated from
`matrix-doc <https://github.com/matrix-org/matrix-doc>`_ as of Git commit
`{{git_version}} <https://github.com/matrix-org/matrix-doc/tree/{{git_rev}}>`_.
For the full historical changelog, see
https://github.com/matrix-org/matrix-doc/blob/master/changelogs/identity_service.rst
Other versions of this specification
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The following other versions are also available, in reverse chronological order:
- `HEAD <https://matrix.org/docs/spec/identity_service/unstable.html>`_: Includes all changes since the latest versioned release.
- `r0.1.0 <https://matrix.org/docs/spec/identity_service/r0.1.0.html>`_
General principles
------------------
The purpose of an identity server is to validate, store, and answer questions
about the identities of users. In particular, it stores associations of the form
"identifier X represents the same user as identifier Y", where identities may
exist on different systems (such as email addresses, phone numbers,
Matrix user IDs, etc).
The identity server has some private-public keypairs. When asked about an
association, it will sign details of the association with its private key.
Clients may validate the assertions about associations by verifying the signature
with the public key of the identity server.
In general, identity servers are treated as reliable oracles. They do not
necessarily provide evidence that they have validated associations, but claim to
have done so. Establishing the trustworthiness of an individual identity server
is left as an exercise for the client.
3PID types are described in `3PID Types`_ Appendix.
API standards
-------------
The mandatory baseline for identity server communication in Matrix is exchanging
JSON objects over HTTP APIs. HTTPS is required for communication, and all API calls
use a Content-Type of ``application/json``. In addition, strings MUST be encoded as
UTF-8.
Any errors which occur at the Matrix API level MUST return a "standard error response".
This is a JSON object which looks like:
.. code:: json
{
"errcode": "<error code>",
"error": "<error message>"
}
The ``error`` string will be a human-readable error message, usually a sentence
explaining what went wrong. The ``errcode`` string will be a unique string
which can be used to handle an error message e.g. ``M_FORBIDDEN``. There may be
additional keys depending on the error, but the keys ``error`` and ``errcode``
MUST always be present.
Some standard error codes are below:
:``M_NOT_FOUND``:
The resource requested could not be located.
:``M_MISSING_PARAMS``:
The request was missing one or more parameters.
:``M_INVALID_PARAM``:
The request contained one or more invalid parameters.
:``M_SESSION_NOT_VALIDATED``:
The session has not been validated.
:``M_NO_VALID_SESSION``:
A session could not be located for the given parameters.
:``M_SESSION_EXPIRED``:
The session has expired and must be renewed.
:``M_INVALID_EMAIL``:
The email address provided was not valid.
:``M_EMAIL_SEND_ERROR``:
There was an error sending an email. Typically seen when attempting to verify
ownership of a given email address.
:``M_INVALID_ADDRESS``:
The provided third party address was not valid.
:``M_SEND_ERROR``:
There was an error sending a notification. Typically seen when attempting to
verify ownership of a given third party address.
:``M_UNRECOGNIZED``:
The request contained an unrecognised value, such as an unknown token or medium.
:``M_THREEPID_IN_USE``:
The third party identifier is already in use by another user. Typically this
error will have an additional ``mxid`` property to indicate who owns the
third party identifier.
:``M_UNKNOWN``:
An unknown error has occurred.
Privacy
-------
Identity is a privacy-sensitive issue. While the identity server exists to
provide identity information, access should be restricted to avoid leaking
potentially sensitive data. In particular, being able to construct large-scale
connections between identities should be avoided. To this end, in general APIs
should allow a 3pid to be mapped to a Matrix user identity, but not in the other
direction (i.e. one should not be able to get all 3pids associated with a Matrix
user ID, or get all 3pids associated with a 3pid).
Web browser clients
-------------------
It is realistic to expect that some clients will be written to be run within a web
browser or similar environment. In these cases, the identity server should respond to
pre-flight requests and supply Cross-Origin Resource Sharing (CORS) headers on all
requests.
