You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
matrix-spec/specification/modules/end_to_end_encryption.rst

856 lines
34 KiB
ReStructuredText

.. Copyright 2016 OpenMarket Ltd
..
.. Licensed under the Apache License, Version 2.0 (the "License");
.. you may not use this file except in compliance with the License.
.. You may obtain a copy of the License at
..
.. http://www.apache.org/licenses/LICENSE-2.0
..
.. Unless required by applicable law or agreed to in writing, software
.. distributed under the License is distributed on an "AS IS" BASIS,
.. WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
.. See the License for the specific language governing permissions and
.. limitations under the License.
End-to-End Encryption
=====================
.. _module:e2e:
Matrix optionally supports end-to-end encryption, allowing rooms to be created
whose conversation contents is not decryptable or interceptable on any of the
participating homeservers.
Key Distribution
----------------
Encryption and Authentication in Matrix is based around public-key
cryptography. The Matrix protocol provides a basic mechanism for exchange of
public keys, though an out-of-band channel is required to exchange fingerprints
between users to build a web of trust.
Overview
~~~~~~~~
.. code::
1) Bob publishes the public keys and supported algorithms for his
device. This may include long-term identity keys, and/or one-time
keys.
+----------+ +--------------+
| Bob's HS | | Bob's Device |
+----------+ +--------------+
| |
|<=============|
/keys/upload
2) Alice requests Bob's public identity keys and supported algorithms.
+----------------+ +------------+ +----------+
| Alice's Device | | Alice's HS | | Bob's HS |
+----------------+ +------------+ +----------+
| | |
|=================>|==============>|
/keys/query <federation>
3) Alice selects an algorithm and claims any one-time keys needed.
+----------------+ +------------+ +----------+
| Alice's Device | | Alice's HS | | Bob's HS |
+----------------+ +------------+ +----------+
| | |
|=================>|==============>|
/keys/claim <federation>
Key algorithms
~~~~~~~~~~~~~~
The name ``ed25519`` corresponds to the `Ed25519`_ signature algorithm. The key
is a 32-byte Ed25519 public key, encoded using `unpadded Base64`_. Example:
.. code:: json
"SogYyrkTldLz0BXP+GYWs0qaYacUI0RleEqNT8J3riQ"
The name ``curve25519`` corresponds to the `Curve25519`_ ECDH algorithm. The
key is a 32-byte Curve25519 public key, encoded using `unpadded
Base64`_. Example:
.. code:: json
"JGLn/yafz74HB2AbPLYJWIVGnKAtqECOBf11yyXac2Y"
The name ``signed_curve25519`` also corresponds to the Curve25519 algorithm,
but keys using this algorithm are objects with the properties ``key`` (giving
the Base64-encoded 32-byte Curve25519 public key), and ``signatures`` (giving a
signature for the key object, as described in `Signing JSON`_). Example:
.. code:: json
{
"key":"06UzBknVHFMwgi7AVloY7ylC+xhOhEX4PkNge14Grl8",
"signatures": {
"@user:example.com": {
"ed25519:EGURVBUNJP": "YbJva03ihSj5mPk+CHMJKUKlCXCPFXjXOK6VqBnN9nA2evksQcTGn6hwQfrgRHIDDXO2le49x7jnWJHMJrJoBQ"
}
}
}
Device keys
~~~~~~~~~~~
Each device should have one Ed25519 signing key. This key should be generated
on the device from a cryptographically secure source, and the private part of
the key should never be exported from the device. This key is used as the
fingerprint for a device by other clients.
A device will generally need to generate a number of additional keys. Details
of these will vary depending on the messaging algorithm in use.
Algorithms generally require device identity keys as well as signing keys. Some
algorithms also require one-time keys to improve their secrecy and deniability.
These keys are used once during session establishment, and are then thrown
away.
For Olm version 1, each device requires a single Curve25519 identity key, and a
number of signed Curve25519 one-time keys.
Uploading keys
~~~~~~~~~~~~~~
A device uploads the public parts of identity keys to their homeserver as a
signed JSON object, using the |/keys/upload|_ API.
The JSON object must include the public part of the device's Ed25519 key, and
must be signed by that key, as described in `Signing JSON`_.
One-time keys are also uploaded to the homeserver using the |/keys/upload|_
API.
