You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
matrix-spec/specification/server_server_api.rst

1247 lines
51 KiB
ReStructuredText

.. Copyright 2016 OpenMarket Ltd
.. Copyright 2017-2019 New Vector Ltd
..
.. Licensed under the Apache License, Version 2.0 (the "License");
.. you may not use this file except in compliance with the License.
.. You may obtain a copy of the License at
..
.. http://www.apache.org/licenses/LICENSE-2.0
..
.. Unless required by applicable law or agreed to in writing, software
.. distributed under the License is distributed on an "AS IS" BASIS,
.. WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
.. See the License for the specific language governing permissions and
.. limitations under the License.
Federation API
==============
{{unstable_warning_block_SERVER_RELEASE_LABEL}}
Matrix homeservers use the Federation APIs (also known as server-server APIs)
to communicate with each other. Homeservers use these APIs to push messages to
each other in real-time, to retrieve historic messages from each other, and to
query profile and presence information about users on each other's servers.
The APIs are implemented using HTTPS requests between each of the servers.
These HTTPS requests are strongly authenticated using public key signatures
at the TLS transport layer and using public key signatures in HTTP
Authorization headers at the HTTP layer.
There are three main kinds of communication that occur between homeservers:
Persisted Data Units (PDUs):
These events are broadcast from one homeserver to any others that have
joined the same room (identified by Room ID). They are persisted in
long-term storage and record the history of messages and state for a
room.
Like email, it is the responsibility of the originating server of a PDU
to deliver that event to its recipient servers. However PDUs are signed
using the originating server's private key so that it is possible to
deliver them through third-party servers.
Ephemeral Data Units (EDUs):
These events are pushed between pairs of homeservers. They are not
persisted and are not part of the history of a room, nor does the
receiving homeserver have to reply to them.
Queries:
These are single request/response interactions between a given pair of
servers, initiated by one side sending an HTTPS GET request to obtain some
information, and responded by the other. They are not persisted and contain
no long-term significant history. They simply request a snapshot state at
the instant the query is made.
EDUs and PDUs are further wrapped in an envelope called a Transaction, which is
transferred from the origin to the destination homeserver using an HTTPS PUT
request.
.. contents:: Table of Contents
.. sectnum::
Changelog
---------
.. topic:: Version: %SERVER_RELEASE_LABEL%
{{server_server_changelog}}
This version of the specification is generated from
`matrix-doc <https://github.com/matrix-org/matrix-doc>`_ as of Git commit
`{{git_version}} <https://github.com/matrix-org/matrix-doc/tree/{{git_rev}}>`_.
For the full historical changelog, see
https://github.com/matrix-org/matrix-doc/blob/master/changelogs/server_server.rst
Other versions of this specification
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The following other versions are also available, in reverse chronological order:
- `HEAD <https://matrix.org/docs/spec/server_server/unstable.html>`_: Includes all changes since the latest versioned release.
- `r0.1.1 <https://matrix.org/docs/spec/server_server/r0.1.1.html>`_
- `r0.1.0 <https://matrix.org/docs/spec/server_server/r0.1.0.html>`_
API standards
-------------
The mandatory baseline for client-server communication in Matrix is exchanging
JSON objects over HTTP APIs. More efficient optional transports will in future
be supported as optional extensions - e.g. a packed binary encoding over
stream-cipher encrypted TCP socket for low-bandwidth/low-roundtrip mobile usage.
For the default HTTP transport, all API calls use a Content-Type of
``application/json``. In addition, all strings MUST be encoded as UTF-8.
Server discovery
----------------
Resolving server names
~~~~~~~~~~~~~~~~~~~~~~
Each Matrix homeserver is identified by a server name consisting of a hostname
and an optional port, as described by the `grammar
<../appendices.html#server-name>`_. Where applicable, a delegated server name
uses the same grammar.
Server names are resolved to an IP address and port to connect to, and have
various conditions affecting which certificates and ``Host`` headers to send.
The process overall is as follows:
.. Note from the author: The repetitive "use this Host header and this cert"
comments are intentional. The process is overall quite complicated, and
explaining explicitly what requests look like at each step helps ease the
understanding and ensure everyone is on the same page. Implementations
are of course welcome to realize where the process can be optimized, and
do so - just ensure that the result is the same!
1. If the hostname is an IP literal, then that IP address should be used,
together with the given port number, or 8448 if no port is given. The
target server must present a valid certificate for the IP address.
The ``Host`` header in the request should be set to the server name,
including the port if the server name included one.
2. If the hostname is not an IP literal, and the server name includes an
explicit port, resolve the IP address using AAAA or A records. Requests
are made to the resolved IP address and given port with a ``Host`` header
of the original server name (with port). The target server must present a
valid certificate for the hostname.
