#!/usr/bin/python # -*- coding: utf-8 -*- # # Copyright (C) 2013, Arista Networks # # This program is free software: you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation, either version 3 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program. If not, see . # DOCUMENTATION = ''' --- module: arista_l2interface version_added: "1.2" author: Peter Sprygada short_description: Manage layer 2 interfaces requirements: - Arista EOS 4.10 - Netdev extension for EOS description: - Manage layer 2 interface resources on Arista EOS network devices options: interface_id: description: - the full name of the interface required: true state: description: - describe the desired state of the interface related to the config required: false default: 'present' choices: [ 'present', 'absent' ] logging: description: - enables or disables the syslog facility for this module required: false default: false choices: [ 'true', 'false', 'yes', 'no' ] vlan_tagging: description: - specifies whether or not vlan tagging should be enabled for this interface required: false default: true choices: [ 'enable', 'disable' ] tagged_vlans: description: - specifies the list of vlans that should be allowed to transit this interface required: false untagged_vlan: description: - specifies the vlan that untagged traffic should be placed in for transit across a vlan tagged link required: false default: 'default' notes: - Requires EOS 4.10 or later - The Netdev extension for EOS must be installed and active in the available extensions (show extensions from the EOS CLI) - See http://eos.aristanetworks.com for details ''' EXAMPLES = ''' Example playbook entries using the arista_l2interface module to manage resource state. Note that interface names must be the full interface name not shortcut names (ie Ethernet, not Et1) tasks: - name: create switchport ethernet1 access port action: arista_l2interface interface_id=Ethernet1 logging=true - name: create switchport ethernet2 trunk port action: arista_l2interface interface_id=Ethernet2 vlan_tagging=enable logging=true - name: add vlans to red and blue switchport ethernet2 action: arista_l2interface interface_id=Ethernet2 tagged_vlans=red,blue logging=true - name: set untagged vlan for Ethernet1 action: arista_l2interface interface_id=Ethernet1 untagged_vlan=red logging=true - name: convert access to trunk action: arista_l2interface interface_id=Ethernet1 vlan_tagging=enable tagged_vlans=red,blue logging=true - name: convert trunk to access action: arista_l2interface interface_id=Ethernet2 vlan_tagging=disable untagged_vlan=blue logging=true - name: delete switchport ethernet1 action: arista_l2interface interface_id=Ethernet1 state=absent logging=true ''' import syslog import json class AristaL2Interface(object): """ This is the base class managing layer 2 interfaces (switchport) resources in Arista EOS network devices. This class provides an implementation for creating, updating and deleting layer 2 interfaces. Note: The netdev extension for EOS must be installed in order of this module to work properly. The following commands are implemented in this module: * netdev l2interface list * netdev l2interface show * netdev l2interface edit * netdev l2interface delete """ attributes= ['vlan_tagging', 'tagged_vlans', 'untagged_vlan'] def __init__(self, module): self.module = module self.interface_id = module.params['interface_id'] self.state = module.params['state'] self.vlan_tagging = module.params['vlan_tagging'] self.tagged_vlans = module.params['tagged_vlans'] self.untagged_vlan = module.params['untagged_vlan'] self.logging = module.params['logging'] @property def changed(self): """ The changed property provides a boolean response if the currently loaded resouces has changed from the resource running in EOS. Returns True if the object is not in sync Returns False if the object is in sync. """ return len(self.updates()) > 0 def log(self, entry): """ This method is responsible for sending log messages to the local syslog. """ if self.logging: syslog.openlog('ansible-%s' % os.path.basename(__file__)) syslog.syslog(syslog.LOG_NOTICE, entry) def run_command(self, cmd): """ Calls the Ansible module run_command method. This method will directly return the results of the run_command method """ self.log("Command: %s" % cmd) return self.module.run_command(cmd.split()) def get(self): """ This method will return a dictionary with the attributes of the layer 2 interface resource specified in interface_id. The layer 2 interface resource has the following stucture: { "interface_id": , "vlan_tagging": [enable* | disable], "tagged_vlans": , "untagged_vlan": } If the layer 2 interface specified by interface_id does not exist in the system, this method will return None. """ cmd = "netdev l2interface show %s" % self.interface_id (rc, out, err) = self.run_command(cmd) obj = json.loads(out) if obj.get('status') != 200: return None return obj['result'] def create(self): """ Creates a layer 2 interface resource in the current running configuration. If the layer 2 interface already exists, the function will return successfully. This function implements the following commands: * netdev l2interface create {interface_id} [attributes] Returns the layer 2 interface resource if the create method was successful Returns an error message if there as a problem creating the layer 2 interface """ attribs = [] for attrib in self.attributes: if getattr(self, attrib): attribs.append("--%s" % attrib) attribs.append(getattr(self, attrib)) cmd = "netdev l2interface create %s " % self.interface_id cmd += " ".join(attribs) (rc, out, err) = self.run_command(cmd) resp = json.loads(out) if resp.get('status') != 201: rc = int(resp['status']) err = resp['message'] out = None else: out = resp['result'] return (rc, out, err) def update(self): """ Updates an existing VLAN resource in the current running configuration. If the VLAN resource does not exist, this method will return an error. This method implements the following commands: * netdev l2interface edit {interface_id} [attributes] Returns an updated layer 2 interafce resoure if the update method was successful """ attribs = list() for attrib in self.updates(): attribs.append("--%s" % attrib) attribs.append(getattr(self, attrib)) cmd = "netdev l2interface edit %s " % self.interface_id cmd += " ".join(attribs) (rc, out, err) = self.run_command(cmd) resp = json.loads(out) if resp.get('status') != 200: rc = int(resp['status']) err = resp['message'] out = None else: out = resp['result'] return (rc, out, err) return (0, None, "No attributes have been modified") def delete(self): """ Deletes an existing layer 2 interface resource from the current running configuration. A nonexistent layer 2 interface will return successful for this operation. This method implements the following commands: * netdev l2interface delete {interface_id} Returns nothing if the delete was successful Returns error message if there was a problem deleting the resource """ cmd = "netdev l2interface delete %s" % self.interface_id (rc, out, err) = self.run_command(cmd) resp = json.loads(out) if resp.get('status') != 200: rc = resp['status'] err = resp['message'] out = None return (rc, out, err) def updates(self): """ This method will check the current layer 2 interface resource in the running configuration and return a list of attributes that are not in sync with the current resource. """ obj = self.get() update = lambda a, z: a != z updates = list() for attrib in self.attributes: value = getattr(self, attrib) if update(obj[attrib], value) and value is not None: updates.append(attrib) self.log("Updates: %s" % updates) return updates def exists(self): """ Returns True if the current layer 2 interface resource exists and returns False if it does not. This method only checks for the existence of the interface as specified in interface_id. """ (rc, out, err) = self.run_command("netdev l2interface list") collection = json.loads(out) return self.interface_id in collection.get('result') def main(): module = AnsibleModule( argument_spec = dict( interface_id=dict(default=None, type='str'), state=dict(default='present', choices=['present', 'absent'], type='str'), vlan_tagging=dict(default=None, choices=['enable', 'disable']), tagged_vlans=dict(default=None, type='str'), untagged_vlan=dict(default=None, type='str'), logging=dict(default=False, type='bool') ), supports_check_mode = True ) obj = AristaL2Interface(module) rc = None result = dict() if obj.state == 'absent': if obj.exists(): if module.check_mode: module.exit_json(changed=True) (rc, out, err) = obj.delete() if rc !=0: module.fail_json(msg=err, rc=rc) elif obj.state == 'present': if not obj.exists(): if module.check_mode: module.exit_json(changed=True) (rc, out, err) = obj.create() result['results'] = out else: if obj.changed: if module.check_mode: module.exit_json(changed=obj.changed) (rc, out, err) = obj.update() result['results'] = out if rc is not None and rc != 0: module.fail_json(msg=err, rc=rc) if rc is None: result['changed'] = False else: result['changed'] = True module.exit_json(**result) # import module snippets from ansible.module_utils.basic import * main()