Devices must store the private part of each key they upload. They can
discard the private part of a one-time key when they receive a message using
that key. However it's possible that a one-time key given out by a homeserver
will never be used, so the device that generates the key will never know that
it can discard the key. Therefore a device could end up trying to store too
many private keys. A device that is trying to store too many private keys may
discard keys starting with the oldest.
Tracking the device list for a user
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Before Alice can send an encrypted message to Bob, she needs a list of each of
his devices and the associated identity keys, so that she can establish an
encryption session with each device. This list can be obtained by calling
|/keys/query|_, passing Bob's user ID in the ``device_keys`` parameter.
From time to time, Bob may add new devices, and Alice will need to know this so
that she can include his new devices for later encrypted messages. A naive
solution to this would be to call |/keys/query|_ before sending each message -
however, the number of users and devices may be large and this would be
inefficient.
It is therefore expected that each client will maintain a list of devices for a
number of users (in practice, typically each user with whom we share an
encrypted room). Furthermore, it is likely that this list will need to be
persisted between invocations of the client application (to preserve device
verification data and to alert Alice if Bob suddenly gets a new
device).
Alice's client can maintain a list of Bob's devices via the following
process:
#. It first sets a flag to record that it is now tracking Bob's device list,
and a separate flag to indicate that its list of Bob's devices is
outdated. Both flags should be in storage which persists over client
restarts.
#. It then makes a request to |/keys/query|_, passing Bob's user ID in the
``device_keys`` parameter. When the request completes, it stores the
resulting list of devices in persistent storage, and clears the 'outdated'
flag.
#. During its normal processing of responses to |/sync|_, Alice's client
inspects the ``changed`` property of the |device_lists|_ field. If it is
tracking the device lists of any of the listed users, then it marks the
device lists for those users outdated, and initiates another request to
|/keys/query|_ for them.
#. Periodically, Alice's client stores the ``next_batch`` field of the result
from |/sync|_ in persistent storage. If Alice later restarts her client, it
can obtain a list of the users who have updated their device list while it
was offline by calling |/keys/changes|_, passing the recorded ``next_batch``
field as the ``from`` parameter. If the client is tracking the device list
of any of the users listed in the response, it marks them as outdated. It
combines this list with those already flagged as outdated, and initiates a
|/keys/query|_ requests for all of them.
.. Warning::
Bob may update one of his devices while Alice has a request to
``/keys/query`` in flight. Alice's client may therefore see Bob's user ID in
the ``device_lists`` field of the ``/sync`` response while the first request
is in flight, and initiate a second request to ``/keys/query``. This may
lead to either of two related problems.
The first problem is that, when the first request completes, the client will
clear the 'outdated' flag for Bob's devices. If the second request fails, or
the client is shut down before it completes, this could lead to Alice using
an outdated list of Bob's devices.
The second possibility is that, under certain conditions, the second request
may complete *before* the first one. When the first request completes, the
client could overwrite the later results from the second request with those
from the first request.
Clients MUST guard against these situations. For example, a client could
ensure that only one request to ``/keys/query`` is in flight at a time for
each user, by queuing additional requests until the first completes.
Alternatively, the client could make a new request immediately, but ensure
that the first request's results are ignored (possibly by cancelling the
request).
.. Note::
When Bob and Alice share a room, with Bob tracking Alice's devices, she may leave
the room and then add a new device. Bob will not be notified of this change,
as he doesn't share a room anymore with Alice. When they start sharing a
room again, Bob has an out-of-date list of Alice's devices. In order to address
this issue, Bob's homeserver will add Alice's user ID to the ``changed`` property of
the ``device_lists`` field, thus Bob will update his list of Alice's devices as part
of his normal processing. Note that Bob can also be notified when he stops sharing
any room with Alice by inspecting the ``left`` property of the ``device_lists``
field, and as a result should remove her from its list of tracked users.
.. |device_lists| replace:: ``device_lists``
.. _`device_lists`: `device_lists_sync`_
Sending encrypted attachments
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
When encryption is enabled in a room, files should be uploaded encrypted on
the homeserver.
In order to achieve this, a client should generate a single-use 256-bit AES
key, and encrypt the file using AES-CTR. The counter should be 64-bit long,
starting at 0 and prefixed by a random 64-bit Initialization Vector (IV), which
together form a 128-bit unique counter block.
