Playbooks

Introduction

Playbooks are a completely different way to use ansible than in task execution mode, and are particularly powerful. Simply put, playbooks are the basis for a really simple configuration management and multi-machine deployment system, unlike any that already exist, and one that is very well suited to deploying complex applications.

Playbooks can declare configurations, but they can also orchestrate steps of any manual ordered process, even as different steps must bounce back and forth between sets of machines in particular orders. They can launch tasks synchronously or asynchronously.

While you might run the main /usr/bin/ansible program for ad-hoc tasks, playbooks are more likely to be kept in source control and used to push out your configuration or assure the configurations of your remote systems are in spec.

Let’s dive in and see how they work. As you go, you may wish to open the github examples directory in another tab, so you can apply the theory to what things look like in practice.

Playbook Language Example

Playbooks are expressed in YAML format and have a minimum of syntax. Each playbook is composed of one or more ‘plays’ in a list.

The goal of a play is map a group of hosts to some well defined roles, represented by things ansible called tasks. At the basic level, a task is nothing more than a call to an ansible module, which you should have learned about in earlier chapters.

By composing a playbook of multiple ‘plays’, it is possible to orchestrate multi-machine deployments, running certain steps on all machines in the webservers group, then certain steps on the database server group, then more commands back on the webservers group, etc.

For starters, here’s a playbook that contains just one play:

---
- hosts: webservers
  vars:
    http_port: 80
    max_clients: 200
  user: root
  tasks:
  - name: ensure apache is at the latest version
    action: yum pkg=httpd state=latest
  - name: write the apache config file
    action: template src=/srv/httpd.j2 dest=/etc/httpd.conf
    notify:
    - restart apache
  - name: ensure apache is running
    action: service name=httpd state=started
  handlers:
    - name: restart apache
      action: service name=httpd state=restarted

Below, we’ll break down what the various features of the playbook language are.

Basics

Hosts and Users

For each play in a playbook, you get to choose which machines in your infrastructure to target and what remote user to complete the steps (called tasks) as.

The hosts line is a list of one or more groups or host patterns, separated by colons, as described in the Inventory & Patterns documentation. The user is just the name of the user account:

---
- hosts: webservers
  user: root

Support for running things from sudo is also available:

---
- hosts: webservers
  user: yourname
  sudo: True

You can also login as you, and then sudo to different users than root:

---
- hosts: webservers
  user: yourname
  sudo: True
  sudo_user: postgres

If you need to specify a password to sudo, run ansible-playbook with --ask-sudo-pass (-K). If you run a sudo playbook and the playbook seems to hang, it’s probably stuck at the sudo prompt. Just Control-C to kill it and run it again with -K.

Important

When using sudo_user to a user other than root, the module arguments are briefly written into a random tempfile in /tmp. These are deleted immediately after the command is executed. This only occurs when sudoing from a user like ‘bob’ to ‘timmy’, not when going from ‘bob’ to ‘root’, or logging in directly as ‘bob’ or ‘root’. If this concerns you that this data is briefly readable (not writeable), avoid transferring uncrypted passwords with sudo_user set. In other cases, ‘/tmp’ is not used and this does not come into play. Ansible also takes care to not log password parameters.

Vars section

The vars section contains a list of variables and values that can be used in the plays, like this:

---
- hosts: webservers
  user: root
  vars:
     http_port: 80
     van_halen_port: 5150
     other: 'magic'

These variables can be used later in the playbook like this:

$varname or ${varname}

The later is useful in the event you need to do something like ${other}_some_string.

Inside templates, the full power of the Jinja2 templating language is also available, which looks like this:

{{ varname }}

The Jinja2 documentation provides information about how to construct loops and conditionals for those who which to use more advanced templating. This is optional and the $varname format still works in template files.

If there are discovered variables about the system, called ‘facts’, these variables bubble up back into the playbook, and can be used on each system just like explicitly set variables. Ansible provides several of these, prefixed with ‘ansible’, and are documented under ‘setup’ in the module documentation. Additionally, facts can be gathered by ohai and facter if they are installed. Facter variables are prefixed with facter_ and Ohai variables are prefixed with ohai_.

So for instance, if I wanted to write the hostname into the /etc/motd file, I could say:

- name: write the motd
  action: template src=/srv/templates/motd.j2 dest=/etc/motd

And in /srv/templates/motd.j2:

You are logged into {{ facter_hostname }}

But we’re getting ahead of ourselves. Let’s talk about tasks.

Tasks list

Each play contains a list of tasks. Tasks are executed in order, one at a time, against all machines matched by the host pattern, before moving on to the next task. It is important to understand that, within a play, all hosts are going to get the same task directives. It is the purpose of a play to map a selection of hosts to tasks.

When running the playbook, which runs top to bottom, hosts with failed tasks are taken out of the rotation for the entire playbook. If things fail, simply correct the playbook file and rerun.

The goal of each task is to execute a module, with very specific arguments. Variables, as mentioned above, can be used in arguments to modules.

Modules are ‘idempotent’, meaning if you run them again, they will make the changes they are told to make to bring the system to the desired state. This makes it very safe to rerun the same playbook multiple times. They won’t change things unless they have to change things.

The command and shell modules will typically rerun the same command again, which is totally ok if the command is something like ‘chmod’ or ‘setsebool’, etc. Though there is a ‘creates’ flag available which can be used to make these modules also idempotent.

Every task should have a name, which is included in the output from running the playbook. This is output for humans, so it is nice to have reasonably good descriptions of each task step. If the name is not provided though, the string fed to ‘action’ will be used for output.