3. If the hostname is not an IP literal, a regular HTTPS request is made
to ``https://<hostname>/.well-known/matrix/server``, expecting the
schema defined later in this section. 30x redirects should be followed,
however redirection loops should be avoided. Responses (successful or
otherwise) to the ``/.well-known`` endpoint should be cached by the
requesting server. Servers should respect the cache control headers
present on the response, or use a sensible default when headers are not
present. The recommended sensible default is 24 hours. Servers should
additionally impose a maximum cache time for responses: 48 hours is
recommended. Errors are recommended to be cached for up to an hour,
and servers are encouraged to exponentially back off for repeated
failures. The schema of the ``/.well-known`` request is later in this
section. If the response is invalid (bad JSON, missing properties, non-200
response, etc), skip to step 4. If the response is valid, the ``m.server``
property is parsed as ``<delegated_hostname>[:<delegated_port>]`` and
processed as follows:
* If ``<delegated_hostname>`` is an IP literal, then that IP address
should be used together with the ``<delegated_port>`` or 8448 if no
port is provided. The target server must present a valid TLS certificate
for the IP address. Requests must be made with a ``Host`` header containing
the IP address, including the port if one was provided.
* If ``<delegated_hostname>`` is not an IP literal, and ``<delegated_port>``
is present, an IP address is discovered by looking up an AAAA or A
record for ``<delegated_hostname>``. The resulting IP address is
used, alongside the ``<delegated_port>``. Requests must be made with a
``Host`` header of ``<delegated_hostname>:<delegated_port>``. The
target server must present a valid certificate for ``<delegated_hostname>``.
* If ``<delegated_hostname>`` is not an IP literal and no
``<delegated_port>`` is present, an SRV record is looked up for
``_matrix._tcp.<delegated_hostname>``. This may result in another
hostname (to be resolved using AAAA or A records) and port. Requests
should be made to the resolved IP address and port with a ``Host``
header containing the ``<delegated_hostname>``. The target server
must present a valid certificate for ``<delegated_hostname>``.
* If no SRV record is found, an IP address is resolved using AAAA
or A records. Requests are then made to the resolve IP address
and a port of 8448, using a ``Host`` header of ``<delegated_hostname>``.
The target server must present a valid certificate for ``<delegated_hostname>``.
4. If the ``/.well-known`` request resulted in an error response, a server
is found by resolving an SRV record for ``_matrix._tcp.<hostname>``. This
may result in a hostname (to be resolved using AAAA or A records) and
port. Requests are made to the resolved IP address and port, using 8448
as a default port, with a ``Host`` header of ``<hostname>``. The target
server must present a valid certificate for ``<hostname>``.
5. If the ``/.well-known`` request returned an error response, and the SRV
record was not found, an IP address is resolved using AAAA and A records.
Requests are made to the resolved IP address using port 8448 and a ``Host``
header containing the ``<hostname>``. The target server must present a
valid certificate for ``<hostname>``.
The TLS certificate provided by the target server must be signed by a known
Certificate Authority. Servers are ultimately responsible for determining
the trusted Certificate Authorities, however are strongly encouraged to
rely on the operating system's judgement. Servers can offer administrators
a means to override the trusted authorities list. Servers can additionally
skip the certificate validation for a given whitelist of domains or netmasks
for the purposes of testing or in networks where verification is done
elsewhere, such as with ``.onion`` addresses. Servers should respect SNI
when making requests where possible: a SNI should be sent for the certificate
which is expected, unless that certificate is expected to be an IP address in
which case SNI is not supported and should not be sent.
Servers are encouraged to make use of the
`Certificate Transparency <https://www.certificate-transparency.org/>`_ project.
{{wellknown_ss_http_api}}
Server implementation
~~~~~~~~~~~~~~~~~~~~~~
{{version_ss_http_api}}
Retrieving server keys
~~~~~~~~~~~~~~~~~~~~~~
.. NOTE::
There was once a "version 1" of the key exchange. It has been removed from the
specification due to lack of significance. It may be reviewed `from the historical draft
<https://github.com/matrix-org/matrix-doc/blob/51faf8ed2e4a63d4cfd6d23183698ed169956cc0/specification/server_server_api.rst#232version-1>`_.
6 years ago
Each homeserver publishes its public keys under ``/_matrix/key/v2/server/{keyId}``.
Homeservers query for keys by either getting ``/_matrix/key/v2/server/{keyId}``
directly or by querying an intermediate notary server using a
``/_matrix/key/v2/query/{serverName}/{keyId}`` API. Intermediate notary servers
query the ``/_matrix/key/v2/server/{keyId}`` API on behalf of another server and
sign the response with their own key. A server may query multiple notary servers to
ensure that they all report the same public keys.
This approach is borrowed from the `Perspectives Project`_, but modified to
include the NACL keys and to use JSON instead of XML. It has the advantage of
avoiding a single trust-root since each server is free to pick which notary
servers they trust and can corroborate the keys returned by a given notary
server by querying other servers.
.. _Perspectives Project: https://web.archive.org/web/20170702024706/https://perspectives-project.org/
Publishing Keys
+++++++++++++++
Homeservers publish their signing keys in a JSON
object at ``/_matrix/key/v2/server/{key_id}``. The response contains a list of
``verify_keys`` that are valid for signing federation requests made by the
homeserver and for signing events. It contains a list of ``old_verify_keys`` which
are only valid for signing events.
{{keys_server_ss_http_api}}
6 years ago
Querying Keys Through Another Server
++++++++++++++++++++++++++++++++++++
Servers may query another server's keys through a notary server. The notary
server may be another homeserver. The notary server will retrieve keys from
the queried servers through use of the ``/_matrix/key/v2/server/{keyId}``
API. The notary server will additionally sign the response from the queried
server before returning the results.
Notary servers can return keys for servers that are offline or having issues
serving their own keys by using cached responses. Keys can be queried from
multiple servers to mitigate against DNS spoofing.