.. Warning::
An IV must never be used multiple times with the same key. This implies that
if there are multiple files to encrypt in the same message, typically an
image and its thumbnail, the files must not share both the same key and IV.
Then, the encrypted file can be uploaded to the homeserver.
The key and the IV must be included in the room event along with the resulting
``mxc://`` in order to allow recipients to decrypt the file. As the event
containing those will be Megolm encrypted, the server will never have access to
the decrypted file.
A hash of the ciphertext must also be included, in order to prevent the homeserver from
changing the file content.
A client should send the data as an encrypted ``m.room.message`` event, using
either ``m.file`` as the msgtype, or the appropriate msgtype for the file
type. The key is sent using the `JSON Web Key`_ format, with a `W3C
extension`_.
.. anchor for link from m.message api spec
.. |encrypted_files| replace:: End-to-end encryption
.. _encrypted_files:
Extensions to ``m.message`` msgtypes
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
This module adds ``file`` and ``thumbnail_file`` properties, of type
``EncryptedFile``, to ``m.message`` msgtypes that reference files, such as
`m.file`_ and `m.image`_, replacing the ``url`` and ``thumbnail_url``
properties.
.. todo: generate this from a swagger definition?
``EncryptedFile``
========= ================ =====================================================
Parameter Type Description
========= ================ =====================================================
url string **Required.** The URL to the file.
key JWK **Required.** A `JSON Web Key`_ object.
iv string **Required.** The Initialisation Vector used by
AES-CTR, encoded as unpadded base64.
hashes {string: string} **Required.** A map from an algorithm name to a hash
of the ciphertext, encoded as unpadded base64. Clients
should support the SHA-256 hash, which uses the key
``sha256``.
v string **Required.** Version of the encrypted attachments
protocol. Must be ``v2``.
========= ================ =====================================================
``JWK``
========= ========= ============================================================
Parameter Type Description
========= ========= ============================================================
key string **Required.** Key type. Must be ``oct``.
key_opts [string] **Required.** Key operations. Must at least contain
``encrypt`` and ``decrypt``.
alg string **Required.** Algorithm. Must be ``A256CTR``.
k string **Required.** The key, encoded as urlsafe unpadded base64.
ext boolean **Required.** Extractable. Must be ``true``. This is a
`W3C extension`_.
========= ========= ============================================================
Example:
.. code :: json
{
"content": {
"body": "something-important.jpg",
"file": {
"url": "mxc://example.org/FHyPlCeYUSFFxlgbQYZmoEoe",
"mimetype": "image/jpeg",
"v": "v2",
"key": {
"alg": "A256CTR",
"ext": true,
"k": "aWF6-32KGYaC3A_FEUCk1Bt0JA37zP0wrStgmdCaW-0",
"key_ops": ["encrypt","decrypt"],
"kty": "oct"
},
"iv": "w+sE15fzSc0AAAAAAAAAAA",
"hashes": {
"sha256": "fdSLu/YkRx3Wyh3KQabP3rd6+SFiKg5lsJZQHtkSAYA"
}
},
"info": {
"mimetype": "image/jpeg",
"h": 1536,
"size": 422018,
"thumbnail_file": {
"hashes": {
"sha256": "/NogKqW5bz/m8xHgFiH5haFGjCNVmUIPLzfvOhHdrxY"
},
"iv": "U+k7PfwLr6UAAAAAAAAAAA",
"key": {
"alg": "A256CTR",
"ext": true,
"k": "RMyd6zhlbifsACM1DXkCbioZ2u0SywGljTH8JmGcylg",
"key_ops": ["encrypt", "decrypt"],
"kty": "oct"
},
"mimetype": "image/jpeg",
"url": "mxc://example.org/pmVJxyxGlmxHposwVSlOaEOv",
"v": "v2"
},
"thumbnail_info": {
"h": 768,
"mimetype": "image/jpeg",
"size": 211009,
"w": 432
},
"w": 864
},
"msgtype": "m.image"
},
"event_id": "$143273582443PhrSn:example.org",
"origin_server_ts": 1432735824653,
"room_id": "!jEsUZKDJdhlrceRyVU:example.org",
"sender": "@example:example.org",
"type": "m.room.message",
"unsigned": {
"age": 1234
}
}
Claiming one-time keys
~~~~~~~~~~~~~~~~~~~~~~
A client wanting to set up a session with another device can claim a one-time
key for that device. This is done by making a request to the |/keys/claim|_
API.
