Getting Started =============== .. image:: http://ansible.cc/docs/_static/ansible_fest_2013.png :alt: ansiblefest 2013 :target: http://ansibleworks.com/fest .. contents:: :depth: 2 :backlinks: top Requirements ```````````` Requirements for Ansible are extremely minimal. Ansible is written for Python 2.6+. If you are running Python 2.5 on an "Enterprise Linux" variant, we'll show you how to add 2.6. Newer versions of Linux and OS X should already have 2.6 or higher. In additon to Python 2.6+, you will want the following Python modules (installed via pip or perhaps via your OS package manager via slightly different names): * ``paramiko`` * ``PyYAML`` * ``jinja2`` If you are using RHEL or CentOS 5 , python is version 2.4 by default, but you can get python 2.6 installed easily. `Use EPEL `_ and install these dependencies as follows: .. code-block:: bash $ yum install python26 python26-PyYAML python26-paramiko python26-jinja2 On the managed nodes, you only need Python 2.4 or later, but if you are are running less than Python 2.6 on them, you will also need: * ``python-simplejson`` .. note:: Ansible's "raw" module (for executing commands in a quick and dirty way) and the script module don't even need that. So technically, you can use Ansible to install python-simplejson using the raw module, which then allows you to use everything else. (That's jumping ahead though.) .. note:: Python 3 is a slightly different language than Python 2 and most python programs (including Ansible) are not switching over yet. However, some Linux distributions (Gentoo, Arch) may not have a Python 2.X interpreter installed by default. On those systems, you should install one, and set the 'ansible_python_interpreter' variable in inventory to point at your 2.X python. Distributions like Red Hat Enterprise Linux, CentOS, Fedora, and Ubuntu all have a 2.X interpreter installed by default and this does not apply to those distributions. This is also true of nearly all Unix systems. If you need to bootstrap these remote systems by installing Python 2.X, using the 'raw' module will be able to do it remotely. Getting Ansible ``````````````` If you are interested in using all the latest features, you may wish to keep up to date with the development branch of the git checkout. This also makes it easiest to contribute back to the project. Instructions for installing from source are below. Ansible's release cycles are about one month long. Due to this short release cycle, any bugs will generally be fixed in the next release versus maintaining backports on the stable branch. You may also wish to follow the `Github project `_ if you have a github account. This is also where we keep the issue tracker for sharing bugs and feature ideas. Running From Checkout +++++++++++++++++++++ Ansible is trivially easy to run from a checkout, root permissions are not required to use it: .. code-block:: bash $ git clone git://github.com/ansible/ansible.git $ cd ./ansible $ source ./hacking/env-setup You can optionally specify an inventory file (see :doc:`patterns`) other than /etc/ansible/hosts: .. code-block:: bash $ echo "127.0.0.1" > ~/ansible_hosts $ export ANSIBLE_HOSTS=~/ansible_hosts You can read more about the inventory file in later parts of the manual. Now let's test things: .. code-block:: bash $ ansible all -m ping --ask-pass Make Install ++++++++++++ If you are not working from a distribution where Ansible is packaged yet, you can install Ansible using "make install". This is done through `python-distutils`: .. code-block:: bash $ git clone git://github.com/ansible/ansible.git $ cd ./ansible $ sudo make install Via Pip +++++++ Are you a python developer? Ansible can be installed via Pip, but when you do so, it will ask to install other dependencies used for optional modes:: $ sudo easy_install pip $ sudo pip install ansible Readers that use virtualenv can also install Ansible under virtualenv. Do not use easy_install to install ansible directly. Via RPM +++++++ RPMs for the last Ansible release are available for `EPEL `_ 6 and currently supported Fedora distributions. RPMs for openSUSE can be found via the `openSUSE Software Portal `_ (in the systemsmanagement Project) for all currently supported openSUSE and SLES distributions. Ansible itself can manage earlier operating systems that contain python 2.4 or higher. If you are using RHEL or CentOS and have not already done so, `configure EPEL `_ .. code-block:: bash # install the epel-release RPM if needed on CentOS, RHEL, or Scientific Linux $ sudo yum install ansible For openSUSE and SUSE Linux Enterprise, add the `systemsmanagement repository `_ for your distribution: .. code-block:: bash # replace $dist with the correct distribution found here: http://download.opensuse.org/repositories/systemsmanagement/ $ sudo zypper ar -f http://download.opensuse.org/repositories/systemsmanagement/$dist/systemsmanagement.repo $ sudo zypper install ansible You can also use the ``make rpm`` command to build an RPM you can distribute and install. Make sure you have ``rpm-build``, ``make``, and ``python2-devel`` installed. .. code-block:: bash $ git clone git://github.com/ansible/ansible.git $ cd ./ansible $ make rpm $ sudo rpm -Uvh ~/rpmbuild/ansible-*.noarch.rpm Python 2.6 EPEL instructions for RHEL and CentOS 5 `````````````````````````````````````````````````` These distributions don't have Python 2.6 by default, but it is easily installable. .. code-block:: bash Via MacPorts ++++++++++++ An OSX port is available via MacPorts, to install the stable version of Ansible from MacPorts (this is the recommended way), run: .. code-block:: bash $ sudo port install ansible If you wish to install the latest build via the MacPorts system from a git checkout, run: .. code-block:: bash $ git clone git://github.com/ansible/ansible.git $ cd ./ansible/packaging/macports $ sudo port install Please refer to the documentation at for further information on using Portfiles with MacPorts. Ubuntu and Debian +++++++++++++++++ Ubuntu builds are available `in a PPA here `_. In Ubuntu 13.04 (raring) its part of the backports repository: .. code-block:: bash $ sudo apt-get install ansible/raring-backports In Debian testing/unstable and Ubntu 13.10+ it is available via .. code-block:: bash $ sudo apt-get install ansible Debian/Ubuntu package recipes can also be built from the source checkout, run: .. code-block:: bash $ make debian Gentoo, Arch, Others ++++++++++++++++++++ Gentoo eBuilds are in portage, version 1.0 `coming soon `_. .. code-block:: bash $ emerge ansible An Arch PKGBUILD is available on `AUR `_ If you have python3 installed on Arch, you probably want to symlink python to python2: .. code-block:: bash $ sudo ln -sf /usr/bin/python2 /usr/bin/python You should also set a 'ansible_python_interpreter' inventory variable for hosts that have python pointing to python3, so the right python can be found on the managed nodes. Tagged Releases +++++++++++++++ Tarballs of releases are available on the ansible.cc page. * `Ansible/downloads `_ These releases are also tagged in the git repository with the release version. Choosing Between Paramiko and Native SSH ```````````````````````````````````````` By default, ansible uses paramiko to talk to managed nodes over SSH. Paramiko is fast, works very transparently, requires no configuration, and is a good choice for most users. However, it does not support some advanced SSH features that folks will want to use. .. versionadded:: 0.5 If you want to leverage more advanced SSH features (such as Kerberized SSH or jump hosts), pass the flag "--connection=ssh" to any ansible command, or set the ANSIBLE_TRANSPORT environment variable to 'ssh'. This will cause Ansible to use openssh tools instead. If ANSIBLE_SSH_ARGS are not set, ansible will try to use some sensible ControlMaster options by default. You are free to override this environment variable, but should still pass ControlMaster options to ensure performance of this transport. With ControlMaster in use, both transports are roughly the same speed. Without CM, the binary ssh transport is signficantly slower. If none of this makes sense to you, the default paramiko option is probably fine. Your first commands ``````````````````` Now that you've installed Ansible, it's time to test it. Edit (or create) /etc/ansible/hosts and put one or more remote systems in it, for which you have your SSH key in ``authorized_keys``:: 192.168.1.50 aserver.example.org bserver.example.org Set up SSH agent to avoid retyping passwords: .. code-block:: bash $ ssh-agent bash $ ssh-add ~/.ssh/id_rsa (Depending on your setup, you may wish to ansible's --private-key option to specify a pem file instead) Now ping all your nodes: .. code-block:: bash $ ansible all -m ping Ansible will attempt to remote connect to the machines using your current user name, just like SSH would. To override the remote user name, just use the '-u' parameter. If you would like to access sudo mode, there are also flags to do that: .. code-block:: bash # as bruce $ ansible all -m ping -u bruce # as bruce, sudoing to root $ ansible all -m ping -u bruce --sudo # as bruce, sudoing to batman $ ansible all -m ping -u bruce --sudo --sudo-user batman (The sudo implementation is changeable in ansbile's configuration file if you happen to want to use a sudo replacement. Flags passed dot sudo can also be set.) Now run a live command on all of your nodes: .. code-block:: bash $ ansible all -a "/bin/echo hello" Congratulations. You've just contacted your nodes with Ansible. It's now time to read some of the more real-world :doc:`examples`, and explore what you can do with different modules, as well as the Ansible :doc:`playbooks` language. Ansible is not just about running commands, it also has powerful configuration management and deployment features. There's more to explore, but you already have a fully working infrastructure! .. seealso:: :doc:`examples` Examples of basic commands :doc:`playbooks` Learning ansible's configuration management language `Mailing List `_ Questions? Help? Ideas? Stop by the list on Google Groups `irc.freenode.net `_ #ansible IRC chat channel