{{keys_query_ss_http_api}}
Authentication
--------------
Request Authentication
~~~~~~~~~~~~~~~~~~~~~~
Every HTTP request made by a homeserver is authenticated using public key
digital signatures. The request method, target and body are signed by wrapping
them in a JSON object and signing it using the JSON signing algorithm. The
resulting signatures are added as an Authorization header with an auth scheme
of ``X-Matrix``. Note that the target field should include the full path
starting with ``/_matrix/...``, including the ``?`` and any query parameters if
present, but should not include the leading ``https:``, nor the destination
server's hostname.
Step 1 sign JSON:
.. code::
{
"method": "GET",
"uri": "/target",
"origin": "origin.hs.example.com",
"destination": "destination.hs.example.com",
"content": <request body>,
"signatures": {
"origin.hs.example.com": {
"ed25519:key1": "ABCDEF..."
}
}
}
Step 2 add Authorization header:
.. code::
GET /target HTTP/1.1
Authorization: X-Matrix origin=origin.example.com,key="ed25519:key1",sig="ABCDEF..."
Content-Type: application/json
<JSON-encoded request body>
Example python code:
.. code:: python
def authorization_headers(origin_name, origin_signing_key,
destination_name, request_method, request_target,
content=None):
request_json = {
"method": request_method,
"uri": request_target,
"origin": origin_name,
"destination": destination_name,
}
if content_json is not None:
request["content"] = content
signed_json = sign_json(request_json, origin_name, origin_signing_key)
authorization_headers = []
for key, sig in signed_json["signatures"][origin_name].items():
authorization_headers.append(bytes(
"X-Matrix origin=%s,key=\"%s\",sig=\"%s\"" % (
origin_name, key, sig,
)
))
return ("Authorization", authorization_headers)
Response Authentication
~~~~~~~~~~~~~~~~~~~~~~~
Responses are authenticated by the TLS server certificate. A homeserver should
not send a request until it has authenticated the connected server to avoid
leaking messages to eavesdroppers.
Client TLS Certificates
~~~~~~~~~~~~~~~~~~~~~~~
Requests are authenticated at the HTTP layer rather than at the TLS layer
because HTTP services like Matrix are often deployed behind load balancers that
handle the TLS and these load balancers make it difficult to check TLS client
certificates.
A homeserver may provide a TLS client certificate and the receiving homeserver
may check that the client certificate matches the certificate of the origin
homeserver.
Transactions
------------
The transfer of EDUs and PDUs between homeservers is performed by an exchange
of Transaction messages, which are encoded as JSON objects, passed over an HTTP
PUT request. A Transaction is meaningful only to the pair of homeservers that
exchanged it; they are not globally-meaningful.
Transactions are limited in size; they can have at most 50 PDUs and 100 EDUs.
{{transactions_ss_http_api}}
.. _`Persistent Data Unit schema`:
PDUs
----
Each PDU contains a single Room Event which the origin server wants to send to
the destination.
The ``prev_events`` field of a PDU identifies the "parents" of the event, and
thus establishes a partial ordering on events within the room by linking them
into a Directed Acyclic Graph (DAG). The sending server should populate this
field with all of the events in the room for which it has not yet seen a
child - thus demonstrating that the event comes after all other known events.
For example, consider a room whose events form the DAG shown below. A server
creating a new event in this room should populate the new event's
``prev_events`` field with ``E4`` and ``E5``, since neither event yet has a child::
E1
^
|
+-> E2 <-+
| |
E3 E5
^
|
E4
.. _`auth events selection`:
The ``auth_events`` field of a PDU identifies the set of events which give the
sender permission to send the event. The ``auth_events`` for the
``m.room.create`` event in a room is empty; for other events, it should be the
following subset of the room state:
- The ``m.room.create`` event.
- The current ``m.room.power_levels`` event, if any.
- The sender's current ``m.room.member`` event, if any.
- If type is ``m.room.member``:
- The target's current ``m.room.member`` event, if any.
6 years ago
- If ``membership`` is ``join`` or ``invite``, the current
``m.room.join_rules`` event, if any.
6 years ago
- If membership is ``invite`` and ``content`` contains a
``third_party_invite`` property, the current
6 years ago
``m.room.third_party_invite`` event with ``state_key`` matching
6 years ago
``content.third_party_invite.signed.token``, if any.
For a full schema of what a PDU looks like, see the `room version specification`_.
6 years ago
Checks performed on receipt of a PDU
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Whenever a server receives an event from a remote server, the receiving server
must ensure that the event:
1. Is a valid event, otherwise it is dropped.
2. Passes signature checks, otherwise it is dropped.
3. Passes hash checks, otherwise it is redacted before being processed
further.
4. Passes authorization rules based on the event's auth events, otherwise it
is rejected.
5. Passes authorization rules based on the state at the event, otherwise it
is rejected.
6. Passes authorization rules based on the current state of the room, otherwise it
is "soft failed".
Further details of these checks, and how to handle failures, are described
below.
The `Signing Events <#signing-events>`_ section has more information on which hashes
and signatures are expected on events, and how to calculate them.
6 years ago
Definitions
+++++++++++
Required Power Level
A given event type has an associated *required power level*. This is given by
the current ``m.room.power_levels`` event. The event type is either listed
explicitly in the ``events`` section or given by either ``state_default`` or
``events_default`` depending on if the event is a state event or not.