A homeserver should rate-limit the number of one-time keys that a given user or
remote server can claim. A homeserver should discard the public part of a one
time key once it has given that key to another user.
Device verification
-------------------
Before Alice sends Bob encrypted data, or trusts data received from him, she
may want to verify that she is actually communicating with him, rather than a
man-in-the-middle. This verification process requires an out-of-band channel:
there is no way to do it within Matrix without trusting the administrators of
the homeservers.
In Matrix, the basic process for device verification is for Alice to verify
that the public Ed25519 signing key she received via ``/keys/query`` for Bob's
device corresponds to the private key in use by Bob's device. For now, it is
recommended that clients provide mechanisms by which the user can see:
1. The public part of their device's Ed25519 signing key, encoded using
`unpadded Base64`_.
2. The list of devices in use for each user in a room, along with the public
Ed25519 signing key for each device, again encoded using unpadded Base64.
Alice can then meet Bob in person, or contact him via some other trusted
medium, and ask him to read out the Ed25519 key shown on his device. She
compares this with the value shown for his device on her client.
Device verification may reach one of several conclusions. For example:
* Alice may "accept" the device. This means that she is satisfied that the
device belongs to Bob. She can then encrypt sensitive material for that
device, and knows that messages received were sent from that device.
* Alice may "reject" the device. She will do this if she knows or suspects
that Bob does not control that device (or equivalently, does not trust
Bob). She will not send sensitive material to that device, and cannot trust
messages apparently received from it.
* Alice may choose to skip the device verification process. She is not able
to verify that the device actually belongs to Bob, but has no reason to
suspect otherwise. The encryption protocol continues to protect against
passive eavesdroppers.
.. NOTE::
Once the signing key has been verified, it is then up to the encryption
protocol to verify that a given message was sent from a device holding that
Ed25519 private key, or to encrypt a message so that it may only be
decrypted by such a device. For the Olm protocol, this is documented at
https://matrix.org/git/olm/about/docs/signing.rst.
.. section name changed, so make sure that old links keep working
.. _key-sharing:
Sharing keys between devices
----------------------------
If Bob has an encrypted conversation with Alice on his computer, and then logs in
through his phone for the first time, he may want to have access to the previously
exchanged messages. To address this issue, several methods are provided to
allow users to transfer keys from one device to another.
Key requests
~~~~~~~~~~~~
When a device is missing keys to decrypt messages, it can request the keys by
sending `m.room_key_request`_ to-device messages to other devices with
``action`` set to ``request``. If a device wishes to share the keys with that
device, it can forward the keys to the first device by sending an encrypted
`m.forwarded_room_key`_ to-device message. The first device should then send an
`m.room_key_request`_ to-device message with ``action`` set to
``cancel_request`` to the other devices that it had originally sent the key
request to; a device that receives a ``cancel_request`` should disregard any
previously-received ``request`` message with the same ``request_id`` and
``requesting_device_id``.
.. NOTE::
Key sharing can be a big attack vector, thus it must be done very carefully.
A reasonable stategy is for a user's client to only send keys requested by the
verified devices of the same user.
Key exports
~~~~~~~~~~~
Keys can be manually exported from one device to an encrypted file, copied to
another device, and imported. The file is encrypted using a user-supplied
passphrase, and is created as follows:
1. Encode the sessions a JSON object, formatted as described in `Key export
format`_.
2. Generate a 512-bit key from the user-entered passphrase by computing
`PBKDF2`_\(HMAC-SHA-512, passphrase, S, N, 512), where S is a 128-bit
cryptographically-random salt and N is the number of rounds. N should be at
least 100,000. The keys K and K' are set to the first and last 256 bits of
this generated key, respectively. K is used as an AES-256 key, and K' is
used as an HMAC-SHA-256 key.
3. Serialize the JSON object as a UTF-8 string, and encrypt it using
AES-CTR-256 with the key K generated above, and with a 128-bit
cryptographically-random initialization vector, IV, that has bit 63 set to
zero. (Setting bit 63 to zero in IV is needed to work around differences in
implementations of AES-CTR.)