Here is what a basic task looks like, as with most modules, the service module takes key=value arguments:

tasks:
  - name: make sure apache is running
    action: service name=httpd state=running

The command and shell modules are the one modules that just takes a list of arguments, and don’t use the key=value form. This makes them work just like you would expect. Simple:

tasks:
  - name: disable selinux
    action: command /sbin/setenforce 0

The command and shell module care about return codes, so if you have a command who’s successful exit code is not zero, you may wish to do this:

tasks:
  - name: run this command and ignore the result
    action: shell /usr/bin/somecommand & /bin/true

Variables can be used in action lines. Suppose you defined a variable called ‘vhost’ in the ‘vars’ section, you could do this:

tasks:
  - name: create a virtual host file for $vhost
    action: template src=somefile.j2 dest=/etc/httpd/conf.d/$vhost

Those same variables are usable in templates, which we’ll get to later.

Now in a very basic playbook all the tasks will be listed directly in that play, though it will usually make more sense to break up tasks using the ‘include:’ directive. We’ll show that a bit later.

Running Operations On Change

As we’ve mentioned, modules are written to be ‘idempotent’ and can relay when they have made a change on the remote system. Playbooks recognize this and have a basic event system that can be used to respond to change.

These ‘notify’ actions are triggered at the end of each ‘play’ in a playbook, and trigger only once each. For instance, multiple resources may indicate that apache needs to be restarted, but apache will only be bounced once.

Here’s an example of restarting two services when the contents of a file change, but only if the file changes:

- name: template configuration file
  action: template src=template.j2 dest=/etc/foo.conf
  notify:
     - restart memcached
     - restart apache

The things listed in the ‘notify’ section of a task are called handlers.

Handlers are lists of tasks, not really any different from regular tasks, that are referenced by name. Handlers are what notifiers notify. If nothing notifies a handler, it will not run. Regardless of how many things notify a handler, it will run only once, after all of the tasks complete in a particular play.

Here’s an example handlers section:

handlers:
    - name: restart memcached
      action: service name=memcached state=restarted
    - name: restart apache
      action: service name=apache state=restarted

Handlers are best used to restart services and trigger reboots. You probably won’t need them for much else.

Note

Notify handlers are always run in the order written.

Include Files And Encouraging Reuse

Suppose you want to reuse lists of tasks between plays or playbooks. You can use include files to do this. Use of included task lists is a great way to define a role that system is going to fulfill. Remember, the goal of a play in a playbook is to map a group of systems into multiple roles. Let’s see what this looks like...

A task include file simply contains a flat list of tasks, like so:

---
# possibly saved as tasks/foo.yml
- name: placeholder foo
  action: command /bin/foo
- name: placeholder bar
  action: command /bin/bar

Include directives look like this, and can be mixed in with regular tasks in a playbook:

tasks:
 - include: tasks/foo.yml

You can also pass variables into includes. We call this a ‘parameterized include’.

For instance, if deploying multiple wordpress instances, I could contain all of my wordpress tasks in a single wordpress.yml file, and use it like so:

tasks:
  - include: wordpress.yml user=timmy
  - include: wordpress.yml user=alice
  - include: wordpress.yml user=bob

Variables passed in can then be used in the included files. You can reference them like this:

$user

(In addition to the explicitly passed in parameters, all variables from the vars section are also available for use here as well.)

Note

Task include statements are only usable one-level deep. This means task includes can not include other task includes. This may change in a later release.

Includes can also be used in the ‘handlers’ section, for instance, if you want to define how to restart apache, you only have to do that once for all of your playbooks. You might make a handlers.yml that looks like:

----
# this might be in a file like handlers/handlers.yml
- name: restart apache
  action: service name=apache state=restarted

And in your main playbook file, just include it like so, at the bottom of a play:

handlers:
  - include: handlers/handlers.yml

You can mix in includes along with your regular non-included tasks and handlers.

Includes can also be used to import one playbook file into another. This allows you to define a top-level playbook that is composed of other playbooks.

For example:

- name: this is a play at the top level of a file
  hosts: all
  user: root
  tasks:
  - name: say hi
    tags: foo
    action: shell echo "hi..."

- include: load_balancers.yml
- include: webservers.yml
- include: dbservers.yml

Note that you cannot do variable substitution when including one playbook inside another.

Note

You can not conditionally path the location to an include file, like you can with ‘vars_files’. If you find yourself needing to do this, consider how you can restructure your playbook to be more class/role oriented. This is to say you cannot use a ‘fact’ to decide what include file to use. All hosts contained within the play are going to get the same tasks. (‘only_if’ provides some ability for hosts to conditionally skip tasks).

Executing A Playbook

Now that you’ve learned playbook syntax, how do you run a playbook? It’s simple. Let’s run a playbook using a parallelism level of 10:

ansible-playbook playbook.yml -f 10

Tips and Tricks

Look at the bottom of the playbook execution for a summary of the nodes that were executed and how they performed. General failures and fatal “unreachable” communication attempts are kept seperate in the counts.

If you ever want to see detailed output from successful modules as well as unsuccessful ones, use the ‘–verbose’ flag. This is available in Ansible 0.5 and later.

Also, in version 0.5 and later, Ansible playbook output is vastly upgraded if the cowsay package is installed. Try it!

In version 0.7 and later, to see what hosts would be affected by a playbook before you run it, you can do this:

ansible-playbook playbook.yml --list-hosts.

See also

YAML Syntax
Learn about YAML syntax
Playbooks
Review the basic Playbook language features
Advanced Playbooks
Learn about Advanced Playbook Features
Best Practices
Various tips about managing playbooks in the real world
Ansible Modules
Learn about available modules
Module Development
Learn how to extend Ansible by writing your own modules
Inventory & Patterns
Learn about how to select hosts
Github examples directory
Complete playbook files from the github project source
Mailing List
Questions? Help? Ideas? Stop by the list on Google Groups