Invite Level, Kick Level, Ban Level, Redact Level
The levels given by the ``invite``, ``kick``, ``ban``, and ``redact``
properties in the current ``m.room.power_levels`` state. Each defaults to 50
if unspecified.
Target User
For an ``m.room.member`` state event, the user given by the ``state_key`` of
the event.
.. _`authorization rules`:
6 years ago
Authorization rules
+++++++++++++++++++
The rules governing whether an event is authorized depends on a set of state. A
given event is checked multiple times against different sets of state, as
specified above. Each room version can have a different algorithm for how the
rules work, and which rules are applied. For more detailed information, please
see the `room version specification`_.
Rejection
+++++++++
If an event is rejected it should neither be relayed to clients nor be included
as a prev event in any new events generated by the server. Subsequent events
from other servers that reference rejected events should be allowed if they
still pass the auth rules. The state used in the checks should be calculated as
normal, except not updating with the rejected event where it is a state event.
If an event in an incoming transaction is rejected, this should not cause the
transaction request to be responded to with an error response.
.. NOTE::
This means that events may be included in the room DAG even though they
should be rejected.
6 years ago
.. NOTE::
This is in contrast to redacted events which can still affect the
state of the room. For example, a redacted ``join`` event will still
result in the user being considered joined.
Soft failure
++++++++++++
.. admonition:: Rationale
It is important that we prevent users from evading bans (or other power
restrictions) by creating events which reference old parts of the DAG. For
example, a banned user could continue to send messages to a room by having
their server send events which reference the event before they were banned.
Note that such events are entirely valid, and we cannot simply reject them, as
it is impossible to distinguish such an event from a legitimate one which has
been delayed. We must therefore accept such events and let them participate in
state resolution and the federation protocol as normal. However, servers may
choose not to send such events on to their clients, so that end users won't
actually see the events.
When this happens it is often fairly obvious to servers, as they can see that
the new event doesn't actually pass auth based on the "current state" (i.e.
the resolved state across all forward extremities). While the event is
technically valid, the server can choose to not notify clients about the new
event.
This discourages servers from sending events that evade bans etc. in this way,
as end users won't actually see the events.
When the homeserver receives a new event over federation it should also check
whether the event passes auth checks based on the current state of the room (as
well as based on the state at the event). If the event does not pass the auth
checks based on the *current state* of the room (but does pass the auth checks
based on the state at that event) it should be "soft failed".
When an event is "soft failed" it should not be relayed to the client nor be
referenced by new events created by the homeserver (i.e. they should not be
added to the server's list of forward extremities of the room). Soft failed
events are otherwise handled as usual.
.. NOTE::
Soft failed events participate in state resolution as normal if further events
are received which reference it. It is the job of the state resolution
algorithm to ensure that malicious events cannot be injected into the room
state via this mechanism.
.. NOTE::
Because soft failed state events participate in state resolution as normal, it
is possible for such events to appear in the current state of the room. In
that case the client should be told about the soft failed event in the usual
way (e.g. by sending it down in the ``state`` section of a sync response).
.. NOTE::
A soft failed event should be returned in response to federation requests
where appropriate (e.g. in ``/event/<event_id>``). Note that soft failed
events are returned in ``/backfill`` and ``/get_missing_events`` responses
only if the requests include events referencing the soft failed events.
.. admonition:: Example
As an example consider the event graph::
A
/
B
where ``B`` is a ban of a user ``X``. If the user ``X`` tries to set the topic
by sending an event ``C`` while evading the ban::
A
/ \
B C
servers that receive ``C`` after ``B`` should soft fail event ``C``, and so
will neither relay ``C`` to its clients nor send any events referencing ``C``.
If later another server sends an event ``D`` that references both ``B`` and
``C`` (this can happen if it received ``C`` before ``B``)::
A
/ \
B C
\ /
D
then servers will handle ``D`` as normal. ``D`` is sent to the servers'
clients (assuming ``D`` passes auth checks). The state at ``D`` may resolve to
a state that includes ``C``, in which case clients should also to be told that
the state has changed to include ``C``. (*Note*: This depends on the exact
state resolution algorithm used. In the original version of the algorithm
``C`` would be in the resolved state, whereas in latter versions the algorithm
tries to prioritise the ban over the topic change.)
Note that this is essentially equivalent to the situation where one server
doesn't receive ``C`` at all, and so asks another server for the state of the
``C`` branch.
Let's go back to the graph before ``D`` was sent::
A
/ \
B C
If all the servers in the room saw ``B`` before ``C`` and so soft fail ``C``,
then any new event ``D'`` will not reference ``C``::
A
/ \
B C
|
D
Retrieving event authorization information
++++++++++++++++++++++++++++++++++++++++++
The homeserver may be missing event authorization information, or wish to check
with other servers to ensure it is receiving the correct auth chain. These APIs
give the homeserver an avenue for getting the information it needs.
{{event_auth_ss_http_api}}
EDUs
----
EDUs, by comparison to PDUs, do not have an ID, a room ID, or a list of
"previous" IDs. They are intended to be non-persistent data such as user
presence, typing notifications, etc.
{{definition_ss_edu}}
Room State Resolution
---------------------
The *state* of a room is a map of ``(event_type, state_key)`` to
``event_id``. Each room starts with an empty state, and each state event which
is accepted into the room updates the state of that room.