4. Concatenate the following data:
============ ===============================================================
Size (bytes) Description
============ ===============================================================
1 Export format version, which must be ``0x01``.
16 The salt S.
16 The initialization vector IV.
4 The number of rounds N, as a big-endian unsigned 32-bit integer.
variable The encrypted JSON object.
32 The HMAC-SHA-256 of all the above string concatenated together,
using K' as the key.
============ ===============================================================
5. Base64-encode the string above. Newlines may be added to avoid overly long
lines.
6. Prepend the resulting string with ``-----BEGIN MEGOLM SESSION DATA-----``,
with a trailing newline, and append ``-----END MEGOLM SESSION DATA-----``,
with a leading and trailing newline.
Key export format
<<<<<<<<<<<<<<<<<
The exported sessions are formatted as a JSON object of type ``ExportData``
described as follows:
``ExportData``
=============== ================= ==============================================
Parameter Type Description
=============== ================= ==============================================
sessions ``[SessionData]`` Required. The sessions that are being
exported.
=============== ================= ==============================================
``SessionData``
.. table::
:widths: auto
=============================== =========== ====================================
Parameter Type Description
=============================== =========== ====================================
algorithm string Required. The encryption algorithm
that the session uses. Must be
``m.megolm.v1.aes-sha2``.
forwarding_curve25519_key_chain [string] Required. Chain of Curve25519 keys
through which this session was
forwarded, via
`m.forwarded_room_key`_ events.
room_id string Required. The room where the
session is used.
sender_key string Required. The Curve25519 key of the
device which initiated the session
originally.
sender_claimed_keys {string: Required. The Ed25519 key of the
integer} device which initiated the session
originally.
session_id string Required. The ID of the session.
session_key string Required. The key for the session.
=============================== =========== ====================================
Example:
.. code:: json
{
"sessions": [
{
"algorithm": "m.megolm.v1.aes-sha2",
"forwarding_curve25519_key_chain": [
"hPQNcabIABgGnx3/ACv/jmMmiQHoeFfuLB17tzWp6Hw"
],
"room_id": "!Cuyf34gef24t:localhost",
"sender_key": "RF3s+E7RkTQTGF2d8Deol0FkQvgII2aJDf3/Jp5mxVU",
"sender_claimed_keys": {
"ed25519": "<device ed25519 identity key>",
},
"session_id": "X3lUlvLELLYxeTx4yOVu6UDpasGEVO0Jbu+QFnm0cKQ",
"session_key": "AgAAAADxKHa9uFxcXzwYoNueL5Xqi69IkD4sni8Llf..."
},
...
]
}
Messaging Algorithms
--------------------
Messaging Algorithm Names
~~~~~~~~~~~~~~~~~~~~~~~~~
Messaging algorithm names use the extensible naming scheme used throughout this
specification. Algorithm names that start with ``m.`` are reserved for
algorithms defined by this specification. Implementations wanting to experiment
with new algorithms must be uniquely globally namespaced following Java's package
naming conventions.
Algorithm names should be short and meaningful, and should list the primitives
used by the algorithm so that it is easier to see if the algorithm is using a
broken primitive.
A name of ``m.olm.v1`` is too short: it gives no information about the primitives
in use, and is difficult to extend for different primitives. However a name of
``m.olm.v1.ecdh-curve25519-hdkfsha256.hmacsha256.hkdfsha256-aes256-cbc-hmac64sha256``
is too long despite giving a more precise description of the algorithm: it adds
to the data transfer overhead and sacrifices clarity for human readers without
adding any useful extra information.
``m.olm.v1.curve25519-aes-sha2``
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The name ``m.olm.v1.curve25519-aes-sha2`` corresponds to version 1 of the Olm
ratchet, as defined by the `Olm specification`_. This uses:
* Curve25519 for the initial key agreement.
* HKDF-SHA-256 for ratchet key derivation.
* Curve25519 for the root key ratchet.
* HMAC-SHA-256 for the chain key ratchet.
* HKDF-SHA-256, AES-256 in CBC mode, and 8 byte truncated HMAC-SHA-256 for authenticated encryption.
Devices that support Olm must include "m.olm.v1.curve25519-aes-sha2" in their
list of supported messaging algorithms, must list a Curve25519 device key, and
must publish Curve25519 one-time keys.