When a client approaches the server with a pre-flight (OPTIONS) request, the server
should respond with the CORS headers for that route. The recommended CORS headers
to be returned by servers on all requests are::
Access-Control-Allow-Origin: *
Access-Control-Allow-Methods: GET, POST, PUT, DELETE, OPTIONS
Access-Control-Allow-Headers: Origin, X-Requested-With, Content-Type, Accept, Authorization
Status check
------------
{{ping_is_http_api}}
Key management
--------------
An identity server has some long-term public-private keypairs. These are named
in a scheme ``algorithm:identifier``, e.g. ``ed25519:0``. When signing an
association, the standard `Signing JSON`_ algorithm applies.
.. TODO: Actually allow identity servers to revoke all keys
See: https://github.com/matrix-org/matrix-doc/issues/1633
.. In the event of key compromise, the identity server may revoke any of its keys.
An HTTP API is offered to get public keys, and check whether a particular key is
valid.
The identity server may also keep track of some short-term public-private
keypairs, which may have different usage and lifetime characteristics than the
service's long-term keys.
{{pubkey_is_http_api}}
Association lookup
------------------
{{lookup_is_http_api}}
Establishing associations
-------------------------
The flow for creating an association is session-based.
Within a session, one may prove that one has ownership of a 3pid.
Once this has been established, the user can form an association between that
3pid and a Matrix user ID. Note that this association is only proved one way;
a user can associate *any* Matrix user ID with a validated 3pid,
i.e. I can claim that any email address I own is associated with
@billg:microsoft.com.
Sessions are time-limited; a session is considered to have been modified when
it was created, and then when a validation is performed within it. A session can
only be checked for validation, and validation can only be performed within a
session, within a 24 hour period since its most recent modification. Any
attempts to perform these actions after the expiry will be rejected, and a new
session should be created and used instead.
To start a session, the client makes a request to the appropriate
``/requestToken`` endpoint. The identity server then sends a validation token
to the user, and the user provides the token to the client. The client then
provides the token to the appropriate ``/submitToken`` endpoint, completing the
session. At this point, the client should ``/bind`` the third party identifier
or leave it for another entity to bind.
Format of a validation token
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The format of the validation token is left up to the identity server: it
should choose one appropriate to the 3PID type. (For example, it would be
inappropriate to expect a user to copy a long passphrase including punctuation
from an SMS message into a client.)
Whatever format the identity server uses, the validation token must consist of
at most 255 Unicode codepoints. Clients must pass the token through without
modification.
Email associations
~~~~~~~~~~~~~~~~~~
{{email_associations_is_http_api}}
Phone number associations
~~~~~~~~~~~~~~~~~~~~~~~~~
{{phone_associations_is_http_api}}
General
~~~~~~~
{{associations_is_http_api}}
Invitation storage
------------------
An identity server can store pending invitations to a user's 3pid, which will
be retrieved and can be either notified on or look up when the 3pid is
associated with a Matrix user ID.
At a later point, if the owner of that particular 3pid binds it with a Matrix user
ID, the identity server will attempt to make an HTTP POST to the Matrix user's
homeserver via the `/3pid/onbind`_ endpoint. The request MUST be signed with a
long-term private key for the identity server.
{{store_invite_is_http_api}}
Ephemeral invitation signing
----------------------------
To aid clients who may not be able to perform crypto themselves, the identity
server offers some crypto functionality to help in accepting invitations.
This is less secure than the client doing it itself, but may be useful where
this isn't possible.
{{invitation_signing_is_http_api}}
.. _`Unpadded Base64`: ../appendices.html#unpadded-base64
.. _`3PID Types`: ../appendices.html#pid-types
.. _`Signing JSON`: ../appendices.html#signing-json
.. _`/3pid/onbind`: ../server_server/r0.1.0.html#put-matrix-federation-v1-3pid-onbind