Where each event has a single ``prev_event``, it is clear what the state of the
room after each event should be. However, when two branches in the event graph
merge, the state of those branches might differ, so a *state resolution*
algorithm must be used to determine the resultant state.
For example, consider the following event graph (where the oldest event, E0,
is at the top)::
E0
|
E1
/ \
E2 E4
| |
E3 |
\ /
E5
Suppose E3 and E4 are both ``m.room.name`` events which set the name of the
room. What should the name of the room be at E5?
The algorithm to be used for state resolution depends on the room version. For
a description of each room version's algorithm, please see the `room version specification`_.
Backfilling and retrieving missing events
-----------------------------------------
Once a homeserver has joined a room, it receives all the events emitted by
other homeservers in that room, and is thus aware of the entire history of the
room from that moment onwards. Since users in that room are able to request the
history by the ``/messages`` client API endpoint, it's possible that they might
step backwards far enough into history before the homeserver itself was a
member of that room.
To cover this case, the federation API provides a server-to-server analog of
the ``/messages`` client API, allowing one homeserver to fetch history from
another. This is the ``/backfill`` API.
To request more history, the requesting homeserver picks another homeserver
that it thinks may have more (most likely this should be a homeserver for
some of the existing users in the room at the earliest point in history it
has currently), and makes a ``/backfill`` request.
Similar to backfilling a room's history, a server may not have all the events
in the graph. That server may use the ``/get_missing_events`` API to acquire
the events it is missing.
.. TODO-spec
Specify (or remark that it is unspecified) how the server handles divergent
history. DFS? BFS? Anything weirder?
{{backfill_ss_http_api}}
Retrieving events
-----------------
In some circumstances, a homeserver may be missing a particular event or information
about the room which cannot be easily determined from backfilling. These APIs provide
homeservers with the option of getting events and the state of the room at a given
point in the timeline.
{{events_ss_http_api}}
Joining Rooms
-------------
When a new user wishes to join a room that the user's homeserver already knows
about, the homeserver can immediately determine if this is allowable by
inspecting the state of the room. If it is acceptable, it can generate, sign,
and emit a new ``m.room.member`` state event adding the user into that room.
When the homeserver does not yet know about the room it cannot do this
directly. Instead, it must take a longer multi-stage handshaking process by
which it first selects a remote homeserver which is already participating in
that room, and use it to assist in the joining process. This is the remote
join handshake.
This handshake involves the homeserver of the new member wishing to join
(referred to here as the "joining" server), the directory server hosting the
room alias the user is requesting to join with, and a homeserver where existing
room members are already present (referred to as the "resident" server).
In summary, the remote join handshake consists of the joining server querying
the directory server for information about the room alias; receiving a room ID
and a list of join candidates. The joining server then requests information
about the room from one of the residents. It uses this information to construct
a ``m.room.member`` event which it finally sends to a resident server.
Conceptually these are three different roles of homeserver. In practice the
directory server is likely to be resident in the room, and so may be selected
by the joining server to be the assisting resident. Likewise, it is likely that
the joining server picks the same candidate resident for both phases of event
construction, though in principle any valid candidate may be used at each time.
Thus, any join handshake can potentially involve anywhere from two to four
homeservers, though most in practice will use just two.
::
Client Joining Directory Resident
Server Server Server
join request -->
|
directory request ------->
<---------- directory response
|
make_join request ----------------------->
<------------------------------- make_join response
|
send_join request ----------------------->
<------------------------------- send_join response
|
<---------- join response
The first part of the handshake usually involves using the directory server to
request the room ID and join candidates through the |/query/directory|_
API endpoint. In the case of a new user joining a room as a result of a received
invite, the joining user's homeserver could optimise this step away by picking
the origin server of that invite message as the join candidate. However, the
joining server should be aware that the origin server of the invite might since
have left the room, so should be prepared to fall back on the regular join flow
if this optimisation fails.
Once the joining server has the room ID and the join candidates, it then needs
to obtain enough information about the room to fill in the required fields of
the ``m.room.member`` event. It obtains this by selecting a resident from the
candidate list, and using the ``GET /make_join`` endpoint. The resident server
will then reply with enough information for the joining server to fill in the
event.
The joining server is expected to add or replace the ``origin``, ``origin_server_ts``,
and ``event_id`` on the templated event received by the resident server. This
event is then signed by the joining server.
To complete the join handshake, the joining server must now submit this new
6 years ago
event to a resident homeserver, by using the ``PUT /send_join`` endpoint.
The resident homeserver then accepts this event into the room's event graph,
and responds to the joining server with the full set of state for the
newly-joined room. The resident server must also send the event to other servers
participating in the room.
{{joins_ss_http_api}}
.. TODO-spec
- (paul) I don't really understand why the full auth_chain events are given
here. What purpose does it serve expanding them out in full, when surely
they'll appear in the state anyway?
Inviting to a room
------------------
When a user on a given homeserver invites another user on the same homeserver,
the homeserver may sign the membership event itself and skip the process defined
here. However, when a user invites another user on a different homeserver, a request
to that homeserver to have the event signed and verified must be made.