An event encrypted using Olm has the following format:
.. code:: json
{
"type": "m.room.encrypted",
"content": {
"algorithm": "m.olm.v1.curve25519-aes-sha2",
"sender_key": "<sender_curve25519_key>",
"ciphertext": {
"<device_curve25519_key>": {
"type": 0,
"body": "<encrypted_payload_base_64>"
}
}
}
}
``ciphertext`` is a mapping from device Curve25519 key to an encrypted payload
for that device. ``body`` is a Base64-encoded Olm message body. ``type`` is an
integer indicating the type of the message body: 0 for the initial pre-key
message, 1 for ordinary messages.
Olm sessions will generate messages with a type of 0 until they receive a
message. Once a session has decrypted a message it will produce messages with
a type of 1.
When a client receives a message with a type of 0 it must first check if it
already has a matching session. If it does then it will use that session to
try to decrypt the message. If there is no existing session then the client
must create a new session and use the new session to decrypt the message. A
client must not persist a session or remove one-time keys used by a session
until it has successfully decrypted a message using that session.
Messages with type 1 can only be decrypted with an existing session. If there
is no matching session, the client must treat this as an invalid message.
The plaintext payload is of the form:
.. code:: json
{
"type": "<type of the plaintext event>",
"content": "<content for the plaintext event>",
"sender": "<sender_user_id>",
"recipient": "<recipient_user_id>",
"recipient_keys": {
"ed25519": "<our_ed25519_key>"
},
"keys": {
"ed25519": "<sender_ed25519_key>"
}
}
The type and content of the plaintext message event are given in the payload.
Other properties are included in order to prevent an attacker from publishing
someone else's curve25519 keys as their own and subsequently claiming to have
sent messages which they didn't.
``sender`` must correspond to the user who sent the event, ``recipient`` to
the local user, and ``recipient_keys`` to the local ed25519 key.
Clients must confirm that the ``sender_key`` and the ``ed25519`` field value
under the ``keys`` property match the keys returned by |/keys/query|_ for
the given user, and must also verify the signature of the payload. Without
this check, a client cannot be sure that the sender device owns the private
part of the ed25519 key it claims to have in the Olm payload.
This is crucial when the ed25519 key corresponds to a verified device.
If a client has multiple sessions established with another device, it should
use the session from which it last received a message. A client may expire old
sessions by defining a maximum number of olm sessions that it will maintain for
each device, and expiring sessions on a Least Recently Used basis. The maximum
number of olm sessions maintained per device should be at least 4.
``m.megolm.v1.aes-sha2``
~~~~~~~~~~~~~~~~~~~~~~~~
The name ``m.megolm.v1.aes-sha2`` corresponds to version 1 of the Megolm
ratchet, as defined by the `Megolm specification`_. This uses:
* HMAC-SHA-256 for the hash ratchet.
* HKDF-SHA-256, AES-256 in CBC mode, and 8 byte truncated HMAC-SHA-256 for authenticated encryption.
* Ed25519 for message authenticity.
Devices that support Megolm must support Olm, and include "m.megolm.v1.aes-sha2" in
their list of supported messaging algorithms.
An event encrypted using Megolm has the following format:
.. code:: json
{
"type": "m.room.encrypted",
"content": {
"algorithm": "m.megolm.v1.aes-sha2",
"sender_key": "<sender_curve25519_key>",
"device_id": "<sender_device_id>",
"session_id": "<outbound_group_session_id>",
"ciphertext": "<encypted_payload_base_64>"
}
}
The encrypted payload can contain any message event. The plaintext is of the form:
.. code:: json
{
"type": "<event_type>",
"content": "<event_content>",
"room_id": "<the room_id>"
}
We include the room ID in the payload, because otherwise the homeserver would
be able to change the room a message was sent in.
Clients must guard against replay attacks by keeping track of the ratchet indices
of Megolm sessions. They should reject messages with a ratchet index that they
have already decrypted. Care should be taken in order to avoid false positives, as a
client may decrypt the same event twice as part of its normal processing.
As with Olm events, clients must confirm that the ``sender_key`` belongs to the user
who sent the message. The same reasoning applies, but the sender ed25519 key has to be
inferred from the ``keys.ed25519`` property of the event which established the Megolm
session.
In order to enable end-to-end encryption in a room, clients can send a
``m.room.encryption`` state event specifying ``m.megolm.v1.aes-sha2`` as its
``algorithm`` property.