{{invites_v1_ss_http_api}}
{{invites_v2_ss_http_api}}
Leaving Rooms (Rejecting Invites)
---------------------------------
Normally homeservers can send appropriate ``m.room.member`` events to have users
leave the room, or to reject local invites. Remote invites from other homeservers
do not involve the server in the graph and therefore need another approach to
reject the invite. Joining the room and promptly leaving is not recommended as
clients and servers will interpret that as accepting the invite, then leaving the
room rather than rejecting the invite.
Similar to the `Joining Rooms`_ handshake, the server which wishes to leave the
room starts with sending a ``/make_leave`` request to a resident server. In the
case of rejecting invites, the resident server may be the server which sent the
invite. After receiving a template event from ``/make_leave``, the leaving server
signs the event and replaces the ``event_id`` with it's own. This is then sent to
the resident server via ``/send_leave``. The resident server will then send the
event to other servers in the room.
{{leaving_ss_http_api}}
Third-party invites
-------------------
.. NOTE::
More information about third party invites is available in the `Client-Server API`_
under the Third Party Invites module.
When an user wants to invite another user in a room but doesn't know the Matrix
ID to invite, they can do so using a third-party identifier (e.g. an e-mail or a
phone number).
This identifier and its bindings to Matrix IDs are verified by an identity server
implementing the `Identity Service API`_.
Cases where an association exists for a third-party identifier
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If the third-party identifier is already bound to a Matrix ID, a lookup request
on the identity server will return it. The invite is then processed by the inviting
homeserver as a standard ``m.room.member`` invite event. This is the simplest case.
Cases where an association doesn't exist for a third-party identifier
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If the third-party identifier isn't bound to any Matrix ID, the inviting
homeserver will request the identity server to store an invite for this identifier
and to deliver it to whoever binds it to its Matrix ID. It will also send a
``m.room.third_party_invite`` event in the room to specify a display name, a token
and public keys the identity server provided as a response to the invite storage
request.
When a third-party identifier with pending invites gets bound to a Matrix ID,
the identity server will send a POST request to the ID's homeserver as described
in the `Invitation Storage`_ section of the Identity Service API.
The following process applies for each invite sent by the identity server:
The invited homeserver will create a ``m.room.member`` invite event containing
a special ``third_party_invite`` section containing the token and a signed object,
both provided by the identity server.
If the invited homeserver is in the room the invite came from, it can auth the
event and send it.
However, if the invited homeserver isn't in the room the invite came from, it
will need to request the room's homeserver to auth the event.
{{third_party_invite_ss_http_api}}
Verifying the invite
++++++++++++++++++++
When a homeserver receives a ``m.room.member`` invite event for a room it's in
with a ``third_party_invite`` object, it must verify that the association between
the third-party identifier initially invited to the room and the Matrix ID that
7 years ago
claims to be bound to it has been verified without having to rely on a third-party
server.
To do so, it will fetch from the room's state events the ``m.room.third_party_invite``
event for which the state key matches with the value for the ``token`` key in the
``third_party_invite`` object from the ``m.room.member`` event's content to fetch the
public keys initially delivered by the identity server that stored the invite.
It will then use these keys to verify that the ``signed`` object (in the
``third_party_invite`` object from the ``m.room.member`` event's content) was
signed by the same identity server.
Since this ``signed`` object can only be delivered once in the POST request
emitted by the identity server upon binding between the third-party identifier
and the Matrix ID, and contains the invited user's Matrix ID and the token
delivered when the invite was stored, this verification will prove that the
``m.room.member`` invite event comes from the user owning the invited third-party
identifier.
Public Room Directory
---------------------
6 years ago
To complement the `Client-Server API`_'s room directory, homeservers need a
way to query the public rooms for another server. This can be done by making
a request to the ``/publicRooms`` endpoint for the server the room directory
should be retrieved for.
{{public_rooms_ss_http_api}}
Typing Notifications
--------------------
When a server's users send typing notifications, those notifications need to
be sent to other servers in the room so their users are aware of the same
state. Receiving servers should verify that the user is in the room, and is
a user belonging to the sending server.
{{definition_ss_event_schemas_m_typing}}
Presence
--------
The server API for presence is based entirely on exchange of the following
EDUs. There are no PDUs or Federation Queries involved.
Servers should only send presence updates for users that the receiving server
would be interested in. Such as the receiving server sharing a room
with a given user.
.. TODO-doc
- Explain the timing-based round-trip reduction mechanism for presence
messages
- Explain the zero-byte presence inference logic
See also: docs/client-server/model/presence
{{definition_ss_event_schemas_m_presence}}
Receipts
--------
Receipts are EDUs used to communicate a marker for a given event. Currently the
only kind of receipt supported is a "read receipt", or where in the event graph
the user has read up to.
Read receipts for events events that a user sent do not need to be sent. It is
implied that by sending the event the user has read up to the event.
{{definition_ss_event_schemas_m_receipt}}
Querying for information
------------------------
Queries are a way to retrieve information from a homeserver about a resource,
such as a user or room. The endpoints here are often called in conjunction with
a request from a client on the client-server API in order to complete the call.
There are several types of queries that can be made. The generic endpoint to
represent all queries is described first, followed by the more specific queries
that can be made.
{{query_ss_http_api}}
OpenID
------
Third party services can exchange an access token previously generated by the
`Client-Server API` for information about a user. This can help verify that a
user is who they say they are without granting full access to the user's account.
Access tokens generated by the OpenID API are only good for the OpenID API and
nothing else.
{{openid_ss_http_api}}
Device Management
-----------------
Details of a user's devices must be efficiently published to other users and kept
up-to-date. This is critical for reliable end-to-end encryption, in order for users
to know which devices are participating in a room. It's also required for to-device
messaging to work. This section is intended to complement the `Device Management module`_
of the Client-Server API.
Matrix currently uses a custom pubsub system for synchronising information
about the list of devices for a given user over federation. When a server
wishes to determine a remote user's device list for the first time,
it should populate a local cache from the result of a ``/user/keys/query`` API
on the remote server. However, subsequent updates to the cache should be applied
by consuming ``m.device_list_update`` EDUs. Each new ``m.device_list_update`` EDU
describes an incremental change to one device for a given user which should replace
any existing entry in the local server's cache of that device list. Servers must send
``m.device_list_update`` EDUs to all the servers who share a room with a given
local user, and must be sent whenever that user's device list changes (i.e. for new or
6 years ago
deleted devices, when that user joins a room which contains servers which are not
already receiving updates for that user's device list, or changes in device information
such as the device's human-readable name).
Servers send ``m.device_list_update`` EDUs in a sequence per origin user, each with
a unique ``stream_id``. They also include a pointer to the most recent previous EDU(s)
that this update is relative to in the ``prev_id`` field. To simplify implementation
for clustered servers which could send multiple EDUs at the same time, the ``prev_id``
field should include all ``m.device_list_update`` EDUs which have not been yet been
referenced in a EDU. If EDUs are emitted in series by a server, there should only ever
be one ``prev_id`` in the EDU.
This forms a simple directed acyclic graph of ``m.device_list_update`` EDUs, showing
which EDUs a server needs to have received in order to apply an update to its local
copy of the remote user's device list. If a server receives an EDU which refers to
a ``prev_id`` it does not recognise, it must resynchronise its list by calling the
``/user/keys/query API`` and resume the process. The response contains a ``stream_id``
which should be used to correlate with subsequent ``m.device_list_update`` EDUs.
.. TODO: this whole thing desperately feels like it should just be state in a room,
rather than inventing a whole different DAG. The same room could be used for
profiles etc.
{{user_devices_ss_http_api}}
{{definition_ss_event_schemas_m_device_list_update}}
End-to-End Encryption
---------------------
6 years ago
This section complements the `End-to-End Encryption module`_ of the Client-Server
API. For detailed information about end-to-end encryption, please see that module.
The APIs defined here are designed to be able to proxy much of the client's request
through to federation, and have the response also be proxied through to the client.
{{user_keys_ss_http_api}}
Send-to-device messaging
------------------------
.. TODO: add modules to the federation spec and make this a module
6 years ago
The server API for send-to-device messaging is based on the
``m.direct_to_device`` EDU. There are no PDUs or Federation Queries involved.
Each send-to-device message should be sent to the destination server using
the following EDU:
{{definition_ss_event_schemas_m_direct_to_device}}
6 years ago
Content Repository
------------------
Attachments to events (images, files, etc) are uploaded to a homeserver via the
Content Repository described in the `Client-Server API`_. When a server wishes
to serve content originating from a remote server, it needs to ask the remote
server for the media.
Servers should use the server described in the Matrix Content URI, which has the
format ``mxc://{ServerName}/{MediaID}``. Servers should use the download endpoint
described in the `Client-Server API`_, being sure to use the ``allow_remote``
parameter (set to ``false``).
Server Access Control Lists (ACLs)
----------------------------------
Server ACLs and their purpose are described in the `Server ACLs`_ section of the
Client-Server API.
When a remote server makes a request, it MUST be verified to be allowed by the
server ACLs. If the server is denied access to a room, the receiving server
MUST reply with a 403 HTTP status code and an ``errcode`` of ``M_FORBIDDEN``.
The following endpoint prefixes MUST be protected:
* ``/_matrix/federation/v1/send`` (on a per-PDU basis)
* ``/_matrix/federation/v1/make_join``
* ``/_matrix/federation/v1/make_leave``
* ``/_matrix/federation/v1/send_join``
* ``/_matrix/federation/v1/send_leave``
* ``/_matrix/federation/v1/invite``
* ``/_matrix/federation/v1/state``
* ``/_matrix/federation/v1/state_ids``
* ``/_matrix/federation/v1/backfill``
* ``/_matrix/federation/v1/event_auth``
* ``/_matrix/federation/v1/query_auth``
* ``/_matrix/federation/v1/get_missing_events``
Signing Events
--------------
Signing events is complicated by the fact that servers can choose to redact
non-essential parts of an event.
Adding hashes and signatures to outgoing events
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Before signing the event, the *content hash* of the event is calculated as
described below. The hash is encoded using `Unpadded Base64`_ and stored in the
event object, in a ``hashes`` object, under a ``sha256`` key.
The event object is then *redacted*, following the `redaction
algorithm`_. Finally it is signed as described in `Signing JSON`_, using the
server's signing key (see also `Retrieving server keys`_).
The signature is then copied back to the original event object.
See `Persistent Data Unit schema`_ for an example of a signed event.
Validating hashes and signatures on received events
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
When a server receives an event over federation from another server, the
receiving server should check the hashes and signatures on that event.