When creating a Megolm session in a room, clients must share the corresponding session
key using Olm with the intended recipients, so that they can decrypt future messages
encrypted using this session. A ``m.room_key`` event is used to do this. Clients
must also handle ``m.room_key`` events sent by other devices in order to decrypt their
messages.
Protocol definitions
--------------------
Events
~~~~~~
{{m_room_encryption_event}}
{{m_room_encrypted_event}}
{{m_room_key_event}}
{{m_room_key_request_event}}
{{m_forwarded_room_key_event}}
Key management API
~~~~~~~~~~~~~~~~~~
{{keys_cs_http_api}}
.. anchor for link from /sync api spec
.. |device_lists_sync| replace:: End-to-end encryption
.. _device_lists_sync:
Extensions to /sync
~~~~~~~~~~~~~~~~~~~
This module adds an optional ``device_lists`` property to the |/sync|_
response, as specified below. The server need only populate this property for
an incremental ``/sync`` (ie, one where the ``since`` parameter was
specified). The client is expected to use |/keys/query|_ or |/keys/changes|_
for the equivalent functionality after an initial sync, as documented in
`Tracking the device list for a user`_.
It also adds a ``one_time_keys_count`` property. Note the spelling difference
with the ``one_time_key_counts`` property in the |/keys/upload|_ response.
.. todo: generate this from a swagger definition?
.. device_lists: { changed: ["@user:server", ... ]},
============ =========== =====================================================
Parameter Type Description
============ =========== =====================================================
device_lists DeviceLists Optional. Information on e2e device updates. Note:
only present on an incremental sync.
|device_otk| {string: Optional. For each key algorithm, the number of
integer} unclaimed one-time keys currently held on the server
for this device.
============ =========== =====================================================
``DeviceLists``
========= ========= =============================================
Parameter Type Description
========= ========= =============================================
changed [string] List of users who have updated their device identity keys,
or who now share an encrypted room with the client since
the previous sync response.
left [string] List of users with whom we do not share any encrypted rooms
anymore since the previous sync response.
========= ========= =============================================
.. NOTE::
For optimal performance, Alice should be added to ``changed`` in Bob's sync only
when she adds a new device, or when Alice and Bob now share a room but didn't
share any room previously. However, for the sake of simpler logic, a server
may add Alice to ``changed`` when Alice and Bob share a new room, even if they
previously already shared a room.
Example response:
.. code:: json
{
"next_batch": "s72595_4483_1934",
"rooms": {"leave": {}, "join": {}, "invite": {}},
"device_lists": {
"changed": [
"@alice:example.com",
],
"left": [
"@bob:example.com",
],
},
"device_one_time_keys_count": {
"curve25519": 10,
"signed_curve25519": 20
}
}
.. References
.. _ed25519: http://ed25519.cr.yp.to/
.. _curve25519: https://cr.yp.to/ecdh.html
.. _`Olm specification`: http://matrix.org/docs/spec/olm.html
.. _`Megolm specification`: http://matrix.org/docs/spec/megolm.html
.. _`JSON Web Key`: https://tools.ietf.org/html/rfc7517#appendix-A.3
.. _`W3C extension`: https://w3c.github.io/webcrypto/#iana-section-jwk
.. _`PBKDF2`: https://tools.ietf.org/html/rfc2898#section-5.2
.. _`Signing JSON`: ../appendices.html#signing-json
.. |m.olm.v1.curve25519-aes-sha2| replace:: ``m.olm.v1.curve25519-aes-sha2``
.. |device_otk| replace:: device_one_time_keys_count
.. |/keys/upload| replace:: ``/keys/upload``
.. _/keys/upload: #post-matrix-client-%CLIENT_MAJOR_VERSION%-keys-upload
.. |/keys/query| replace:: ``/keys/query``
.. _/keys/query: #post-matrix-client-%CLIENT_MAJOR_VERSION%-keys-query
.. |/keys/claim| replace:: ``/keys/claim``
.. _/keys/claim: #post-matrix-client-%CLIENT_MAJOR_VERSION%-keys-claim
.. |/keys/changes| replace:: ``/keys/changes``
.. _/keys/changes: #get-matrix-client-%CLIENT_MAJOR_VERSION%-keys-changes