First the signature is checked. The event is redacted following the `redaction
algorithm`_, and the resultant object is checked for a signature from the
originating server, following the algorithm described in `Checking for a signature`_.
Note that this step should succeed whether we have been sent the full event or
a redacted copy.
The signatures expected on an event are:
* The ``sender``'s server, unless the invite was created as a result of 3rd party invite.
The sender must already match the 3rd party invite, and the server which actually
sends the event may be a different server.
* For room versions 1 and 2, the server which created the ``event_id``. Other room
versions do not track the ``event_id`` over federation and therefore do not need
a signature from those servers.
If the signature is found to be valid, the expected content hash is calculated
as described below. The content hash in the ``hashes`` property of the received
event is base64-decoded, and the two are compared for equality.
If the hash check fails, then it is assumed that this is because we have only
been given a redacted version of the event. To enforce this, the receiving
server should use the redacted copy it calculated rather than the full copy it
received.
.. _`reference hashes`:
Calculating the reference hash for an event
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The *reference hash* of an event covers the essential fields of an event,
including content hashes. It is calculated as follows.
1. The event is put through the redaction algorithm.
2. The ``signatures``, ``age_ts``, and ``unsigned`` properties are removed
from the event, if present.
3. The event is converted into `Canonical JSON`_.
4. A sha256 hash is calculated on the resulting JSON object.
Calculating the content hash for an event
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The *content hash* of an event covers the complete event including the
*unredacted* contents. It is calculated as follows.
First, any existing ``unsigned``, ``signature``, and ``hashes`` members are
removed. The resulting object is then encoded as `Canonical JSON`_, and the
JSON is hashed using SHA-256.
Example code
~~~~~~~~~~~~
.. code:: python
def hash_and_sign_event(event_object, signing_key, signing_name):
# First we need to hash the event object.
content_hash = compute_content_hash(event_object)
event_object["hashes"] = {"sha256": encode_unpadded_base64(content_hash)}
# Strip all the keys that would be removed if the event was redacted.
# The hashes are not stripped and cover all the keys in the event.
# This means that we can tell if any of the non-essential keys are
# modified or removed.
stripped_object = strip_non_essential_keys(event_object)
# Sign the stripped JSON object. The signature only covers the
# essential keys and the hashes. This means that we can check the
# signature even if the event is redacted.
signed_object = sign_json(stripped_object, signing_key, signing_name)
# Copy the signatures from the stripped event to the original event.
event_object["signatures"] = signed_object["signatures"]
def compute_content_hash(event_object):
# take a copy of the event before we remove any keys.
event_object = dict(event_object)
# Keys under "unsigned" can be modified by other servers.
# They are useful for conveying information like the age of an
# event that will change in transit.
# Since they can be modified we need to exclude them from the hash.
event_object.pop("unsigned", None)
# Signatures will depend on the current value of the "hashes" key.
# We cannot add new hashes without invalidating existing signatures.
event_object.pop("signatures", None)
# The "hashes" key might contain multiple algorithms if we decide to
# migrate away from SHA-2. We don't want to include an existing hash
# output in our hash so we exclude the "hashes" dict from the hash.
event_object.pop("hashes", None)
# Encode the JSON using a canonical encoding so that we get the same
# bytes on every server for the same JSON object.
event_json_bytes = encode_canonical_json(event_object)
return hashlib.sha256(event_json_bytes)
.. TODO
[[TODO(markjh): Since the ``hash`` object cannot be redacted a server
shouldn't allow too many hashes to be listed, otherwise a server might embed
illicit data within the ``hash`` object.
We might want to specify a maximum number of keys for the
``hash`` and we might want to specify the maximum output size of a hash]]
[[TODO(markjh) We might want to allow the server to omit the output of well
known hash functions like SHA-256 when none of the keys have been redacted]]
Security considerations
-----------------------
When a domain's ownership changes, the new controller of the domain can masquerade
as the previous owner, receiving messages (similarly to email) and request past
messages from other servers. In the future, proposals like
`MSC1228 <https://github.com/matrix-org/matrix-doc/issues/1228>`_ will address this
issue.
.. |/query/directory| replace:: ``/query/directory``
.. _/query/directory: #get-matrix-federation-v1-query-directory
.. _`Invitation storage`: ../identity_service/%IDENTITY_RELEASE_LABEL%.html#invitation-storage
.. _`Identity Service API`: ../identity_service/%IDENTITY_RELEASE_LABEL%.html
.. _`Client-Server API`: ../client_server/%CLIENT_RELEASE_LABEL%.html
.. _`Inviting to a room`: #inviting-to-a-room
.. _`Canonical JSON`: ../appendices.html#canonical-json
.. _`Unpadded Base64`: ../appendices.html#unpadded-base64
.. _`Server ACLs`: ../client_server/%CLIENT_RELEASE_LABEL%.html#module-server-acls
.. _`redaction algorithm`: ../client_server/%CLIENT_RELEASE_LABEL%.html#redactions
.. _`Signing JSON`: ../appendices.html#signing-json
.. _`Checking for a signature`: ../appendices.html#checking-for-a-signature
.. _`Device Management module`: ../client_server/%CLIENT_RELEASE_LABEL%.html#device-management
.. _`End-to-End Encryption module`: ../client_server/%CLIENT_RELEASE_LABEL%.html#end-to-end-encryption
.. _`room version specification`: ../index.html#room-versions